Cooler Master MasterBox NR200 vs Cooler Master MasterBox NR200P

So I would say both cases have their own advantages but a case cannot be good if it doesn't perform well and thankfully the results I got are pretty d...

The tempered glass setup is surprisingly okay too, but runs our 2070 Super about 5 degrees warmer. So what happens then when you install an RTX 3090 F...

However, I'll again suggest you check out my ITX build as the Cooler Master NR200 is the best value for ITX. The PSU is fine I'm sure, but make sure whatever you're getting has quality capacitors and a quiet fan (if you care about noise). I wouldn't recommend Windows 10 Pro as there's not much reason to get Pro over Home. The only real tangible difference is Bitlocker, but there's not much reason for it unless you really care about your privacy and think someone will have access to your machine physically

Nano S - great case, but it takes a lot of space on the table, in addition, in the previous build with ATX PSU there was a problem with video card cooling - maybe using sfx PSU will solve the problem?. Node 202 - impossible to use high coolers, also, in my opinion, quite noisy. NR200p - didn't like it very much, quite noisy and difficult to cool with sfx-l power supply. Lian Li Tu 150 - I like the look, nice, compact enough for me, but nowhere can I find information about how quiet it is?

I find that really cool. And we also have a plastic top panel, which is also gray, trying to mix things up so it's not a boring white enclosure. The I...

The top fans use a tool less mounting system, which is great and they provide the hardware for mounting two fans, the problem is it's only compatible with standard 25mm thick fans. If you want to use slim fans you have to do some custom work to get them to mount. The steel feels a bit too flimsy. I'd pay more for a more premium version with thicker/sturdier steel, maybe some aluminum, and better quality paint

I think the community has been waiting for something affordable like this for a long time. For me, aesthetics was something I really wanted to do, so I went with a Lian Li TU150 instead.

I think the community has been waiting for something affordable like this for a long time. For me, aesthetics was something I really wanted to do, so I went with a Lian Li TU150 instead.

Cooler Master NR200: seems the best overall but might be impractical to carry around or put in a bag. Cougar QBX: cheap alternative to the NR200, but about the same size. Lian Li TU150: bigger on this list, but has a handle! Is it really practical to carry it?

Cooler master nr200p because you can easily build smaller systems due to nvme, no optical drives, and no large hard drives anymore. Oh yeah and also it has actual good airflow unlike my shitty previous evolv matx case.

I have 5 case fans running in my build. To me this is the perfect size. it's larger than the typical ITX case but smaller than a typical mATX case; basically right in the middle. seems to be standard for an ITX motherboard to have 2 NVME slots so the need for an SSD is more for if you want just extra storage

I have 5 case fans running in my build. To me this is the perfect size. it's larger than the typical ITX case but smaller than a typical mATX case; basically right in the middle. seems to be standard for an ITX motherboard to have 2 NVME slots so the need for an SSD is more for if you want just extra storage

So I'm feeling like an inconsistent parent at the moment. The NR200P Max from Cooler Master. This was a logical upgrade to the non-Max edition, which ...

We've got our hands on the Cooler Master NR200P and we're going to do a build with it today. But before we do that, we're going to just tear it down a...

So if you want to gain access to absolutely every single part inside the chassis, no trouble at all. It's a similar story with the floor of the case w...

Updated review: The front panel connectors come Presleeved allowing you to plug all 8 pins in at once instead of individually. This is great but I failed to check to see if the way they had their cable sleeved would line up with the pins on my motherboard. After several rebuilds I feel like an idiot cause I didn’t think of it. Make sure you check the way your cables are sleeved and check your motherboard manual and make sure the connections line up properly or you’ll probably spend a whole bunch of time trying to fix a computer blindly

There is a lot to talk about here for the NR200, and I think it's going to surprise a lot of you, so let's take a look. Usually, the price is the last...

Do you want it to be pretty, or do you want extra airflow with a ventilated side panel? This is a SFF small form factor case, which means we're talkin...