Hiking Boots/Shoes Recommendations?

Hiking boot recommendations?

Any recommendations for women's hiking shoes?

[Request] Hiking/outdoorsy style shoes that can handle lots of walking on concrete

Cold and wet weather hiking boots recommendations?

I am in need of a new pair of trail/hiking boots.

Hiking Boots for heavy use during the summer

Good pair of hiking shoes?

[Request] waterproof hiking shoes

[request] - Good quality walking shoes.

Hello Redditors. I'm in search of a classy yet extremely durable pair of hiking boots to take backpacking around the world for 12+ months with.

Hiking boots recommendations

Men's three season "urban hiker" (like Merrell MOAB but longer lasting)

BIFL Hiking boots for women

Hiking boots with good traction and can stand up to abuse.

Looking for a good pair of shoes for my weird feet

Request - Hiking Sandals

Request: Hiking Boots

Comfortable and cushiony shoes for walking on pavement 10KM/couple hours a day (UK)

Hiking sandals that last?

[Request] Powerful dishwasher with sanitize function?

I want the best god damned dishwasher money can buy.

Looking for the best, easiest to operate, cheapest dishwasher - Recommendation?

[Request] Best countertop dishwasher for reasonable price?

Can anyone recommend a good dishwasher?

Countertop/Portable Dishwasher

[Request] Dishwasher &lt;$1k Australian with QOL features and low water use

Dishwasher for Second Home

My friend bought a house with this KichenAid dishwasher from 1974. He says it works better than any of the other ones he has owned. He just has to convince his wife not to replace it.

What's a good Panel ready dishwasher under $1k?

Best socket set on the market $100-$150

[Request] Socket wrenches

I need a recommendation for a tool set that should last a lifetime. [Request]

Looking for a Mechanics tool set.

23 years later; GM Goodwrench socket set.

A Starter/Lifetime Tool set

Basic screwdriver set needed

Mechanic Tools that are BIFL

Trying to fill a tool roll for my truck and would like input on BFL tools like wrenches, pliers, socket sets, etc.

BIFL: Mastercraft ratchet set with lifetime warranty. Got it at 14, im 31. Went thru more abuse than you think!

Looking to upgrade my home hand tools

Was told to post this here. Husky 270pc toolset from Home Depot for $99, normally $199. Lifetime warranty too

[Request] Ratchet/Wrench/Etc tool set for home/bicycle/general use

Thoughts on a Honda Accord V6 2007?

2010 Honda Accord worth the buy?

Thoughts on a 2008 Honda accord v6 coupe EX-L?

2014 honda accord ??

After an initial round of research it seems like Honda Accord Hybrid is the right answer, but I want to pressure test that with you guys

2014 Accord V6 Touring (any thoughts?)

Which car ?

me again. 2010 2dr honda accord, 122k miles for $5,800. just want a reliable first car, thoughts?

Want to buy an Accord, any suggestions?

2020/2021 Honda Accord LX - Tell Me About Your Likes/Dislikes

Compact - Midsize suv

best small/midsize suv?

Looking for a used (06-14) reliable compact/mid-size SUV

compact/mid size suv

Midsize SUV

Recommendations for midsized SUVs to look at

Compact to Mid-Size SUV

Small to mid-size suv suggestions?

Midsize vehicle for three kids

Mid-Size SUV

Just tried a Lotus Elise Cup 250, driving impressions !

Dan Neil reviews Lotus Emira: As Good As It Gets

Considering a Lotus Elise - USA

How affordable are Lotus Elises from the 2005-2012 model year?

Lotus Exige Sport Final Edition review: farewell, Exige

I wanna know everything you know about a 2005 Lotus Elise

My Lotus Evora Review

Lotus retail sales up 24% in best performance for a decade

2022 Lotus Emira Looks to Be One of the Brand's Best

PURCHASING A LOTUS — Need Tips + Advice.

Looking for a good rpg/action adventure with a good story and good characters

Deep long rpgs?

Looking for a story-focused RPG

Looking for a complex RPG

Fantasy games with an detailed and immersive world?

[WSIB] I am in search for a open world RPG that will keep me busy for hundreds of hours.

Open world game with huge map, lots of things to do, and great graphics

WSIB Feeling a bit of an rpg lull and want something exciting like old school BioWare with a engaging story that doesn’t take 100 hours to play.

WSIB: long, immersive games with high quality storytelling and writing

looking for an open-world rpg

[WSIB] A turn based strategy game that isn’t 4X

Turn-based strategy game

Turn-based strategy games

[WSIB] Small-scale, medieval, strategy game, featuring pikemen and cavalry

(WSIB) Turn-based ”wargaming” game

[WSIB] Turn Based Strategy games

WSIB if I want a strategy game for dummies

WSIB Strategic Rpg

[WSIB] Good offline strategy/(ish) games?

What are some good "smaller scale to control, but still feel large scale battle" tactical / strategy games?

Bullet Hell-Type Games: Atomicrops vs. I, Dracula: Genesis vs. Others?

WSIB if i want a completely story driven indie game but have already played undertale and oneshot (preferably similar to those 2)

Post apocalyptic enthusiast, Underrail or Atom RPG?

[SIB] Undermine or Atomicrops

WSIB if I like "Run into things, need to grow in power/special items to move further so I come back after unlocking said element" type of games.

Blsoodborne or Resident evil 2 ?

What should I buy? Animal Crossing: New Horizons or Doom: Eternal

[WSIB] Fast-paced top-down roguelikes?

[SIB] I Hate Running Backwards or Planetary Dustoff? Or something else?

SIB Nuclear Throne?

What can you recommend for minimizing pores?

I know you can’t get rid of pores but I’m wondering is there anyway to make them smaller? I use La Roche Posay products. They keep my acne mostly at bay but I feel like my pores are just so large. Part of it is genetic, but just wondering if there’s anything else I can do at home to help. Thanks!

OPEN PORES- WHAT TO DO? IS THERE ANY PRODUCT I CAN USE?

What skincare products have you used that helped with large pores?

What is the best thing to use to tighten pores on your face?

Can anyone tell me why my pores are so huge and what I can do to minimize them?

How to reduce pores.

Hey guys, how do I make my pores not look like this? Info in comments (deleted and reposted for an error in the title)

Pores reduction tips?

Advice for shrinking pores on and around nose?

[sun care] sunscreen that doesn’t irritate rosacea and perioral dermatitis

[Sun Care] Looking for sunscreen that doesn't irritate Rosacea

Sunscreen recommendations for rosacea

Looking for a sunscreen for my acne prone skin.

[Sun Care] looking for a sunscreen that works well for people with Eczema.

Desperate for a good sunscreen

Looking for a Daily Suncreen

I’ve tried them all and I still can’t find my holy grail for my dry rosacea skin. Any other recommendations?

Sunscreen, eczema and makeup, Help [Sun care]

[Sun Care] Help with not being able to use Sunscreen

How can i stop a really greasy face?

How to best defeat oily skin?

Is there any long-lasting solution for oily face?

Oily Face -&gt; Wash Face -&gt; More Oily

Extremely oily skin

Y’all know some sort of cream or product I can buy to make my face less greasy looking?

super oily face help needed

Oily Skin— please help!

Really oily skin

How to have less oily skin?

Adrian Krebs

Johannes Engler

Tavis Lochhead

The Cooler Master NR200P is a small form factor chassis that combines space-saving efficiency with cooling capabilities normally found on much larger ATX chassis. 280mm radiator support and 7 possible fan mounting provide a multitude of cooling options whether using water or air. The choice of tempered glass side panel or vented panel alongside the inclusion of a PCI Riser cable make the NR200P one of the most flexible small form factor chassis out there.

amazon.com

Optimum Tech

JayzTwoCents

Gear Seekers

r/buildapc

r/sffpc

r/IndianGaming

r/buildapcsales

r/Amd

 In our case, we're building with Intel, so LGA 1200 socket. So let's take a look at what that process looks like. So we're going to grab the mounting bracket, peel these stickers off real quick, and then we're just going to line that up with the back of our motherboard, making sure that this top bit here lines with those two top screws. Then you want to press down firmly, make sure that adhesive sticks on

 The tempered glass setup is surprisingly okay too, but runs our 2070 Super about 5 degrees warmer. So what happens then when you install an RTX 3090 Founders Edition, 350W in a massive 3 slot form factor, the fastest GPU you can buy today? Well, surprisingly, installation and fitment is pretty straightforward, the NR200P Max is big enough to fit this card no problem, just make sure that the flow through fan isn't jammed up with any cables. But something really cool here is that even with a 3 slot card, there is a bit of a gap here between the card and the side panel, which means that even when you're running the tempered glass panel, performance is okay. The RTX 3090 was sitting at 70 degrees C, boosting to 1890MHz, and running at a pretty typical fan speed of about 54%

 With graphics cards just getting bigger, hotter, louder, it's important that ITX cases can not only fit those powerful cards, but cool them effectively as well. Now we're only testing with a 2070 Super here, nothing crazy, but the performance here is really impressive. The performance actually beats the Phanteks P500A mid tower by a couple of degrees, while also being a little bit quieter. Again, the setup here has the vertical GPU pulling air in through the side panels, and that heat is exhausted both at the top and bottom, and incredibly effective

 With the vented panel setup though, we can run things a little bit quieter and cooler, shaving off 4 degrees C from our GPU temp, about 10% off of the fan speed, along with a slightly higher boost clock. So no doubt, vented is the way to go for performance, but tempered glass is viable even with a giant graphics card, and I will admit it does look pretty good. So performance wise, the NR200P Max really can't be faulted, and I think moving forward, with graphics cards just getting bigger and louder and hotter, I think this is probably like a top 3 ITX case moving forward. It is a bit on the bigger side, but the reason I say that is because if you are considering these massive GPUs, these ITX cases, they are getting harder and harder to fit them, but not only fit them, but cool them effectively as well

The New NR200P MAX Can Handle Anything

 I have 5 case fans running in my build. To me this is the perfect size. it's larger than the typical ITX case but smaller than a typical mATX case; basically right in the middle. seems to be standard for an ITX motherboard to have 2 NVME slots so the need for an SSD is more for if you want just extra storage

The quality of the case is top notch; airflow in this case is awesome; looks like something Apple would make. This is my first ground up computer build and this case has made it very simple. I have 5 case fans running in my build. To me this is the perfect size

Excellent case; highly recommended

Cooler master nr200p because you can easily build smaller systems due to nvme, no optical drives, and no large hard drives anymore. Oh yeah and also it has actual good airflow unlike my shitty previous evolv matx case.

As someone who is now building a fully new PC after 6 1/2 years (and purchased a Phanteks Enthoo Evolv case 2 years after building), what made you choose your current PC case?  
Personally, I am looking at an Lian Li Lancool 2 Performance model for my next build, however, I’ve only exclusively looked for airflow. What made you choose your case for a new build?

<div class="md"><p>As someone who is now building a fully new PC after 6 1/2 years (and purchased a Phanteks Enthoo Evolv case 2 years after building because aesthetics), what made you choose your current PC case?<br/>
Personally, I am looking at a Lian Li Lancool 2 Performance model now for my next build, however, I’ve only exclusively looked for airflow. So hey, what made you choose your case?</p>
</div>

Why did you choose your PC case?

 So they've addressed that in this one here. Something else that makes this one kind of interesting. It's the first case we've ever taken a look at that gives you both tempered glass and mesh panel side panels. So there's the tempered glass one sitting there in the box

 Phil, could you fit this in your shift? Nope. Not even close. Can you fit this radiator? Yeah, it's more than twice. You have a 120

 So I'm feeling like an inconsistent parent at the moment. The NR200P Max from Cooler Master. This was a logical upgrade to the non-Max edition, which had, in my opinion, not the best internal layout. This one just checks all the boxes in terms of small form factor build

 Do you want it to be pretty, or do you want extra airflow with a ventilated side panel? This is a SFF small form factor case, which means we're talking about ITX motherboard. We're talking about limited space for certain GPUs and stuff, but small form factor cases have definitely been making a big impression on people in the world lately. And a lot of people are enjoying it. It's not the smallest small form factor case that you're going to find, but it's definitely sleek

This is the absolute BEST small PC case we have tested yet...

Nano S - great case, but it takes a lot of space on the table, in addition, in the previous build with ATX PSU there was a problem with video card cooling - maybe using sfx PSU will solve the problem?. Node 202 - impossible to use high coolers, also, in my opinion, quite noisy. NR200p - didn't like it very much, quite noisy and difficult to cool with sfx-l power supply. Lian Li Tu 150 - I like the look, nice, compact enough for me, but nowhere can I find information about how quiet it is?

# New to SFFPCs? [Beginners Guide, FAQ and Starter Cases](https://wiki.sff.media/General/BeginnerFAQ)

If you're new to SFFPCs or PC building in general, take a look at this article written by u/ermac-318 for some answers to your questions, as well as recommendations for some easy cases to start with.

# [SFF Cases and Parts List](https://docs.google.com/spreadsheets/d/1AddRvGWJ_f4B6UC7_IftDiVudVc8CJ8sxLUqlxVsCz4/edit?usp=sharing)

If you're looking for a case or parts to go in your SFFPC, the above spreadsheet maintained by u/prayogahs and u/ermac-318 has data on cases, motherboards, GPUs, CPU coolers, RAM and PSUs.

# Set filters to find parts for yourself

In the toolbar of the sheet, go to `Data -&gt; Filter views` for some quick filters, or select `Create new temporary filter view` to create a custom one. You can also copy the sheet out into a spreadsheet of your own and make your own notes.

# Ask for help here

Once you have an idea of the case or parts you are considering, make a comment in this thread detailing your requirements and what cases or parts you are eyeing so far, and discuss what you like or do not like about them.

# [Join our Discord Server](https://discord.gg/sffpc)

<div class="md"><h1>New to SFFPCs? <a href="https://wiki.sff.media/General/BeginnerFAQ">Beginners Guide, FAQ and Starter Cases</a></h1>

<p>If you&#39;re new to SFFPCs or PC building in general, take a look at this article written by <a href="/u/ermac-318">u/ermac-318</a> for some answers to your questions, as well as recommendations for some easy cases to start with.</p>

<h1><a href="https://docs.google.com/spreadsheets/d/1AddRvGWJ_f4B6UC7_IftDiVudVc8CJ8sxLUqlxVsCz4/edit?usp=sharing">SFF Cases and Parts List</a></h1>

<p>If you&#39;re looking for a case or parts to go in your SFFPC, the above spreadsheet maintained by <a href="/u/prayogahs">u/prayogahs</a> and <a href="/u/ermac-318">u/ermac-318</a> has data on cases, motherboards, GPUs, CPU coolers, RAM and PSUs.</p>

<h1>Set filters to find parts for yourself</h1>

<p>In the toolbar of the sheet, go to <code>Data -&gt; Filter views</code> for some quick filters, or select <code>Create new temporary filter view</code> to create a custom one. You can also copy the sheet out into a spreadsheet of your own and make your own notes.</p>

<h1>Ask for help here</h1>

<p>Once you have an idea of the case or parts you are considering, make a comment in this thread detailing your requirements and what cases or parts you are eyeing so far, and discuss what you like or do not like about them.</p>

<h1><a href="https://discord.gg/sffpc">Join our Discord Server</a></h1>
</div>

Weekly Case &amp; Parts Recommendation Thread (Start here if you are new! Help here if you can!)

 Top end air coolers, like the Noctua NH-U12A and 280mm AIOs, fit in here. Fat triple slot GPUs are supported (I'm only aware of 2 3090s that don't fit of the dozens of variations available). It supports six 120mm fans total. The ventilation allows the case to properly breathe and filters are provided

  The top fans use a tool less mounting system, which is great and they provide the hardware for mounting two fans, the problem is it's only compatible with standard 25mm thick fans. If you want to use slim fans you have to do some custom work to get them to mount.  The steel feels a bit too flimsy. I'd pay more for a more premium version with thicker/sturdier steel, maybe some aluminum, and better quality paint

  The steel feels a bit too flimsy. I'd pay more for a more premium version with thicker/sturdier steel, maybe some aluminum, and better quality paint. It's currently on par with the cooler master master box series, which isn't bad, but it's not great. Fractal Design's Define and Meshify series, for example, feel of higher quality material and paint than this even though they're also mass produced, steel and plastic only construction, and are affordable

The most compact SFF case that can properly fit modern hardware

 We've got our hands on the Cooler Master NR200P and we're going to do a build with it today. But before we do that, we're going to just tear it down a little bit, have a little bit of a look at how everything fits, and then we're going to do a build. So I think it's time to roll that intro. Let's do it

 And I just want to reiterate this video is not sponsored. Nothing like that. They sent us the case like they do with all of these cases and nailed it, nailed it, nailed it, nailed it. I like it

 They sent us the case like they do with all of these cases and nailed it, nailed it, nailed it, nailed it. I like it. I don't have much more to say. They did a good thing

 So we could do that pretty easily. I want to do an air cool build with like max out the fans and use an air cooler. And then I think I want to build a personal rig. So I want to replace one of the rigs we already have

Cooler Master NR200P is Absolutely BRILLIANT!

 I think the community has been waiting for something affordable like this for a long time.  For me, aesthetics was something I really wanted to do, so I went with a Lian Li TU150 instead.

 Any of the Noctua ones that do fit haven't been released in black chromax yet and I don't want to go with their ugly brown. There are some decent air coolers that will fit, but I wasn't really excited about any of them. 4. The fact that your only option with the glass is the vertical mount the GPU kind of defeats the purpose as the graphics card will block off the rest of your build

 Here's why: 1. When using the glass, you choke out your radiator if you mount it to the side bracket (obviously). So you have to bottom mount it and then vertical mount your GPU. The GPU does get better thermals than some other vertical mount cases, but it has still shown to hinder performance

 Then I thought that I would just do an air cooler. However, most of high performance CPU air coolers don't fit in this case. Any of the Noctua ones that do fit haven't been released in black chromax yet and I don't want to go with their ugly brown. There are some decent air coolers that will fit, but I wasn't really excited about any of them

Amazing case if you don't use the Tempered Glass

 After several rebuilds I feel like an idiot cause I didn’t think of it. Make sure you check the way your cables are sleeved and check your motherboard manual and make sure the connections line up properly or you’ll probably spend a whole bunch of time trying to fix a computer blindly.  Outside of that tedious issue, the case has been great so far I was able to fit a scythe fuma 2 inside however the hardrive tray/radiator bracket couldn’t be reinstalled. Thermals have been great mid 60s on an overclocked Ryzen 7 3700

  Outside of that tedious issue, the case has been great so far I was able to fit a scythe fuma 2 inside however the hardrive tray/radiator bracket couldn’t be reinstalled. Thermals have been great mid 60s on an overclocked Ryzen 7 3700. Also with the fuma I was able to fit 2 full size 120mm fans at the top (artic p12s) and with a 2 slot gpu (5700xt) I was also able to fit 2 full size 120mm fans (also artic p12s)  This was my first time building inside any itx case, outside of me not checking the front panel connectors it was really straight forward. Cable management is a little tough personally I would recommend custom cables that way it’s not as bulky as the stock cables you get in any power supply

 Also with the fuma I was able to fit 2 full size 120mm fans at the top (artic p12s) and with a 2 slot gpu (5700xt) I was also able to fit 2 full size 120mm fans (also artic p12s)  This was my first time building inside any itx case, outside of me not checking the front panel connectors it was really straight forward. Cable management is a little tough personally I would recommend custom cables that way it’s not as bulky as the stock cables you get in any power supply. I would also hugely recommend a modular power supply (like I have in the picture) so you only have the cables you need and it’s not a complete rats nest. Also zip ties or twist ties are your best friends, I see a lot of people build their computer and leave their cables all over the place don’t be that person

Updated review: The front panel connectors come Presleeved allowing you to plug all 8 pins in at once instead of individually. This is great but I failed to check to see if the way they had their cable sleeved would line up with the pins on my motherboard. After several rebuilds I feel like an idiot cause I didn’t think of it. Make sure you check the way your cables are sleeved and check your motherboard manual and make sure the connections line up properly or you’ll probably spend a whole bunch of time trying to fix a computer blindly

Tedious front panel connector, regardless a great case

pcmag.com

Mash IT

 It supports full ATX power supplies, but I wanted to use the SF750 to save on weight and space. Really easy to build with it, as there's plenty of room behind it to route and bundle cables to get them out of sight.

Team Red Build in Jonsbo T8 PLUS

 But other than that it's a very nice looking case. So that's the end of this video. Please subscribe and hit the notifications bell if you want to see further upcoming videos of other ITX cases that we will be getting in.

 2. Right, so that's the motherboard built. So that's the motherboard built up, and we've got the side panels off the case. I've switched the fan out from the Johnsbo fan because I don't like RGB, so I've just put in a basic noctua, 14cm, and there's the cable

 Okay so we're almost 3 minutes in now and the temps look completely under control so I don't think I'm going to waste 10 minutes when it's not creeping up any more than 75. I think it seems to be creeping up to about 75 and then the fan will spin up a bit higher so with the stock fan profile. This is easily maintaining the temperatures so I'm going to call that one a day and I'm going to now run a 3D mark. Okay so we're now running Time Spy, 3D mark Time Spy, it's already gone through the demo section and we're now in the graphics so we're probably about 5 minutes into this benchmark

 Having the 140mm fan at the top is really impressive, it's given me nice quiet idle temperatures and even under load the machine is pretty good, as I say I would normally be under-bolting everything, keeping stock clocks and getting a system quiet, well it could easily do that on this system and have an almost silent system on load. So all in all I'm very impressed with the system, it's not a lot bigger than the S3 and the K39 but you're getting a lot more value for money with this case, it's a lot cheaper than those other systems. You can use an SFX power supply or even an ATX power supply if you're crazy which gives you a lot more options again for higher quality PSUs with better output without having to spend £150 on the Enhance 7660B which is about the only decent flex ATX PSU. So would I recommend this case? I think if you're looking for quite a small case you can transport around, you're not looking for the absolute tiniest case such as the K39 or the S3 then I think this is a very very good option

T8 Build, Thermals and Thoughts

2. PSU- EVGA 650BQ (insanely overkill for this, but it was the only one I had around that was good haha). Case- It's the beautifull Jonsbo T8, It's just 50€ in my country (Portugal).

Starting 2022 with this beautifull portable setup!

Cooler Master MasterBox NR200P vs Jonsbo T8 Plus

Reviews by Topic

Cooling

Materials

QUICK QUESTION!

You might also like