Hiking Boots/Shoes Recommendations?

Hiking boot recommendations?

Any recommendations for women's hiking shoes?

[Request] Hiking/outdoorsy style shoes that can handle lots of walking on concrete

Cold and wet weather hiking boots recommendations?

I am in need of a new pair of trail/hiking boots.

Hiking Boots for heavy use during the summer

Good pair of hiking shoes?

[Request] waterproof hiking shoes

[request] - Good quality walking shoes.

Hello Redditors. I'm in search of a classy yet extremely durable pair of hiking boots to take backpacking around the world for 12+ months with.

Hiking boots recommendations

Men's three season "urban hiker" (like Merrell MOAB but longer lasting)

BIFL Hiking boots for women

Hiking boots with good traction and can stand up to abuse.

Looking for a good pair of shoes for my weird feet

Request - Hiking Sandals

Request: Hiking Boots

Comfortable and cushiony shoes for walking on pavement 10KM/couple hours a day (UK)

Hiking sandals that last?

[Request] Powerful dishwasher with sanitize function?

I want the best god damned dishwasher money can buy.

Looking for the best, easiest to operate, cheapest dishwasher - Recommendation?

[Request] Best countertop dishwasher for reasonable price?

Can anyone recommend a good dishwasher?

Countertop/Portable Dishwasher

[Request] Dishwasher &lt;$1k Australian with QOL features and low water use

Dishwasher for Second Home

My friend bought a house with this KichenAid dishwasher from 1974. He says it works better than any of the other ones he has owned. He just has to convince his wife not to replace it.

What's a good Panel ready dishwasher under $1k?

Best socket set on the market $100-$150

[Request] Socket wrenches

I need a recommendation for a tool set that should last a lifetime. [Request]

Looking for a Mechanics tool set.

23 years later; GM Goodwrench socket set.

A Starter/Lifetime Tool set

Basic screwdriver set needed

Mechanic Tools that are BIFL

Trying to fill a tool roll for my truck and would like input on BFL tools like wrenches, pliers, socket sets, etc.

BIFL: Mastercraft ratchet set with lifetime warranty. Got it at 14, im 31. Went thru more abuse than you think!

Looking to upgrade my home hand tools

Was told to post this here. Husky 270pc toolset from Home Depot for $99, normally $199. Lifetime warranty too

[Request] Ratchet/Wrench/Etc tool set for home/bicycle/general use

Thoughts on a Honda Accord V6 2007?

2010 Honda Accord worth the buy?

Thoughts on a 2008 Honda accord v6 coupe EX-L?

2014 honda accord ??

After an initial round of research it seems like Honda Accord Hybrid is the right answer, but I want to pressure test that with you guys

2014 Accord V6 Touring (any thoughts?)

Which car ?

me again. 2010 2dr honda accord, 122k miles for $5,800. just want a reliable first car, thoughts?

Want to buy an Accord, any suggestions?

2020/2021 Honda Accord LX - Tell Me About Your Likes/Dislikes

Compact - Midsize suv

best small/midsize suv?

Looking for a used (06-14) reliable compact/mid-size SUV

compact/mid size suv

Midsize SUV

Recommendations for midsized SUVs to look at

Compact to Mid-Size SUV

Small to mid-size suv suggestions?

Midsize vehicle for three kids

Mid-Size SUV

Just tried a Lotus Elise Cup 250, driving impressions !

Dan Neil reviews Lotus Emira: As Good As It Gets

Considering a Lotus Elise - USA

How affordable are Lotus Elises from the 2005-2012 model year?

Lotus Exige Sport Final Edition review: farewell, Exige

I wanna know everything you know about a 2005 Lotus Elise

My Lotus Evora Review

Lotus retail sales up 24% in best performance for a decade

2022 Lotus Emira Looks to Be One of the Brand's Best

PURCHASING A LOTUS — Need Tips + Advice.

Looking for a good rpg/action adventure with a good story and good characters

Deep long rpgs?

Looking for a story-focused RPG

Looking for a complex RPG

Fantasy games with an detailed and immersive world?

[WSIB] I am in search for a open world RPG that will keep me busy for hundreds of hours.

Open world game with huge map, lots of things to do, and great graphics

WSIB Feeling a bit of an rpg lull and want something exciting like old school BioWare with a engaging story that doesn’t take 100 hours to play.

WSIB: long, immersive games with high quality storytelling and writing

looking for an open-world rpg

[WSIB] A turn based strategy game that isn’t 4X

Turn-based strategy game

Turn-based strategy games

[WSIB] Small-scale, medieval, strategy game, featuring pikemen and cavalry

(WSIB) Turn-based ”wargaming” game

[WSIB] Turn Based Strategy games

WSIB if I want a strategy game for dummies

WSIB Strategic Rpg

[WSIB] Good offline strategy/(ish) games?

What are some good "smaller scale to control, but still feel large scale battle" tactical / strategy games?

Bullet Hell-Type Games: Atomicrops vs. I, Dracula: Genesis vs. Others?

WSIB if i want a completely story driven indie game but have already played undertale and oneshot (preferably similar to those 2)

Post apocalyptic enthusiast, Underrail or Atom RPG?

[SIB] Undermine or Atomicrops

WSIB if I like "Run into things, need to grow in power/special items to move further so I come back after unlocking said element" type of games.

Blsoodborne or Resident evil 2 ?

What should I buy? Animal Crossing: New Horizons or Doom: Eternal

[WSIB] Fast-paced top-down roguelikes?

[SIB] I Hate Running Backwards or Planetary Dustoff? Or something else?

SIB Nuclear Throne?

What can you recommend for minimizing pores?

I know you can’t get rid of pores but I’m wondering is there anyway to make them smaller? I use La Roche Posay products. They keep my acne mostly at bay but I feel like my pores are just so large. Part of it is genetic, but just wondering if there’s anything else I can do at home to help. Thanks!

OPEN PORES- WHAT TO DO? IS THERE ANY PRODUCT I CAN USE?

What skincare products have you used that helped with large pores?

What is the best thing to use to tighten pores on your face?

Can anyone tell me why my pores are so huge and what I can do to minimize them?

How to reduce pores.

Hey guys, how do I make my pores not look like this? Info in comments (deleted and reposted for an error in the title)

Pores reduction tips?

Advice for shrinking pores on and around nose?

[sun care] sunscreen that doesn’t irritate rosacea and perioral dermatitis

[Sun Care] Looking for sunscreen that doesn't irritate Rosacea

Sunscreen recommendations for rosacea

Looking for a sunscreen for my acne prone skin.

[Sun Care] looking for a sunscreen that works well for people with Eczema.

Desperate for a good sunscreen

Looking for a Daily Suncreen

I’ve tried them all and I still can’t find my holy grail for my dry rosacea skin. Any other recommendations?

Sunscreen, eczema and makeup, Help [Sun care]

[Sun Care] Help with not being able to use Sunscreen

How can i stop a really greasy face?

How to best defeat oily skin?

Is there any long-lasting solution for oily face?

Oily Face -&gt; Wash Face -&gt; More Oily

Extremely oily skin

Y’all know some sort of cream or product I can buy to make my face less greasy looking?

super oily face help needed

Oily Skin— please help!

Really oily skin

How to have less oily skin?

Adrian Krebs

Johannes Engler

Tavis Lochhead

TU150 functionalities are inspired by the market leaders TU100 and TU200 Notable improvements include a redesign of the iconic handle which is now Retractable and can Vanish seamlessly into the chassis top panel to leave room to a stylish system for all to admire In addition the top panel gained depth from the handle leaves enough room for proper cable management An essential feature in mini- its cases i/O ports 2x USB3 0 1x Type C audio on the top m/B Type Mini-ITX/ mini-dtx system fan 1x 12cm in the front (optional) 1x 12cm in the rear(optional) psu SFX or SFX-L

amazon.com

UFD Tech

JDTechGear

Paul's Hardware

Optimum Tech

r/buildapcsales

r/buildapc

r/pcmasterrace

r/sffpc

...WHY  The good: -has a handle, that should be the only reason you buy this case, there are plently of other, better made ITX cases without handles that are a better build and experience and look more classy -It's got good airflow -has a closed top for pilling stuff on (doesn't seem to gimp airflow -works with my hybrid 2080ti -$100 is a fair price for this case  It's a pc case, I stopped caring about RGB or staring at my case more than my monitor and I wanted to be able to easily carry it with me on my photo/video shoots (where I go for a week at a time) so I can edit and cull with ease

.WHY  The good: -has a handle, that should be the only reason you buy this case, there are plently of other, better made ITX cases without handles that are a better build and experience and look more classy -It's got good airflow -has a closed top for pilling stuff on (doesn't seem to gimp airflow -works with my hybrid 2080ti -$100 is a fair price for this case  It's a pc case, I stopped caring about RGB or staring at my case more than my monitor and I wanted to be able to easily carry it with me on my photo/video shoots (where I go for a week at a time) so I can edit and cull with ease. Now I just wish I could find a GPU that can power a monitor and run display over a single TB3 port for 1 power, cable and 1 monitor cable and wireless peripherals. That would be idea and awesome

Good.  I mean quite Good, first draft of a case.

 That was the original build that was put together in this case, which featured a race spire cooler for our 3700X CPU, the Gigabyte B450i Aorus Pro Wi-Fi motherboard, which I was able to update the UEFI on to be compatible with our Ryzen 3000 series processor. The memory was of course the DDR4 kit running at 3600 castle NC16, and after a 10 minute IDA64 burn-in test, our CPU's peak temperature hit 85.6 degrees celsius, which is pretty warm, but not to the point where it's going to shut the system down or anything, although if we were able to lower that temperature we'd probably get a little bit better frequencies out of our processor. Average temperature after 10 minutes was 82

 I've been using the Lian Li BR series digital 120mm fans, so I dropped those in there too, and we're looking at around $2,300 as compared to when I originally parted the system out in this case, which is a 1550, so you want to spend more money to get the appropriate system, in my opinion, to put in the Lian Li TU150. That is, of course, just my opinion though, so I'm curious what your opinions are about this case, about the sort of process I've gone through when it comes to choice of components, swapping things in and out, my admittedly flawed testing methodologies for this video, but I would be very curious to know what you guys think of this in the comments section down below, and of course, if you enjoyed this video, hit the thumbs up button on your way out. Thank you guys so much for watching, I will link the parts I've used as well as the other videos I did on the components in this case in the description, and we'll see you guys in the next video.

 Case in point, today we're going to be testing this system that I put together in the Lian Li TU150 Mini ITX or Mini DTX case and it's a tale of mixed feelings about my choices, an early build that I did with hardware that wasn't final, some mixed testing, and my updated thoughts now that I've worked with it for a couple weeks. Sometimes parts that I work with seem to have a natural fit and I think there is a perfect build for this case which I almost pulled off, but not quite. I'll cover the ideal build in this case in my humble opinion at the end of this video. Excellent! Before any of that though, when I initially put this system together over a month ago, there were some questions

 Long story short, it did not. It was not compatible when I did XMP settings out of the box. I tried several times to tweak the tunings and the timings to go for lower frequency or looser timings. Eventually I decided for the sake of testing to just not use this kit

UPGRADING and TESTING My $1750* Lian Li TU150 Build!

  Pros: - The carrying handle; the biggest factor that lead me to buying this in the first place - Part compatibility; This thing can handle beefy GPUs, up to a point. I have an EVGA 2080 Super XC Ultra, and there's still plenty of length left. It is also a 2.75 slot card

 - Cable cutout size: The biggest headache for me was routing the all cables through one hole above the PSU to keep them out of sight for a cleaner build. It NEEDS to be wider; same goes for the cutout right by the PSU vent, as the 24pin and GPU cables are needed to route through there. - space behind the motherboard tray is on the thin side. While the forward portion is indented, the amount of cables that need to be routed through it demands more volume, while the more rear portions have sparse cable tie points

  Cons: - Size: Ironically, the case's size also become a hindrance because it's slightly too big for SFX PSU cables to route in an aesthetically pleasing way, while being too small when using extensions. It practically begs custom length cables. - Cable cutout locations and sizes: It's as if the designers knew some cables would be too short so they added more cutouts, but I feel like to do this, they had to sacrifice other possible points to keep the integrity of the case. More on this on the next point

Almost 5 stars

This case is great - it's beautiful, it's pretty well designed for airflow given the small form factor, and the handle is amazing. I bought this case so I would be able to carry it onto a plane with me, and while I haven't tried that yet it seems like the perfect solution to PC transport. The materials of the case are really nice. Building in this case was fairly straightforward for an ITX case

 The materials of the case are really nice. Building in this case was fairly straightforward for an ITX case. The HDD and SSD mounting solution is pretty smart and makes it easy to plug in cables before slotting drives into place. There's plenty of room for my Gigabyte GTX 1080

 This tends to lead to a bit of a cable mess in the top right corner of the case, which is smartly blocked out by the glass panel. There isn't really enough depth behind the motherboard for easy cable routing and especially SATA cables are annoying to deal with. However after some finagling everything will fit and you will have a beautiful PC that is also portable. 8/10 would buy again

 However after some finagling everything will fit and you will have a beautiful PC that is also portable. 8/10 would buy again. There really isn't another case like it.

Awesome Case

 Another issue is with the paint, I bought the black version and I was super careful as I knew the paint would have a chance of scratching. I plotted each panel on a smooth surface and 2 of the panels decided to scratch and now there’s a couple silver scratches on both of the panels which really messed with my OCD. One of the letters of Lian Li on the front panel also fell off for some reason which was dumb. There’s a couple more issues I had with it but they weren’t as bad as the first 3 I listed

Find another mini itx case

 Also it has a usb c on the front if you have a board to support the feature.  The handle is very solid and I wouldn't hesitate to carry this anywhere with it.  My review is kindof all over the place but I give this a 10/10. If you have some big air cooling on your hardware but want it fairly small with a handle to carry it, this is absolutely the case to get

  My review is kindof all over the place but I give this a 10/10. If you have some big air cooling on your hardware but want it fairly small with a handle to carry it, this is absolutely the case to get.

 Also for how large the case there is only 1 front 120mm and 1 back 120mm. There is 2 slots below the gpu as well. But with my gpu which is not really that THICC I could barely fit 15mm slim fans (used a measuring tape, I will buy them at a later time to improve gpu temps). With that all being said I have 2 cheaper arctic fans on the front and back and no fans under the gpu and I get pretty decent temps for my hardware

Wonderful Mini ITX that can fit most hardware.

 For the TU150 though, it definitely gets my recommendation overall for an ITX system that isn't sweating the details when it comes to space optimization and airflow optimization and things like that. If you're not sweating that sort of stuff, then the TU150 is definitely appropriate. It does offer the aluminium and tempered glass aesthetic that so many people have been waiting for at an affordable price point. So guys, I would love to know your thoughts down below on the Leanly TU150

 For air intake, the front panel does have a quiet large gap at the bottom for air to be pulled in by a 120mm fan, and below the GPU we're able to fit two 120mm fans quite comfortably, just like the NCase M1. So, radiator placement and water cooling support for a case of this size is honestly lacking a little. There's no 240mm AIO support that you'll find in the NCase M1, just a slot for a single 120mm AIO at the rear. When I saw this case at Computex, I initially thought that a dual 120mm AIO configuration was possible, but unfortunately the fan slot at the front of the case is positioned too high towards the power supply, so although a 120mm fan will fit, a radiator will not

 Now let's talk about the thermals. So, starting with the CPU thermals with our 9900K, the Lian Li TU150 is giving us a very strong performance. Despite the TU150 being mostly closed off, it's able to brute force its way to the top end of the stack by leveraging the NH-D15. The NCase M1 still keeps the top result though, and if the TU150 was better ventilated, then it would have easily been able to beat this result, as would the Silverstone LD03 when using the NH-U12A

 So, there is stiff competition from NZXT. Now the reason that I'm making a strong comparison against the NCase M1 as well is that, for one, they look very similar, and because Li & Li actually do the manufacturing for the NCase M1. That's why the aluminium panels look identical, available in both silver and black by the way. They're also using the same toaster feet that I've never been a fan of, and also the same pushpin mechanism for the side panels, which does secure things nicely

Lian Li TU150 Review - A Thicc Ncase M1?

 Airflow is actually quite decent for an ITX case. And then the cable routing options are fantastic. It has basically everything that you would expect in an ATX case shrunk down into an ITX portable form factor. Leanly has actually done a lot of things right with getting a small case ready here

 So one of the biggest things about this TU150 is that it just screams the best land case that you could possibly get for portability, for hauling around. And I want to go over the construction and design of it first to kind of give you an idea of what this case has. So it has the beautiful, super smooth brushed aluminum on the top, the side and the front side panels. You have the tempered glass here and it's been designed to creatively block this cable mess right up here with the cutout on the tempered glass

 And Reece said I have to give it an extra 100 bonus points because it's just so freaking sexy. So let me know what you think of the TU150 down below in the comments. Is this something that you would pick up, especially if you travel to lands lot? Is the portable handle case something that you like or is the handle more of a gimmick to you? I mean, for $110 is actually a great price for a mini ITX case, even if you're not necessarily going for the handle portion of it. So let us know down below what you think

The Ultimate Portable LAN Case? - LIAN LI TU150 Review

Case/Stand: XTIA Xproto-L w/ AIO Bracket and Carrying Handle. Motherboard: Asus ROG STRIX B550-I GAMING - Mini ITX. PSU: ADATA XPG CORE Reactor - 850W / Modular ATX. GPU: EVGA GeForce RTX 3080 FTW3 ULTRA GAMING

First Time PC Build - XTIA Xproto-L - EVGA 3080 FTW3 Ultra Gaming - Ryzen 7 5800x

Very solid build and easy to put together this is a great ITX testbench for those in need of an SFF solution. Will also work well for an open PC design if that is what you want. Might not be the not stylish but well made.

Excellent ITX Testbench

0 riser cable which can pose compatibility issues if you're using both a GPU and motherboard with PCIe Gen 4. Luckily though they do actually provide an upgrade to a Gen 4 cable for around $50 which is actually a really solid deal and again highly recommended if you are using both a PCIe Gen 4 motherboard and GPU. And the last thing that I'll mention here is the support for custom liquid cooling with brackets that allow you to mount pumps, reservoirs and radiators. Given the depth and build opportunity here I thought it would be best to just save this for a full custom loop build in the future which I'm really excited for so do hit that subscribe button if you haven't already

 Now there is also the Xproto L if you need triple slot card support which is perfect for those bigger RTX 3080s and 3090s. The performance of the 3090 FE would probably be okay here as well but again there is some restriction for that flow through cooler. The airflow can pass into the spine of the case but then it kind of gets trapped and doesn't have anywhere to go. Ideally the Xproto works best with conventional open air coolers with the exhaust airflow blowing out the front and the back of the card

 And the last thing that I'll mention here is the support for custom liquid cooling with brackets that allow you to mount pumps, reservoirs and radiators. Given the depth and build opportunity here I thought it would be best to just save this for a full custom loop build in the future which I'm really excited for so do hit that subscribe button if you haven't already. So honestly really impressed we've got the team over at XTier have done with the Xproto when I first reviewed it nine or so months ago I did not expect this amount of brackets and modules. It really does make for a lot of different opportunities and it does make a meaningful impact to the user experience and also the cooling potential as well

 There we do get excellent GPU thermal and noise performance as we've seen previously with the RTX 2070 Super so just keep that in mind. Another thing to keep in mind is that the Xproto by default ships with a PCIe 3.0 riser cable which can pose compatibility issues if you're using both a GPU and motherboard with PCIe Gen 4. Luckily though they do actually provide an upgrade to a Gen 4 cable for around $50 which is actually a really solid deal and again highly recommended if you are using both a PCIe Gen 4 motherboard and GPU

The Watercooled Open Case – XPROTO

Lian Li PC-TU150 vs XTIA Xproto

Reviews by Topic

Build Quality

Portability

Cooling

QUICK QUESTION!

You might also like