Hiking Boots/Shoes Recommendations?

Hiking boot recommendations?

Any recommendations for women's hiking shoes?

[Request] Hiking/outdoorsy style shoes that can handle lots of walking on concrete

Cold and wet weather hiking boots recommendations?

I am in need of a new pair of trail/hiking boots.

Hiking Boots for heavy use during the summer

Good pair of hiking shoes?

[Request] waterproof hiking shoes

[request] - Good quality walking shoes.

Hello Redditors. I'm in search of a classy yet extremely durable pair of hiking boots to take backpacking around the world for 12+ months with.

Hiking boots recommendations

Men's three season "urban hiker" (like Merrell MOAB but longer lasting)

BIFL Hiking boots for women

Hiking boots with good traction and can stand up to abuse.

Looking for a good pair of shoes for my weird feet

Request - Hiking Sandals

Request: Hiking Boots

Comfortable and cushiony shoes for walking on pavement 10KM/couple hours a day (UK)

Hiking sandals that last?

[Request] Powerful dishwasher with sanitize function?

I want the best god damned dishwasher money can buy.

Looking for the best, easiest to operate, cheapest dishwasher - Recommendation?

[Request] Best countertop dishwasher for reasonable price?

Can anyone recommend a good dishwasher?

Countertop/Portable Dishwasher

[Request] Dishwasher &lt;$1k Australian with QOL features and low water use

Dishwasher for Second Home

My friend bought a house with this KichenAid dishwasher from 1974. He says it works better than any of the other ones he has owned. He just has to convince his wife not to replace it.

What's a good Panel ready dishwasher under $1k?

Best socket set on the market $100-$150

[Request] Socket wrenches

I need a recommendation for a tool set that should last a lifetime. [Request]

Looking for a Mechanics tool set.

23 years later; GM Goodwrench socket set.

A Starter/Lifetime Tool set

Basic screwdriver set needed

Mechanic Tools that are BIFL

Trying to fill a tool roll for my truck and would like input on BFL tools like wrenches, pliers, socket sets, etc.

BIFL: Mastercraft ratchet set with lifetime warranty. Got it at 14, im 31. Went thru more abuse than you think!

Looking to upgrade my home hand tools

Was told to post this here. Husky 270pc toolset from Home Depot for $99, normally $199. Lifetime warranty too

[Request] Ratchet/Wrench/Etc tool set for home/bicycle/general use

Thoughts on a Honda Accord V6 2007?

2010 Honda Accord worth the buy?

Thoughts on a 2008 Honda accord v6 coupe EX-L?

2014 honda accord ??

After an initial round of research it seems like Honda Accord Hybrid is the right answer, but I want to pressure test that with you guys

2014 Accord V6 Touring (any thoughts?)

Which car ?

me again. 2010 2dr honda accord, 122k miles for $5,800. just want a reliable first car, thoughts?

Want to buy an Accord, any suggestions?

2020/2021 Honda Accord LX - Tell Me About Your Likes/Dislikes

Compact - Midsize suv

best small/midsize suv?

Looking for a used (06-14) reliable compact/mid-size SUV

compact/mid size suv

Midsize SUV

Recommendations for midsized SUVs to look at

Compact to Mid-Size SUV

Small to mid-size suv suggestions?

Midsize vehicle for three kids

Mid-Size SUV

Just tried a Lotus Elise Cup 250, driving impressions !

Dan Neil reviews Lotus Emira: As Good As It Gets

Considering a Lotus Elise - USA

How affordable are Lotus Elises from the 2005-2012 model year?

Lotus Exige Sport Final Edition review: farewell, Exige

I wanna know everything you know about a 2005 Lotus Elise

My Lotus Evora Review

Lotus retail sales up 24% in best performance for a decade

2022 Lotus Emira Looks to Be One of the Brand's Best

PURCHASING A LOTUS — Need Tips + Advice.

Looking for a good rpg/action adventure with a good story and good characters

Deep long rpgs?

Looking for a story-focused RPG

Looking for a complex RPG

Fantasy games with an detailed and immersive world?

[WSIB] I am in search for a open world RPG that will keep me busy for hundreds of hours.

Open world game with huge map, lots of things to do, and great graphics

WSIB Feeling a bit of an rpg lull and want something exciting like old school BioWare with a engaging story that doesn’t take 100 hours to play.

WSIB: long, immersive games with high quality storytelling and writing

looking for an open-world rpg

[WSIB] A turn based strategy game that isn’t 4X

Turn-based strategy game

Turn-based strategy games

[WSIB] Small-scale, medieval, strategy game, featuring pikemen and cavalry

(WSIB) Turn-based ”wargaming” game

[WSIB] Turn Based Strategy games

WSIB if I want a strategy game for dummies

WSIB Strategic Rpg

[WSIB] Good offline strategy/(ish) games?

What are some good "smaller scale to control, but still feel large scale battle" tactical / strategy games?

Bullet Hell-Type Games: Atomicrops vs. I, Dracula: Genesis vs. Others?

WSIB if i want a completely story driven indie game but have already played undertale and oneshot (preferably similar to those 2)

Post apocalyptic enthusiast, Underrail or Atom RPG?

[SIB] Undermine or Atomicrops

WSIB if I like "Run into things, need to grow in power/special items to move further so I come back after unlocking said element" type of games.

Blsoodborne or Resident evil 2 ?

What should I buy? Animal Crossing: New Horizons or Doom: Eternal

[WSIB] Fast-paced top-down roguelikes?

[SIB] I Hate Running Backwards or Planetary Dustoff? Or something else?

SIB Nuclear Throne?

What can you recommend for minimizing pores?

I know you can’t get rid of pores but I’m wondering is there anyway to make them smaller? I use La Roche Posay products. They keep my acne mostly at bay but I feel like my pores are just so large. Part of it is genetic, but just wondering if there’s anything else I can do at home to help. Thanks!

OPEN PORES- WHAT TO DO? IS THERE ANY PRODUCT I CAN USE?

What skincare products have you used that helped with large pores?

What is the best thing to use to tighten pores on your face?

Can anyone tell me why my pores are so huge and what I can do to minimize them?

How to reduce pores.

Hey guys, how do I make my pores not look like this? Info in comments (deleted and reposted for an error in the title)

Pores reduction tips?

Advice for shrinking pores on and around nose?

[sun care] sunscreen that doesn’t irritate rosacea and perioral dermatitis

[Sun Care] Looking for sunscreen that doesn't irritate Rosacea

Sunscreen recommendations for rosacea

Looking for a sunscreen for my acne prone skin.

[Sun Care] looking for a sunscreen that works well for people with Eczema.

Desperate for a good sunscreen

Looking for a Daily Suncreen

I’ve tried them all and I still can’t find my holy grail for my dry rosacea skin. Any other recommendations?

Sunscreen, eczema and makeup, Help [Sun care]

[Sun Care] Help with not being able to use Sunscreen

How can i stop a really greasy face?

How to best defeat oily skin?

Is there any long-lasting solution for oily face?

Oily Face -&gt; Wash Face -&gt; More Oily

Extremely oily skin

Y’all know some sort of cream or product I can buy to make my face less greasy looking?

super oily face help needed

Oily Skin— please help!

Really oily skin

How to have less oily skin?

Adrian Krebs

Johannes Engler

Tavis Lochhead

Wirecutter

The Pro-Ject Debut Carbon Evo is easy to set up, has fantastic build quality, and is the best-sounding turntable we’ve tested.

TechGearLab

The Pro-Ject Debut Carbon has a simple look with clean lines that will look attractive on any shelf or table in your home. The care that went into the aesthetics of this device carries over into the sound quality, treating us to the fullest and most well-balanced sound of all the models in our test fleet. The mid and treble ranges have impeccable clarity, with refined sound and evident nuances. And in addition to all of that, it is very well constructed compared to other turntables at this price point.
If you aren't willing to shell out some serious cash for your listening experience, we'd suggest looking elsewhere. The Pro-Ject Debut Carbon is priced higher than the other models we tested, and is the only model that requires the addition of a separate preamplifier. Those new to vinyl might not be ready to make such a large investment in a turntable. However, if you don't mind spending a little more for top-quality sound, we highly recommend the Pro-Ject Debut Carbon. We'd also point out that this model has options for upgrades if you anticipate becoming more invested in vinyl collecting. 
Read more: Pro-Ject Debut Carbon review

Best for Most

musicdirect.com

amazon.com

cnet.com

Turntable Lab

Gramophone

Audio Advice

Level1Techs

The Audiophile Man

r/BudgetAudiophile

r/audiophile

r/headphones

r/sonos

The turnatable is a Pro-Ject Debut Carbon and the Phono is a Graham Slee Communicator Gram Amp 2. First off let me say that Im not very knowledgeable about sound equipment and buy most my stuff on reviews and affordability. WhatHifi guided my decision making for the new speakers and amp. I think I have a pretty good ear for detail though

After buying a new house and wanting an amp that had Bluetooth streaming capabilities, I decided to finally upgrade my modest setup. Went from Audio Engine A5 to these ELAC Debut References with LS 30 Speaker stands, added the Cambridge Audio CXA81, and upgraded my cartridge from the Ortofon 2m red to black. The turnatable is a Pro-Ject Debut Carbon and the Phono is a Graham Slee Communicator Gram Amp 2. 

First off let me say that Im not very knowledgeable about sound equipment and buy most my stuff on reviews and affordability. WhatHifi guided my decision making for the new speakers and amp. I think I have a pretty good ear for detail though.

3-4 years ago when I had my first setup, I was impressed how good music could sound over regular Bluetooth speakers. But this new amp and speaker combo is incredible! I'm hearing things I couldn't before and even my wife who couldnt care less about equipment was blown away. The first song I streamed (Frank Ocean - White Ferrari), I had no idea Bluetooth could sound so rich and deep. I cannot recommend the Cambridge Audio CXA81 enough, the build quality is like nothing I've had the pleasure of touching. The 2m black was installed a day or two after and I have to be completely honest, I haven't noticed such a significant difference that I can say it's worth the $500 (open box special price)

I should add another disclaimer: I haven't listened to my system above a volume that would require you to raise your voice, so I suppose I can't truly judge the 2m black.

At this point, I don't know why I would upgrade any further. I'm pretty sastified with everything and the sound is amazing. If anyone has feedback on the 2M black, please share. Everything Ive read said it's supposed to be levels above the red in detail.

<div class="md"><p>After buying a new house and wanting an amp that had Bluetooth streaming capabilities, I decided to finally upgrade my modest setup. Went from Audio Engine A5 to these ELAC Debut References with LS 30 Speaker stands, added the Cambridge Audio CXA81, and upgraded my cartridge from the Ortofon 2m red to black. The turnatable is a Pro-Ject Debut Carbon and the Phono is a Graham Slee Communicator Gram Amp 2. </p>

<p>First off let me say that Im not very knowledgeable about sound equipment and buy most my stuff on reviews and affordability. WhatHifi guided my decision making for the new speakers and amp. I think I have a pretty good ear for detail though.</p>

<p>3-4 years ago when I had my first setup, I was impressed how good music could sound over regular Bluetooth speakers. But this new amp and speaker combo is incredible! I&#39;m hearing things I couldn&#39;t before and even my wife who couldnt care less about equipment was blown away. The first song I streamed (Frank Ocean - White Ferrari), I had no idea Bluetooth could sound so rich and deep. I cannot recommend the Cambridge Audio CXA81 enough, the build quality is like nothing I&#39;ve had the pleasure of touching. The 2m black was installed a day or two after and I have to be completely honest, I haven&#39;t noticed such a significant difference that I can say it&#39;s worth the $500 (open box special price)</p>

<p>I should add another disclaimer: I haven&#39;t listened to my system above a volume that would require you to raise your voice, so I suppose I can&#39;t truly judge the 2m black.</p>

<p>At this point, I don&#39;t know why I would upgrade any further. I&#39;m pretty sastified with everything and the sound is amazing. If anyone has feedback on the 2M black, please share. Everything Ive read said it&#39;s supposed to be levels above the red in detail.</p>
</div>

Great looking setup! The stands look similar to the ones we use from Kanto with a smaller base.  I've reviewed both the ELACs and the Cambridge piece on my YT channel but haven't heard the Audio Engine' speakers yet.

<div class="md"><p>Great looking setup! The stands look similar to the ones we use from Kanto with a smaller base.  I&#39;ve reviewed both the ELACs and the Cambridge piece on my YT channel but haven&#39;t heard the Audio Engine&#39; speakers yet.</p>
</div>

New house, new components.

 It gets really complex with many overdubbed tracks of guitar sax drums and vocals less expensive turntables tend to fall apart on this cut, as they just can't pull all the information out. While i've obviously heard this sound better on some much more expensive turntables, this combo did just incredibly well for the price i have to say. After about an hour of listening to the new evo with the rainier, i felt this is one heck of an easy. Listen to rig compared to more expensive tables

 After about an hour of listening to the new evo with the rainier, i felt this is one heck of an easy. Listen to rig compared to more expensive tables. It is lacking a very deep bass impact and it's not as dynamic as some in the thousand to fifteen hundred dollar table price range, but geez. It'S one incredible bargain for the price

 At the same time, many cartridges fail to track this properly, resulting in some distortion. Not only did the rainier evo combo track. This fantastically surface noise was super low as well. Next i moved on to the squeeze eastside story album from 1981

BRAND NEW Pro-Ject Debut Carbon EVO Turntable Review!

 Currently listening through Beyerdynanic 770’s as the kiddo is asleep. Overall this system sounds great to me. Good imaging and warm sound for a <$2k setup.

Added Pro-Ject Debut Carbon Espirit, Cambridge DAC, Blue Jeans Cables, and setup speakers according to PS Audio “The Audiophile’s Guide.” Base system is Marantz PM6006 integrated amp, Paradigm Reference Studio 20 v5’s, and Marantz CC4003 CD changer. Currently listening through Beyerdynanic 770’s as the kiddo is asleep. Overall this system sounds great to me

Added Pro-Ject Debut Carbon Espirit, Cambridge DAC, Blue Jeans Cables, and setup speakers according to PS Audio “The Audiophile’s Guide.” Base system is Marantz PM6006 integrated amp, Paradigm Reference Studio 20 v5’s, and Marantz CC4003 CD changer. Currently listening through Beyerdynanic 770’s as the kiddo is asleep.  

Overall this system sounds great to me. Good imaging and warm sound for a <$2k setup. Next steps are floor standing speakers for better range, a new amp with more “audiophile” sound, and a higher end turntable. Most likely in that order. 

I have too much of an engineering/data background to get into the whole cable “thing,” so Blue Jeans are good enough for me.

<div class="md"><p>Added Pro-Ject Debut Carbon Espirit, Cambridge DAC, Blue Jeans Cables, and setup speakers according to PS Audio “The Audiophile’s Guide.” Base system is Marantz PM6006 integrated amp, Paradigm Reference Studio 20 v5’s, and Marantz CC4003 CD changer. Currently listening through Beyerdynanic 770’s as the kiddo is asleep.  </p>

<p>Overall this system sounds great to me. Good imaging and warm sound for a &lt;$2k setup. Next steps are floor standing speakers for better range, a new amp with more “audiophile” sound, and a higher end turntable. Most likely in that order. </p>

<p>I have too much of an engineering/data background to get into the whole cable “thing,” so Blue Jeans are good enough for me.</p>
</div>

I’ve gotta stop the COVID tweaking, or my wife will freak out. Living with this for a bit.

 It'S a bit of a reader's request, shall we say so check in next week for that and hopefully i will see you then, because i'd love to have your company. That'S why, until that bye for now [ Music ], you 

 Swamping the mids, the upper frequency detail, remained wholly intact, offering a host of information and keeping a sense of discipline right across the sound stage. The often aggressive frequencies were noted by the evo guitar was in your face. Percussion was dominant and vocals were distorted and cutting. Yet the evo easily kept the entire track in control and added a balance that enabled the music to retain its inherent rhythm

 You have the debut carbon dc at 299 pounds. You also have the debut carbon record master high res at 649 pounds. This is a more of a lifestyle design that focuses on its built-in analog to digital converter and you've got this. This new design, the debut evo, the latest release from the austrian turntable makers and i've got to say it's probably the most intriguing debut

Welcome to the project debut evo, turntable review and before i start this review, i was sort of reminded by this boxes. Now what you're, seeing in front of you here is the complete series of the us-based crime series appeared on tv every week, the naked city. This is the complete box s. This is the complete four season 29 dvd set

PRO-JECT DEBUT EVO TURNTABLE - IS THIS THE BEST BUDGET TURNTABLE UNDER £500?

The turntable is well designed simple to use. Plays 33. 45, and 78 formats. One button to change between 33/45 speeds

 Recommend using a long nose pliers rather than fumbling with fingers. Plays and sounds great. However, found after plugging in the phono cable on the back of the player a second time, the right channel failed, then was intermittent.

Great Product, great sound, cool design, possible quality control issues.

yotpo

techradar.com

A top quality Moving Magnet Cartridge and Stylus With Black high quality Headshell. Specifications: Freq. Resp. 20-20,000 Channel sep. 1kHz > 15dB Downforce 2.5-3.5 gr

Razdudesnowboarding Ebay

Turntable Guy

Vintage Guns & Stuff

Roger P

r/turntables

 Hey guys, welcome back to Turntable Guy. On the bench today we've got a bit of a sad looking SLD202. This was the replacement for the SLD2. I believe there was a Q202 as well and there may have been a 303, which is full automatic

 Good, not going to touch that grease either, not a whole lot to do on these ones, if they're working, they're usually working well, you don't really see too many issues with these tables. They're workhorses, just like the D2 was, this is very, very heavy, let's see what's going on with these feet here, they're just the cheap style where they press fit through like this, so maybe they're just starting to get a little bit flimsy with age, it looks like the back ones are a little bit taller than the front ones, we won't put the screws back in for now, I'm just going to flip it over and do bearing service on it. I like to use Singer, I'll show you the oil, you can get it all over the place, I just picked this stuff up from eBay, actually this one came from like I think Thailand, that's why there's this writing on here, I think it came from Thailand anyway, so Singer for mechanics, electronics, heavy instruments, sewing machines, bicycles, hand tools, home appliances, joints and hinges, it's great for techniques, I like it because it's lightweight, the Techniques oil is a 10 weight, which is exactly what this stuff is, just put a couple drops right at the top of the bearing here, and that will work its way down, and that's all the lubrication you need on these, same for your SL 1200, any of the 1300, 1400, 1500, all that series, D series, Q series, you just lubricate your direct drive techniques right there at the bottom of the spindle bearing, okay, right there, boom, done, okay, let's see how our speed is now, queuing's nice, drops nice and slow, which is great, power on, and let's see, oh much better already, oh that's great, see, nice and stable now, just a little bit of contact cleaner, 45, so a 45 could use a little bit of an adjustment right, so you can do that on the motor board, we'll probably do that off camera, it's just a matter of going in and hitting those pots right on the motor board, that way when you're switching between 33 and 45, you don't have to constantly play with your pitch adjustment, so it's set, 33's dead on right there, close the dead on, it's nice and stable though, so when you hit 45, you want 45 to be stable too, in this case it's a little fast, so you're going to have to hit the pitch control just a little bit, but that's what those two fine adjustment trim pots are on the motor board, okay, that's great, very simple to service these ones guys, you really don't have a lot to do, if you've got one of these tables, you're lucky, there's so little to do, and as far as the stylus is concerned, we've got here for cartridge Shure, this is one of those Encore cartridges, so this is called an ME95ED, these were made in Mexico at the Shure factory there, this is crooked, so I'm going to readjust that, our alignment on our techniques is 52mm from the tip of the diamond to the gasket on the head shell, and we are at 52, excellent, this might be the original cartridge, let's clean the stylus, I always use a little bit out of alcohol, 70% isopropyl, because I don't know where the stylus has been, so I do like to clean off the garbage that's on there, this one is particularly dirty, it's either dirty or broken, I'm going to have a peek at it with my magnifying glass here, oh it's broken, yeah we got a bum needle, it's bent downwards, so it needs a new stylus, so much for cleaning it, I do want to hear what it sounds like though, make sure we can do an audio test, I'll just use one of my, I keep a spare head shell here with a cartridge that I know is good, and let's just quickly balance this up here, it's a Shure M91ED on our techniques head shell, old style, ok arms balanced, set her back, set your weight to zero, and this cartridge is I believe 1.5 grams, so right there, an anti-scape, 1

 I like to use Singer, I'll show you the oil, you can get it all over the place, I just picked this stuff up from eBay, actually this one came from like I think Thailand, that's why there's this writing on here, I think it came from Thailand anyway, so Singer for mechanics, electronics, heavy instruments, sewing machines, bicycles, hand tools, home appliances, joints and hinges, it's great for techniques, I like it because it's lightweight, the Techniques oil is a 10 weight, which is exactly what this stuff is, just put a couple drops right at the top of the bearing here, and that will work its way down, and that's all the lubrication you need on these, same for your SL 1200, any of the 1300, 1400, 1500, all that series, D series, Q series, you just lubricate your direct drive techniques right there at the bottom of the spindle bearing, okay, right there, boom, done, okay, let's see how our speed is now, queuing's nice, drops nice and slow, which is great, power on, and let's see, oh much better already, oh that's great, see, nice and stable now, just a little bit of contact cleaner, 45, so a 45 could use a little bit of an adjustment right, so you can do that on the motor board, we'll probably do that off camera, it's just a matter of going in and hitting those pots right on the motor board, that way when you're switching between 33 and 45, you don't have to constantly play with your pitch adjustment, so it's set, 33's dead on right there, close the dead on, it's nice and stable though, so when you hit 45, you want 45 to be stable too, in this case it's a little fast, so you're going to have to hit the pitch control just a little bit, but that's what those two fine adjustment trim pots are on the motor board, okay, that's great, very simple to service these ones guys, you really don't have a lot to do, if you've got one of these tables, you're lucky, there's so little to do, and as far as the stylus is concerned, we've got here for cartridge Shure, this is one of those Encore cartridges, so this is called an ME95ED, these were made in Mexico at the Shure factory there, this is crooked, so I'm going to readjust that, our alignment on our techniques is 52mm from the tip of the diamond to the gasket on the head shell, and we are at 52, excellent, this might be the original cartridge, let's clean the stylus, I always use a little bit out of alcohol, 70% isopropyl, because I don't know where the stylus has been, so I do like to clean off the garbage that's on there, this one is particularly dirty, it's either dirty or broken, I'm going to have a peek at it with my magnifying glass here, oh it's broken, yeah we got a bum needle, it's bent downwards, so it needs a new stylus, so much for cleaning it, I do want to hear what it sounds like though, make sure we can do an audio test, I'll just use one of my, I keep a spare head shell here with a cartridge that I know is good, and let's just quickly balance this up here, it's a Shure M91ED on our techniques head shell, old style, ok arms balanced, set her back, set your weight to zero, and this cartridge is I believe 1.5 grams, so right there, an anti-scape, 1.5 grams, alright so, I don't even want to put a platter on this thing, let me see here, I think I have something plastic, there, we can put that down, that will protect my respectful record, and let's plug it in, see what's going on here, it's pretty dirty I gotta say, and somebody's been messing with the ground, this is a joke, let's just clip that ground on, see if we get any hum from my cartridge, no hum, no sound, we'll just check basic operation here, and there's no platter on this right, so there could be some vibration and noise transmitted to the needle, I just don't want to put even one of my crappy platter mats on there, it's too gross, ok, I can't play that for too long, let's see, I do like to check the auto return, because sometimes it does go back a little too soon, let me just try that again, if you rush it, sometimes it won't go, but if you leave it playing on the record, see, I gotta do that off screen because I can't leave it for more than 8 seconds or I'll get a copyright strike, it's supposed to be on an album like this, but it sounds good, runs good, and like I said, there's very little disservice on these things, so if you have a D202, congratulations, you get a great turntable, and it's a good sounding table too, yeah it's good to have one of these, it's just a piece of plastic being put over, it's just good for testing and stuff, so anyway guys, that's a fast one, I haven't had a lot of turntables come in, we had a death in the family, so I haven't been bringing in a lot of tables recently, but going back to servicing a little bit more here, and I hope to get some more interesting turntables, I do get a lot of Technics, that's because Technics sold a ton of turntables back in the day, so you're gonna get a lot of these coming back for service, right, so I hope that doesn't bore you too much, but there are some slight differences between models, and it's always good to document it as far as the service is concerned, so that's the SLD202, thanks for tuning in as always, and I will catch you in the next video, have a great day.

Technics SL-D202: Basic Servicing

5 on here and also too your anti-skate is set to 0. That's giving that cartridge a really nice sound and I did put a nice short cartridge on there. It's an M73 PED. It's got a brand new aftermarket stylus and the needles in great shape so you don't have to worry about that and as you can see at the end of the record it did pick up correctly, return to its cradle and drop and the turntable shuts off

 Also too if you do need to adjust your pitch it's right here. I did clean the pots on that and it is steady at 33 and also at 45 rpms and we're just going to show you that the stop or the reject button is working correctly. If I just press that as you can see the tonearm picks up returns fully to its cradle and drops and the turntable shuts off and this is also a semi-automatic turntable and what that means is it will auto return at the end of the record and just while that's coming to the end of the record I'm just going to go over a couple of the adjustments for the new owner. I do have your counterweight set to 0

 I'm just going to take a quick break, grab a record, and give you a quick demo. All righty and we're back and you have your power button right here. Once you hit that you can see that the strobe illuminates and also too you have your manual queuing lift. Once I hit that as you can see the tonearm picks up

Technics SL D202 Direct Drive Semi Auto Turntable

 There's the light, light's on, 33, alright, now this is the test also for cueing it back up, automatic, and then putting itself in the armature there, and then going back down into the armature, there we go, sorry, there it goes, boom, so it went right down, right down slowly, and then the record will stop, I don't like putting my finger here, a lot of people do, just to stop the turntable, but you shouldn't touch it, you should just let it stop itself, so there again, even though it says automatic, you have to put a cue up, ok, and then go over, record will go on, and then let's go towards the end, now I'm going to cue it down, there it goes down slow, now we'll wait here and watch it, because I think I missed it last time, and this should go automatic back to the armature, to the resting place, here it goes, right now, up, goes back nice, and then I'll go down into there, give it a second, boom, smack, right there, see that, and then the record will stop, now I have one more test, so let's go cue up, and that will bring the armature up, and then I'm going to bring it over, ok, now I don't have it down now, so I'm going to bring it down, it goes down real slow, now here's another one if I want to stop during the record, this is the stop button, so I'm going to push this stop, and then the armature will go up, ready, here we go, push, I stopped it, there it goes up, should cue back over, and it should set itself into cradle, right, there you go, boom, right there, so it stops the record, so there you go, everything works, everything's set, again I don't have my speaker set up, so sorry about that, but again this is just for those couple tests that I just showed everybody how to do it, so you don't want to force this over too, like you don't want to pick it up and force it, you always want to use the cue, so this is the cue down, and that's the cue up, so you can actually just use that, you know, if you want to cue back up, you don't sit there and go over down with your finger and push it down and up, you'll break it, so now I'm going to turn the power off, turns the light off right there, shut the dust cover, it's a great unit, it's a Technics system, turntable system SLD202, and again I have the original box and original packing material, which is in great shape, so yeah, we get a hold on one of these, you know, they're great to have, I know they're coming back, a lot of the young generation now are going back to records, they just love records, so I had a Technics receiver, I have another one downstairs, but I mean my original Technics was back in the 80s, I got it on my 18th birthday, I'm now 50 some years old, but I don't have the original one anymore, you can still get them, but they're like anywhere from 60 to 150 bucks depending on where you get them, so there you go.

 Let's see if I can get back here, alright, ready, there it goes, alright, so I'm going to cue it back up, I'm going to cue it back up like that, slowly, and now I'm going to put it towards the end, and I'm going to show you that it will go automatically, so let's cue it down, there we go. Now, what should happen, actually I'm not, I've still got to bring it down a little closer than that, so let's go up again, alright, let's go right there, alright, cue it down. There's the light, light's on, 33, alright, now this is the test also for cueing it back up, automatic, and then putting itself in the armature there, and then going back down into the armature, there we go, sorry, there it goes, boom, so it went right down, right down slowly, and then the record will stop, I don't like putting my finger here, a lot of people do, just to stop the turntable, but you shouldn't touch it, you should just let it stop itself, so there again, even though it says automatic, you have to put a cue up, ok, and then go over, record will go on, and then let's go towards the end, now I'm going to cue it down, there it goes down slow, now we'll wait here and watch it, because I think I missed it last time, and this should go automatic back to the armature, to the resting place, here it goes, right now, up, goes back nice, and then I'll go down into there, give it a second, boom, smack, right there, see that, and then the record will stop, now I have one more test, so let's go cue up, and that will bring the armature up, and then I'm going to bring it over, ok, now I don't have it down now, so I'm going to bring it down, it goes down real slow, now here's another one if I want to stop during the record, this is the stop button, so I'm going to push this stop, and then the armature will go up, ready, here we go, push, I stopped it, there it goes up, should cue back over, and it should set itself into cradle, right, there you go, boom, right there, so it stops the record, so there you go, everything works, everything's set, again I don't have my speaker set up, so sorry about that, but again this is just for those couple tests that I just showed everybody how to do it, so you don't want to force this over too, like you don't want to pick it up and force it, you always want to use the cue, so this is the cue down, and that's the cue up, so you can actually just use that, you know, if you want to cue back up, you don't sit there and go over down with your finger and push it down and up, you'll break it, so now I'm going to turn the power off, turns the light off right there, shut the dust cover, it's a great unit, it's a Technics system, turntable system SLD202, and again I have the original box and original packing material, which is in great shape, so yeah, we get a hold on one of these, you know, they're great to have, I know they're coming back, a lot of the young generation now are going back to records, they just love records, so I had a Technics receiver, I have another one downstairs, but I mean my original Technics was back in the 80s, I got it on my 18th birthday, I'm now 50 some years old, but I don't have the original one anymore, you can still get them, but they're like anywhere from 60 to 150 bucks depending on where you get them, so there you go.

Technics Automatic SL-D202 Direct Drive Turntable Awesome

 Thanks for looking. Here is this Technics SLD202. This is a direct drive semi-automatic turntable and this video is just to give you a quick demo and also to to show you the cosmetic condition of the item. I just installed the brand new dust cover

 Once that I do that you can see that your light for your speed selector illuminates. Right now it's set up for the 33 and also to your strobe illuminates for you. We're just going to hit the manual cueing lift. That brings the tone arm up, move it right over to the record and also to a nice smooth slow drop and also to this turntable has been completely serviced

 You could see just a tiny tiny little bit on that edge and this edge is also very nice. Overall in very nice condition and also too your top portion is also very clean and you do have your original 45 Technics adapter right there in the back that you can see. You just have just a little bit of marking right here, looks like from the old dust cover. I'm just going to take a quick break, grab a record and give you a quick demo

 We're just going to hit the manual cueing lift. That brings the tone arm up, move it right over to the record and also to a nice smooth slow drop and also to this turntable has been completely serviced. It is 100% plug-and-play ready. All your inside mechanics have been re-lubricated and or adjusted so everything is working correct

Technics SL D202 Semi Auto Direct Drive Turntable

Pro-Ject Debut Carbon vs Technics SL-D202

Reviews by Topic

Sound Quality

QUICK QUESTION!

You might also like