Hiking Boots/Shoes Recommendations?

Hiking boot recommendations?

Any recommendations for women's hiking shoes?

[Request] Hiking/outdoorsy style shoes that can handle lots of walking on concrete

Cold and wet weather hiking boots recommendations?

I am in need of a new pair of trail/hiking boots.

Hiking Boots for heavy use during the summer

Good pair of hiking shoes?

[Request] waterproof hiking shoes

[request] - Good quality walking shoes.

Hello Redditors. I'm in search of a classy yet extremely durable pair of hiking boots to take backpacking around the world for 12+ months with.

Hiking boots recommendations

Men's three season "urban hiker" (like Merrell MOAB but longer lasting)

BIFL Hiking boots for women

Hiking boots with good traction and can stand up to abuse.

Looking for a good pair of shoes for my weird feet

Request - Hiking Sandals

Request: Hiking Boots

Comfortable and cushiony shoes for walking on pavement 10KM/couple hours a day (UK)

Hiking sandals that last?

[Request] Powerful dishwasher with sanitize function?

I want the best god damned dishwasher money can buy.

Looking for the best, easiest to operate, cheapest dishwasher - Recommendation?

[Request] Best countertop dishwasher for reasonable price?

Can anyone recommend a good dishwasher?

Countertop/Portable Dishwasher

[Request] Dishwasher &lt;$1k Australian with QOL features and low water use

Dishwasher for Second Home

My friend bought a house with this KichenAid dishwasher from 1974. He says it works better than any of the other ones he has owned. He just has to convince his wife not to replace it.

What's a good Panel ready dishwasher under $1k?

Best socket set on the market $100-$150

[Request] Socket wrenches

I need a recommendation for a tool set that should last a lifetime. [Request]

Looking for a Mechanics tool set.

23 years later; GM Goodwrench socket set.

A Starter/Lifetime Tool set

Basic screwdriver set needed

Mechanic Tools that are BIFL

Trying to fill a tool roll for my truck and would like input on BFL tools like wrenches, pliers, socket sets, etc.

BIFL: Mastercraft ratchet set with lifetime warranty. Got it at 14, im 31. Went thru more abuse than you think!

Looking to upgrade my home hand tools

Was told to post this here. Husky 270pc toolset from Home Depot for $99, normally $199. Lifetime warranty too

[Request] Ratchet/Wrench/Etc tool set for home/bicycle/general use

Thoughts on a Honda Accord V6 2007?

2010 Honda Accord worth the buy?

Thoughts on a 2008 Honda accord v6 coupe EX-L?

2014 honda accord ??

After an initial round of research it seems like Honda Accord Hybrid is the right answer, but I want to pressure test that with you guys

2014 Accord V6 Touring (any thoughts?)

Which car ?

me again. 2010 2dr honda accord, 122k miles for $5,800. just want a reliable first car, thoughts?

Want to buy an Accord, any suggestions?

2020/2021 Honda Accord LX - Tell Me About Your Likes/Dislikes

Compact - Midsize suv

best small/midsize suv?

Looking for a used (06-14) reliable compact/mid-size SUV

compact/mid size suv

Midsize SUV

Recommendations for midsized SUVs to look at

Compact to Mid-Size SUV

Small to mid-size suv suggestions?

Midsize vehicle for three kids

Mid-Size SUV

Just tried a Lotus Elise Cup 250, driving impressions !

Dan Neil reviews Lotus Emira: As Good As It Gets

Considering a Lotus Elise - USA

How affordable are Lotus Elises from the 2005-2012 model year?

Lotus Exige Sport Final Edition review: farewell, Exige

I wanna know everything you know about a 2005 Lotus Elise

My Lotus Evora Review

Lotus retail sales up 24% in best performance for a decade

2022 Lotus Emira Looks to Be One of the Brand's Best

PURCHASING A LOTUS — Need Tips + Advice.

Looking for a good rpg/action adventure with a good story and good characters

Deep long rpgs?

Looking for a story-focused RPG

Looking for a complex RPG

Fantasy games with an detailed and immersive world?

[WSIB] I am in search for a open world RPG that will keep me busy for hundreds of hours.

Open world game with huge map, lots of things to do, and great graphics

WSIB Feeling a bit of an rpg lull and want something exciting like old school BioWare with a engaging story that doesn’t take 100 hours to play.

WSIB: long, immersive games with high quality storytelling and writing

looking for an open-world rpg

[WSIB] A turn based strategy game that isn’t 4X

Turn-based strategy game

Turn-based strategy games

[WSIB] Small-scale, medieval, strategy game, featuring pikemen and cavalry

(WSIB) Turn-based ”wargaming” game

[WSIB] Turn Based Strategy games

WSIB if I want a strategy game for dummies

WSIB Strategic Rpg

[WSIB] Good offline strategy/(ish) games?

What are some good "smaller scale to control, but still feel large scale battle" tactical / strategy games?

Bullet Hell-Type Games: Atomicrops vs. I, Dracula: Genesis vs. Others?

WSIB if i want a completely story driven indie game but have already played undertale and oneshot (preferably similar to those 2)

Post apocalyptic enthusiast, Underrail or Atom RPG?

[SIB] Undermine or Atomicrops

WSIB if I like "Run into things, need to grow in power/special items to move further so I come back after unlocking said element" type of games.

Blsoodborne or Resident evil 2 ?

What should I buy? Animal Crossing: New Horizons or Doom: Eternal

[WSIB] Fast-paced top-down roguelikes?

[SIB] I Hate Running Backwards or Planetary Dustoff? Or something else?

SIB Nuclear Throne?

What can you recommend for minimizing pores?

I know you can’t get rid of pores but I’m wondering is there anyway to make them smaller? I use La Roche Posay products. They keep my acne mostly at bay but I feel like my pores are just so large. Part of it is genetic, but just wondering if there’s anything else I can do at home to help. Thanks!

OPEN PORES- WHAT TO DO? IS THERE ANY PRODUCT I CAN USE?

What skincare products have you used that helped with large pores?

What is the best thing to use to tighten pores on your face?

Can anyone tell me why my pores are so huge and what I can do to minimize them?

How to reduce pores.

Hey guys, how do I make my pores not look like this? Info in comments (deleted and reposted for an error in the title)

Pores reduction tips?

Advice for shrinking pores on and around nose?

[sun care] sunscreen that doesn’t irritate rosacea and perioral dermatitis

[Sun Care] Looking for sunscreen that doesn't irritate Rosacea

Sunscreen recommendations for rosacea

Looking for a sunscreen for my acne prone skin.

[Sun Care] looking for a sunscreen that works well for people with Eczema.

Desperate for a good sunscreen

Looking for a Daily Suncreen

I’ve tried them all and I still can’t find my holy grail for my dry rosacea skin. Any other recommendations?

Sunscreen, eczema and makeup, Help [Sun care]

[Sun Care] Help with not being able to use Sunscreen

How can i stop a really greasy face?

How to best defeat oily skin?

Is there any long-lasting solution for oily face?

Oily Face -&gt; Wash Face -&gt; More Oily

Extremely oily skin

Y’all know some sort of cream or product I can buy to make my face less greasy looking?

super oily face help needed

Oily Skin— please help!

Really oily skin

How to have less oily skin?

Adrian Krebs

Johannes Engler

Tavis Lochhead

The A4-H2O is an 11-liter small form factor case, a collaboration project with DAN Cases. Based on the original DAN A4-SFX case sandwich layout concept, the A4-H2O continues the minimalist and compact form factor with improved hardware compatibility (including AIO water cooling) and simplifies installation

amazon.com

pcmag.com

Gear Seekers

Christopher Flannigan

PCWorld

Optimum Tech

Hardware Canucks

r/sffpc

Lian Li A4 H2O gets my seal of approval 👍. Good build quality, easy to work with, not too big, good pricing (with pcie 4.0 cable included), no major flaws unlike all other ITX cases that i have used so far.

Lian Li A4 H20 without the H2O

The media could not be loaded. Overall this case is really well made. Best part is it fits in my backpack for carry on flights. Aio fitment is a bit of a challenge but so far the NZXT x53 cracken and Corsair H100i Capellix fit when tubes are routed over ram and under power supply (in picture

Quality metals and Paint.

 So the cooler I have with the tube length that I have, I prefer doing it the other way for the routing towards the bottom because that way it didn't kink the tubes quite so hard. For a graphics card of this size, unfortunately, for it to fit, I did have to change how I routed those tubes and you can kind of see it here that it's a little bit like, which I don't prefer, but to make this work, that's what you have to do. Something to keep in mind, everybody is going to have a little bit of a different experience with that because how you mount the water block, the exact length of the tubes varies a little bit from all-in-one cooler to all-in-one cooler. This particular Corsair model that I have happened to work out this way

 Something to keep in mind, everybody is going to have a little bit of a different experience with that because how you mount the water block, the exact length of the tubes varies a little bit from all-in-one cooler to all-in-one cooler. This particular Corsair model that I have happened to work out this way. So did that, got this in the front door, everything fits, although, you know, as you can also see at the bottom of the case here, I will have some little finishing to do, shall we say, with these stiff braided cables that I was mentioning, again, like I said earlier, softer braided cables are likely the best way to go with this case, in my opinion. But to get to the main part of the story, I am digressing here a little bit, is that it's this width here, the height of the car, that's the problem because originally I tried the 6800 XT and this particular Asus TUF gaming model has this, shall we call it, protrusion on the fan shroud here, looks very cool, you know, makes it look real tough, but because of that extra width, I could not, for love or money, get this card into this case and you can see from the battle scars right here that I tried, oh my friends, let me tell you, I tried so hard to get this card into this case, like I tried wiggling through the front door, or sorry, the front panel opening, I tried, you know, maneuvering it like this way and like trying to squish it back this way, I even took out the riser cable, unmounted that, plugged it in, plugged this into the riser cable's PCIe slot first so I could, with the hope that maybe I could kind of wiggle it in, get it down and then like remount the riser cable because my biggest problem was like trying to get enough maneuvering room in here so I could actually sit this card into that slot, nothing worked, I eventually had to admit defeat, it was a sad, bitter moment for me

 You've got the silver, as you see here, and then you have an all black variant as well. These cases, or this case I should say, are made out of aluminum panels on the outside and then you've got a steel chassis on the inside. For dimensions, you're looking at 326 millimeters in length, 140 millimeters in width, and 240 millimeters in height. In freedom units, Merica, that is 2

 So did that, got this in the front door, everything fits, although, you know, as you can also see at the bottom of the case here, I will have some little finishing to do, shall we say, with these stiff braided cables that I was mentioning, again, like I said earlier, softer braided cables are likely the best way to go with this case, in my opinion. But to get to the main part of the story, I am digressing here a little bit, is that it's this width here, the height of the car, that's the problem because originally I tried the 6800 XT and this particular Asus TUF gaming model has this, shall we call it, protrusion on the fan shroud here, looks very cool, you know, makes it look real tough, but because of that extra width, I could not, for love or money, get this card into this case and you can see from the battle scars right here that I tried, oh my friends, let me tell you, I tried so hard to get this card into this case, like I tried wiggling through the front door, or sorry, the front panel opening, I tried, you know, maneuvering it like this way and like trying to squish it back this way, I even took out the riser cable, unmounted that, plugged it in, plugged this into the riser cable's PCIe slot first so I could, with the hope that maybe I could kind of wiggle it in, get it down and then like remount the riser cable because my biggest problem was like trying to get enough maneuvering room in here so I could actually sit this card into that slot, nothing worked, I eventually had to admit defeat, it was a sad, bitter moment for me. So when you are picking a card and if you are going to be looking at cards of this kind of heft, definitely pay attention to these kind of details about how much room it takes height wise because you are going to be looking at a thick card regardless so that already reduces your maneuverability so don't make it even harder for yourself or impossible because you've also taken off what remaining space you have to wiggle things around. So the best summary for this case is actually something that my past self left in a note to my current self and I'm just going to quote it directly

Lian Li x Dan A4-H20 Tour & Build Thoughts After Over A Month Of Use

 So let's talk about the good. The case is extremely easy to handle. All of the exterior panels are toolless with those Lian Li pushpins and thumb screws at the back. And everything that is attached to the frame has the same screw, avoiding any confusion when it comes to building the case back together

 And the side panels are not a significant barrier, as you can see. On the GPU side, it is also very well controlled because of the exhaust. So no heat gets trapped inside that GPU chamber. And this is really impressive because the case is tiny and all the cooling is achieved with those two 120 millimeter fans

SO CLOSE to Perfect - Lian Li x DAN A4-H20 Review

 And I think the timing here is absolutely perfect. There is no other case right now that can fit these components in this size. The NCase M one is a little bit bigger, and the Form T one is a little bit smaller, but both are just unavailable. The new A4 H20 fits right in between those two legendary ITX cases, both in terms of size and hardware compatibility, but it's quite a bit cheaper and will actually be available to buy

 Now as a point of reference when we drop in the RTX 2070 Super Founder's Edition and compare that to the rest of our test data, performance is pretty good overall. It's two degrees better than the Form T1 when both cases are running a top-mounted 240mm AIO, and only a few degrees warmer than one of the highest airflow mid-towers that you can buy at the moment. All in all, it's about the kind of GPU thermals that you'd expect coming from a Dan case of this size, and all of the cases that it's beaten by on this list are in fact larger cases, so do keep that in mind. As for current Founder's Edition cards like the RTX 3080, that would also be a good pairing here for the A4 H2O, but you would need to install the included standoffs for the riser cable

 So overall, pretty impressed, and I would say that this is one of the best ITX cases that you can buy at the moment, alongside the Meshlicious and the NR200P Max. Those are slightly bigger cases, in some people's eyes they are considerably larger cases, but this is as small as I would recommend going if you're also considering the sizes and the thermal constraints of modern hardware. So if you're considering a three slot GPU, if you're considering an i7, this is about as small as I would recommend going. I would especially recommend this case if you're not going super crazy with your components, so 12600K, RTX 3070, that would run pretty much perfect here in my opinion, and up to a 3080, 6800 XT would also be fine, but there you definitely want to go with a big cooler design and maybe even consider undervolting

 And to be honest, I think this is about as small as you can make a PC case today, while still retaining the full hardware compatibility and thermal performance of modern high-end components. We're talking huge 3-slot graphics cards and support for 240mm liquid coolers, all in a PC case this small. And I think the timing here is absolutely perfect. There is no other case right now that can fit these components in this size

Tiny Case with Perfect Fitment – Dan A4-H2O

5-by-12.8-inch patch on your desk. The box has a similarly diminutive under-10-inch height. The biggest surprise, though: This Mini-ITX chassis lets you pack some very serious componentry in a seriously small space

Mind you, we won&rsquo;t be blaming Corsair for having noisy fans, as most people won&rsquo;t be using this case with an overclocked processor in our extreme test conditions: while running Prime95 small-FFTs and FurMark simultaneously. These particular fans are also known for winding down nicely when less-stressed systems are configured with automatic fan control. This is just a (very) worst case scenario.

But get the right mix, and this chassis will vie with the Streacom DA2 V2 as one of our favorite Mini-ITX chassis for tricked-out builds. And it won't cost you half of what the DA2 V2 will.

 The $35 difference between these cable options is hardly marginal on a case model that has a US base price of $120, so you'll want to be sure you really need the 4. (We will be expanding our testing pool in coming months.) So, for now, we tested the A4-H2O against itself in closed-panel and open-panel configurations to see how well it would contain noise and let out heat.

Lian Li A4-H2O Review

 Moving on to the things I liked about the case I think the first thing was the design I think this looks great and as we've already mentioned it was really straightforward to build in. And in terms of build quality it was excellent I think the all aluminium panels work very well and it really felt like you were building in a premium case. Just how all the panels came off how everything was compartmentized and how everything was designed to go together felt really really premium and I really enjoyed building in the case. I don't want to list all the cases featured again but the two main features I thought worked really well in this case one was the radiator cover hiding everything away and the other thing I really liked was the large cutout at the front which meant you were actually able to install a GPU that was too big to fit through the cutout at the side

99. The A4 HTO features four removable aluminium panels, the one on the top is 2mm thick, while the ones on the side and the front are 1.5mm thick. Taking a look at the case's front AIO, we've got a single USB type A and single USB type C connector, we've got separate headphone and microphone jacks and a power button

 Just how all the panels came off how everything was compartmentized and how everything was designed to go together felt really really premium and I really enjoyed building in the case. I don't want to list all the cases featured again but the two main features I thought worked really well in this case one was the radiator cover hiding everything away and the other thing I really liked was the large cutout at the front which meant you were actually able to install a GPU that was too big to fit through the cutout at the side. So this feature I think in particular was absolutely brilliant. Moving on to things I didn't like about the case and there's very little to say here but there is two features I do think it's important that I point out

Lian Li | DAN A4-H2O Review

Robeytech Live

Bitwit

r/buildapcsales

r/buildapc

 Granted we are using an updated 280ml cooler but the thermal difference here between the Z63 and X62 in my testing showed less than 1 degree. So the best CPU thermals in this case are achieved with a positive pressure setup bringing fresh air in through the front panel, thermals are around 7 degrees better there compared to a negative pressure setup. But the reverse is true for GPU thermals as we expected, there negative pressure actually works better since we're encouraging fresh air through the side panels and assisting the graphics card fans, our results there land us right around the end case M1. There's no reason you couldn't run some of the beefiest, most power hungry GPUs on the market in this case, there is plenty of ventilation to support that but there's just not enough active cooling in the way of extra fans to push it to the top of the stack to beat something like an NR200

 Also if you are interested in building a custom loop in this case there isn't much room at the bottom for a pump or a reservoir but with a clearance of 72 millimeters you will be able to use the Barrow CPU pump lock and reservoir that we took a look at recently that along with a set of low profile fittings would be an excellent way to get a custom loop up and running in this case. Now the airflow setup in this case you can either go with a positive pressure setup which is going to be a little bit better for CPU thermals or a negative pressure setup which is going to be a little bit better for GPU thermals so with positive pressure that's kind of how I think most people would intuitively build in this case that's going to be pulling air from the front and then pushing it through the side panels. Negative pressure is going to be the reverse of that of course encouraging air through the side panels and pushing air onto the radiator this way. Typically negative pressure is what is recommended for sandwich layout cases like this or the Form T1 or the Ghost S1 that way you really are benefiting from all of that kind of air that's coming through the side panels and assisting the small fans on your graphics card

 Negative pressure is going to be the reverse of that of course encouraging air through the side panels and pushing air onto the radiator this way. Typically negative pressure is what is recommended for sandwich layout cases like this or the Form T1 or the Ghost S1 that way you really are benefiting from all of that kind of air that's coming through the side panels and assisting the small fans on your graphics card. So starting off with CPU thermals here we have a new best result and by quite a big margin versus the Cooler Master NR200 the SSU mesh runs 7 degrees cooler for our test system here which uses a 10900K overclocked to 5GHz at 1.27V

 It's going to be released on Amazon and Newegg towards the start of next year at a very acceptable price point of around 100 to 120 US dollars. So again, I think this is going to be the mainstream ITX case to beat next year. Let's take a look at what you need to know. So first off, let's get a size comparison out of the way to see how big this thing really is

The 2021 ITX Case to Beat – SSUPD Meshlicious

 It explains everything. But that's not what this video is about. This video is about a brand new case from a brand new company, kind of. It's a spinoff company from Lee & Lee called SSUPD

 This panel pops off with the nice pushpin design, as do all the panels on this case, so it's really easy to get in and out. We also have a front panel that's all mesh, and here we have support for up to a 240 or a 280 millimeter radiator, which is not the type of liquid cooling support you typically find in the case that's just under 15 liters in volume. It's a nice metal frame as well, as you can see. On the left side, we have our only tempered glass panel, which you can buy replacement panels

 But I mean, if you're just trying to put one of these on your desk, save up some space, the Meshlicious is pretty damn impressive. I gotta say, I didn't know what to expect. And usually when I don't know what to expect from a product, I typically just don't expect much because let's face it, most products out there aren't super impressive, but this one is. The price is right, it fits a ton of hardware and it's compact as hell

 All right, here we go. Oh, yay, fans are spinning. Voila, let's take a look at the graphics card over here. That's also powered on

The BEST Mini ITX case I've seen in ages

 A killer in the right hands? Try it out for yourself on Xtify.com. Now at first I thought this was a brilliant design given the modularity of the riser cable but unfortunately the included riser cable is not long enough to reach the motherboard in the SFF mode so this option is unavailable out of the box. Also depending on the length of your SFF GPU front cooling compatibility will vary so if only the riser cable was three and a half centimeters longer this configuration would have been possible by default and I don't blame Subt for it because including that hard drive bracket of like that single piece of metal is probably no cost at all to them but including an additional riser cable would have been more expensive but I still wanted a slightly longer cable maybe by default so that you can utilize both vertical and horizontal GPU without needing to go and buy your own riser cable

 All the power supply options are awesome the fully modular GPU chamber both in height and width is pretty innovative and that whole front section is open for radiators and fans. The few small details I don't like all revolve around the tiny feet at the bottom when it comes to like routing your display cables that will bulge out underneath unless you raise that whole GPU mount. The riser cable is not long enough for the SFF mode and can we please get dual USB-A ports especially when we're using the full 19 pin connector anyway. Other than that I'm going to finish on the positive note this is a damn good case if you're looking for an ITX towering form factor that is both performance, compatibility focused, ease of use

 XtifyMZ1, Zai's rail. A unique project and a very unique mouse designed by RocketJump Ninja for better aim. After testing more than 250 mice Zai knew what a mouse needed for maximum aim potential but the shape did not exist. So he teamed up with Xtify, shaped his own mouse and loaded it with top tier components

The ALMOST Perfect ITX Case - SSUPD Meshlicious Review

 It literally just pops off with the same mechanism. Now to address the questions we're going to get, can you put the panels on opposite sides? If you wanted to optimize for GPU airflow, the answer is yes. Yes you can. So you can put these panels on either side

 What we're going to do, we're going to build, we're going to test the thermals, we're going to pull it apart and see what makes this thing tick and then we're going to tell you if this thing is any good. Yeah, I don't know what happened to my voice at the end, but yeah, anyway, before we pull this apart and see what makes it tick, I just want to address a few things that we're going to see in the comments. The first thing is it's going to be like, Oh, this case is copying another case made by another company. There's a pretty simple explanation for what you're seeing with this case

 Now Bindi is actually indicating where you would mount the radiator on this case. So you can do a 280 mil or a 240 mil with the bracket that's currently installed here is for 240 mil. We're going to be removing this because we are going to do 280 in this build. However, if you're going for the base version of this case, which I suspect some people might actually do this 119 us dollars at the time of filming, however, it's only available for pre-order

 I think that's how it's meant to be pronounced. The Meshlicious. What we're going to do, we're going to build, we're going to test the thermals, we're going to pull it apart and see what makes this thing tick and then we're going to tell you if this thing is any good. Yeah, I don't know what happened to my voice at the end, but yeah, anyway, before we pull this apart and see what makes it tick, I just want to address a few things that we're going to see in the comments

SSUPD Meshlicious: The 14.6L NR200 Destroyer?

 There are threaded holes underneath the rubber strips that serve as feet. To mount aftermarket feet, peel off the strips.  I'd also recommend using a liquid cooler for the CPU. That seems to be what most use in this case but it will accept certain air coolers as well

  Using aftermarket riser feet will help with airflow. The feet that come with the case are just rectangular rubber strips. I used Amazon ASIN B000TXZL4S. Reference Peavy Rubber Amplifier Feet

 It's a SFF case that gives up very little relative to medium and full size cases. Kudos to the engineers for their hard work and restraint when it comes to the exterior and interior design. It's a case that is easy to build in and even fun. The interior obviously had a lot of thought put into it and that pays off

  I'd also recommend using a liquid cooler for the CPU. That seems to be what most use in this case but it will accept certain air coolers as well. NZXT is a solid liquid cooler brand and what I used. Max radiator length for a liquid cooler is 280mm's

Superior design and materials, accepts full size GPU's up to 320mm's in length..

 Now the exterior of the meshalicious is just that, it's mesh. Unless you opt for the tempered glass, then it's mesh and glass. It's mesh-a-glash. Glashalicious

 You know, that sounds like something from like Star Trek, the SSUPD Enterprise, but is putting your tiny PC inside this little enclosure worth it? Well, we will investigate that question. Let's go! Lee & Lee has always been a company that has produced state-of-the-art PC cases with innovative designs, great airflow cases such as the Landcool 2 Mesh, and the new 011 Air Mini. Don't worry, we will be reviewing that one. And showcase cases like the 011 Dynamic XL, as well as standard-looking cases such as the Landcool 205

Lian Li A4-H2O vs SSUPD Meshlicious Mini-ITX

Reviews by Topic

Build Quality

Portability

Cooling

Compatibility

Materials

QUICK QUESTION!

You might also like