Cooler Master MasterBox NR200P vs SSUPD Meshlicious Mini-ITX

The tempered glass setup is surprisingly okay too, but runs our 2070 Super about 5 degrees warmer. So what happens then when you install an RTX 3090 F...

Granted we are using an updated 280ml cooler but the thermal difference here between the Z63 and X62 in my testing showed less than 1 degree. So the b...

Cooler master nr200p because you can easily build smaller systems due to nvme, no optical drives, and no large hard drives anymore. Oh yeah and also it has actual good airflow unlike my shitty previous evolv matx case.

But I mean, if you're just trying to put one of these on your desk, save up some space, the Meshlicious is pretty damn impressive. I gotta say, I didn...

The top fans use a tool less mounting system, which is great and they provide the hardware for mounting two fans, the problem is it's only compatible with standard 25mm thick fans. If you want to use slim fans you have to do some custom work to get them to mount. The steel feels a bit too flimsy. I'd pay more for a more premium version with thicker/sturdier steel, maybe some aluminum, and better quality paint

Now the exterior of the meshalicious is just that, it's mesh. Unless you opt for the tempered glass, then it's mesh and glass. It's mesh-a-glash. Glas...

We've got our hands on the Cooler Master NR200P and we're going to do a build with it today. But before we do that, we're going to just tear it down a...

What we're going to do, we're going to build, we're going to test the thermals, we're going to pull it apart and see what makes this thing tick and th...

I think the community has been waiting for something affordable like this for a long time. For me, aesthetics was something I really wanted to do, so I went with a Lian Li TU150 instead.

It's a SFF case that gives up very little relative to medium and full size cases. Kudos to the engineers for their hard work and restraint when it comes to the exterior and interior design. It's a case that is easy to build in and even fun. The interior obviously had a lot of thought put into it and that pays off

Updated review: The front panel connectors come Presleeved allowing you to plug all 8 pins in at once instead of individually. This is great but I failed to check to see if the way they had their cable sleeved would line up with the pins on my motherboard. After several rebuilds I feel like an idiot cause I didn’t think of it. Make sure you check the way your cables are sleeved and check your motherboard manual and make sure the connections line up properly or you’ll probably spend a whole bunch of time trying to fix a computer blindly

A killer in the right hands? Try it out for yourself on Xtify.com. Now at first I thought this was a brilliant design given the modularity of the rise...