Creality CR-30

But i do really hope that it happens quickly and, for example, i'd love like prusa to step in with a prusa slicer integration in future, because that ...

The best machine possible naomi also send a machine to filament frenzy to specifically create tuned filament profiles that will be included with the m...

I can only speak for the cr-30 directly but to put it plain and simple, my experience is this:. If you want a reliable workhorse printer that will crank out awesome prints right out of the box, do not get this printer.

I expected this to work properly right out of the box and it did not. Way too much fine tuning and tweaking required to get it to run properly. Fortunately I found a discord that focuses on troubleshooting this printer. Word of advice: if you purchase one, switch the nozzle to a .8mm immediately. Us...

I have multiple belt based printers and by far this was the simplest setup out of all of them. Assembly takes less than 1 hour as most of the machine is pre-built. If you got one of the creality wifi boxes for it do your self a favor and throw it away. It was easy for us to setup the printer at my l...

This printer fills a unique niche. If you have a reliable print and need a lot of them or have something that is less than 8 inches wide, but several feet long, this is your printer. It does things that a regular printer doesn't, like 90 degree overhangs, but fails on things you'd think were simple,...

It's built like an absolute tank, but I think creality changed the belt material again since the reviewer samples. There is virtually zero adhesion to that belt. I've had 4 spaghetti messes in the week and a half of having this, and in that mess it's almost caught the house on fire, it's bent and cr...

If you are new to 3D printing stay away from this printer if you don't print long parts then purchase a different printer, I have been printing for over five years, own 6 printers i have never ever had so much problem leveling a bed. I spend two days to level finally got it leveled and did some test...

Things seem to work appropriately. This should not be your first 3d printer. I have been toying with settings and leveling since I got it and have not found anything i've like yet. (Most prints spaghetti entirely). The most difficult printer you can buy. It is no new, there aren't a lot of guides ou...

The media could not be loaded. I was sent a used printer even though I paid for a new one. Some pieces were already installed and some screws weren’t even in the baggies, part of the frame was bent and blue pla was extruded even though I had put white pla in