Cooler Master Hyper 212 Evo vs Scythe Mugen 5 A RGB

It is a little bit fiddly working out which bit is which but certainly once you've got the bits done and you're kind of a little bit used to it, absol...

It's behind the highest performance coolers by a couple of degrees, and above budget coolers by a couple of degrees. The Mugen 5 ARGB actually seems t...

Bought one. Going to pair this with a EVGA Z370 Micro I scored for $75.99 brand new on clearance a few days ago on EVGA's website. Also got a Cooler master hyper 212 black edition for $35

I will see if they can send me a Stud Nut 8 screw for the 115X series of Intel processors so I can screw it correctly down to the motherboard. I can update my review if I am sent the correctlythreaded "Stud Nut 8" to correctly complete the installation.

Purchased this CPU Cooler due to my CPU running hot as of late. It is a 6-year old computer with an AMD Phenom II X2 550 Black CPU running at up to 3100 MHz and I don’t overclock. Not sure if it was due to the age of my CPU, or the Stock CPU cooler, or maybe background software conflicts causing stress on the CPU. But it was reaching 70+ deg

Since I took that measurement, I did let my motherboard automatically tune the CPU to what it thought would be a safe and reasonable overclock, so the temp may be a bit higher now. That took me from 3800MHz to 4000MHz, and it seems to be doing just fine under those circumstances. My final thought is that mounting the fan to the heatsink was trickier than it should have been. The directions were fantastic, EXCEPT for the part where they show the clips going on to the fan, and how it should be attached to the heatsink

12 ST3500418AS 500GB, Seagate 1TB kit ST310005N1A1AS-NK, in a Cooler Master Elite RC-330. I moved the stock Cooler Master 12cm case fan to the front, & added a Thermaltake A1280 to the rear exhaust position. With the nearly solid mesh front, this gives a straight-thru air flow, w/ the HDDs located one in the lowest slot, and the other higher than the top of the front fan. All cables were rerouted for max airflow

We're gonna be doing our installation on an Intel z4 90 system So this installation should be pretty much the same across all of Intel 1150, 1151, 115...

Everyone's favorite air cooler is getting some really useful design upgrades. So I'm going to go through the three main design changes to Cooler Maste...

It's Mougan. All right snow So are you convinced now? Yeah, okay So let's get on with it with the review. So the Mougan series has been around forever...

This isn't a quiet fan. None of them (that I bought) are. Of course, the speed can be adjusted, but it doesn't quiet it down much at all, & too low will have the temps rise quickly, needing more flow & speed. So I knock off one star for that, because it's 2020, & quiet fans are as common as quiet mice & keyboards

So if you are annoyed by your Ryzen stock cooler's incessant revving, this would be a possible fix. The thermals might not be the best in its class among air coolers running at full capacity for overclocked, power hungry CPUs, but due in part to having a single fan the noise level certainly is best in class.