Cooler Master MasterBox NR200P vs Fractal Node 304

The tempered glass setup is surprisingly okay too, but runs our 2070 Super about 5 degrees warmer. So what happens then when you install an RTX 3090 F...

Or a traditional layout that can sit horizontally like the Node 304, which would actually be better for cooling as the GPU side would no longer be at the bottom that would obstruct airflow. Obviously such a config would take up more surface area on a desk, but I'd definitely take a cool and quiet cookie box over a literal toaster oven any day. One can still choose to sit the case upright if one wishes, of course, but these are such simple options to implement.

I have 5 case fans running in my build. To me this is the perfect size. it's larger than the typical ITX case but smaller than a typical mATX case; basically right in the middle. seems to be standard for an ITX motherboard to have 2 NVME slots so the need for an SSD is more for if you want just extra storage

Your PSU MUST measure under 160mm in length. I bought a PSU that measures 170mm and the GeForce GTX 780 will not fit at all. Moreover, the cables to plug into the motherboard and other parts come out the side of the PSU that faces the video card, so even 160mm probably wouldn't be short enough, as that is the bare minimum for the card to fit. To me, this is false advertising

Cooler master nr200p because you can easily build smaller systems due to nvme, no optical drives, and no large hard drives anymore. Oh yeah and also it has actual good airflow unlike my shitty previous evolv matx case.

I wanted to have a fairly powerful computer in a tight package with out worrying about heat. I really enjoy the layout and physical appearance of this case. the color scheme and the minimalist design spoke to me. the lack of an optical drive is due to the location of the HDD/SDD bays and the PSU

Do you want it to be pretty, or do you want extra airflow with a ventilated side panel? This is a SFF small form factor case, which means we're talkin...

Here we have the three-step fan controller, two expansion slots, the I.O. shield spot and the power supply connection. The internal cables are all bla...

The top fans use a tool less mounting system, which is great and they provide the hardware for mounting two fans, the problem is it's only compatible with standard 25mm thick fans. If you want to use slim fans you have to do some custom work to get them to mount. The steel feels a bit too flimsy. I'd pay more for a more premium version with thicker/sturdier steel, maybe some aluminum, and better quality paint

The front bezel is solid which snaps off and you can clean the fan filters. The front bezel appears to be brushed aluminum but it's actually plastic. It's tough to tell the difference until you touch the material. No one will know it's plastic but you

We've got our hands on the Cooler Master NR200P and we're going to do a build with it today. But before we do that, we're going to just tear it down a...

it is built and not a home run but I doubt I will be taking it apart since I will probably add a remote power switch to replace the bad one. All in all it beats having a bad design that requires a bunch of fans to keep cool. I only use the CPU cooler so it runs dead silent with a top end cpu and still very cool. That is worth a lot to me

I think the community has been waiting for something affordable like this for a long time. For me, aesthetics was something I really wanted to do, so I went with a Lian Li TU150 instead.

Is it metal? Yeah, it's metal. Power button is on the side, two USB 3.0 ports, headphone and microphone ports, intake vent on this side which, ah, yes...