Silverstone SG13 vs Velka 7

The front supports both 140 and 120mm fans, I set mine to exhaust and this would be perfect spot to mount a 120 or 140mm all-in-one water cooler for t...

The motherboard adjust tightly to the top of the case because the riser cable. The 4+4 CPU pin cable will make difficult to install the PSU. ITX GPUs are more expensive than normal and by 2022, rx6600xt and rtx3060 are the top units you could hardly find. Exhaust the hot air off the case is the upest challenge and so you should calmly chose the CPU cooler, preferably one who push out the air off the case

If you're looking for an affordable itx case that can fit in a backpack and is easy to build in- just get this one. The sandwhich style itx cases are all $150 minimum and all the other cases don't come in this form factor. I also love the white version - great style. This case is really easy to build in - I've build dozens of systems and this one was actually one of the least cumbersome cases I've worked in

6GHz mark and we're a bit below that here with our low profile cooling more like 4.2 although we can claw back some of that clock speed with a precisi...

I actually had to bend some metal to get the PSU into it (Corsair cx750m). You definitely would have to remove the PSU to make any changes on your mobo. I used a 140mm fan in the front of this build, and the case only had 3 mounts onto which to attach the fan. Can't get a 4th 140mm fan mount??? It's pretty thin and somewhere flimsy metal

The media could not be loaded. I would like to go ahead and state that this K49 Steel, is SUPER sturdy. Like its heavy and beefy. If your getting it for being light well it won't be, however

I know it is an old model but boy does it amazes... For sure you have to look out for dimensions and even with a modular PSU there was no way to fit also the disk cady

I chose this case for its size and clean design. I like the ample air flow vents all around. I like the white color and the options to use or not use the 2 odd looking handles. I like the option to stick on the feet in a location that suits your build

The third case came and as they say, the third time's a charm. The third case came with no quality control issues that I could immediately see. Upon closer inspection, I did notice that the removable top and side panels did not sit completely flush with the rest of the frame, but it was only noticeable if I was looking for it. Now that I had a case I was happy (enough) with I began the build process

2 SSD EVGA SuperNOVA 650W SFX PSU PowerColor RX 5600 XT Red Dragon Pros: - Overall quality is not great, but good for the price - Solid / heavy steel construction - Front USB C connector - Minimalistic design - Small form factor Cons: - NO assembly instructions whatsoever - Paint finish along edges can be better - Lots of additional stand-offs and screws are included, but I couldn't figure out where to use them due to lack of instructions. I ended up not needing most of them. - 2 carrying handles included are tacky and obstruct the minimalistic design of the case. I didn't use mine - Included taller white color feet attach to the case with double-sided adhesive