SGPC K39 vs Silverstone SG13

You could buy it today if you wanted, and it's relatively affordable as well. I mean, around 75 to 80 US dollars once you factor in the riser cable. S...

If you're looking for an affordable itx case that can fit in a backpack and is easy to build in- just get this one. The sandwhich style itx cases are all $150 minimum and all the other cases don't come in this form factor. I also love the white version - great style. This case is really easy to build in - I've build dozens of systems and this one was actually one of the least cumbersome cases I've worked in

Hi everyone it's El here, today I've got a build in the K39v2 featuring the Ryzen 5 5600 X and the PowerCollab 5600 XT ITX. So I hope you all enjoy it...

The front supports both 140 and 120mm fans, I set mine to exhaust and this would be perfect spot to mount a 120 or 140mm all-in-one water cooler for t...

This case is really unique due to its size, but I think the quality control needs some work. Mine came with a very low quality loose screwdriver at the top of the box which has the possibility to mar the finish on the case. I would have preferred to not get a screwdriver at all. A couple panels had some scratches and areas where the finish had been taken off, but these areas are covered by packaging so I don't understand how they have these marks at all, unless it came from the factory this way

The third case came and as they say, the third time's a charm. The third case came with no quality control issues that I could immediately see. Upon closer inspection, I did notice that the removable top and side panels did not sit completely flush with the rest of the frame, but it was only noticeable if I was looking for it. Now that I had a case I was happy (enough) with I began the build process

I chose this case for its size and clean design. I like the ample air flow vents all around. I like the white color and the options to use or not use the 2 odd looking handles. I like the option to stick on the feet in a location that suits your build

I know it is an old model but boy does it amazes... For sure you have to look out for dimensions and even with a modular PSU there was no way to fit also the disk cady

The media could not be loaded. I would like to go ahead and state that this K49 Steel, is SUPER sturdy. Like its heavy and beefy. If your getting it for being light well it won't be, however

I actually had to bend some metal to get the PSU into it (Corsair cx750m). You definitely would have to remove the PSU to make any changes on your mobo. I used a 140mm fan in the front of this build, and the case only had 3 mounts onto which to attach the fan. Can't get a 4th 140mm fan mount??? It's pretty thin and somewhere flimsy metal

These are smaller than your SFX or SFX-L power supplies that you normally see in many other ITX case builds. For this build, I ended up using the 300 ...

It was a fairly fun build to do, it is a very tight fit so plan your graphics card and cooler accordingly. As far as quality the case is very sturdy and had no problems. Noise is a very real thing with this build so i recommend buying some quiet fans and playing with power curves. After you do some testing you can get it pretty quiet with low loads