Hiking Boots/Shoes Recommendations?

Hiking boot recommendations?

Any recommendations for women's hiking shoes?

[Request] Hiking/outdoorsy style shoes that can handle lots of walking on concrete

Cold and wet weather hiking boots recommendations?

I am in need of a new pair of trail/hiking boots.

Hiking Boots for heavy use during the summer

Good pair of hiking shoes?

[Request] waterproof hiking shoes

[request] - Good quality walking shoes.

Hello Redditors. I'm in search of a classy yet extremely durable pair of hiking boots to take backpacking around the world for 12+ months with.

Hiking boots recommendations

Men's three season "urban hiker" (like Merrell MOAB but longer lasting)

BIFL Hiking boots for women

Hiking boots with good traction and can stand up to abuse.

Looking for a good pair of shoes for my weird feet

Request - Hiking Sandals

Request: Hiking Boots

Comfortable and cushiony shoes for walking on pavement 10KM/couple hours a day (UK)

Hiking sandals that last?

[Request] Powerful dishwasher with sanitize function?

I want the best god damned dishwasher money can buy.

Looking for the best, easiest to operate, cheapest dishwasher - Recommendation?

[Request] Best countertop dishwasher for reasonable price?

Can anyone recommend a good dishwasher?

Countertop/Portable Dishwasher

[Request] Dishwasher &lt;$1k Australian with QOL features and low water use

Dishwasher for Second Home

My friend bought a house with this KichenAid dishwasher from 1974. He says it works better than any of the other ones he has owned. He just has to convince his wife not to replace it.

What's a good Panel ready dishwasher under $1k?

Best socket set on the market $100-$150

[Request] Socket wrenches

I need a recommendation for a tool set that should last a lifetime. [Request]

Looking for a Mechanics tool set.

23 years later; GM Goodwrench socket set.

A Starter/Lifetime Tool set

Basic screwdriver set needed

Mechanic Tools that are BIFL

Trying to fill a tool roll for my truck and would like input on BFL tools like wrenches, pliers, socket sets, etc.

BIFL: Mastercraft ratchet set with lifetime warranty. Got it at 14, im 31. Went thru more abuse than you think!

Looking to upgrade my home hand tools

Was told to post this here. Husky 270pc toolset from Home Depot for $99, normally $199. Lifetime warranty too

[Request] Ratchet/Wrench/Etc tool set for home/bicycle/general use

Thoughts on a Honda Accord V6 2007?

2010 Honda Accord worth the buy?

Thoughts on a 2008 Honda accord v6 coupe EX-L?

2014 honda accord ??

After an initial round of research it seems like Honda Accord Hybrid is the right answer, but I want to pressure test that with you guys

2014 Accord V6 Touring (any thoughts?)

Which car ?

me again. 2010 2dr honda accord, 122k miles for $5,800. just want a reliable first car, thoughts?

Want to buy an Accord, any suggestions?

2020/2021 Honda Accord LX - Tell Me About Your Likes/Dislikes

Compact - Midsize suv

best small/midsize suv?

Looking for a used (06-14) reliable compact/mid-size SUV

compact/mid size suv

Midsize SUV

Recommendations for midsized SUVs to look at

Compact to Mid-Size SUV

Small to mid-size suv suggestions?

Midsize vehicle for three kids

Mid-Size SUV

Just tried a Lotus Elise Cup 250, driving impressions !

Dan Neil reviews Lotus Emira: As Good As It Gets

Considering a Lotus Elise - USA

How affordable are Lotus Elises from the 2005-2012 model year?

Lotus Exige Sport Final Edition review: farewell, Exige

I wanna know everything you know about a 2005 Lotus Elise

My Lotus Evora Review

Lotus retail sales up 24% in best performance for a decade

2022 Lotus Emira Looks to Be One of the Brand's Best

PURCHASING A LOTUS — Need Tips + Advice.

Looking for a good rpg/action adventure with a good story and good characters

Deep long rpgs?

Looking for a story-focused RPG

Looking for a complex RPG

Fantasy games with an detailed and immersive world?

[WSIB] I am in search for a open world RPG that will keep me busy for hundreds of hours.

Open world game with huge map, lots of things to do, and great graphics

WSIB Feeling a bit of an rpg lull and want something exciting like old school BioWare with a engaging story that doesn’t take 100 hours to play.

WSIB: long, immersive games with high quality storytelling and writing

looking for an open-world rpg

[WSIB] A turn based strategy game that isn’t 4X

Turn-based strategy game

Turn-based strategy games

[WSIB] Small-scale, medieval, strategy game, featuring pikemen and cavalry

(WSIB) Turn-based ”wargaming” game

[WSIB] Turn Based Strategy games

WSIB if I want a strategy game for dummies

WSIB Strategic Rpg

[WSIB] Good offline strategy/(ish) games?

What are some good "smaller scale to control, but still feel large scale battle" tactical / strategy games?

Bullet Hell-Type Games: Atomicrops vs. I, Dracula: Genesis vs. Others?

WSIB if i want a completely story driven indie game but have already played undertale and oneshot (preferably similar to those 2)

Post apocalyptic enthusiast, Underrail or Atom RPG?

[SIB] Undermine or Atomicrops

WSIB if I like "Run into things, need to grow in power/special items to move further so I come back after unlocking said element" type of games.

Blsoodborne or Resident evil 2 ?

What should I buy? Animal Crossing: New Horizons or Doom: Eternal

[WSIB] Fast-paced top-down roguelikes?

[SIB] I Hate Running Backwards or Planetary Dustoff? Or something else?

SIB Nuclear Throne?

What can you recommend for minimizing pores?

I know you can’t get rid of pores but I’m wondering is there anyway to make them smaller? I use La Roche Posay products. They keep my acne mostly at bay but I feel like my pores are just so large. Part of it is genetic, but just wondering if there’s anything else I can do at home to help. Thanks!

OPEN PORES- WHAT TO DO? IS THERE ANY PRODUCT I CAN USE?

What skincare products have you used that helped with large pores?

What is the best thing to use to tighten pores on your face?

Can anyone tell me why my pores are so huge and what I can do to minimize them?

How to reduce pores.

Hey guys, how do I make my pores not look like this? Info in comments (deleted and reposted for an error in the title)

Pores reduction tips?

Advice for shrinking pores on and around nose?

[sun care] sunscreen that doesn’t irritate rosacea and perioral dermatitis

[Sun Care] Looking for sunscreen that doesn't irritate Rosacea

Sunscreen recommendations for rosacea

Looking for a sunscreen for my acne prone skin.

[Sun Care] looking for a sunscreen that works well for people with Eczema.

Desperate for a good sunscreen

Looking for a Daily Suncreen

I’ve tried them all and I still can’t find my holy grail for my dry rosacea skin. Any other recommendations?

Sunscreen, eczema and makeup, Help [Sun care]

[Sun Care] Help with not being able to use Sunscreen

How can i stop a really greasy face?

How to best defeat oily skin?

Is there any long-lasting solution for oily face?

Oily Face -&gt; Wash Face -&gt; More Oily

Extremely oily skin

Y’all know some sort of cream or product I can buy to make my face less greasy looking?

super oily face help needed

Oily Skin— please help!

Really oily skin

How to have less oily skin?

Adrian Krebs

Johannes Engler

Tavis Lochhead

The A4-H2O is an 11-liter small form factor case, a collaboration project with DAN Cases. Based on the original DAN A4-SFX case sandwich layout concept, the A4-H2O continues the minimalist and compact form factor with improved hardware compatibility (including AIO water cooling) and simplifies installation

amazon.com

pcmag.com

Gear Seekers

Christopher Flannigan

PCWorld

Optimum Tech

Hardware Canucks

r/sffpc

Lian Li A4 H2O gets my seal of approval 👍. Good build quality, easy to work with, not too big, good pricing (with pcie 4.0 cable included), no major flaws unlike all other ITX cases that i have used so far.

Lian Li A4 H20 without the H2O

The media could not be loaded. Overall this case is really well made. Best part is it fits in my backpack for carry on flights. Aio fitment is a bit of a challenge but so far the NZXT x53 cracken and Corsair H100i Capellix fit when tubes are routed over ram and under power supply (in picture

Quality metals and Paint.

 So the cooler I have with the tube length that I have, I prefer doing it the other way for the routing towards the bottom because that way it didn't kink the tubes quite so hard. For a graphics card of this size, unfortunately, for it to fit, I did have to change how I routed those tubes and you can kind of see it here that it's a little bit like, which I don't prefer, but to make this work, that's what you have to do. Something to keep in mind, everybody is going to have a little bit of a different experience with that because how you mount the water block, the exact length of the tubes varies a little bit from all-in-one cooler to all-in-one cooler. This particular Corsair model that I have happened to work out this way

 Something to keep in mind, everybody is going to have a little bit of a different experience with that because how you mount the water block, the exact length of the tubes varies a little bit from all-in-one cooler to all-in-one cooler. This particular Corsair model that I have happened to work out this way. So did that, got this in the front door, everything fits, although, you know, as you can also see at the bottom of the case here, I will have some little finishing to do, shall we say, with these stiff braided cables that I was mentioning, again, like I said earlier, softer braided cables are likely the best way to go with this case, in my opinion. But to get to the main part of the story, I am digressing here a little bit, is that it's this width here, the height of the car, that's the problem because originally I tried the 6800 XT and this particular Asus TUF gaming model has this, shall we call it, protrusion on the fan shroud here, looks very cool, you know, makes it look real tough, but because of that extra width, I could not, for love or money, get this card into this case and you can see from the battle scars right here that I tried, oh my friends, let me tell you, I tried so hard to get this card into this case, like I tried wiggling through the front door, or sorry, the front panel opening, I tried, you know, maneuvering it like this way and like trying to squish it back this way, I even took out the riser cable, unmounted that, plugged it in, plugged this into the riser cable's PCIe slot first so I could, with the hope that maybe I could kind of wiggle it in, get it down and then like remount the riser cable because my biggest problem was like trying to get enough maneuvering room in here so I could actually sit this card into that slot, nothing worked, I eventually had to admit defeat, it was a sad, bitter moment for me

 You've got the silver, as you see here, and then you have an all black variant as well. These cases, or this case I should say, are made out of aluminum panels on the outside and then you've got a steel chassis on the inside. For dimensions, you're looking at 326 millimeters in length, 140 millimeters in width, and 240 millimeters in height. In freedom units, Merica, that is 2

 So did that, got this in the front door, everything fits, although, you know, as you can also see at the bottom of the case here, I will have some little finishing to do, shall we say, with these stiff braided cables that I was mentioning, again, like I said earlier, softer braided cables are likely the best way to go with this case, in my opinion. But to get to the main part of the story, I am digressing here a little bit, is that it's this width here, the height of the car, that's the problem because originally I tried the 6800 XT and this particular Asus TUF gaming model has this, shall we call it, protrusion on the fan shroud here, looks very cool, you know, makes it look real tough, but because of that extra width, I could not, for love or money, get this card into this case and you can see from the battle scars right here that I tried, oh my friends, let me tell you, I tried so hard to get this card into this case, like I tried wiggling through the front door, or sorry, the front panel opening, I tried, you know, maneuvering it like this way and like trying to squish it back this way, I even took out the riser cable, unmounted that, plugged it in, plugged this into the riser cable's PCIe slot first so I could, with the hope that maybe I could kind of wiggle it in, get it down and then like remount the riser cable because my biggest problem was like trying to get enough maneuvering room in here so I could actually sit this card into that slot, nothing worked, I eventually had to admit defeat, it was a sad, bitter moment for me. So when you are picking a card and if you are going to be looking at cards of this kind of heft, definitely pay attention to these kind of details about how much room it takes height wise because you are going to be looking at a thick card regardless so that already reduces your maneuverability so don't make it even harder for yourself or impossible because you've also taken off what remaining space you have to wiggle things around. So the best summary for this case is actually something that my past self left in a note to my current self and I'm just going to quote it directly

Lian Li x Dan A4-H20 Tour & Build Thoughts After Over A Month Of Use

 So let's talk about the good. The case is extremely easy to handle. All of the exterior panels are toolless with those Lian Li pushpins and thumb screws at the back. And everything that is attached to the frame has the same screw, avoiding any confusion when it comes to building the case back together

 And the side panels are not a significant barrier, as you can see. On the GPU side, it is also very well controlled because of the exhaust. So no heat gets trapped inside that GPU chamber. And this is really impressive because the case is tiny and all the cooling is achieved with those two 120 millimeter fans

SO CLOSE to Perfect - Lian Li x DAN A4-H20 Review

 And I think the timing here is absolutely perfect. There is no other case right now that can fit these components in this size. The NCase M one is a little bit bigger, and the Form T one is a little bit smaller, but both are just unavailable. The new A4 H20 fits right in between those two legendary ITX cases, both in terms of size and hardware compatibility, but it's quite a bit cheaper and will actually be available to buy

 Now as a point of reference when we drop in the RTX 2070 Super Founder's Edition and compare that to the rest of our test data, performance is pretty good overall. It's two degrees better than the Form T1 when both cases are running a top-mounted 240mm AIO, and only a few degrees warmer than one of the highest airflow mid-towers that you can buy at the moment. All in all, it's about the kind of GPU thermals that you'd expect coming from a Dan case of this size, and all of the cases that it's beaten by on this list are in fact larger cases, so do keep that in mind. As for current Founder's Edition cards like the RTX 3080, that would also be a good pairing here for the A4 H2O, but you would need to install the included standoffs for the riser cable

 So overall, pretty impressed, and I would say that this is one of the best ITX cases that you can buy at the moment, alongside the Meshlicious and the NR200P Max. Those are slightly bigger cases, in some people's eyes they are considerably larger cases, but this is as small as I would recommend going if you're also considering the sizes and the thermal constraints of modern hardware. So if you're considering a three slot GPU, if you're considering an i7, this is about as small as I would recommend going. I would especially recommend this case if you're not going super crazy with your components, so 12600K, RTX 3070, that would run pretty much perfect here in my opinion, and up to a 3080, 6800 XT would also be fine, but there you definitely want to go with a big cooler design and maybe even consider undervolting

 And to be honest, I think this is about as small as you can make a PC case today, while still retaining the full hardware compatibility and thermal performance of modern high-end components. We're talking huge 3-slot graphics cards and support for 240mm liquid coolers, all in a PC case this small. And I think the timing here is absolutely perfect. There is no other case right now that can fit these components in this size

Tiny Case with Perfect Fitment – Dan A4-H2O

5-by-12.8-inch patch on your desk. The box has a similarly diminutive under-10-inch height. The biggest surprise, though: This Mini-ITX chassis lets you pack some very serious componentry in a seriously small space

Mind you, we won&rsquo;t be blaming Corsair for having noisy fans, as most people won&rsquo;t be using this case with an overclocked processor in our extreme test conditions: while running Prime95 small-FFTs and FurMark simultaneously. These particular fans are also known for winding down nicely when less-stressed systems are configured with automatic fan control. This is just a (very) worst case scenario.

But get the right mix, and this chassis will vie with the Streacom DA2 V2 as one of our favorite Mini-ITX chassis for tricked-out builds. And it won't cost you half of what the DA2 V2 will.

 The $35 difference between these cable options is hardly marginal on a case model that has a US base price of $120, so you'll want to be sure you really need the 4. (We will be expanding our testing pool in coming months.) So, for now, we tested the A4-H2O against itself in closed-panel and open-panel configurations to see how well it would contain noise and let out heat.

Lian Li A4-H2O Review

 Moving on to the things I liked about the case I think the first thing was the design I think this looks great and as we've already mentioned it was really straightforward to build in. And in terms of build quality it was excellent I think the all aluminium panels work very well and it really felt like you were building in a premium case. Just how all the panels came off how everything was compartmentized and how everything was designed to go together felt really really premium and I really enjoyed building in the case. I don't want to list all the cases featured again but the two main features I thought worked really well in this case one was the radiator cover hiding everything away and the other thing I really liked was the large cutout at the front which meant you were actually able to install a GPU that was too big to fit through the cutout at the side

99. The A4 HTO features four removable aluminium panels, the one on the top is 2mm thick, while the ones on the side and the front are 1.5mm thick. Taking a look at the case's front AIO, we've got a single USB type A and single USB type C connector, we've got separate headphone and microphone jacks and a power button

 Just how all the panels came off how everything was compartmentized and how everything was designed to go together felt really really premium and I really enjoyed building in the case. I don't want to list all the cases featured again but the two main features I thought worked really well in this case one was the radiator cover hiding everything away and the other thing I really liked was the large cutout at the front which meant you were actually able to install a GPU that was too big to fit through the cutout at the side. So this feature I think in particular was absolutely brilliant. Moving on to things I didn't like about the case and there's very little to say here but there is two features I do think it's important that I point out

Lian Li | DAN A4-H2O Review

This filter kit is designed to fit the Sliger SM560 computer case.

DEMCiflex Computer Air Filters fits by way of a magnetic frame that is part of its structural design. This would adhere directly to the case and in the event that the case is non-ferrous (it has no iron in it's composition so that a magnet is not attracted to it) we supply you with a peel and stick magnetic frame (optional extra) that is fitted onto your PC case, around the air intake area. DEMCiflex Dust Filter will attach to this frame, making it easy to remove and clean when necessary. The mesh used for filtering is a very durable high precision medical grade mesh.

The mesh that acts as filter will separate dust and debris from the cooling air without adversely affecting or restricting the air flow.

DEMCiflex filter thickness(height) is less than 2mm (1.9mm approx) and if combined with the extra magnet for non-ferrous surfaces it is less than 2.5mm(2.4mm approx).

This thickness stays the same regardless of the size of the filter.

Filter material is approx. 0.1mm thick.

Filter Dimensions:

Top: 293mm x 118mm
Bottom: 241mm x 133mm
Side: 263mm x 185mm
Side: 263mm x 185mm



Model: DF1072

andydjangoo

 It's like the P600S had a little baby, an ITX baby. The overall build quality is superb. The outside panels are made of aluminium which gives this case a good weight to it and feels structurally robust. The only weak parts I can find is the plastic perforated top side and the window panels as they both easily flex

 There'll be links to all of them down below in the video description so check them out. Okay, let's get building! So building into this case was relatively easy although cable management is incredibly tricky as with any small case. Some of the cables were so long I had to stuff them in the front compartment next to the SSD drives and I also had to tie a bunch of these cables inside the case so they won't touch the fans at the bottom. Now for the thermals I did four different tests based on the configuration of the case's side panels

 That's 335 millimeters in length, 159 in width and 208 in height. There are actually four different models in the SM series from Sligar. They range from a short and slim case which can fit a two slot GPU to a tall and wider case that can fit a three slot GPU with either a radiator and fans or multiple hard drives at the top. The one I have is in between these versions, a case that can fit a three slot GPU but with no space for a radiator or fans or hard drives at the top

 It's probably because the placement of the exhaust fans is in favor of the GPU and that the GPU's fan is really efficient so clearly it's best to use the vented panels as temperatures start to rise when you use the window panels especially when it's used for the CPU and if you really want to use a window panel for the CPU I would go for an AIO configuration and here is a test I did for four different games using only the vented panels just so you know what to expect if you plan to play your favorite games with this case using a similar configuration. I really like this case personally this is one of my favorite looking ITX cases out there although I would have liked if they had made this version slightly taller just tall enough to fit another set of fans on top so the intake would be at the bottom and the exhaust at the top for better airflow. I know you can probably go for the SM570 which is the model up that has room for a 240 millimeter radiator and fans but personally I prefer an air cooled system over AIO systems and to have a case that would fit a set of fans only at the top would aesthetically look more pleasing to me in terms of case design so that's the Slager SM560 guys. Let me know what you think in the comments below and be sure to like this video if you liked it, subscribe if you haven't already and all the parts featured in this review will be linked in the video description below

the BEST ITX PC CASE 2019? - Sliger SM560

I have the sm560 and it's a great case though my gigabyte and zotac 3080 cards couldn't quite fit by just a hair. The vrm requirements of the newest processors seems to be limiting the with the itx boards coming out and atx is looking more and more inevitable. An matx version of this would be interesting to see how small it could be as well. The hdd compatibility is some of the best in sff with this

Sliger - New Case - console style for ATX motherboards, looking for feedback and questions!

Of all of the sff cases I’ve had the pleasure or building in (Ncase m1, sliger 560, and node 202) I would say most of the cost is in quality of life improvements. (I speak from perspective of a user. The cost is largely due to small manufacturing runs the smaller companies do) The premium cases were really the only options reasonable for highest power parts as well.

With mainstream brands moving into the SFFPC market, what am I getting for paying the "ITX Tax" for these niche models when I can get a NR200 for 79$? 

Now I'm not that into the Nr200 design but I'm not really sure what I'm paying for in this premium cases besides slightly better build quality.

<div class="md"><p>With mainstream brands moving into the SFFPC market, what am I getting for paying the &quot;ITX Tax&quot; for these niche models when I can get a NR200 for 79$? </p>

<p>Now I&#39;m not that into the Nr200 design but I&#39;m not really sure what I&#39;m paying for in this premium cases besides slightly better build quality.</p>
</div>

What am I getting for paying for a Premium case 200$+? (NCASE,SLIGER,DANCASE, GHOST S1)

walmart

Lian Li A4-H2O vs Sliger SM560

Reviews by Topic

Build Quality

Cooling

QUICK QUESTION!

You might also like