Sovol SV01

It goes together quickly and it does a good job of printing and since you can generally pick it up for under two hundred eighty dollars and sometimes ...

Looking for a solid direct drive printer, don't really want more than 220mm^3. Considering artillery genius pro and sovol sv01, don't know any others.

I've been printing for 7 years on a prusa i3 and ender 3. I had trouble keeping the bed level and auto leveled. Instructions never specified that there was 4 small set screws on extruder 2 to allow for the z axis adjustment AFTER seeting bed level with extruder 1. So i ended up prying it upband down...

I didn't like mine and I'm in the process of getting rid of it. Look into the following: Artillery Genius, Sovol SV01, Artillery Hornet, Anycubic Vyper. Those printers should be drastic improvements over the Ender 3 and will last and print better, while also being more worth it for their money.

If you are going to setup the SV01 in the garage or a spare bedroom with a thick door, then I enthusiastically recommend it. For you, the rating would be 5 stars. If, however, you will be using it in a room where you spend time, then I cannot recommend it. Get a 3d printer that is quieter. For you, ...

I don't play that game. After getting it running, I tried printing some PETG because I don't want to mess with my Sovol SV01 and convert it to all-metal and I thought the Replicator would be a good high-temp machine. I was wrong :( Makerbots are locked down in software (the 2X has been abandoned by Makerbot so you get to worry about that too) and parts are nonexistent if you don't know how to spec generics. I'm still messing with it because it's in my basement now, but I won't touch another makerbot ever.

Got the printer yesterday, inventory revealed 4 screws and T-Nuts that didn't match the diagram, when attempting to use the screws and t-nuts, the screws were too long and would start driving into the printer frame. Ended up having the exact replacement screws called out in the dragram and was able ...

Ignore everyone telling you to get an ender 3 v2 and get a SOVOL SV01 instead. Direct drive is a billion times better than Bowden tube and the build volume is much bigger. Install a firmware that has linear advance enabled (not supported by ender 3 v2) and calibrate it and it will print as well as a Prusa mk3s.

I own a sovol 3 and then decided to get the sovol 1 Product is horrible all the sovol printers I purchased had something wrong with them. Either they had thermal runaway issues (with the extruder or bed ) the nozzle breaks off during replacement (despite following their detailed instructions) or eve...

Looks like I can get a new Sovol SV01 for about $240. Looking for something that can print ABS out of the box, shouldn't be too difficult to upgrade to the point of printing nylon or polycarbonate (replacement going to an all metal hot end), and I'd like to run it using Octoprint. I don't mind tinkering with it occasionally.