Hiking Boots/Shoes Recommendations?

Hiking boot recommendations?

Any recommendations for women's hiking shoes?

[Request] Hiking/outdoorsy style shoes that can handle lots of walking on concrete

Cold and wet weather hiking boots recommendations?

I am in need of a new pair of trail/hiking boots.

Hiking Boots for heavy use during the summer

Good pair of hiking shoes?

[Request] waterproof hiking shoes

[request] - Good quality walking shoes.

Hello Redditors. I'm in search of a classy yet extremely durable pair of hiking boots to take backpacking around the world for 12+ months with.

Hiking boots recommendations

Men's three season "urban hiker" (like Merrell MOAB but longer lasting)

BIFL Hiking boots for women

Hiking boots with good traction and can stand up to abuse.

Looking for a good pair of shoes for my weird feet

Request - Hiking Sandals

Request: Hiking Boots

Comfortable and cushiony shoes for walking on pavement 10KM/couple hours a day (UK)

Hiking sandals that last?

[Request] Powerful dishwasher with sanitize function?

I want the best god damned dishwasher money can buy.

Looking for the best, easiest to operate, cheapest dishwasher - Recommendation?

[Request] Best countertop dishwasher for reasonable price?

Can anyone recommend a good dishwasher?

Countertop/Portable Dishwasher

[Request] Dishwasher &lt;$1k Australian with QOL features and low water use

Dishwasher for Second Home

My friend bought a house with this KichenAid dishwasher from 1974. He says it works better than any of the other ones he has owned. He just has to convince his wife not to replace it.

What's a good Panel ready dishwasher under $1k?

Best socket set on the market $100-$150

[Request] Socket wrenches

I need a recommendation for a tool set that should last a lifetime. [Request]

Looking for a Mechanics tool set.

23 years later; GM Goodwrench socket set.

A Starter/Lifetime Tool set

Basic screwdriver set needed

Mechanic Tools that are BIFL

Trying to fill a tool roll for my truck and would like input on BFL tools like wrenches, pliers, socket sets, etc.

BIFL: Mastercraft ratchet set with lifetime warranty. Got it at 14, im 31. Went thru more abuse than you think!

Looking to upgrade my home hand tools

Was told to post this here. Husky 270pc toolset from Home Depot for $99, normally $199. Lifetime warranty too

[Request] Ratchet/Wrench/Etc tool set for home/bicycle/general use

Thoughts on a Honda Accord V6 2007?

2010 Honda Accord worth the buy?

Thoughts on a 2008 Honda accord v6 coupe EX-L?

2014 honda accord ??

After an initial round of research it seems like Honda Accord Hybrid is the right answer, but I want to pressure test that with you guys

2014 Accord V6 Touring (any thoughts?)

Which car ?

me again. 2010 2dr honda accord, 122k miles for $5,800. just want a reliable first car, thoughts?

Want to buy an Accord, any suggestions?

2020/2021 Honda Accord LX - Tell Me About Your Likes/Dislikes

Compact - Midsize suv

best small/midsize suv?

Looking for a used (06-14) reliable compact/mid-size SUV

compact/mid size suv

Midsize SUV

Recommendations for midsized SUVs to look at

Compact to Mid-Size SUV

Small to mid-size suv suggestions?

Midsize vehicle for three kids

Mid-Size SUV

Just tried a Lotus Elise Cup 250, driving impressions !

Dan Neil reviews Lotus Emira: As Good As It Gets

Considering a Lotus Elise - USA

How affordable are Lotus Elises from the 2005-2012 model year?

Lotus Exige Sport Final Edition review: farewell, Exige

I wanna know everything you know about a 2005 Lotus Elise

My Lotus Evora Review

Lotus retail sales up 24% in best performance for a decade

2022 Lotus Emira Looks to Be One of the Brand's Best

PURCHASING A LOTUS — Need Tips + Advice.

Looking for a good rpg/action adventure with a good story and good characters

Deep long rpgs?

Looking for a story-focused RPG

Looking for a complex RPG

Fantasy games with an detailed and immersive world?

[WSIB] I am in search for a open world RPG that will keep me busy for hundreds of hours.

Open world game with huge map, lots of things to do, and great graphics

WSIB Feeling a bit of an rpg lull and want something exciting like old school BioWare with a engaging story that doesn’t take 100 hours to play.

WSIB: long, immersive games with high quality storytelling and writing

looking for an open-world rpg

[WSIB] A turn based strategy game that isn’t 4X

Turn-based strategy game

Turn-based strategy games

[WSIB] Small-scale, medieval, strategy game, featuring pikemen and cavalry

(WSIB) Turn-based ”wargaming” game

[WSIB] Turn Based Strategy games

WSIB if I want a strategy game for dummies

WSIB Strategic Rpg

[WSIB] Good offline strategy/(ish) games?

What are some good "smaller scale to control, but still feel large scale battle" tactical / strategy games?

Bullet Hell-Type Games: Atomicrops vs. I, Dracula: Genesis vs. Others?

WSIB if i want a completely story driven indie game but have already played undertale and oneshot (preferably similar to those 2)

Post apocalyptic enthusiast, Underrail or Atom RPG?

[SIB] Undermine or Atomicrops

WSIB if I like "Run into things, need to grow in power/special items to move further so I come back after unlocking said element" type of games.

Blsoodborne or Resident evil 2 ?

What should I buy? Animal Crossing: New Horizons or Doom: Eternal

[WSIB] Fast-paced top-down roguelikes?

[SIB] I Hate Running Backwards or Planetary Dustoff? Or something else?

SIB Nuclear Throne?

What can you recommend for minimizing pores?

I know you can’t get rid of pores but I’m wondering is there anyway to make them smaller? I use La Roche Posay products. They keep my acne mostly at bay but I feel like my pores are just so large. Part of it is genetic, but just wondering if there’s anything else I can do at home to help. Thanks!

OPEN PORES- WHAT TO DO? IS THERE ANY PRODUCT I CAN USE?

What skincare products have you used that helped with large pores?

What is the best thing to use to tighten pores on your face?

Can anyone tell me why my pores are so huge and what I can do to minimize them?

How to reduce pores.

Hey guys, how do I make my pores not look like this? Info in comments (deleted and reposted for an error in the title)

Pores reduction tips?

Advice for shrinking pores on and around nose?

[sun care] sunscreen that doesn’t irritate rosacea and perioral dermatitis

[Sun Care] Looking for sunscreen that doesn't irritate Rosacea

Sunscreen recommendations for rosacea

Looking for a sunscreen for my acne prone skin.

[Sun Care] looking for a sunscreen that works well for people with Eczema.

Desperate for a good sunscreen

Looking for a Daily Suncreen

I’ve tried them all and I still can’t find my holy grail for my dry rosacea skin. Any other recommendations?

Sunscreen, eczema and makeup, Help [Sun care]

[Sun Care] Help with not being able to use Sunscreen

How can i stop a really greasy face?

How to best defeat oily skin?

Is there any long-lasting solution for oily face?

Oily Face -&gt; Wash Face -&gt; More Oily

Extremely oily skin

Y’all know some sort of cream or product I can buy to make my face less greasy looking?

super oily face help needed

Oily Skin— please help!

Really oily skin

How to have less oily skin?

Adrian Krebs

Johannes Engler

Tavis Lochhead

Pioneer DJ Direct Drive DJ Turntable, 10. 80 x 18. 60 x 22. 30 (PLX-1000).

guitarcenter.com

amazon.com

Analogholic

r/turntables

r/audiophile

r/BudgetAudiophile

  All said, this is a very solid, well built, fun to use turntable, that also happens to sound great. If you can get past the quirks mentioned above, it's a great deck.  What did I replace it with? I finally went for it and bought the real deal, the Technics SL1210GR.

 I returned the Pioneer for two reasons; the unattached lid was a pain, and more importantly, the speed was off, very slightly. The strobe showed a pattern on the platter that jittered, barely, but I could see it. This could not be heard with even the most steady tones. I should stress that this was a minor quirk that I have seen on many other turntables

I returned this turntable today. I have been looking for a decent quality turntable for some time now. Until now, I had been using a heavily used Technics SL1200 MK2. It was still performing well, but the cue lever placement and tracking were off, and I just felt like I was missing something sonically

 I just wanted better for $700. The other issue that I dealt with was the loose tonearm bearings, but that was an easy fix.  All said, this is a very solid, well built, fun to use turntable, that also happens to sound great. If you can get past the quirks mentioned above, it's a great deck

Almost...

 The very next track is an instrumental called Mamma Gamma. Again, the presentation was so enjoyable. Punchy deep bass, solid addictive rhythm and timing that makes you want to just turn up the volume and very smooth sounding as well. With the MP10 cartridge installed, it wasn't picking up any surface noise on the record

 It kept timing so well, that's so important to convey the message in a song. And it has stayed in my systems for a very long time. I like it better than the Vintage Techniques SL1200. This Pioneer PLX1000 has better control on the bass and a smoother presentation, I feel

Pioneer PLX 1000 DJ turntable: Audiophile worthy?

Don’t short-change the most important piece… especially in this case, where the turntable switch comes at pretty much no performance cost. Also, ~~FYI **the 1200Mk7 doesn’t include a dust cover** whereas the PLX-1000 does. If this turntable is going to be used for home music enjoyment, where it will live on a piece of furniture (not stored inside a DJ flight case), you really want a dust cover.~~ Actually this may only be true in certain regions

 Assuming you’re in the US, I would recommend using your budget on the Pioneer TT ($700), a set of JBL Studio 530 speakers on their current discount ($240), and a Yamaha A-S301 amplifier ($350, or $320 as a factory refurb).

Howdy all!   
I'm in the process of picking out the gear that I'd like for my setup. So far, the table I will be getting is a Technics SL-1200 MK7. Please advise on what speakers you'd recommend!

<div class="md"><p>Howdy all!<br/>
I&#39;m in the process of picking out the gear that I&#39;d like for my setup. So far, the table I will be getting is a Technics SL-1200 MK7. Please advise on what speakers you&#39;d recommend!</p>
</div>

Building my Setup: Speaker Suggestions &gt;$250

  Build quality is outstanding, definition is far beyond any entry or mid level belt drive table.  Speed is dead on, having had a belt drive with speed control this is in a different league, superior without a doubt.  I have this paired with a Grado wood cartridge and could not be a happier.  If you love vinyl do yourself a favor and buy this table, you will not be disappointed!

This turntable is awesome, very highly recommend.  I am a home listener and have had several belt drive tables from the big companies many are familiar with and supposedly entry level audiophile, and none compare to this table.  Build quality is outstanding, definition is far beyond any entry or mid level belt drive table.  Speed is dead on, having had a belt drive with speed control this is in a different league, superior without a doubt

Outstanding turntable!!!

As a long term audiophile who didn't want to pony up the big $ for a high end table some a step up from value tables from ProJect, Rega, etc, I am super happy with this purchase. Built like a tank, great features and functionality and great sound! The stereophile review is legit. Great table, great value.

Yep it really is all that

powerreviews

audioadvisor.com

musicdirect.com

HiFi Buys

HiDEF LIFESTYLE

Audio Advice

r/magicTCG

r/headphones

The haste is what makes this good potentially although 7 mana is still a lot for White/Red. Feels like a Planar Chaos card a bit but it's cool they are exploring new design space for White/Red.

[STX] Velomachus Lorehold

 It'S extreme stability with almost friction free movement from the high precision bearing assemblies helps. It gather more info from your vinyl for an even wider range of sound. The p3 is available without a cartridge or with the pre mounted Elise cartridge [, Music ] as it sits. The p3 sounds amazing

 A rich, full sound and the bass is incredibly clean and detailed. But as I mentioned, what really makes the plane are three unique from so many others in its class is its ability to be upgraded as you grow in the vinyl hobby. Your tastes and needs may also change as well. Riga designed the three with an upgrade path that will allow the table to grow as technology improves the 24 volt motor used in the p3 and higher models allows for integration with the Neo PSU power supply

 It'S perfect for anyone in the vinyl hobby at any level, if your it's in the p3 major go to our website, hi-def lifestyle, comm, and if you enjoyed this video, please hit like and subscribe, and you too can be enjoying that high-def lifestyle, [, Music, ] [ Applause ], you 

 This most recent version was introduced back in 2016 and has won awards every year since and it's easy to see why the p3 is a belt-driven manual system available in black white or red. The plinth is made from a lightweight particulate core covered with a high gloss, acrylic and then laminated for protection and additional stiffness, like all Riga, turntables. This gives the plants that perfect balance of being lightweight and stable. Riga knows that stability is one of the most important aspects and sound quality, so when they updated to a thicker three millimeter phenolic bottom brace, they also introduced a new metal eyes, skin phenolic top race

Rega Planar 3 Turntable

 For now though, I can't recommend the Marantz PM7000N enough as an all-in-one solution. It sounds great and handles everything I've thrown at it from folk to hip-hop to shoegaze. Currently putting them through their paces with some Guru and Tribe Called Quest.

 The detail is bonkers, and it's nice having a bit more bass 'cause I don't think my neighbor across the hall would appreciate a subwoofer. My next upgrade is replacing the Fluance RT82 with a Rega Planar 3 (unless someone has a better recommendation in the $1000 range) next year around this time, and then I'll probably start looking into cutting the receiver up into separate components a year after that. For now though, I can't recommend the Marantz PM7000N enough as an all-in-one solution. It sounds great and handles everything I've thrown at it from folk to hip-hop to shoegaze

0 B6.2, which are fine, but these KEF Q750s are just a whole other league. The detail is bonkers, and it's nice having a bit more bass 'cause I don't think my neighbor across the hall would appreciate a subwoofer. My next upgrade is replacing the Fluance RT82 with a Rega Planar 3 (unless someone has a better recommendation in the $1000 range) next year around this time, and then I'll probably start looking into cutting the receiver up into separate components a year after that

Picked up the second half of my new speaker set (don't ask) today and I can't even believe the difference. Previously I was using a pair of ELAC Debut 2.0 B6.2, which are fine, but these KEF Q750s are just a whole other league

Neverending Upgrades...

Marks out of ten, now that’s a bit difficult. I’m not saying it’s unimprovable, but the Audiolab/Denton combo works really well and I’d say it’s a more grown-up system than most. Everyone who’s listened to my Dentons or Lintons comes away impressed; more consistently than any others I’ve had. But we’re talking your ears, your taste

OK, great amp and speakers. Have those myself. Not sure you need the DAC as you’ll discover the Audiolab’s DAC is pretty good, but as everybody but me seems to be convinced that an external DAC is the passport to audiophile pleasure and credibility, we’ll let that pass for the moment.

 But I love the Dentons and next to the Lintons, my main speakers, they stand up really well. Eventually they’ll be the rear speakers for my own version of surround, and the mains for my mono system (which you’ll realise will be at the other end of the room).

I don’t find the Dentons too shrill, but I’m 65 so I guess I don’t hear as much up there as younger ones do.  Nonetheless, I’m going to implement the “proven” solution of replacing one of each speaker’s link strips with a 1-ohm 5 watt resistor to balance the sound a little better. But I love the Dentons and next to the Lintons, my main speakers, they stand up really well. Eventually they’ll be the rear speakers for my own version of surround, and the mains for my mono system (which you’ll realise will be at the other end of the room)

OK, great amp and speakers. Have those myself. Not sure you need the DAC as you’ll discover the Audiolab’s DAC is pretty good, but as everybody but me seems to be convinced that an external DAC is the passport to audiophile pleasure and credibility, we’ll let that pass for the moment.

I don’t find the Dentons too shrill, but I’m 65 so I guess I don’t hear as much up there as younger ones do.  Nonetheless, I’m going to implement the “proven” solution of replacing one of each speaker’s link strips with a 1-ohm 5 watt resistor to balance the sound a little better. But I love the Dentons and next to the Lintons, my main speakers, they stand up really well. Eventually they’ll be the rear speakers for my own version of surround, and the mains for my mono system (which you’ll realise will be at the other end of the room).

I have the AT LP120X - I assume yours is the older, non”x” model which is better built but has sound issues with the phono preamp, even when theoretically bypassed. However, I only have it for 78s. It does OK on LPs but compared directly with my aged Thorens TD160 it’s some way short. I also have a Rega Planar 2 for mono LPs (remember the mono system?). That’s a significant upgrade over the AT120, old model or new, but cheaper than the Planar 3 and, critically, less upgradeable. The 3 is a potential money pit as you can upgrade it to the full Planar 6 spec. I find the 2 is pretty good and luckily I caught an ex-demo one at around 25% off. Plenty of other options, though, so worth checking some out. I tend to favour belt-drive, and the Rega being UK-made was a plus for me.

I’d had the Audiolab amp for about a year before I realised it has no tone controls. I just never use them. Hence my interest in the speaker fix above. The resistors are on the slow boat from China, but I’ll report on that as soon as they arrive. The process comes up in one of the Denton reviews. I bought the Dentons on spec during the lockdown and have been well impressed. They improved after about 50-100 hours proper playing, as far as I can estimate, so if yours are still new I’d give them a good running in before you move them on.

Marks out of ten, now that’s a bit difficult. I’m not saying it’s unimprovable, but the Audiolab/Denton combo works really well and I’d say it’s a more grown-up system than most. Everyone who’s listened to my Dentons or Lintons comes away impressed; more consistently than any others I’ve had. But we’re talking your ears, your taste. I’d say hang on to them until you’re certain you NEED to change them and have auditioned something you like better. Spend some time and money on your vinyl playback and listen to as much as you can on your system and to as many other systems as you can. And give the Audiolab DAC a good workout while you’re at it!

<div class="md"><p>OK, great amp and speakers. Have those myself. Not sure you need the DAC as you’ll discover the Audiolab’s DAC is pretty good, but as everybody but me seems to be convinced that an external DAC is the passport to audiophile pleasure and credibility, we’ll let that pass for the moment.</p>

<p>I don’t find the Dentons too shrill, but I’m 65 so I guess I don’t hear as much up there as younger ones do.  Nonetheless, I’m going to implement the “proven” solution of replacing one of each speaker’s link strips with a 1-ohm 5 watt resistor to balance the sound a little better. But I love the Dentons and next to the Lintons, my main speakers, they stand up really well. Eventually they’ll be the rear speakers for my own version of surround, and the mains for my mono system (which you’ll realise will be at the other end of the room).</p>

<p>I have the AT LP120X - I assume yours is the older, non”x” model which is better built but has sound issues with the phono preamp, even when theoretically bypassed. However, I only have it for 78s. It does OK on LPs but compared directly with my aged Thorens TD160 it’s some way short. I also have a Rega Planar 2 for mono LPs (remember the mono system?). That’s a significant upgrade over the AT120, old model or new, but cheaper than the Planar 3 and, critically, less upgradeable. The 3 is a potential money pit as you can upgrade it to the full Planar 6 spec. I find the 2 is pretty good and luckily I caught an ex-demo one at around 25% off. Plenty of other options, though, so worth checking some out. I tend to favour belt-drive, and the Rega being UK-made was a plus for me.</p>

<p>I’d had the Audiolab amp for about a year before I realised it has no tone controls. I just never use them. Hence my interest in the speaker fix above. The resistors are on the slow boat from China, but I’ll report on that as soon as they arrive. The process comes up in one of the Denton reviews. I bought the Dentons on spec during the lockdown and have been well impressed. They improved after about 50-100 hours proper playing, as far as I can estimate, so if yours are still new I’d give them a good running in before you move them on.</p>

<p>Marks out of ten, now that’s a bit difficult. I’m not saying it’s unimprovable, but the Audiolab/Denton combo works really well and I’d say it’s a more grown-up system than most. Everyone who’s listened to my Dentons or Lintons comes away impressed; more consistently than any others I’ve had. But we’re talking your ears, your taste. I’d say hang on to them until you’re certain you NEED to change them and have auditioned something you like better. Spend some time and money on your vinyl playback and listen to as much as you can on your system and to as many other systems as you can. And give the Audiolab DAC a good workout while you’re at it!</p>
</div>

Rate my audio system

 This is what it used to come packaged with, and that's about a three hundred dollar cartridge and the whole package was twelve hundred and forty five dollars. What reaga has done since they can't get this cartridge right now, is they've packaged it with their six hundred dollar exact, two cartridge, it's a yellow cartridge and they're doing it for the same price at 12.45. So what a bargain is that you're getting a 300 more expensive cartridge and you're getting it at the same price as this cartridge, they can't make any more it's a great table

 It'S a multi-density, fiberboard and, and the other turntables from here from above that one and up they use a foam, a racing foam that was developed in formula one racing cars. So that's one of the things as you move up the line that you get and they get even lighter and lighter. They always include their their phono cables are direct wired and attached to the arms so that there's no connection there for purity of sound and they've. Always at this price point put some really good: phono cables on they're, really low, capacitance they've got really great connectors on them and they sound good

 They always include their their phono cables are direct wired and attached to the arms so that there's no connection there for purity of sound and they've. Always at this price point put some really good: phono cables on they're, really low, capacitance they've got really great connectors on them and they sound good. So it saves you the money of having to buy your own set of phono cables. So these come in gloss

 So what a bargain is that [, Music ] start when i want all right: [, Music, ], all right. So this is david and we're here to talk about the regular planer 3, also known as the p3, our most popular turntable at the 2000 and below price point, and my favorite in that that price point as well, we've been selling reggae turntables alan's store has probably For over 20 years - and it's probably sold well over a thousand of them in that time, the planer 3 is the most popular one we sell and it represents, i think, probably the best value in their line and in that price point for any turntable. For that matter, a little history on reagan. They they started in 1973 uh

Rega Planar 3 Turntable Review @HiFi Buys w/ David White

 I mostly dread having to always use multiple controls every time my wife wants to listen to Spotify

 Of all of them.. things like the Nighthawks, TP-Link Archer (not bad), but I actually found the all-in-one modem/router from Comcast to produce the best bandwith and clearest signals for our house. Believe me, we conducted all kinds of tests, etc Who knows?

 things like the Nighthawks, TP-Link Archer (not bad), but I actually found the all-in-one modem/router from Comcast to produce the best bandwith and clearest signals for our house. Believe me, we conducted all kinds of tests, etc Who knows?

So the simple question is, rather than dropping $4,000 for the Nait Uniti Atom, is there a reasonably priced, decent/high-quality CD player that will also handle streaming from the new various sources and push analog thru the outputs??

What could I do to reduce this interference and hum? Would a better power supply help? The Trichord brand ones are way too out of my price range, but I've seen Chinese DIY looking ones on eBay that are similar.

Hi all. My current setup is a Rega Planar 3 with an AT-VM95ML cart, Trichord Dino Mk1 phono (w/ basic power supply, NAD C316BEE V2 and some old Marantz speakers. It's a nice little setup, but I've got a bit of a hum and hiss issue, and I think the phono stage might be the culprit.

When listening through my speakers, the hum is not much of an issue and is only audile when no music is playing and it is very quiet. However, through headphones (Sennheiser HD6XX) it's a different story. They are fairly sensitive headphones, so the hum and hiss is a lot worse. I understand that hiss is inherent in phono stages (I think?), so it's the hum that I think is more the issue

 They are fairly sensitive headphones, so the hum and hiss is a lot worse. I understand that hiss is inherent in phono stages (I think?), so it's the hum that I think is more the issue.

Pioneer DJ PLX-1000 vs Rega Planar 3

Reviews by Topic

Sound Quality

QUICK QUESTION!

You might also like