Silverstone SG13 vs Velka 5 V2

The front supports both 140 and 120mm fans, I set mine to exhaust and this would be perfect spot to mount a 120 or 140mm all-in-one water cooler for t...

You will have to apply more force than you're comfortable with to manage excess PSU cables. The temperature on CPU and GPU are almost the same as my previous NR200 setup which had 3 case fans. CPU - low 40C idle, max 70C GPU - 38C idle, max 68C Overall, I'm very satisfied with the finished build. If you're looking for a sub 10-liter SFF case, I highly recommend this one

If you're looking for an affordable itx case that can fit in a backpack and is easy to build in- just get this one. The sandwhich style itx cases are all $150 minimum and all the other cases don't come in this form factor. I also love the white version - great style. This case is really easy to build in - I've build dozens of systems and this one was actually one of the least cumbersome cases I've worked in

I use this PC for my work on the go and I travel with a SteelSeries Apex controller and my Samsung Tab S7 plus. With the help of Super Display I can use my tablet as both an android device and a x86 laptop with a single USB-C cable. This allows for 120hz OLED gaming at high resolutions. So far the machine is whisper quiet with my undervolted settings with CPU temps of 75 degrees and GPU temps of 72 degrees

I actually had to bend some metal to get the PSU into it (Corsair cx750m). You definitely would have to remove the PSU to make any changes on your mobo. I used a 140mm fan in the front of this build, and the case only had 3 mounts onto which to attach the fan. Can't get a 4th 140mm fan mount??? It's pretty thin and somewhere flimsy metal

Also, the packaging for the sides of the case is not sufficient, as the box is incredibly thin and there is only a plastic wrap covering the sides. My case isn't so bad that I would return it since it will be put into a backpack where I'm sure it will be scuffed anyway, but I might be disappointed if I were intending to leave this on my desk all the time.

I know it is an old model but boy does it amazes... For sure you have to look out for dimensions and even with a modular PSU there was no way to fit also the disk cady

If you are looking to build a gaming PC as small as possible under 10 liters, both of these cases are great options, really could swing either way. If...

I tried to get away with using a front-mounted 140mm fan and the stock Intel cooler, but it ran a bit warm (high 70's in Cinebench r15 testing). Adding the Corsair AIO dropped the temps by >20 degrees C. The layout of the case is nice, and the size was perfect for my needs, but I wish it had higher quality materials and an easily removable dust filter. The front has a cheap-looking plastic edge, but overall it's nicely designed

I chose this case for its size and clean design. I like the ample air flow vents all around. I like the white color and the options to use or not use the 2 odd looking handles. I like the option to stick on the feet in a location that suits your build