Hiking Boots/Shoes Recommendations?

Hiking boot recommendations?

Any recommendations for women's hiking shoes?

[Request] Hiking/outdoorsy style shoes that can handle lots of walking on concrete

Cold and wet weather hiking boots recommendations?

I am in need of a new pair of trail/hiking boots.

Hiking Boots for heavy use during the summer

Good pair of hiking shoes?

[Request] waterproof hiking shoes

[request] - Good quality walking shoes.

Hello Redditors. I'm in search of a classy yet extremely durable pair of hiking boots to take backpacking around the world for 12+ months with.

Hiking boots recommendations

Men's three season "urban hiker" (like Merrell MOAB but longer lasting)

BIFL Hiking boots for women

Hiking boots with good traction and can stand up to abuse.

Looking for a good pair of shoes for my weird feet

Request - Hiking Sandals

Request: Hiking Boots

Comfortable and cushiony shoes for walking on pavement 10KM/couple hours a day (UK)

Hiking sandals that last?

[Request] Powerful dishwasher with sanitize function?

I want the best god damned dishwasher money can buy.

Looking for the best, easiest to operate, cheapest dishwasher - Recommendation?

[Request] Best countertop dishwasher for reasonable price?

Can anyone recommend a good dishwasher?

Countertop/Portable Dishwasher

[Request] Dishwasher &lt;$1k Australian with QOL features and low water use

Dishwasher for Second Home

My friend bought a house with this KichenAid dishwasher from 1974. He says it works better than any of the other ones he has owned. He just has to convince his wife not to replace it.

What's a good Panel ready dishwasher under $1k?

Best socket set on the market $100-$150

[Request] Socket wrenches

I need a recommendation for a tool set that should last a lifetime. [Request]

Looking for a Mechanics tool set.

23 years later; GM Goodwrench socket set.

A Starter/Lifetime Tool set

Basic screwdriver set needed

Mechanic Tools that are BIFL

Trying to fill a tool roll for my truck and would like input on BFL tools like wrenches, pliers, socket sets, etc.

BIFL: Mastercraft ratchet set with lifetime warranty. Got it at 14, im 31. Went thru more abuse than you think!

Looking to upgrade my home hand tools

Was told to post this here. Husky 270pc toolset from Home Depot for $99, normally $199. Lifetime warranty too

[Request] Ratchet/Wrench/Etc tool set for home/bicycle/general use

Thoughts on a Honda Accord V6 2007?

2010 Honda Accord worth the buy?

Thoughts on a 2008 Honda accord v6 coupe EX-L?

2014 honda accord ??

After an initial round of research it seems like Honda Accord Hybrid is the right answer, but I want to pressure test that with you guys

2014 Accord V6 Touring (any thoughts?)

Which car ?

me again. 2010 2dr honda accord, 122k miles for $5,800. just want a reliable first car, thoughts?

Want to buy an Accord, any suggestions?

2020/2021 Honda Accord LX - Tell Me About Your Likes/Dislikes

Compact - Midsize suv

best small/midsize suv?

Looking for a used (06-14) reliable compact/mid-size SUV

compact/mid size suv

Midsize SUV

Recommendations for midsized SUVs to look at

Compact to Mid-Size SUV

Small to mid-size suv suggestions?

Midsize vehicle for three kids

Mid-Size SUV

Just tried a Lotus Elise Cup 250, driving impressions !

Dan Neil reviews Lotus Emira: As Good As It Gets

Considering a Lotus Elise - USA

How affordable are Lotus Elises from the 2005-2012 model year?

Lotus Exige Sport Final Edition review: farewell, Exige

I wanna know everything you know about a 2005 Lotus Elise

My Lotus Evora Review

Lotus retail sales up 24% in best performance for a decade

2022 Lotus Emira Looks to Be One of the Brand's Best

PURCHASING A LOTUS — Need Tips + Advice.

Looking for a good rpg/action adventure with a good story and good characters

Deep long rpgs?

Looking for a story-focused RPG

Looking for a complex RPG

Fantasy games with an detailed and immersive world?

[WSIB] I am in search for a open world RPG that will keep me busy for hundreds of hours.

Open world game with huge map, lots of things to do, and great graphics

WSIB Feeling a bit of an rpg lull and want something exciting like old school BioWare with a engaging story that doesn’t take 100 hours to play.

WSIB: long, immersive games with high quality storytelling and writing

looking for an open-world rpg

[WSIB] A turn based strategy game that isn’t 4X

Turn-based strategy game

Turn-based strategy games

[WSIB] Small-scale, medieval, strategy game, featuring pikemen and cavalry

(WSIB) Turn-based ”wargaming” game

[WSIB] Turn Based Strategy games

WSIB if I want a strategy game for dummies

WSIB Strategic Rpg

[WSIB] Good offline strategy/(ish) games?

What are some good "smaller scale to control, but still feel large scale battle" tactical / strategy games?

Bullet Hell-Type Games: Atomicrops vs. I, Dracula: Genesis vs. Others?

WSIB if i want a completely story driven indie game but have already played undertale and oneshot (preferably similar to those 2)

Post apocalyptic enthusiast, Underrail or Atom RPG?

[SIB] Undermine or Atomicrops

WSIB if I like "Run into things, need to grow in power/special items to move further so I come back after unlocking said element" type of games.

Blsoodborne or Resident evil 2 ?

What should I buy? Animal Crossing: New Horizons or Doom: Eternal

[WSIB] Fast-paced top-down roguelikes?

[SIB] I Hate Running Backwards or Planetary Dustoff? Or something else?

SIB Nuclear Throne?

What can you recommend for minimizing pores?

I know you can’t get rid of pores but I’m wondering is there anyway to make them smaller? I use La Roche Posay products. They keep my acne mostly at bay but I feel like my pores are just so large. Part of it is genetic, but just wondering if there’s anything else I can do at home to help. Thanks!

OPEN PORES- WHAT TO DO? IS THERE ANY PRODUCT I CAN USE?

What skincare products have you used that helped with large pores?

What is the best thing to use to tighten pores on your face?

Can anyone tell me why my pores are so huge and what I can do to minimize them?

How to reduce pores.

Hey guys, how do I make my pores not look like this? Info in comments (deleted and reposted for an error in the title)

Pores reduction tips?

Advice for shrinking pores on and around nose?

[sun care] sunscreen that doesn’t irritate rosacea and perioral dermatitis

[Sun Care] Looking for sunscreen that doesn't irritate Rosacea

Sunscreen recommendations for rosacea

Looking for a sunscreen for my acne prone skin.

[Sun Care] looking for a sunscreen that works well for people with Eczema.

Desperate for a good sunscreen

Looking for a Daily Suncreen

I’ve tried them all and I still can’t find my holy grail for my dry rosacea skin. Any other recommendations?

Sunscreen, eczema and makeup, Help [Sun care]

[Sun Care] Help with not being able to use Sunscreen

How can i stop a really greasy face?

How to best defeat oily skin?

Is there any long-lasting solution for oily face?

Oily Face -&gt; Wash Face -&gt; More Oily

Extremely oily skin

Y’all know some sort of cream or product I can buy to make my face less greasy looking?

super oily face help needed

Oily Skin— please help!

Really oily skin

How to have less oily skin?

Adrian Krebs

Johannes Engler

Tavis Lochhead

amazon.com

Rise 3D Printing

Make and Remake

My Tech Fun

The Edge of Tech

Nathan Builds Robots

Beanie's Hobbies 3D Printing

Hoffman Engineering

 It's a cantilever design, which means it has one Z-axis and the X gantry rides straight off of that, like this. The extra mounting bracket down here makes sure that it can hold that gantry up and support plenty of weight. The standard Creality hotend makes it easy to work on and upgrade. It has belt tensioners on the X and Y, which makes it super easy to adjust your belt tension

 I think it might just take the cake. Let's find out why. The Ender 2 Pro is a breeze to set up with only four steps to assemble it. It is going to be great for beginners and if you've had a 3D printer before, there's only a total of seven bolts needed to assemble this, so it might be the easiest printer you've ever put together

 The Ender 2 Pro is a breeze to set up with only four steps to assemble it. It is going to be great for beginners and if you've had a 3D printer before, there's only a total of seven bolts needed to assemble this, so it might be the easiest printer you've ever put together. It's a cantilever design, which means it has one Z-axis and the X gantry rides straight off of that, like this. The extra mounting bracket down here makes sure that it can hold that gantry up and support plenty of weight

 All of this looks great on paper, but let's take a quick look at a couple prints I got off the Ender 2 Pro. This is the conical flask in vase mode by clock spring. It's printed in atomic filament and came out great. This mini gym by Wexter was also printed in that atomic indigo golden sparkle filament, and it came out virtually perfect

Could the Ender 2 Pro Be The  Best 3D Printer UNDER $200?

 It's meant to be picked up and moved around. They've combined it with the handle When not in use you can take unload your filament and the arm will fold in for better storage It has a lot of good options to it But there were a few things that I felt fell short on this printer too, and I want to point those out Especially for the price point looking at the price point 170 and Ender 3 Pro is about 190 So roughly 200 so not much more for a lot more build area and a lot more machine This machine You have about half the build plate Which is great, but there were some things I felt Crowdy probably could have done better with this one that now I'm gonna have to upgrade and I want to point those out First part that I want to point out. Everything looks kind of good on that end And we'll get this guy screwed back in And I do love that they gave this kind of some swing that that's kind of a nice thing because I can swing it and put the Condensed the printer for better storage So that is a nice feature So wiring all looks good So now we got to wire in this guy so we'll get the control panel We'll get him plugged in and We'll pull that tape back We'll get this guy in his slots We'll slot him home All right, so that's looking good Got it good and connected And now at this point it's adjustment so We're done with the instruction book. We're actually going to get this guy powered on We're going to power them on for a little bit make sure everything looks right then I am going to set this guy aside so Um, the reason why i'm going to set it aside is one i'm going to plan on doing a hey We used it video But two I I'm not going to use this I see a tangled horrible mess right here and I don't have a normal spool up here because my expectation From creality was the half spool that we would normally get with an ender three or cr-10 and we didn't get that so I'm going to be uh Have to wait to actually power her on And I don't see a switch for voltage A lot of times I would expect to see a 115 or a 230 volt switch I don't see that on that this machine

 I had a lot of fun with it, especially doing small parts and things like that That's why this guy has been kept around in my shop for so long. It's when I have print jobs with itty-bitty parts and and lots of them I don't have to tie up a big printer to print a small piece That's where a small build plate comes in place but also if you're doing small stuff like Just small figurine vases stuff like that and you don't have a lot of room and you need something that's portable and easy to put Away the Ender 2 Pro is definitely a fit for you And especially when it comes into the cost of looking at like a Prusa or something like that This guy's price point is right around 170 bucks, which is not a bad price point It's well contained. It's meant to be picked up and moved around. They've combined it with the handle When not in use you can take unload your filament and the arm will fold in for better storage It has a lot of good options to it But there were a few things that I felt fell short on this printer too, and I want to point those out Especially for the price point looking at the price point 170 and Ender 3 Pro is about 190 So roughly 200 so not much more for a lot more build area and a lot more machine This machine You have about half the build plate Which is great, but there were some things I felt Crowdy probably could have done better with this one that now I'm gonna have to upgrade and I want to point those out First part that I want to point out

 Are you looking for a small FDM printer looking around looking at Prusa and all that well today I'm gonna talk about Creality's latest release the Ender 2 Pro. So join me inside Hey guys welcome to today's video as I said, we are looking at Creality's Ender 2 Pro this guy is a smaller printer than the Ender 3 and And it's a remake of an older one So the Ender 2 has been out for a long time a matter of fact It's hard to even find the parts for it anymore because it's just been it's not made anymore And that's this guy right here. So this is my Ender 2 heavily modded I actually came by this one secondhand, but it's a great little fantastic printer a small build plate Especially if you're wanting to do small stuff. Well Creality turned around and this year released the Pro version All of a sudden we're back to it to the small printer now we release this in competition to the Ender 3 which is a bit bigger and not as mobile as This printer it can be so one thing I'm going to talk about is if you're curious about the assembly check out my stream Because we did it live, but also I want to talk about pros and cons of this printer What I felt was great about it what I felt was wrong about it So this is actually the review now that I've used it for a week or so and kind of done some prints with it So I want to take a look at it and give you guys some true information that I think is relevant when you're considering your purchase If you guys are interested in this now one of the things to keep in mind that build platform

 This isn't going to work. This is going to be too small but if you're doing small prints like Some of the pokemon figures and stuff like that. You can still print a very tall narrow item So kind of keep that in mind uh As you kind of work through this one, it does kind of allow you to uh Uh to have some kind of cool fun stuff But definitely a good one. You can pick these up at micro center Uh, they did have them on amazon and of course the creality sites are out there Um, if there is an amazon link i'll put it in the description in the morning Um, some of them have not this guy has not been on amazon at least where you can catch him

3D Printer Ender 2 Pro Review

 Either way, I have to return it, as I don't want to have to start replacing parts on it weeks after purchase.

Bowden tube clogs immediately during each print

 We printed this bendy moveable slug and it came out absolutely fine, all the joints move, bends, twists, turns, an actual really good quality print. Ok then I went and printed this vase type bowl, fruit bowl type thing. This suffered from a little tiny bit of stringing here and there, I don't even know if you can see it, you might be able to see it. You just see some bit of stringing down here but you know, hold a lighter, something like that or just run your fingers over it or come straight off and as you can see the quality of this print is absolutely fantastic

 Also knocked off a bearing, now sometimes printers will struggle to print these, they'll print them but then they won't spin but as you can see with this one it will spin and turn and move just fine. It's a little bit tight because like a fool I printed it with a brim so a bit of the brim is still stuck here on the bottom which is obviously hindering the movement but if you didn't print it with a brim it would be absolutely fine. I mean I haven't done anything with the slicing program, I mean I'm just using Cura, running it on the Ender 2 profile, I haven't tweaked it or anything at all so with a little bit of tweaking the print quality from this thing would be absolutely amazing but I am so impressed with how this thing is printing, I mean it was £120 over here in the UK which for a 3D printer is actually quite cheap. Yes I know you've not exactly got the biggest bill plate but for printing smaller things it's absolutely ideal

 And that is the only issue I had because this thing was wobbling a lot but now it's stable. So that is the only issue that I have had with this printer. Apart from that it's been absolutely perfect and it has been an absolute joy to use. So remember guys, if you want 10% off this printer, 10% off the Krality Ender 3 S1 or the Krality CR-10 Pro Smart, then head over to Technology Outlet, the link will be down in the description below

 Apart from that it's been absolutely perfect and it has been an absolute joy to use. So remember guys, if you want 10% off this printer, 10% off the Krality Ender 3 S1 or the Krality CR-10 Pro Smart, then head over to Technology Outlet, the link will be down in the description below. Use my discount code BEANIE10 and you can then get 10% off any of those three printers. I highly recommend this printer for the sake of, I'm sure it's £120-129, obviously you'll get 10% off that as well but I can't fault this thing in any way shape or form

Creality Ender 2 Pro Test Prints (Amazing Budget Printer)

 As long as you can remember to disable the power loss detection before a spiral-based mode prints, the Ender-2 Pro can easily handle any small to medium sized prints you can throw at it. Thank you all for watching this review of the Ender-2 Pro. If you have any specific questions about the machine, leave them in the comments below and I'd be happy to answer them. And thank you Creality3D

 This pint-sized 3D printer is only $170 US dollars, but does it have the power to print above its weight class? Let's find out. As always, a disclaimer before I begin. I was sent this Ender 2 Pro for review by Creality3D.shop, an online distributor of Creality 3D printers

Can a $169 3D printer be Good? - Ender-2 Pro Review

shopify

The Original Prusa i3 MK3S+ is the latest version of our award-winning 3D printers. We have upgraded the MK3S with a brand new SuperPINDA probe for improved first layer calibration, added high-quality Misumi bearings and various useful design tweaks to make the printer easier to assemble and maintain. The MK3S+ includes all the proven features of the previous models, including the heatbed with removable PEI spring steel print sheets, automatic Mesh Bed Leveling, filament sensor, power loss recovery (power panic) and safety features. And it is still as silent as ever.

Wirecutter

This model offers the reliability and quality of a Prusa printer plus the largest print volume available.

tom's Hardware

Considered the best 3D printer overall by many aficionados, the Prusa MK3S+ has received countless industry accolades and awards, and with good reason. The MK3S+ is a powerhouse 3D printer that combines reliable hardware, feature-rich software, and a support channel that makes the Prusa signature black and orange hardware a common sight in 3D printing farms. The MK3S+ is based on the i3 platform and has benefitted from several generations of incremental upgrades which have resulted in one of the best 3D printers on the market.
Silent stepper drivers, removable textured build platforms, automatic bed leveling probe and more; the list of features that come stock on the Prusa MK3S+ is certainly impressive, but that&rsquo;s only part of the story with the MK3S+. Prusa has developed their own slicer app, PrusaSlicer, for processing 3D models and is actively adding new features requested by the community. Features like the ability to paint-on support material, create variable layer heights and generate custom printer profiles are examples of how PrusaSlicer enables the MK3S+ to leap ahead of the competition.
At a price point of $999 for an assembled printer and $749 for a DIY kit, the MK3S+ is one of the most expensive machines on this list. That price may raise some eyebrows among 3D printing enthusiasts who have become accustomed to printers in the sub-$300 price range, but for power users who need uncompromising performance and industry-leading documentation and support, the MK3S+ is at the top of the list. 
More: Prusa MK3S+ 3D Printer Review

TechGearLab

If you desire the best of the best when it comes to filament-based 3D printers, we highly recommend the Prusa i3 MK3S+. This printer delivered some exceptional test prints and is one of the easiest options to use. It is a very capable printer with a wide range of different compatible filaments, upgrade options, and a moderately large build area. There is also a plethora of instructional material available on the manufacturer's website. 
Unsurprisingly, this printer's price tag matches its quality — it's pricey. Additionally, it's sometimes only available from a limited number of vendors and is often coupled with substantial shipping or import fees, increasing an already considerable price tag. However, we highly recommend this printer to anyone seeking a premium product without making the jump to an industrial or professional printer. 
Read more: Prusa i3 MK3S+ review

pcmag.com

Aurora Tech

Total 3D Printing

OUT OF DARTS

r/3Dprinting

r/prusa3d

r/ErgoMechKeyboards

Filaments PLA and PETG are the easiest to use for beginners. PETG is more durable than PLA for the most part so try that.

I repair old electronics for fun, but I find broken parts often. I'd like to know a material type and printer that could print strong replacements pieces. For example, I have a Dreamcast controller with two broken triggers, if I could print replacements, that would be awesome.

Thank you.

<div class="md">I repair old electronics for fun, but I find broken parts often. I&#39;d like to know a material type and printer that could print strong replacements pieces. For example, I have a Dreamcast controller with two broken triggers, if I could print replacements, that would be awesome.

Thank you.

-Edit-

Wife said up to $2,000 AUD ($1,400 USD), which seems a bit much considering how awesome some of those cheaper printers look.

Maybe $1,000 USD all up printer, tax, shipping, materials, and some cool designs. Some of the models people have printed look as good as shop stuff, I&#39;m excited.
</div>

Wife just said "Get yourself a 3D printer for Christmas", I'm so excited, watching YouTube videos but I know nothing.

 Once you confirm that the filament is extruding with the correct color you'll get this message and you're ready to print. The printer came with an sd card preloaded, with several pre-sliced files. To get you started, i chose benchy here's a time lapse of my very first print. Overall, the quality is pretty good

 To get you started, i chose benchy here's a time lapse of my very first print. Overall, the quality is pretty good. There are several things about this printer that i'm particularly impressed with the first is the flexible magnetic print bed, which allows for easy removal of finished prints. Next is the auto calibration which ensures a near perfect, first layer, every print and continual reliability

Prusa i3 MK3S+ Review and Unboxing

 It'S a little frustrating., because we've gotten on there and we've asked questions and we're getting kind of level zero or level one support where they're they start with. --, this isn't a literal quote, but it's like “have. You tried turning it off and on again ” “Have

 And there's nothing wrong with the other slicers. It'S just Prusa is controlling the filament, the slicer and the printer., And when you do all three in tandem, you are controlling everything end to end and they can ensure that you're going to get really solid. Results

. We are voting with our dollars more than anything.. I hope this review has been insightful and helpful

. Another potential con is the price. at $ 1,000 it’s, far from the cheapest printer, but my experience has been with CR-10s and with FlashForge and with Qidi. Most of those printers have taken me more time and effort to set up manage repair, and we just really seen the value in spending more money to get the genuine thing, And on that note, we even have now stopped buying any knock-off or third-party parts

REVIEW: PRUSA i3 Mk3 (Tested after 1 Million + Hours)

1 by 8.3 by 8.3 inches) and considerably bigger than the 7-inches-cubed print volume of the Original Prusa Mini. 

 The MK3s+ supports printing with a wide variety of filaments, includes the simple yet powerful PrusaSlicer software, and comes with a handsome and helpful user manual and access to Prusa's extensive help resources and user forums. The MK3S+ is priced at the high end of open-frame printers with similar build volumes; you can find decent budget 3D printers such as the Anycubic Mega S (and others we have yet to review) for a fraction of the cost. But if you don't mind paying for proven excellence, the Original Prusa i3 MK3S+ easily earns our Editors' Choice honors and is as good as consumer-grade 3D printing gets.

 But if you don't mind paying for proven excellence, the Original Prusa i3 MK3S+ easily earns our Editors' Choice honors and is as good as consumer-grade 3D printing gets.

Print quality was very similar to the previous model's: uniformly above average, with only minor blemishes, most commonly an occasional and easily removed tail of loose filament. The MK3S+ did well with fine detail and in handling overhangs. 

Original Prusa i3 MK3S+ Review

stamped

Upgrade Pick

Creality Ender 2 Pro vs Prusa i3 MK3S+

Reviews by Topic

Ease Of Use

QUICK QUESTION!

You might also like