Hiking Boots/Shoes Recommendations?

Hiking boot recommendations?

Any recommendations for women's hiking shoes?

[Request] Hiking/outdoorsy style shoes that can handle lots of walking on concrete

Cold and wet weather hiking boots recommendations?

I am in need of a new pair of trail/hiking boots.

Hiking Boots for heavy use during the summer

Good pair of hiking shoes?

[Request] waterproof hiking shoes

[request] - Good quality walking shoes.

Hello Redditors. I'm in search of a classy yet extremely durable pair of hiking boots to take backpacking around the world for 12+ months with.

Hiking boots recommendations

Men's three season "urban hiker" (like Merrell MOAB but longer lasting)

BIFL Hiking boots for women

Hiking boots with good traction and can stand up to abuse.

Looking for a good pair of shoes for my weird feet

Request - Hiking Sandals

Request: Hiking Boots

Comfortable and cushiony shoes for walking on pavement 10KM/couple hours a day (UK)

Hiking sandals that last?

[Request] Powerful dishwasher with sanitize function?

I want the best god damned dishwasher money can buy.

Looking for the best, easiest to operate, cheapest dishwasher - Recommendation?

[Request] Best countertop dishwasher for reasonable price?

Can anyone recommend a good dishwasher?

Countertop/Portable Dishwasher

[Request] Dishwasher &lt;$1k Australian with QOL features and low water use

Dishwasher for Second Home

My friend bought a house with this KichenAid dishwasher from 1974. He says it works better than any of the other ones he has owned. He just has to convince his wife not to replace it.

What's a good Panel ready dishwasher under $1k?

Best socket set on the market $100-$150

[Request] Socket wrenches

I need a recommendation for a tool set that should last a lifetime. [Request]

Looking for a Mechanics tool set.

23 years later; GM Goodwrench socket set.

A Starter/Lifetime Tool set

Basic screwdriver set needed

Mechanic Tools that are BIFL

Trying to fill a tool roll for my truck and would like input on BFL tools like wrenches, pliers, socket sets, etc.

BIFL: Mastercraft ratchet set with lifetime warranty. Got it at 14, im 31. Went thru more abuse than you think!

Looking to upgrade my home hand tools

Was told to post this here. Husky 270pc toolset from Home Depot for $99, normally $199. Lifetime warranty too

[Request] Ratchet/Wrench/Etc tool set for home/bicycle/general use

Thoughts on a Honda Accord V6 2007?

2010 Honda Accord worth the buy?

Thoughts on a 2008 Honda accord v6 coupe EX-L?

2014 honda accord ??

After an initial round of research it seems like Honda Accord Hybrid is the right answer, but I want to pressure test that with you guys

2014 Accord V6 Touring (any thoughts?)

Which car ?

me again. 2010 2dr honda accord, 122k miles for $5,800. just want a reliable first car, thoughts?

Want to buy an Accord, any suggestions?

2020/2021 Honda Accord LX - Tell Me About Your Likes/Dislikes

Compact - Midsize suv

best small/midsize suv?

Looking for a used (06-14) reliable compact/mid-size SUV

compact/mid size suv

Midsize SUV

Recommendations for midsized SUVs to look at

Compact to Mid-Size SUV

Small to mid-size suv suggestions?

Midsize vehicle for three kids

Mid-Size SUV

Just tried a Lotus Elise Cup 250, driving impressions !

Dan Neil reviews Lotus Emira: As Good As It Gets

Considering a Lotus Elise - USA

How affordable are Lotus Elises from the 2005-2012 model year?

Lotus Exige Sport Final Edition review: farewell, Exige

I wanna know everything you know about a 2005 Lotus Elise

My Lotus Evora Review

Lotus retail sales up 24% in best performance for a decade

2022 Lotus Emira Looks to Be One of the Brand's Best

PURCHASING A LOTUS — Need Tips + Advice.

Looking for a good rpg/action adventure with a good story and good characters

Deep long rpgs?

Looking for a story-focused RPG

Looking for a complex RPG

Fantasy games with an detailed and immersive world?

[WSIB] I am in search for a open world RPG that will keep me busy for hundreds of hours.

Open world game with huge map, lots of things to do, and great graphics

WSIB Feeling a bit of an rpg lull and want something exciting like old school BioWare with a engaging story that doesn’t take 100 hours to play.

WSIB: long, immersive games with high quality storytelling and writing

looking for an open-world rpg

[WSIB] A turn based strategy game that isn’t 4X

Turn-based strategy game

Turn-based strategy games

[WSIB] Small-scale, medieval, strategy game, featuring pikemen and cavalry

(WSIB) Turn-based ”wargaming” game

[WSIB] Turn Based Strategy games

WSIB if I want a strategy game for dummies

WSIB Strategic Rpg

[WSIB] Good offline strategy/(ish) games?

What are some good "smaller scale to control, but still feel large scale battle" tactical / strategy games?

Bullet Hell-Type Games: Atomicrops vs. I, Dracula: Genesis vs. Others?

WSIB if i want a completely story driven indie game but have already played undertale and oneshot (preferably similar to those 2)

Post apocalyptic enthusiast, Underrail or Atom RPG?

[SIB] Undermine or Atomicrops

WSIB if I like "Run into things, need to grow in power/special items to move further so I come back after unlocking said element" type of games.

Blsoodborne or Resident evil 2 ?

What should I buy? Animal Crossing: New Horizons or Doom: Eternal

[WSIB] Fast-paced top-down roguelikes?

[SIB] I Hate Running Backwards or Planetary Dustoff? Or something else?

SIB Nuclear Throne?

What can you recommend for minimizing pores?

I know you can’t get rid of pores but I’m wondering is there anyway to make them smaller? I use La Roche Posay products. They keep my acne mostly at bay but I feel like my pores are just so large. Part of it is genetic, but just wondering if there’s anything else I can do at home to help. Thanks!

OPEN PORES- WHAT TO DO? IS THERE ANY PRODUCT I CAN USE?

What skincare products have you used that helped with large pores?

What is the best thing to use to tighten pores on your face?

Can anyone tell me why my pores are so huge and what I can do to minimize them?

How to reduce pores.

Hey guys, how do I make my pores not look like this? Info in comments (deleted and reposted for an error in the title)

Pores reduction tips?

Advice for shrinking pores on and around nose?

[sun care] sunscreen that doesn’t irritate rosacea and perioral dermatitis

[Sun Care] Looking for sunscreen that doesn't irritate Rosacea

Sunscreen recommendations for rosacea

Looking for a sunscreen for my acne prone skin.

[Sun Care] looking for a sunscreen that works well for people with Eczema.

Desperate for a good sunscreen

Looking for a Daily Suncreen

I’ve tried them all and I still can’t find my holy grail for my dry rosacea skin. Any other recommendations?

Sunscreen, eczema and makeup, Help [Sun care]

[Sun Care] Help with not being able to use Sunscreen

How can i stop a really greasy face?

How to best defeat oily skin?

Is there any long-lasting solution for oily face?

Oily Face -&gt; Wash Face -&gt; More Oily

Extremely oily skin

Y’all know some sort of cream or product I can buy to make my face less greasy looking?

super oily face help needed

Oily Skin— please help!

Really oily skin

How to have less oily skin?

Adrian Krebs

Johannes Engler

Tavis Lochhead

New to the range, Black Ridge Ventirad - 120mm will satisfy many people. Mainly aimed at demanding players, this equipment will meet your expectations.

pccasegear.com

Optimum Tech

Tech Legend

r/sffpc

r/Amd

 The second test uses the AIDA64 Extreme Stability Test benchmark, which creates an unrealistically high CPU load. This type of load will not be encountered in any scenario in your daily life, games or even video rendering. The purpose of this test is to just push its CPU cooler to its very limit and see the cooling potential, and in this test our cooler reached a maximum temperature of 98°C with the factory fan installed. I was also talking about those alternative modes that you can have with this cooler and to get as much performance as I could, I decided to install an additional 120mm fan above the heatsink

 The active cooling is done by a single 92mm fan, which is also slim, with a thickness of just 15mm. This fan is made by Applephone and has a minimum speed of 800rpm and a maximum speed of 2800rpm. It also uses a single 4-pin connector for power, with an all-black cable that is unfortunately not sleeved. One important feature of the Blackreach cooler is that it can be used in different modes for different purposes

 It also uses a single 4-pin connector for power, with an all-black cable that is unfortunately not sleeved. One important feature of the Blackreach cooler is that it can be used in different modes for different purposes. You can install a regular 120mm fan at the top of the heatsink for optimal cooling and by the way Applephone calls this the overclocking mode or you can use a slim 120mm fan on the underside of the heatsink, if you have room that is. Installing this cooler is fairly easy, you select the correct brackets for your platform and attach them to the side of the baseplate of the cooler, using two small screws

 The Apple Phone Black Ridge is certainly an interesting CPU cooler that has a good performance, but as all small CPU coolers it has a limit of how much heat it can dissipate. This means one simple thing, that you will not overclock an Intel i9-9900K CPU with this cooler. It is not a question of build quality or the number of fans or how fast they spin, you simply need more cooling surface area for CPUs that can easily go above 150W of TDP when overclocked. Now that we agreed on that subject, we can talk about the Black Ridge cooler, and it is a good CPU cooler with a great build quality, however it is not for everyone, as it has plenty of limitations thanks to its peculiar shape and mounting system

Alpenföhn Black Ridge - CPU Cooler Review

It's a Dan A4 with Alpenfohn Black Ridge cooler, i5 11600K, a 6600XT and an MSI Spatium 1TB ssd (arguably the best thing about this build since it's sooooo damn fast. Coming from a spacious Cooler Master H500, I was honestly really impressed with the thermals here! Sure I tweaked the fan curve since I don't mind her getting a bit loud, but the 6600XT is 55° under max load, and the CPU rarely hitting 70° except for Prime95, which brought it to 100° (didn't throttle though). I'm literally so glad I can fit my PC in my backpack along with my Macbook!

Feels good to be bringing my Dan A4 to school and just game

Cooler: Alpenfohn Black Ridge (had to be modified with a dremel to clear the motherboard, feels bad man). Has a 120mm slim (15mm) Arctic fan, thankfully the sides are acrylic so had some bend to them. Also had to remove the choker of a heatsink on the nvme drives but temps seem absolutely fine atm.

 But yeah, definitely under 50mm in height, this is the cooler to get. Also, if you have a Dan A4 SFX, I mean, it's a pretty much a no-brainer there. It was designed by the creator of the Dan A4 after all. The only better option there would be the 92mm AIO, but not everyone wants to go down that route

 For reference, many competing low profile coolers use four heat pipes. So on paper, at least the Blackridge does have an advantage. The most important spec worth mentioning, though, is the height of the low profile cooler itself, seeing as this will limit what cases are compatible. And I can only really think of two, maybe three cases off the top of my head that aren't compatible with the Alpenfoam Blackridge

 If you have a Velcro 5, this is the cooler to get. If you have any case that requires a CPU cooler that's under 50mm in height, even under 60mm in height, I would consider this. But yeah, definitely under 50mm in height, this is the cooler to get. Also, if you have a Dan A4 SFX, I mean, it's a pretty much a no-brainer there

 You've got the stock configuration out of the box with the stock 92 mil fan underneath. Then if you have some VLP or very low profile memory dims handy, you can swap that out for a high performing slim 120 mil fan. Or if you have the additional clearance available, you can mount a 120 mil fan on top of the cooler, whether that's a slim fan or full sized fan depends on your clearance. The mounting brackets are also included in the box, and they're nice and easy to use, too, both for the slim and full sized fans

Low Profile Noctua Killer? Alpenfohn Black Ridge

amazon.com

yotpo

THE CRYORIG C7 CU AT A GLANCE Mini top-down-style CPU cooler, made entirely of copper for optimum cooling performance Designed for compatibility with larger RAM modules Low height of just 47 mm Compatible with all current AMD- and Intel sockets Straightforward installation

HeavyTek

Nicolas11x12 English

Tech By Matt

TekTick

 We have a total of 4 6mm heatpipes intertwined between 57 copper fins in an S shape from one opposite end to another, making contact in the middle with a pretty smooth nickel plate copper CPU base and taking the heat off of it and dissipating it further. That said, it can handle up to 150 watts of TDP. The 92mm fan comes in this white and grey colour scheme and has a 4 pin PWM header and can spin up to 2500 RPM. It's easily removable from the top of the heatsink, it has these two clips on each side, so if you want to you can remove it so you can clear the air for the process of installation just like I did

 The bottom bracket itself already has all the necessary holes to cover these sockets, so you don't have to do anything around it, just align it properly, put it on and screw everything down. The heatsink itself wasn't showing more than 35 to 36 degrees Celsius on my thermometer gun and was basically just warm to the touch. That's a pretty decent performance from a so to speak small footprint CPU air cooler like this one. But there is a catch, I have noticed that the motherboard's default fan curve ramped up the fan speed pretty high to begin with, making it pretty noticeable sound wise and also bumping the performance a bit

 That's a pretty decent performance from a so to speak small footprint CPU air cooler like this one. But there is a catch, I have noticed that the motherboard's default fan curve ramped up the fan speed pretty high to begin with, making it pretty noticeable sound wise and also bumping the performance a bit. In idle that was around 1800 to 1900 RPM, while under load it was around 2300 to 2400 RPM. Here's an audio snippet of how loud that was as well as a visual representation through my noisemeter

THIS Thing Is HEAVY - Cryorig C7 Cu Review

And obviously there will be thermal throttling, that poor Cryorig c7/ Noctua L9a stands no chance of cooling 140 watts unless there is some extreme airflow. That said, the performance is stellar under the circumstances, with no throttling for lower-core workloads (like games) and shorter all-core workloads (like code compile), and is still also very good for extended all-core workloads (higher than putting a 5900x or 5800x under the same cooler for instance). Other than that my entire case was probably around 60 celcius after extended use which was probably okay but a little concerning, though if there were some way to get additional airflow exhausting all the hot air through the case you might have a better time.

I'm using the  SFF time P-ATX  10 L case which has a  CPU clearance of up to 59 mm in height.

\- the cooler that I'm thinking of getting is this with these mods:

Cryorig C7 Cu:

[https://www.newegg.com/cryorig-c7-cu/p/13C-000U-00061?Description=cryorig%20c7%20copper&amp;cm\_re=cryorig\_c7\_copper-\_-9SIA4UF6HN5537-\_-Product](https://www.newegg.com/cryorig-c7-cu/p/13C-000U-00061?Description=cryorig%20c7%20copper&amp;cm_re=cryorig_c7_copper-_-9SIA4UF6HN5537-_-Product)

&amp;#x200B;

 with this mod that makes it fit a Noctua 92mm fan or maybe even a 120 mm:

[https://j-hackcompany.com/?product=92mm-fan-adapter-for-cryorig-c7](https://j-hackcompany.com/?product=92mm-fan-adapter-for-cryorig-c7)

&amp;#x200B;

if there are better air coolers or maybe even liquid coolers that are better than what I linked and will fit my case then plz comment.

<div class="md">I&#39;m using the SFF time P-ATX 10 L case which has a CPU clearance of up to 59 mm in height.

case:

<a href="https://www.sfftime.com/product-page/p-atx-v2-white">https://www.sfftime.com/product-page/p-atx-v2-white</a>

&#x200B;

- the cooler that I&#39;m thinking of getting is this with these mods:

Cryorig C7 Cu:

<a href="https://www.newegg.com/cryorig-c7-cu/p/13C-000U-00061?Description=cryorig%20c7%20copper&amp;cm_re=cryorig_c7_copper-_-9SIA4UF6HN5537-_-Product">https://www.newegg.com/cryorig-c7-cu/p/13C-000U-00061?Description=cryorig%20c7%20copper&amp;cm_re=cryorig_c7_copper-_-9SIA4UF6HN5537-_-Product</a>

&#x200B;

with this mod that makes it fit a Noctua 92mm fan or maybe even a 120 mm:

<a href="https://j-hackcompany.com/?product=92mm-fan-adapter-for-cryorig-c7">https://j-hackcompany.com/?product=92mm-fan-adapter-for-cryorig-c7</a>

&#x200B;

if there are better air coolers or maybe even liquid coolers that are better than what I linked and will fit my case then plz comment.
</div>

[SFF time P-ATX] What is the best low-profile cooler that can cool the AMD Ryzen 9 5950X?

 As far as I can see, we are getting the same 2500rpm fan that we got on the original C7, so it's fair to say that the noise testing will be interesting. The entire heatsink has been converted to copper here also, that includes the cold plate, the four heatpipes, and the entire fin stack. I personally expected the premium over the aluminium C7 to be a bit more, but it's only about an additional $20, so it's great to see that solely based on price, this is a competitive option. Now, I could have just tested the copper C7 against the aluminium C7 and called it a day and left the comparisons there, but I'm personally really interested to see how it stacks up against some of Noctua's low-profile options, like the NH-L9 and the L9x65, and also the L12s

 Overall, the cryo recoolers are not quiet at all, and running them at full blast is going to be extremely noticeable and not recommended. The Noctua coolers on the other hand are significantly quieter, and while not exactly inaudible, they at least don't sound like a jet engine like the C7 does. So if you are concerned about acoustics in your system, I can highly recommend picking up the NF-A9x14 PWM fan as that will improve noise levels significantly without a significant hit on CPU thermals. Mounting this fan on top of the copper C7 heatsink on the cryo recooler seems like a really effective but also relatively quiet CPU cooling solution

 So let's first take a look at the results with the i5-8400, and honestly, there isn't much of a difference here between the majority of coolers in the stack. For example, even the warmest result here by the smallest CPU cooler, the NH-L9, still manages to cool the i5-8400 to 66.6°C after 15 minutes of rendering out a scene in Blender. The difference between the copper C7 and the regular C7 is also very minimal here, both at 2000rpm and 2500rpm

 The NH-L12 gives us the best cooling performance in the stack, as most of you probably expected since it is the largest, but cooling the i5 CPU to below 55°C is arguably a bit overkill. Stepping up to the stock 8700K now, and keep in mind this CPU has been deleted which dropped the temperature under load by about 13°C. I am also running the 8700K on auto in terms of clock speeds which results in an all core turbo of 4.3GHz, and I've manually locked the voltage to 1

Cryorig's Copper C7 - The Ultimate Low Profile CPU Cooler?

 What's going on guys, this is Matt and upgrading from the stock Intel cooler or from one of the older stock AMD coolers can be pretty enticing, especially after seeing temps and hearing the noise under intense load. Though there are a lot of great budget options for around $20 or so, one of the biggest problems is compatibility with other components like RAM, GPU, and even the side panel, any of which would be pretty easily overlooked by someone new to PC building or someone picking parts in a hurry. So what if there was an aftermarket cooler that not only offered far superior cooling to the stock cooler, but was also guaranteed to fit? Well that's where the Cryorig C7 comes into play. This is a compact, sleek, and relatively affordable cooler that takes aim at the tiny and barely adequate stock coolers all around the world

 They're both sized similarly and are guaranteed to fit. The biggest difference between the two is that the C7 includes copper and the stock Intel cooler does not. The copper in both the baseplate and the heat pipes allows for much more heat to be dissipated than using aluminum alone. Not only this but the stock Intel cooler uses pre applied thermal paste that's been sitting around for who knows how long

 It runs cooler and quieter meaning your overall computing experience could be improved by a fair margin. So yeah guys I think this wraps this video up I hope you guys enjoyed it if you did make sure to give this video a big thumbs up as well as consider subscribing for more PC and tech related content in the future. And as always this is Matt from Tech by Matt signing out.

 So what if there was an aftermarket cooler that not only offered far superior cooling to the stock cooler, but was also guaranteed to fit? Well that's where the Cryorig C7 comes into play. This is a compact, sleek, and relatively affordable cooler that takes aim at the tiny and barely adequate stock coolers all around the world. So is the Cryorig C7 truly a stock cooler killer, or is it just an overpriced hunk of metal with a fan attached? Let's find out. So let's start out with the basics, what is this thing? Well the Cryorig C7 is a compact CPU heatsink that's designed to work with all LGA 1150x Intel CPUs and all modern AMD CPUs

Stock Cooler Killer?! (Cryorig C7 Review!)

 Fast forward a couple of weeks, and I coincidentally learned while researching AMD CPUs that those washers are supposed to be used IN PLACE of the backplate on some LGA-socket motherboards, and now I can't find them anywhere. Way to include comprehensive instructions, Cryorig!  I could have dealt with the thermal issues on their own, but now that I know the CPU backplate is under undue stress, I have ordered a different low-profile cooler to replace this one. Hopefully the backplate doesn't snap while I'm waiting for the new cooler to arrive.

I bought this cooler for my old Core i7-4790k as I moved it into a small form factor case (Fractal Design Node 202) for living room gaming. I knew it wouldn't be as effective as the AIO water cooler I had before, but size is a bigger concern than performance in the SFF world. Still, I found myself disappointed.

Disappointing thermals and an incomplete instruction manual

  You need to get this with AM4 upgrade kit to work with Ryzen.  My computer runs more quiet than ever before in the middle of summer. Of course the case I recommend matters, which allows full size 120mm blowing on it, and it's a PWM fan so it allows you to control fan speed to be quiet also.  GET THIS COOLER, especially if you have a higher TDP processor, perhaps even if you have a lower one because there is a difference

 I use it in an RVZ03 case with Corsair Mag Lev fans cooling this bad boy. I used Gelid GC Extreme paste with this and very happy with the results.  You need to get this with AM4 upgrade kit to work with Ryzen.  My computer runs more quiet than ever before in the middle of summer

 Of course the case I recommend matters, which allows full size 120mm blowing on it, and it's a PWM fan so it allows you to control fan speed to be quiet also.  GET THIS COOLER, especially if you have a higher TDP processor, perhaps even if you have a lower one because there is a difference.

EXCELLENT for MY RYZEN 2700x Processor - COOL AND QUIET

8 GHz. How does the CPU cooler do? Obviously not that good compared to all those other tower style coolers. In fact it performed very similarly to Cooler Master's UFO style cooler the G100M. The C7CU was doing a slightly better job at cooling though, but was louder at doing so

 They absorb any vibrations that may occur. As for socket compatibility, only the mainstream Intel sockets are supported, which makes total sense and same goes for AMD. Now the installation quite honestly in theory it's all super simple and straightforward, but I had my difficulties getting that backplate on. I wish those screws went through the holes a little easier, since I had to apply quite a bit of force

 At a price of 50 dollars compared to standard tower coolers this may seem a little pricey, but for being an ITX CPU cooler that seems somewhat reasonable. But a 40 dollar price tag sure would make this cooler a bit more appealing. Still without any doubt I can definitely recommend this Cryorc C7CU, only for small form factor PCs that is. I'm giving it my copper award, no I mean silver

 Hey guys, welcome to another review of mine. Today I'm gonna take a look at this super compact all copper CPU cooler, ideal for your mini ITX builds. This is the Cryoric C7CU and yes, feel free to point out how badly I butchered the brand name Cryoric. But hey, everyone pronounces it a little differently

The PERFECT COPPER Cooler for ITX Builds? -- CRYORIG C7 Cu

Alpenfohn Black Ridge vs Cryorig C7 Cu

Reviews by Topic

Performance

Heat Dissipation

Compatibility

QUICK QUESTION!

You might also like