GoCoax MA2500C

Since you are in a rental I would consider using MoCa adapters if the place is already wired for coax. I have had a good experience with the gocoax MoCa 2.5 boxes @ $60 each. https://www.gocoax.com/copy-of-products

I have 3 of these. 1 installed in the office with the cable modem and primary router, 1 in the living room feeding a wireless router as an access point, and one in the far bedroom feeding another wireless router as an access point. All of my coax coming into the house from outside go into one high q...

I have Moca 1.0 (Actiontec ECB 2500c, WCB3000N) mixed with MOCA 2.0 Actiontec ECB6200s and was getting a solid 80-90 Mbits in general and 250-300 Mbits between the MOCA 2.0 adapters. I ordered the goCoax to get MoCA 2.5 and maybe get more speed out of my cable runs in my house. I only ordered one go...

I am new to the MoCA. I have a Netgear Nighthawk router downstairs that covers the entire house. However on my upstairs “office” I tend to drop to about 60% signal on 5ghz band and stay around 90% on 2.4ghz. While my router tests at 350-370 Mbps, I was only getting 60Mbps in the office on 2.4ghz. I ...

OK, so I like the fact that this MoCA adapter is affordable. I got my ActionTec ECB6200s refurbished in a "value pack" for $130! Now they're going for like $40 used because these are only $65. Plus, the GoCoax adapters are more configurable and have a lot more features in their web interfaces. Compa...

I attempted a simple connection from my Starlink Router to a TV set using two of these with a coax cable. It was not initially working. I tried to find a point of contact for the company, but all I could locate was a forum on their website. Their website did not provide any contact info (hence 3 sta...

I have 5 of these and at $300, you would think a simple thing like MOCA would work, but not these devices. Have had them 3 months, and all they do is trash my wifi network as well as the rest of my hard wired devices. Causes ARP storms due to some delay in their hardware. They are about 4-5 firmware...

These devices work perfectly. 2.5Gbs 200MBs copying files across the network. It would be a real chore to rewire the house with network cable. These things work just as good as regular network wires. Currently 3 of them are connected together through a splitter that is installed in the outside cable...

When purchasing the devices, I was under the impression that a few hundreds of feet of coax cable between the units (P2P installation) were no problem. After installing and discussing the issue with the support, I found that there is an upper limit of 60dB attenuation between the 2 units, and that m...

I have a detached garage that I built at the turn of the century. (sounds so weird to say...) When I built it I trenched cabling to it from the house. The run is about 80 feet. Unfortunately, I ran for data lines for 10mbps, because I had a bunch around. I saved at least 50 bucks! Genius. (not) .Why...