Cougar QBX vs FormD T1

Let's get those out All right, so once those screws are out, this really kind of just falls apart There's the mounts to mount another two and a half i...

The Formd T1 is always a sexy case and is probably the winner, but you knocked it out of the park with the customizations on that H1.

5" (2 in the bracket and 1 behind the odd drive), the other one is a bit more tricky due t o cable management but still ok, you can add easily a 3.5" drive, so you are covered for drives (plus M2 on your board maybe!), in term of heat, I have a full graphic card shapphire rx580 and an i7-9700k processor, I have switch the original 92mm fan from the case with a noctua, gives me PWM and silence, you can fit a cpu cooler up to 145, and so giving up the side fan, I have a 125mm cpu cooler so I could technically fit a slim fan on the side, so far I didn't add any other fan, even with overclock the temps are ok, ~35 idling and ~70 full load. (you can easily add 2 120mm slim at the bottom, 1 120mm at the top, one 80mm in the front). Probably the best case if you are in need for good ventilation

When we compare the same 120mm liquid cooler being used in other cases like the Circle Pro and the Thawzone Mjolnir, we're looking at about a 7 degree...