Cooler Master MasterBox NR200 vs Lian Li A4-H2O

So I would say both cases have their own advantages but a case cannot be good if it doesn't perform well and thankfully the results I got are pretty d...

And the side panels are not a significant barrier, as you can see. On the GPU side, it is also very well controlled because of the exhaust. So no heat...

However, I'll again suggest you check out my ITX build as the Cooler Master NR200 is the best value for ITX. The PSU is fine I'm sure, but make sure whatever you're getting has quality capacitors and a quiet fan (if you care about noise). I wouldn't recommend Windows 10 Pro as there's not much reason to get Pro over Home. The only real tangible difference is Bitlocker, but there's not much reason for it unless you really care about your privacy and think someone will have access to your machine physically

The $35 difference between these cable options is hardly marginal on a case model that has a US base price of $120, so you'll want to be sure you really need the 4. (We will be expanding our testing pool in coming months.) So, for now, we tested the A4-H2O against itself in closed-panel and open-panel configurations to see how well it would contain noise and let out heat.

I find that really cool. And we also have a plastic top panel, which is also gray, trying to mix things up so it's not a boring white enclosure. The I...

99. The A4 HTO features four removable aluminium panels, the one on the top is 2mm thick, while the ones on the side and the front are 1.5mm thick. Ta...

Cooler Master NR200: seems the best overall but might be impractical to carry around or put in a bag. Cougar QBX: cheap alternative to the NR200, but about the same size. Lian Li TU150: bigger on this list, but has a handle! Is it really practical to carry it?

The media could not be loaded. Overall this case is really well made. Best part is it fits in my backpack for carry on flights. Aio fitment is a bit of a challenge but so far the NZXT x53 cracken and Corsair H100i Capellix fit when tubes are routed over ram and under power supply (in picture

I have 5 case fans running in my build. To me this is the perfect size. it's larger than the typical ITX case but smaller than a typical mATX case; basically right in the middle. seems to be standard for an ITX motherboard to have 2 NVME slots so the need for an SSD is more for if you want just extra storage

So did that, got this in the front door, everything fits, although, you know, as you can also see at the bottom of the case here, I will have some lit...

So I'm feeling like an inconsistent parent at the moment. The NR200P Max from Cooler Master. This was a logical upgrade to the non-Max edition, which ...

Lian Li A4 H2O gets my seal of approval 👍. Good build quality, easy to work with, not too big, good pricing (with pcie 4.0 cable included), no major flaws unlike all other ITX cases that i have used so far.

So if you want to gain access to absolutely every single part inside the chassis, no trouble at all. It's a similar story with the floor of the case w...

And I think the timing here is absolutely perfect. There is no other case right now that can fit these components in this size. The NCase M one is a l...