MSR WhisperLite Stove vs Stansport Outfitter Series 3-Burner

They also give you this little tool here which enables you to quickly change out the valve simply by unscrewing it here and then on the bottom. Here y...

It up here. Here's the piezo that goes in the second one. There you go and you can see this - has you can really kick out the heat out there. This we'...

It says it'll burn 136 minutes on 20 ounces of fuel. So this is a 20 ounce fuel bottle and it is completely full. So theoretically over two hours of o...

Mine came damaged, only three legs touch the counter surface, the other is floating about half an inch, there's an obvious indentation under the stove, the manual says "ALWAYS place stove on a flat, level, solid surface", I did, but the fourth leg still floats half an inch, the two wind flaps consequentially don't latch, by the way that latching system seems very poor. I had high hopes for this little stove, it's a pain to have to return something. Overall, I think a better quality metal would be better, sand the thing well and paint it, part of quality assurance should be to make sure there's nothing that can potentially hurt the customer, like sharp metal edges, like I said, mine came damaged, so I don't even know if it works, or if it's safe to use, another failure point is the packaging, only one layer of bubble wrap inside two boxes, but the inner box is more like thick paper, very poor packaging, very frustrated with this purchase.

I should've done more research on the size and weight of this new Whisperlight because my 442 has it beat. The Whisperlight pack size (with the bottle you need to run it) is bigger and when you add a 20oz full bottle it weighs more. And I don't have to assemble my 442 to use it. So I am open to suggestions and reasons why I should like this new MSR Whisperlight over my 442

This grill is pretty hefty feeling, so hopefully it lasts. Why it got two stars: One of the tabs on the lid that the side wind guard hooks in to is welded so far out of alignment that it cannot work at all. So the lid can only be held up by one side and the other burner is not protected and not able to keep as much heat in. Three out of four of the riveted hinges on the side wind guards are loose and quite wobbly right out of the box