Hiking Boots/Shoes Recommendations?

Hiking boot recommendations?

Any recommendations for women's hiking shoes?

[Request] Hiking/outdoorsy style shoes that can handle lots of walking on concrete

Cold and wet weather hiking boots recommendations?

I am in need of a new pair of trail/hiking boots.

Hiking Boots for heavy use during the summer

Good pair of hiking shoes?

[Request] waterproof hiking shoes

[request] - Good quality walking shoes.

Hello Redditors. I'm in search of a classy yet extremely durable pair of hiking boots to take backpacking around the world for 12+ months with.

Hiking boots recommendations

Men's three season "urban hiker" (like Merrell MOAB but longer lasting)

BIFL Hiking boots for women

Hiking boots with good traction and can stand up to abuse.

Looking for a good pair of shoes for my weird feet

Request - Hiking Sandals

Request: Hiking Boots

Comfortable and cushiony shoes for walking on pavement 10KM/couple hours a day (UK)

Hiking sandals that last?

[Request] Powerful dishwasher with sanitize function?

I want the best god damned dishwasher money can buy.

Looking for the best, easiest to operate, cheapest dishwasher - Recommendation?

[Request] Best countertop dishwasher for reasonable price?

Can anyone recommend a good dishwasher?

Countertop/Portable Dishwasher

[Request] Dishwasher &lt;$1k Australian with QOL features and low water use

Dishwasher for Second Home

My friend bought a house with this KichenAid dishwasher from 1974. He says it works better than any of the other ones he has owned. He just has to convince his wife not to replace it.

What's a good Panel ready dishwasher under $1k?

Best socket set on the market $100-$150

[Request] Socket wrenches

I need a recommendation for a tool set that should last a lifetime. [Request]

Looking for a Mechanics tool set.

23 years later; GM Goodwrench socket set.

A Starter/Lifetime Tool set

Basic screwdriver set needed

Mechanic Tools that are BIFL

Trying to fill a tool roll for my truck and would like input on BFL tools like wrenches, pliers, socket sets, etc.

BIFL: Mastercraft ratchet set with lifetime warranty. Got it at 14, im 31. Went thru more abuse than you think!

Looking to upgrade my home hand tools

Was told to post this here. Husky 270pc toolset from Home Depot for $99, normally $199. Lifetime warranty too

[Request] Ratchet/Wrench/Etc tool set for home/bicycle/general use

Thoughts on a Honda Accord V6 2007?

2010 Honda Accord worth the buy?

Thoughts on a 2008 Honda accord v6 coupe EX-L?

2014 honda accord ??

After an initial round of research it seems like Honda Accord Hybrid is the right answer, but I want to pressure test that with you guys

2014 Accord V6 Touring (any thoughts?)

Which car ?

me again. 2010 2dr honda accord, 122k miles for $5,800. just want a reliable first car, thoughts?

Want to buy an Accord, any suggestions?

2020/2021 Honda Accord LX - Tell Me About Your Likes/Dislikes

Compact - Midsize suv

best small/midsize suv?

Looking for a used (06-14) reliable compact/mid-size SUV

compact/mid size suv

Midsize SUV

Recommendations for midsized SUVs to look at

Compact to Mid-Size SUV

Small to mid-size suv suggestions?

Midsize vehicle for three kids

Mid-Size SUV

Just tried a Lotus Elise Cup 250, driving impressions !

Dan Neil reviews Lotus Emira: As Good As It Gets

Considering a Lotus Elise - USA

How affordable are Lotus Elises from the 2005-2012 model year?

Lotus Exige Sport Final Edition review: farewell, Exige

I wanna know everything you know about a 2005 Lotus Elise

My Lotus Evora Review

Lotus retail sales up 24% in best performance for a decade

2022 Lotus Emira Looks to Be One of the Brand's Best

PURCHASING A LOTUS — Need Tips + Advice.

Looking for a good rpg/action adventure with a good story and good characters

Deep long rpgs?

Looking for a story-focused RPG

Looking for a complex RPG

Fantasy games with an detailed and immersive world?

[WSIB] I am in search for a open world RPG that will keep me busy for hundreds of hours.

Open world game with huge map, lots of things to do, and great graphics

WSIB Feeling a bit of an rpg lull and want something exciting like old school BioWare with a engaging story that doesn’t take 100 hours to play.

WSIB: long, immersive games with high quality storytelling and writing

looking for an open-world rpg

[WSIB] A turn based strategy game that isn’t 4X

Turn-based strategy game

Turn-based strategy games

[WSIB] Small-scale, medieval, strategy game, featuring pikemen and cavalry

(WSIB) Turn-based ”wargaming” game

[WSIB] Turn Based Strategy games

WSIB if I want a strategy game for dummies

WSIB Strategic Rpg

[WSIB] Good offline strategy/(ish) games?

What are some good "smaller scale to control, but still feel large scale battle" tactical / strategy games?

Bullet Hell-Type Games: Atomicrops vs. I, Dracula: Genesis vs. Others?

WSIB if i want a completely story driven indie game but have already played undertale and oneshot (preferably similar to those 2)

Post apocalyptic enthusiast, Underrail or Atom RPG?

[SIB] Undermine or Atomicrops

WSIB if I like "Run into things, need to grow in power/special items to move further so I come back after unlocking said element" type of games.

Blsoodborne or Resident evil 2 ?

What should I buy? Animal Crossing: New Horizons or Doom: Eternal

[WSIB] Fast-paced top-down roguelikes?

[SIB] I Hate Running Backwards or Planetary Dustoff? Or something else?

SIB Nuclear Throne?

What can you recommend for minimizing pores?

I know you can’t get rid of pores but I’m wondering is there anyway to make them smaller? I use La Roche Posay products. They keep my acne mostly at bay but I feel like my pores are just so large. Part of it is genetic, but just wondering if there’s anything else I can do at home to help. Thanks!

OPEN PORES- WHAT TO DO? IS THERE ANY PRODUCT I CAN USE?

What skincare products have you used that helped with large pores?

What is the best thing to use to tighten pores on your face?

Can anyone tell me why my pores are so huge and what I can do to minimize them?

How to reduce pores.

Hey guys, how do I make my pores not look like this? Info in comments (deleted and reposted for an error in the title)

Pores reduction tips?

Advice for shrinking pores on and around nose?

[sun care] sunscreen that doesn’t irritate rosacea and perioral dermatitis

[Sun Care] Looking for sunscreen that doesn't irritate Rosacea

Sunscreen recommendations for rosacea

Looking for a sunscreen for my acne prone skin.

[Sun Care] looking for a sunscreen that works well for people with Eczema.

Desperate for a good sunscreen

Looking for a Daily Suncreen

I’ve tried them all and I still can’t find my holy grail for my dry rosacea skin. Any other recommendations?

Sunscreen, eczema and makeup, Help [Sun care]

[Sun Care] Help with not being able to use Sunscreen

How can i stop a really greasy face?

How to best defeat oily skin?

Is there any long-lasting solution for oily face?

Oily Face -&gt; Wash Face -&gt; More Oily

Extremely oily skin

Y’all know some sort of cream or product I can buy to make my face less greasy looking?

super oily face help needed

Oily Skin— please help!

Really oily skin

How to have less oily skin?

Adrian Krebs

Johannes Engler

Tavis Lochhead

TechGearLab

The KitchenIQ 50883 Edge Grip 2-Stage is a basic two-stage knife sharpener. We've seen the same design sold under different brands as well. Our lead tester has years of experience with a nearly identical product labeled with a different brand. His experience has been favorable, both with the older one and with the tested Kitchen IQ. The two-stage sharpening system can be used to resurface a rough, badly worn edge or to put a fine hone on a more slightly dulled blade. 
The basic nature of this product has some performance drawbacks. A powered sharpener is way faster, and larger manual sharpeners include more gradations of texture and are easier to manipulate. Such are the tradeoffs you must accept to enjoy the low price of this model. You get significantly more than what you pay for with the Kitchen IQ.

amazon.com

techgearlab.com

 However, I did notice I would have to strike to sharpen my utensils much harder after about a year. Out of the box, this was a 5 star product. I think with a little improved durability it would be even better. But at this price definitely still a great option

 I think with a little improved durability it would be even better. But at this price definitely still a great option.

I liked this a lot better a year ago

 You're basically getting something that will extend the life of all of your knives for the price of a burger, it's a great investment.

 Because when you use it, you'll end up with a bit of powdered metal and fragments. Both on the knife, and the sharpener itself. It's not really noticeable, though you'll see it when you wipe the blade down with a fabric or paper towel. My suggestion is to use the sharpener somewhere that cleanup is easy, maybe even outside

 And just do a very thorough job of cleaning your knife before using it again. Last thing you want is tiny bits of metal in your food. You're basically getting something that will extend the life of all of your knives for the price of a burger, it's a great investment.

Something You Need to Know Before Using

 You can hear the clacking in the next room. To make things worse, my sister used to use a glass cutting board. Glass is harder that most steels and will just pound your edge flat. The best cutting boards are wood or bamboo and scientific studies have shown that wood is more sanitary when tested that glass or plastic

 Tungsten carbide is very close to diamond in hardness and diamong should not necessarily be more expensive. We are talking about a process using vaporized carbon to deposite a layer that is, essentially, diamond. We are not talking about mining anything three miles down in South Africa.  The main advantage of this particular product is that it allows you to get the butt end of the blade fairly close to the rods

 It would be ideal to throw in a backpack or fishing box or to keep in any handy place you plan to do knife sharpening.  Once your carbide or ceramic get chipped or damaged looking, throw the thing away and buy another one. Just by the laws of physics, these types of sharpeners will not last all eternity if put to good use. Also, if you have a really pricey pocket knife and it's already fairly sharp, avoid the tungsten carbide and use the ceramic, the white rods

 Glass is harder that most steels and will just pound your edge flat. The best cutting boards are wood or bamboo and scientific studies have shown that wood is more sanitary when tested that glass or plastic. My sister used to use glass through some concern about germs. Just wash your cutting board and don't scour it with a rough cleaning pad to make micro grooves

Good for small knives like pocket knives.

walmart

Consumer Reports

What we like: Very effective sharpening, allows you to set any angle for sharpening, easy to use, includes coarse and fine stones.

What we don't like: 8-inch chef's knives feel a bit large in the tool, more complicated than most sharpeners to use.

Budget Pick

gearjunkie.com

Talon Sei

Living Survival

Neeves Knives

Work Sharp Tools

Nick Shabazz

Zac In The Wild

Doody’s Daggers

r/knifeclub

r/knives

r/Leatherman

If you are willing to try, look into the Work Sharp Precision Adjust sharpener. It’s a relatively budget friendly sharpening setup, and with some practice/research, sharping 20CV will be no problem

I recently bought a brand new Benchmade Griptillian in 20CV, and the blade edge just completely sucks. The edge is so bad, that I can hardly use it. I couldn't slice a rubber hose with it, which was its first task. It struggles to break down boxes. I couldnt slice the candle wax off of a fancy beer with it last weekend, and this morning I couldn't cut thin rope that was tightly affixed across a package.

There are no local knife sharpeners in my town. I don't own any stones, nor know how to use them, and honestly don't have time to undertake learning that at the moment.  I know I can send it back to Benchmade and have them sharpen it, but honestly, I'm seeing the product of them sharpening it right now, in its brand new out of box condition -- and it sucks.

So, is there anyone on here who runs a reputable sharpening biz? Is there a product I could buy that is dummy proof and will work on 20CV without breaking the bank?

I really like the look and feel of the knife. The blade is perfectly centered, there's no play in it, and I really enjoy everything about it, other than its complete lack of an edge.

<div class="md"><p>I recently bought a brand new Benchmade Griptillian in 20CV, and the blade edge just completely sucks. The edge is so bad, that I can hardly use it. I couldn&#39;t slice a rubber hose with it, which was its first task. It struggles to break down boxes. I couldnt slice the candle wax off of a fancy beer with it last weekend, and this morning I couldn&#39;t cut thin rope that was tightly affixed across a package.</p>

<p>There are no local knife sharpeners in my town. I don&#39;t own any stones, nor know how to use them, and honestly don&#39;t have time to undertake learning that at the moment.  I know I can send it back to Benchmade and have them sharpen it, but honestly, I&#39;m seeing the product of them sharpening it right now, in its brand new out of box condition -- and it sucks.</p>

<p>So, is there anyone on here who runs a reputable sharpening biz? Is there a product I could buy that is dummy proof and will work on 20CV without breaking the bank?</p>

<p>I really like the look and feel of the knife. The blade is perfectly centered, there&#39;s no play in it, and I really enjoy everything about it, other than its complete lack of an edge.</p>
</div>

How to sharpen 20CV

To be clear - this is review is exclusively just my own personal experience with the precision elite setup, and I have no doubt the vast majority of people have no issues with this product granting they aren't primarily sharpening higher-end kitchen blades and aren't prone to stressing over perfection in achieving a mirror finish.  The design itself is great in most ways - it's not made from cheap garbage plastic, the sharpening plates are stellar, and the tri-rod design is substantially better than any other fixed grit sharpener I've seen or used.  Unfortunately there were a few problems with my unit that caused enough of a headache that made this a poor purchase in my case.  I'll be the first to admit I'm far from a grandmaster blade sharpener in any sense, if I were I wouldn't've needed to buy a fancy honing guide - but I've got roughly 5 years under my belt of maintaining primary and secondary chisel bevels to a preferred 20k grit before stropping on 60k compound, so I'm familiar with how it's done

 It might've been the intended use, but it may also prevent me from returning or getting a full refund as well.  I'm somewhat disappointed they didn't include a "blank" tri-rod that would allow you to either plate higher grit plates or stones, possibly a flat side for those who like to use adhesive backed SiC with grits around 2k-20k. There's even a fourth tri-rod slot that's empty when shipped.  It's also somewhat unfortunate that the company hasn't designed a secondary adjustment column that would fit chisels in an appropriate way, and shift the angle adjustment up to 25 or 30-45°

 There's even a fourth tri-rod slot that's empty when shipped.  It's also somewhat unfortunate that the company hasn't designed a secondary adjustment column that would fit chisels in an appropriate way, and shift the angle adjustment up to 25 or 30-45°. Granted, if they kept the magnetic v-clamp base they'd need to include some sort of tension knob to firmly secure it after it's in place.  If I had a unit like this that supported a chisel when I first started out woodworking, I'd wager I'd have saved literal days in time spent trying to halfhazardly reshape the bevel for a chisel I'd dropped on the floor for the second time that day like a dingus

 (Almost always with a honing guide, to be transparent. Excluding strop touch ups.)  In regards to sharpening kitchen blades, the base of the unit isn't weighted at all. Using my (approx

Fantastic Diamond Plates - Great for Small Blades, Iffy For Large

 So here we have a bunch of different grits Which we will get into in a second. And then here's the actual sharpener itself. I really like the use of magnets for that Now when it comes to the actual sharpening we've got a few different choices to pick from here We can start at 220 these actually rotate so then we can go up to 320 and then on this one goes up to 400 They have this little like ball joint on here and this piece of metal actually goes right up inside the stand And then there's a magnet up top here so you just slip that in and then that magnet locks that into place Now typically on the high-end professional sharpeners that I have I want to basically Make a nice long path from the back of the blade all the way out to the tip You can also do it in segments though because we have this pretty pronounced belly here. It's kind of short I'm going to start on 400 and just sort of work this back and forth Now I'm noticing that I'm not actually hitting that sharpie edge on here So what I'm going to do is adjust the angle of this to adjust the angle You can go from 30 all the way down to 100 Adjust the angle you can go from 30 all the way down to 15 probably even a little bit higher and lower Probably going to sharpen this at about a 20 degree angle so I'm going to twist this down That will change the angle now let's try this again Now that is a pretty good angle I don't know if you guys can tell but I've gotten rid of Most of that sharpie there's still a little bit on the tip there so I will work on that And now that I know that my angle is set I can actually sharpen this thing the way that I normally would I should note that I'm really not pushing down on this at all

 It's popping a few hairs there I think this kit is going to be great for anyone like myself who's just a knife enthusiast and you want to have a decent Edge on your blade, but you don't need like a eight hundred dollar professional sharpening system I have something like that And now that I have this I don't even really use it puts a great edge on there if you're not doing it in front Of a camera with a bunch of stuff in your way You can fine tune them even more and get these knives insanely sharp So if you have any questions on it, let me know in the comments down below I'll try to answer anything as best as possible I'll also leave some links in the description where you can pick one of these up on amazon right now starting at forty nine dollars All the way up to I believe 119 which is for the full Elite kit which you just saw me use so that's all for today if you're new here consider clicking subscribe and make new videos every week As always thanks for watching. I'll talk to you in the next one

 I really like the use of magnets for that Now when it comes to the actual sharpening we've got a few different choices to pick from here We can start at 220 these actually rotate so then we can go up to 320 and then on this one goes up to 400 They have this little like ball joint on here and this piece of metal actually goes right up inside the stand And then there's a magnet up top here so you just slip that in and then that magnet locks that into place Now typically on the high-end professional sharpeners that I have I want to basically Make a nice long path from the back of the blade all the way out to the tip You can also do it in segments though because we have this pretty pronounced belly here. It's kind of short I'm going to start on 400 and just sort of work this back and forth Now I'm noticing that I'm not actually hitting that sharpie edge on here So what I'm going to do is adjust the angle of this to adjust the angle You can go from 30 all the way down to 100 Adjust the angle you can go from 30 all the way down to 15 probably even a little bit higher and lower Probably going to sharpen this at about a 20 degree angle so I'm going to twist this down That will change the angle now let's try this again Now that is a pretty good angle I don't know if you guys can tell but I've gotten rid of Most of that sharpie there's still a little bit on the tip there so I will work on that And now that I know that my angle is set I can actually sharpen this thing the way that I normally would I should note that I'm really not pushing down on this at all. I'm not really using much pressure I'm just pinching the top here and then working the edge of the blade just to make a little bit of a burr Now that I've got a decent burr on there push the button in the back and Spin this thing around now I can work on the other side Now I'm noticing that this 400 grit is still pretty rough because I typically don't sharpen down this gritty So the more you use these stones the more they will break in and the better they will get over time So right now this is a little bit rough but we'll make it work Really want to work on that tip make sure everything is nice and even all the way through that belly And now I can alternate sides Doing about 10 passes right now And that should be plenty for the 400 grit Now I'm going to move right up to 600 grit snap that into place Make sure we are on 600. I'm going to flip this again and continue You really want to make sure you get towards the back of the blade as well Widening the edge just a little bit and it's all the way down I'm widening the edge just a little bit and it's already looking a heck of a lot better Now if I rotate this we can move right up to 800 You can already tell that edge is shining through now Definitely hard to tell on video, but I'll give you guys a close-up once we're done Now also on this same stone we have ceramic Flip this and we're going to start to work almost a mirror edge on here The higher in grits you go the more you will notice that the stones start to just glide across there It's a good indication that you are sharpening the way you should be And again, I'm doing like little to no effort

My Favorite Knife Sharpener | Work Sharp Precision Adjust Elite

 This one I was batoning with the other day so it is quite dull so again we're just going to place this in the blade clamp and get it as parallel as we can get it. There we go. Pop that in here. Now I am going to start maybe on a 600 on this one, I don't need to go super course on this one so I'm going to go start with a 600 and see what we get

 There's also a spring button in the back here so that allows you to press that and rotate your knife around to work on the other side. And then you have the tri-bracive sharpening rod. So there's a sharpening rod. You have rubber stoppers here that you can adjust and then you have three different sharpening surfaces here

Worksharp Precision Adjust Knife Sharpener Review

 It looks like it would be very awkward and I too was concerned that a tiny slip could end up with an ER visit for stitches. When holding the handle, there is plenty of room between your hand and the blade to feel safe while sharpening. You would almost have to be intentionally pointing your fingers downward to contact the blade during the push stroke. If your hands get so tired that your fingers are hanging down like that, you need to take a break anyway

 You will have to either hold the sharpener base or the knife handle while using it. I'm not sure why you would need to control the blade when it is clamped into the system, or even what you would do to control it other than hold onto the sharpener base or the knife handle.*****  "2) I'm a little concerned with the direction of travel for the stone being engineered into the edge of the blade with no practical guard on a small curved top stone assembly. This shows very poor engineering controls for safety and would be an OSHA violation in any industrial environment

 I sharpen on a mat so I can't speak to whether or not a minimal amount of dust will make them slippery on a table but on the mat it was not an issue. This is definitely not a one handed sharpener. You will have to either hold the sharpener base or the knife handle while using it. I'm not sure why you would need to control the blade when it is clamped into the system, or even what you would do to control it other than hold onto the sharpener base or the knife handle

 I bought this early Feb 2021 and before reading the review, I was certain that it was going to be missing pieces or some other failed QC. This is not a knock on worksharp's QC, it's because I couldn't imagine anyone that has put hands on the device and used it to sharpen a knife giving it a one star review.  Let's get started. I'm going to copy his numbered complain below in quotes " and then I will follow up my comment starting and ending with 5 stars *****  "1) Base does not have enough grip to keep it from sliding around on the work surface unless you hold it down with one hand

I'm going to do something a little different and address the 1 star review

 In my previous video, I said that the 600 didn't quite feel like a 600. It felt like a higher grip than that. Yet I wanted a different, I would have liked to have a stone in between the 600 and the ceramic, because I didn't feel like the ceramic, it wasn't able to get out all the scratches without a long, long time. You have to spend a lot of time on the ceramic stone to get it to be polished, basically

 I'm trying to get the grit pattern nice and flat like that. I'm trying to get the grit pattern nice and flat like that, nice and consistent. Now here's another, this is a mirror edge, but this one has been used since I sharpened it. But this is basically what I'm trying to get with that ceramic

 If you have a stropping compound system that does that, you can get it really nice and consistent because you can just strop basically some of the scratch pattern away. But I do think this system is very good. I do think that it will work for a lot of people. You just gotta be careful, like I said, with the movement and know that your stones aren't gonna last a very long time

 I do think that it will work for a lot of people. You just gotta be careful, like I said, with the movement and know that your stones aren't gonna last a very long time. You will get, I'm imagining that if you're not doing a bunch of reprofiling and you're just sharpening the same angle that's on the blade, you could probably get about 50 sharpening's out of it altogether, which, and then like that, you know, that's difficult to say too. I don't know if you'll get quite that many because it depends on your pressure, you know, the steel of the knives you're sharpening

LONG TERM UPDATE WORK SHARP PRECISION ADJUST SHARPENER

 This knob is the providing the force that holds the the knife in place It's basically making these two jaws on either side clamped down around the thing It's not so dissimilar from how a number of these other sharpening systems have done that but you know Yeah, and then what you do is you actually you want to make sure that the white dot is on top Apparently is their approach. My main conclusion here is that oh my god This is a gem wow And in fact, this is now my recommendation and it has been as i've been working on this review For a sharpening system in that sort of low to mid range, right? Um, of course you can do really well just with a bench stone if you're willing to put in the time and the effort to learn Just a a good old-fashioned stone Like this guy happens to be from a spyderco, but a good old-fashioned stone will give you great results And you can really do a great job sharpening It's not the case that you need something like this to sharpen a knife clearly a civilization has taught us otherwise But at the same time, uh in terms of you know, i'm brand new to sharpening and I just want good results This is a very very nice approach, right? So if you don't want to go that bench stone route where you can't get it a little cheaper This is where I would have you start. I would say save up and get this particular piece here Right, um because saving up to this at 50 bucks is a better choice than any of the other cheaper systems out there That i'm aware of right now And if you buy this uh, this kit here and you get yourself a decent leather straw It's just a literally a stick with a piece of leather with some compound on it Then by god you are going to be able to put an amazing edge on your knives and you'll be able to keep it there for a Long time this will sharpen as well as you possibly need and with a strop to maintain that edge You will be very very happy. I suspect with the sharpness of your tools, right? Down the road though

 I would say save up and get this particular piece here Right, um because saving up to this at 50 bucks is a better choice than any of the other cheaper systems out there That i'm aware of right now And if you buy this uh, this kit here and you get yourself a decent leather straw It's just a literally a stick with a piece of leather with some compound on it Then by god you are going to be able to put an amazing edge on your knives and you'll be able to keep it there for a Long time this will sharpen as well as you possibly need and with a strop to maintain that edge You will be very very happy. I suspect with the sharpness of your tools, right? Down the road though. Maybe you go deeper into the knife hobby. Do not go deeper into the knife hobby Oh my god But nonetheless if you down the road decide you want to be fancier you you want to you know more precision more mirror more etc Uh, or you just want something that's a cooler looking object You know Then you might go up to something like a kme or a half stone or something like that down the road It'll get you a little bit more precision a little bit more polish and more choices in stones Is the other big thing right this doesn't let you swap out stones, you know If I wanted to use a chocera water stone is I don't think this is a standard size Um, so you wouldn't be able to use that but at the same time, uh, this is really good I'm not selling the kme here right that that to me is an upgrade but honestly That's because i'm not just content with sharp if all I was looking to do was make sharp This could you know do all of my sharpening for me

 You want to check it out I said absolutely I do but as always I'm gonna talk about the good the great the bad the ugly might be a gem Might be junk sent him the full disclaimer on my website and they still sent it along Nonetheless, we have to assume this is the very best quality controlled one of these systems ever And I'm doing my best not to let that affect the nature or quality of my review But there you go full disclosure next thing. Let's do some size comparison real quick. Yeah, this guy It's a little weird with a sharpening system But I'll go ahead and I'll show you in terms of Spydeco Delicas, which is a standardized unit of measure Um, this guy is about it's a little bit taller than a Delica worth Fully extended there and the overall size of it with the knife clamped into the thing It you know, you can get that rough sense I'm here it is it next to a KME sharpening system What we see here is that this guy is considerably bigger than the KME of the little KME unit is is definitely smaller Although once you add in bases and things like that, it gets a little bit It gets a little bit bigger And then the other thing that's maybe worth comparing size wise is this is one of the stones from the KME sharpening system And what we see here is that the stones on this guy are markedly thinner Um, this is actually an advantage when you're dealing with recurves, but it's a disadvantage when you're trying to hog off a lot of material So, um, there is the relevant size comparisons, of course And then actually, you know, it might be worth just doing a very quick demo rigging this guy up and showing you how it works We can go on ahead and we'll use yeah. Sure

The WorkSharp Precision Adjust Knife Sharpener: The Full Nick Shabazz Review

expert-review

Work Sharp Precision Knife Sharpener Review: Razor-Like Edges on a Budget

KitchenIQ 50883 Edge Grip 2-Stage vs Work Sharp Precision Adjust

QUICK QUESTION!

You might also like