Cooler Master MasterBox NR200P vs Jonsplus i100 Pro

The tempered glass setup is surprisingly okay too, but runs our 2070 Super about 5 degrees warmer. So what happens then when you install an RTX 3090 F...

The Jonsplus i100 Pro is a case that is already in production and supports this kind of layout with 360 radiator

I have 5 case fans running in my build. To me this is the perfect size. it's larger than the typical ITX case but smaller than a typical mATX case; basically right in the middle. seems to be standard for an ITX motherboard to have 2 NVME slots so the need for an SSD is more for if you want just extra storage

Jonsplus i100 (25L) vs. IQUNIX ZX-1 (12L). I didn't realise how big this smallish case attually looks. Picked up the Jonsplus i100 Pro used for £70 for 360mm radiator custom loop for 12700K & 6900XT

The top fans use a tool less mounting system, which is great and they provide the hardware for mounting two fans, the problem is it's only compatible with standard 25mm thick fans. If you want to use slim fans you have to do some custom work to get them to mount. The steel feels a bit too flimsy. I'd pay more for a more premium version with thicker/sturdier steel, maybe some aluminum, and better quality paint

The price of this case is £157, there are two variants in terms of colour, silver or you can have black, and two variants in terms of tempered glass. ...

We've got our hands on the Cooler Master NR200P and we're going to do a build with it today. But before we do that, we're going to just tear it down a...

One of the few ITX cases that allows a 360mm AIO + 3 slot gpu, great temps, build quality and looks, also easy to build in.

I think the community has been waiting for something affordable like this for a long time. For me, aesthetics was something I really wanted to do, so I went with a Lian Li TU150 instead.

Turns out it's also a little bit cheaper. So this is one of those cases where tempered glass actually makes a lot of sense, seeing as it doesn't reall...

Updated review: The front panel connectors come Presleeved allowing you to plug all 8 pins in at once instead of individually. This is great but I failed to check to see if the way they had their cable sleeved would line up with the pins on my motherboard. After several rebuilds I feel like an idiot cause I didn’t think of it. Make sure you check the way your cables are sleeved and check your motherboard manual and make sure the connections line up properly or you’ll probably spend a whole bunch of time trying to fix a computer blindly

Go for a custom sleeved SFX power supply and it's going to be easier. Go for non-RGB fans, it's going to be easier. So overall, I think three and a ha...