Hiking Boots/Shoes Recommendations?

Hiking boot recommendations?

Any recommendations for women's hiking shoes?

[Request] Hiking/outdoorsy style shoes that can handle lots of walking on concrete

Cold and wet weather hiking boots recommendations?

I am in need of a new pair of trail/hiking boots.

Hiking Boots for heavy use during the summer

Good pair of hiking shoes?

[Request] waterproof hiking shoes

[request] - Good quality walking shoes.

Hello Redditors. I'm in search of a classy yet extremely durable pair of hiking boots to take backpacking around the world for 12+ months with.

Hiking boots recommendations

Men's three season "urban hiker" (like Merrell MOAB but longer lasting)

BIFL Hiking boots for women

Hiking boots with good traction and can stand up to abuse.

Looking for a good pair of shoes for my weird feet

Request - Hiking Sandals

Request: Hiking Boots

Comfortable and cushiony shoes for walking on pavement 10KM/couple hours a day (UK)

Hiking sandals that last?

[Request] Powerful dishwasher with sanitize function?

I want the best god damned dishwasher money can buy.

Looking for the best, easiest to operate, cheapest dishwasher - Recommendation?

[Request] Best countertop dishwasher for reasonable price?

Can anyone recommend a good dishwasher?

Countertop/Portable Dishwasher

[Request] Dishwasher &lt;$1k Australian with QOL features and low water use

Dishwasher for Second Home

My friend bought a house with this KichenAid dishwasher from 1974. He says it works better than any of the other ones he has owned. He just has to convince his wife not to replace it.

What's a good Panel ready dishwasher under $1k?

Best socket set on the market $100-$150

[Request] Socket wrenches

I need a recommendation for a tool set that should last a lifetime. [Request]

Looking for a Mechanics tool set.

23 years later; GM Goodwrench socket set.

A Starter/Lifetime Tool set

Basic screwdriver set needed

Mechanic Tools that are BIFL

Trying to fill a tool roll for my truck and would like input on BFL tools like wrenches, pliers, socket sets, etc.

BIFL: Mastercraft ratchet set with lifetime warranty. Got it at 14, im 31. Went thru more abuse than you think!

Looking to upgrade my home hand tools

Was told to post this here. Husky 270pc toolset from Home Depot for $99, normally $199. Lifetime warranty too

[Request] Ratchet/Wrench/Etc tool set for home/bicycle/general use

Thoughts on a Honda Accord V6 2007?

2010 Honda Accord worth the buy?

Thoughts on a 2008 Honda accord v6 coupe EX-L?

2014 honda accord ??

After an initial round of research it seems like Honda Accord Hybrid is the right answer, but I want to pressure test that with you guys

2014 Accord V6 Touring (any thoughts?)

Which car ?

me again. 2010 2dr honda accord, 122k miles for $5,800. just want a reliable first car, thoughts?

Want to buy an Accord, any suggestions?

2020/2021 Honda Accord LX - Tell Me About Your Likes/Dislikes

Compact - Midsize suv

best small/midsize suv?

Looking for a used (06-14) reliable compact/mid-size SUV

compact/mid size suv

Midsize SUV

Recommendations for midsized SUVs to look at

Compact to Mid-Size SUV

Small to mid-size suv suggestions?

Midsize vehicle for three kids

Mid-Size SUV

Just tried a Lotus Elise Cup 250, driving impressions !

Dan Neil reviews Lotus Emira: As Good As It Gets

Considering a Lotus Elise - USA

How affordable are Lotus Elises from the 2005-2012 model year?

Lotus Exige Sport Final Edition review: farewell, Exige

I wanna know everything you know about a 2005 Lotus Elise

My Lotus Evora Review

Lotus retail sales up 24% in best performance for a decade

2022 Lotus Emira Looks to Be One of the Brand's Best

PURCHASING A LOTUS — Need Tips + Advice.

Looking for a good rpg/action adventure with a good story and good characters

Deep long rpgs?

Looking for a story-focused RPG

Looking for a complex RPG

Fantasy games with an detailed and immersive world?

[WSIB] I am in search for a open world RPG that will keep me busy for hundreds of hours.

Open world game with huge map, lots of things to do, and great graphics

WSIB Feeling a bit of an rpg lull and want something exciting like old school BioWare with a engaging story that doesn’t take 100 hours to play.

WSIB: long, immersive games with high quality storytelling and writing

looking for an open-world rpg

[WSIB] A turn based strategy game that isn’t 4X

Turn-based strategy game

Turn-based strategy games

[WSIB] Small-scale, medieval, strategy game, featuring pikemen and cavalry

(WSIB) Turn-based ”wargaming” game

[WSIB] Turn Based Strategy games

WSIB if I want a strategy game for dummies

WSIB Strategic Rpg

[WSIB] Good offline strategy/(ish) games?

What are some good "smaller scale to control, but still feel large scale battle" tactical / strategy games?

Bullet Hell-Type Games: Atomicrops vs. I, Dracula: Genesis vs. Others?

WSIB if i want a completely story driven indie game but have already played undertale and oneshot (preferably similar to those 2)

Post apocalyptic enthusiast, Underrail or Atom RPG?

[SIB] Undermine or Atomicrops

WSIB if I like "Run into things, need to grow in power/special items to move further so I come back after unlocking said element" type of games.

Blsoodborne or Resident evil 2 ?

What should I buy? Animal Crossing: New Horizons or Doom: Eternal

[WSIB] Fast-paced top-down roguelikes?

[SIB] I Hate Running Backwards or Planetary Dustoff? Or something else?

SIB Nuclear Throne?

What can you recommend for minimizing pores?

I know you can’t get rid of pores but I’m wondering is there anyway to make them smaller? I use La Roche Posay products. They keep my acne mostly at bay but I feel like my pores are just so large. Part of it is genetic, but just wondering if there’s anything else I can do at home to help. Thanks!

OPEN PORES- WHAT TO DO? IS THERE ANY PRODUCT I CAN USE?

What skincare products have you used that helped with large pores?

What is the best thing to use to tighten pores on your face?

Can anyone tell me why my pores are so huge and what I can do to minimize them?

How to reduce pores.

Hey guys, how do I make my pores not look like this? Info in comments (deleted and reposted for an error in the title)

Pores reduction tips?

Advice for shrinking pores on and around nose?

[sun care] sunscreen that doesn’t irritate rosacea and perioral dermatitis

[Sun Care] Looking for sunscreen that doesn't irritate Rosacea

Sunscreen recommendations for rosacea

Looking for a sunscreen for my acne prone skin.

[Sun Care] looking for a sunscreen that works well for people with Eczema.

Desperate for a good sunscreen

Looking for a Daily Suncreen

I’ve tried them all and I still can’t find my holy grail for my dry rosacea skin. Any other recommendations?

Sunscreen, eczema and makeup, Help [Sun care]

[Sun Care] Help with not being able to use Sunscreen

How can i stop a really greasy face?

How to best defeat oily skin?

Is there any long-lasting solution for oily face?

Oily Face -&gt; Wash Face -&gt; More Oily

Extremely oily skin

Y’all know some sort of cream or product I can buy to make my face less greasy looking?

super oily face help needed

Oily Skin— please help!

Really oily skin

How to have less oily skin?

Adrian Krebs

Johannes Engler

Tavis Lochhead

amazon.com

Rise 3D Printing

Make and Remake

My Tech Fun

The Edge of Tech

Nathan Builds Robots

Beanie's Hobbies 3D Printing

Hoffman Engineering

 It's a cantilever design, which means it has one Z-axis and the X gantry rides straight off of that, like this. The extra mounting bracket down here makes sure that it can hold that gantry up and support plenty of weight. The standard Creality hotend makes it easy to work on and upgrade. It has belt tensioners on the X and Y, which makes it super easy to adjust your belt tension

 I think it might just take the cake. Let's find out why. The Ender 2 Pro is a breeze to set up with only four steps to assemble it. It is going to be great for beginners and if you've had a 3D printer before, there's only a total of seven bolts needed to assemble this, so it might be the easiest printer you've ever put together

 The Ender 2 Pro is a breeze to set up with only four steps to assemble it. It is going to be great for beginners and if you've had a 3D printer before, there's only a total of seven bolts needed to assemble this, so it might be the easiest printer you've ever put together. It's a cantilever design, which means it has one Z-axis and the X gantry rides straight off of that, like this. The extra mounting bracket down here makes sure that it can hold that gantry up and support plenty of weight

 All of this looks great on paper, but let's take a quick look at a couple prints I got off the Ender 2 Pro. This is the conical flask in vase mode by clock spring. It's printed in atomic filament and came out great. This mini gym by Wexter was also printed in that atomic indigo golden sparkle filament, and it came out virtually perfect

Could the Ender 2 Pro Be The  Best 3D Printer UNDER $200?

 It's meant to be picked up and moved around. They've combined it with the handle When not in use you can take unload your filament and the arm will fold in for better storage It has a lot of good options to it But there were a few things that I felt fell short on this printer too, and I want to point those out Especially for the price point looking at the price point 170 and Ender 3 Pro is about 190 So roughly 200 so not much more for a lot more build area and a lot more machine This machine You have about half the build plate Which is great, but there were some things I felt Crowdy probably could have done better with this one that now I'm gonna have to upgrade and I want to point those out First part that I want to point out. Everything looks kind of good on that end And we'll get this guy screwed back in And I do love that they gave this kind of some swing that that's kind of a nice thing because I can swing it and put the Condensed the printer for better storage So that is a nice feature So wiring all looks good So now we got to wire in this guy so we'll get the control panel We'll get him plugged in and We'll pull that tape back We'll get this guy in his slots We'll slot him home All right, so that's looking good Got it good and connected And now at this point it's adjustment so We're done with the instruction book. We're actually going to get this guy powered on We're going to power them on for a little bit make sure everything looks right then I am going to set this guy aside so Um, the reason why i'm going to set it aside is one i'm going to plan on doing a hey We used it video But two I I'm not going to use this I see a tangled horrible mess right here and I don't have a normal spool up here because my expectation From creality was the half spool that we would normally get with an ender three or cr-10 and we didn't get that so I'm going to be uh Have to wait to actually power her on And I don't see a switch for voltage A lot of times I would expect to see a 115 or a 230 volt switch I don't see that on that this machine

 I had a lot of fun with it, especially doing small parts and things like that That's why this guy has been kept around in my shop for so long. It's when I have print jobs with itty-bitty parts and and lots of them I don't have to tie up a big printer to print a small piece That's where a small build plate comes in place but also if you're doing small stuff like Just small figurine vases stuff like that and you don't have a lot of room and you need something that's portable and easy to put Away the Ender 2 Pro is definitely a fit for you And especially when it comes into the cost of looking at like a Prusa or something like that This guy's price point is right around 170 bucks, which is not a bad price point It's well contained. It's meant to be picked up and moved around. They've combined it with the handle When not in use you can take unload your filament and the arm will fold in for better storage It has a lot of good options to it But there were a few things that I felt fell short on this printer too, and I want to point those out Especially for the price point looking at the price point 170 and Ender 3 Pro is about 190 So roughly 200 so not much more for a lot more build area and a lot more machine This machine You have about half the build plate Which is great, but there were some things I felt Crowdy probably could have done better with this one that now I'm gonna have to upgrade and I want to point those out First part that I want to point out

 Are you looking for a small FDM printer looking around looking at Prusa and all that well today I'm gonna talk about Creality's latest release the Ender 2 Pro. So join me inside Hey guys welcome to today's video as I said, we are looking at Creality's Ender 2 Pro this guy is a smaller printer than the Ender 3 and And it's a remake of an older one So the Ender 2 has been out for a long time a matter of fact It's hard to even find the parts for it anymore because it's just been it's not made anymore And that's this guy right here. So this is my Ender 2 heavily modded I actually came by this one secondhand, but it's a great little fantastic printer a small build plate Especially if you're wanting to do small stuff. Well Creality turned around and this year released the Pro version All of a sudden we're back to it to the small printer now we release this in competition to the Ender 3 which is a bit bigger and not as mobile as This printer it can be so one thing I'm going to talk about is if you're curious about the assembly check out my stream Because we did it live, but also I want to talk about pros and cons of this printer What I felt was great about it what I felt was wrong about it So this is actually the review now that I've used it for a week or so and kind of done some prints with it So I want to take a look at it and give you guys some true information that I think is relevant when you're considering your purchase If you guys are interested in this now one of the things to keep in mind that build platform

 This isn't going to work. This is going to be too small but if you're doing small prints like Some of the pokemon figures and stuff like that. You can still print a very tall narrow item So kind of keep that in mind uh As you kind of work through this one, it does kind of allow you to uh Uh to have some kind of cool fun stuff But definitely a good one. You can pick these up at micro center Uh, they did have them on amazon and of course the creality sites are out there Um, if there is an amazon link i'll put it in the description in the morning Um, some of them have not this guy has not been on amazon at least where you can catch him

3D Printer Ender 2 Pro Review

 Either way, I have to return it, as I don't want to have to start replacing parts on it weeks after purchase.

Bowden tube clogs immediately during each print

 We printed this bendy moveable slug and it came out absolutely fine, all the joints move, bends, twists, turns, an actual really good quality print. Ok then I went and printed this vase type bowl, fruit bowl type thing. This suffered from a little tiny bit of stringing here and there, I don't even know if you can see it, you might be able to see it. You just see some bit of stringing down here but you know, hold a lighter, something like that or just run your fingers over it or come straight off and as you can see the quality of this print is absolutely fantastic

 Also knocked off a bearing, now sometimes printers will struggle to print these, they'll print them but then they won't spin but as you can see with this one it will spin and turn and move just fine. It's a little bit tight because like a fool I printed it with a brim so a bit of the brim is still stuck here on the bottom which is obviously hindering the movement but if you didn't print it with a brim it would be absolutely fine. I mean I haven't done anything with the slicing program, I mean I'm just using Cura, running it on the Ender 2 profile, I haven't tweaked it or anything at all so with a little bit of tweaking the print quality from this thing would be absolutely amazing but I am so impressed with how this thing is printing, I mean it was £120 over here in the UK which for a 3D printer is actually quite cheap. Yes I know you've not exactly got the biggest bill plate but for printing smaller things it's absolutely ideal

 And that is the only issue I had because this thing was wobbling a lot but now it's stable. So that is the only issue that I have had with this printer. Apart from that it's been absolutely perfect and it has been an absolute joy to use. So remember guys, if you want 10% off this printer, 10% off the Krality Ender 3 S1 or the Krality CR-10 Pro Smart, then head over to Technology Outlet, the link will be down in the description below

 Apart from that it's been absolutely perfect and it has been an absolute joy to use. So remember guys, if you want 10% off this printer, 10% off the Krality Ender 3 S1 or the Krality CR-10 Pro Smart, then head over to Technology Outlet, the link will be down in the description below. Use my discount code BEANIE10 and you can then get 10% off any of those three printers. I highly recommend this printer for the sake of, I'm sure it's £120-129, obviously you'll get 10% off that as well but I can't fault this thing in any way shape or form

Creality Ender 2 Pro Test Prints (Amazing Budget Printer)

 As long as you can remember to disable the power loss detection before a spiral-based mode prints, the Ender-2 Pro can easily handle any small to medium sized prints you can throw at it. Thank you all for watching this review of the Ender-2 Pro. If you have any specific questions about the machine, leave them in the comments below and I'd be happy to answer them. And thank you Creality3D

 This pint-sized 3D printer is only $170 US dollars, but does it have the power to print above its weight class? Let's find out. As always, a disclaimer before I begin. I was sent this Ender 2 Pro for review by Creality3D.shop, an online distributor of Creality 3D printers

Can a $169 3D printer be Good? - Ender-2 Pro Review

shopify

sainsmart.com

pcmag.com

r/3Dprinting

Ender 3 max: Bigger build volume, pretty nice updates with the added yellow springs and metal extruder/filament sensor.  screen is ok but i dont really like that the power supply is in on the printer and not out of side, But i should be able to change that right? 

These printers are all around the same price range is my country ( below 300 euros, Netherlands) and i mainly want to experiment with them, print some fun stuff and get a good deal. 

 Happy New Year everyone! Welcome back to another purchase megathread!

For a link to last month's post, see [here](https://www.reddit.com/r/3Dprinting/comments/lv818a/purchase_advice_megathread_what_to_buy_who_to_buy/). Top comment was /u/Sausage54's 2021 Printer list [here](https://www.reddit.com/r/3Dprinting/comments/lv818a/purchase_advice_megathread_what_to_buy_who_to_buy/gpakpuq).

This thread is meant to conglomerate purchase advice for both newcomers and people looking for additional machines. Keeping this discussion to one thread means less searching should anyone have questions that may already have been answered here, as well as more visibility to inquiries in general, as comments made here will be visible for the entire month stuck to the top of the sub, and then linked to in the next month's thread.

If you are new to 3D printing, and are unsure of what to ask, try to include the following in your posts as a minimum:

* Your budget, set at a numeric amount. Saying "cheap," or "money is not a problem" is not an answer people can do much with. 3D printers can cost $100, they can cost $10,000,000, and anywhere in between. A rough idea of what you're looking for is essential to figuring out anything else.
* Your country of residence.
* If you are willing to build the printer from a kit, and what your level of experience is with electronic maintenance and construction if so.
* What you wish to do with the printer.
* Any extenuating circumstances that would restrict you from using machines that would otherwise fit your needs (limited space for the printer, enclosure requirement, must be purchased through educational intermediary, etc).

While this is by no means an exhaustive list of what can be included in your posts, these questions should help paint enough of a picture to get started. Don't be afraid to ask more questions, and never worry about asking too many. The people posting in this thread are here because they want to give advice, and any questions you have answered may be useful to others later on, when they read through this thread looking for answers of their own. Everyone here was new once, so chances are whoever is replying to you has a good idea of how you feel currently.

Additionally, a quick word on print quality: Most FDM/FFF (that is, filament based) printers are capable of approximately the same tolerances and print appearance, as the biggest limiting factor is in the nature of extruded plastic. **Asking if a machine has "good prints," or saying "I don't expect the best quality for $xxx" isn't actually relevant for the most part** with regards to these machines. Should you need additional detail and higher tolerances, you may want to explore SLA, DLP, and other photoresin options, as those *do* offer an increase in overall quality. If you are interested in resin machines, make sure you are aware of [how to use them safely](https://www.reddit.com/r/3DPrinting/wiki/resinprinting#wiki_safety). For these safety reasons we don't usually recommend a resin printer as someone's first printer.

As always, if you're a newcomer to this community, welcome. If you're a regular, welcome back.

<div class="md">Happy New Year everyone! Welcome back to another purchase megathread!

For a link to last month&#39;s post, see <a href="https://www.reddit.com/r/3Dprinting/comments/lv818a/purchase_advice_megathread_what_to_buy_who_to_buy/">here</a>. Top comment was <a href="/u/Sausage54">/u/Sausage54</a>&#39;s 2021 Printer list <a href="https://www.reddit.com/r/3Dprinting/comments/lv818a/purchase_advice_megathread_what_to_buy_who_to_buy/gpakpuq">here</a>.

This thread is meant to conglomerate purchase advice for both newcomers and people looking for additional machines. Keeping this discussion to one thread means less searching should anyone have questions that may already have been answered here, as well as more visibility to inquiries in general, as comments made here will be visible for the entire month stuck to the top of the sub, and then linked to in the next month&#39;s thread.

If you are new to 3D printing, and are unsure of what to ask, try to include the following in your posts as a minimum:

<ul>
<li>Your budget, set at a numeric amount. Saying &quot;cheap,&quot; or &quot;money is not a problem&quot; is not an answer people can do much with. 3D printers can cost $100, they can cost $10,000,000, and anywhere in between. A rough idea of what you&#39;re looking for is essential to figuring out anything else.</li>
<li>Your country of residence.</li>
<li>If you are willing to build the printer from a kit, and what your level of experience is with electronic maintenance and construction if so.</li>
<li>What you wish to do with the printer.</li>
<li>Any extenuating circumstances that would restrict you from using machines that would otherwise fit your needs (limited space for the printer, enclosure requirement, must be purchased through educational intermediary, etc).</li>
</ul>

While this is by no means an exhaustive list of what can be included in your posts, these questions should help paint enough of a picture to get started. Don&#39;t be afraid to ask more questions, and never worry about asking too many. The people posting in this thread are here because they want to give advice, and any questions you have answered may be useful to others later on, when they read through this thread looking for answers of their own. Everyone here was new once, so chances are whoever is replying to you has a good idea of how you feel currently.

Additionally, a quick word on print quality: Most FDM/FFF (that is, filament based) printers are capable of approximately the same tolerances and print appearance, as the biggest limiting factor is in the nature of extruded plastic. Asking if a machine has &quot;good prints,&quot; or saying &quot;I don&#39;t expect the best quality for $xxx&quot; isn&#39;t actually relevant for the most part with regards to these machines. Should you need additional detail and higher tolerances, you may want to explore SLA, DLP, and other photoresin options, as those do offer an increase in overall quality. If you are interested in resin machines, make sure you are aware of <a href="https://www.reddit.com/r/3DPrinting/wiki/resinprinting#wiki_safety">how to use them safely</a>. For these safety reasons we don&#39;t usually recommend a resin printer as someone&#39;s first printer.

As always, if you&#39;re a newcomer to this community, welcome. If you&#39;re a regular, welcome back.
</div>

Purchase Advice Megathread: What To Buy, Who To Buy It From, And More, In April 2021

 I had to extend them using the old ones.  Once replaced, I improved the head strain relief to reduce the risk of reoccurrence by designing a strain relief plate that attaches to the deck. Now it operates smoothly and hasn't broken since. It attaches with no screws or adhesive, but slips into place and stays put

Broke after 40 hours of use, otherwise excellent.

 My family owns 4 Creality printers and this one was the worst, I have too assume that they have really let their quality control go down hill and that’s too bad, I’m not sure if I will buy another..

 Well I have had plenty of problems with this one for sure, it was poorly assembled,the hotend was damaged out of the box and nothing would stick to the glass print surface and the shaft on the extruder motor was bent. After replacing all of these parts I finally have it working as it should. My family owns 4 Creality printers and this one was the worst, I have too assume that they have really let their quality control go down hill and that’s too bad, I’m not sure if I will buy another.

Needs work

notebookcheck.net

stamped

Best for Most

Creality Ender 2 Pro vs Creality Ender 3 Max

QUICK QUESTION!

You might also like