Hiking Boots/Shoes Recommendations?

Hiking boot recommendations?

Any recommendations for women's hiking shoes?

[Request] Hiking/outdoorsy style shoes that can handle lots of walking on concrete

Cold and wet weather hiking boots recommendations?

I am in need of a new pair of trail/hiking boots.

Hiking Boots for heavy use during the summer

Good pair of hiking shoes?

[Request] waterproof hiking shoes

[request] - Good quality walking shoes.

Hello Redditors. I'm in search of a classy yet extremely durable pair of hiking boots to take backpacking around the world for 12+ months with.

Hiking boots recommendations

Men's three season "urban hiker" (like Merrell MOAB but longer lasting)

BIFL Hiking boots for women

Hiking boots with good traction and can stand up to abuse.

Looking for a good pair of shoes for my weird feet

Request - Hiking Sandals

Request: Hiking Boots

Comfortable and cushiony shoes for walking on pavement 10KM/couple hours a day (UK)

Hiking sandals that last?

[Request] Powerful dishwasher with sanitize function?

I want the best god damned dishwasher money can buy.

Looking for the best, easiest to operate, cheapest dishwasher - Recommendation?

[Request] Best countertop dishwasher for reasonable price?

Can anyone recommend a good dishwasher?

Countertop/Portable Dishwasher

[Request] Dishwasher &lt;$1k Australian with QOL features and low water use

Dishwasher for Second Home

My friend bought a house with this KichenAid dishwasher from 1974. He says it works better than any of the other ones he has owned. He just has to convince his wife not to replace it.

What's a good Panel ready dishwasher under $1k?

Best socket set on the market $100-$150

[Request] Socket wrenches

I need a recommendation for a tool set that should last a lifetime. [Request]

Looking for a Mechanics tool set.

23 years later; GM Goodwrench socket set.

A Starter/Lifetime Tool set

Basic screwdriver set needed

Mechanic Tools that are BIFL

Trying to fill a tool roll for my truck and would like input on BFL tools like wrenches, pliers, socket sets, etc.

BIFL: Mastercraft ratchet set with lifetime warranty. Got it at 14, im 31. Went thru more abuse than you think!

Looking to upgrade my home hand tools

Was told to post this here. Husky 270pc toolset from Home Depot for $99, normally $199. Lifetime warranty too

[Request] Ratchet/Wrench/Etc tool set for home/bicycle/general use

Thoughts on a Honda Accord V6 2007?

2010 Honda Accord worth the buy?

Thoughts on a 2008 Honda accord v6 coupe EX-L?

2014 honda accord ??

After an initial round of research it seems like Honda Accord Hybrid is the right answer, but I want to pressure test that with you guys

2014 Accord V6 Touring (any thoughts?)

Which car ?

me again. 2010 2dr honda accord, 122k miles for $5,800. just want a reliable first car, thoughts?

Want to buy an Accord, any suggestions?

2020/2021 Honda Accord LX - Tell Me About Your Likes/Dislikes

Compact - Midsize suv

best small/midsize suv?

Looking for a used (06-14) reliable compact/mid-size SUV

compact/mid size suv

Midsize SUV

Recommendations for midsized SUVs to look at

Compact to Mid-Size SUV

Small to mid-size suv suggestions?

Midsize vehicle for three kids

Mid-Size SUV

Just tried a Lotus Elise Cup 250, driving impressions !

Dan Neil reviews Lotus Emira: As Good As It Gets

Considering a Lotus Elise - USA

How affordable are Lotus Elises from the 2005-2012 model year?

Lotus Exige Sport Final Edition review: farewell, Exige

I wanna know everything you know about a 2005 Lotus Elise

My Lotus Evora Review

Lotus retail sales up 24% in best performance for a decade

2022 Lotus Emira Looks to Be One of the Brand's Best

PURCHASING A LOTUS — Need Tips + Advice.

Looking for a good rpg/action adventure with a good story and good characters

Deep long rpgs?

Looking for a story-focused RPG

Looking for a complex RPG

Fantasy games with an detailed and immersive world?

[WSIB] I am in search for a open world RPG that will keep me busy for hundreds of hours.

Open world game with huge map, lots of things to do, and great graphics

WSIB Feeling a bit of an rpg lull and want something exciting like old school BioWare with a engaging story that doesn’t take 100 hours to play.

WSIB: long, immersive games with high quality storytelling and writing

looking for an open-world rpg

[WSIB] A turn based strategy game that isn’t 4X

Turn-based strategy game

Turn-based strategy games

[WSIB] Small-scale, medieval, strategy game, featuring pikemen and cavalry

(WSIB) Turn-based ”wargaming” game

[WSIB] Turn Based Strategy games

WSIB if I want a strategy game for dummies

WSIB Strategic Rpg

[WSIB] Good offline strategy/(ish) games?

What are some good "smaller scale to control, but still feel large scale battle" tactical / strategy games?

Bullet Hell-Type Games: Atomicrops vs. I, Dracula: Genesis vs. Others?

WSIB if i want a completely story driven indie game but have already played undertale and oneshot (preferably similar to those 2)

Post apocalyptic enthusiast, Underrail or Atom RPG?

[SIB] Undermine or Atomicrops

WSIB if I like "Run into things, need to grow in power/special items to move further so I come back after unlocking said element" type of games.

Blsoodborne or Resident evil 2 ?

What should I buy? Animal Crossing: New Horizons or Doom: Eternal

[WSIB] Fast-paced top-down roguelikes?

[SIB] I Hate Running Backwards or Planetary Dustoff? Or something else?

SIB Nuclear Throne?

What can you recommend for minimizing pores?

I know you can’t get rid of pores but I’m wondering is there anyway to make them smaller? I use La Roche Posay products. They keep my acne mostly at bay but I feel like my pores are just so large. Part of it is genetic, but just wondering if there’s anything else I can do at home to help. Thanks!

OPEN PORES- WHAT TO DO? IS THERE ANY PRODUCT I CAN USE?

What skincare products have you used that helped with large pores?

What is the best thing to use to tighten pores on your face?

Can anyone tell me why my pores are so huge and what I can do to minimize them?

How to reduce pores.

Hey guys, how do I make my pores not look like this? Info in comments (deleted and reposted for an error in the title)

Pores reduction tips?

Advice for shrinking pores on and around nose?

[sun care] sunscreen that doesn’t irritate rosacea and perioral dermatitis

[Sun Care] Looking for sunscreen that doesn't irritate Rosacea

Sunscreen recommendations for rosacea

Looking for a sunscreen for my acne prone skin.

[Sun Care] looking for a sunscreen that works well for people with Eczema.

Desperate for a good sunscreen

Looking for a Daily Suncreen

I’ve tried them all and I still can’t find my holy grail for my dry rosacea skin. Any other recommendations?

Sunscreen, eczema and makeup, Help [Sun care]

[Sun Care] Help with not being able to use Sunscreen

How can i stop a really greasy face?

How to best defeat oily skin?

Is there any long-lasting solution for oily face?

Oily Face -&gt; Wash Face -&gt; More Oily

Extremely oily skin

Y’all know some sort of cream or product I can buy to make my face less greasy looking?

super oily face help needed

Oily Skin— please help!

Really oily skin

How to have less oily skin?

Adrian Krebs

Johannes Engler

Tavis Lochhead

amazon.com

sainsmart.com

The 3D Print General

r/3Dprinting

r/prusa3d

 This lion and benchy at .1 millimeter layer heights have minor imperfections, but overall they're still great for me, not tweaking much at all and now here's a list for my pros and cons with some things that i didn't mention earlier: the pros the price. This is basically a direct competitor to that ender. 3V2

 I haven't tried this on anything other than pla, but the print sticks great, and then it comes off easier than anything. I'Ve personally tried before just a quick sneak peek on these prints coming up soon on the screen now, so you can see what i mean these first two test prints are nothing special, but they at least. Let me know everything is working as it should be. Now it's a little bit confusing and likely explained elsewhere online that i missed, but i just couldn't find their instructions for slicing a print

 I recently reviewed at under 300 the silent board. This printer is extremely quiet, especially when compared to earlier models the build plate, it's magnetic meaning it's really easy to remove, and you don't need bed clips getting in the way of your build area. I haven't yet need to actually remove the build plate to get my print off since a slight lift of the corner, popped them off each time so far. This is my new favorite build plate, but we'll have to see how it holds up to other materials over time make sure to leave in the comments down below if you've had this type of build plate

 I haven't yet need to actually remove the build plate to get my print off since a slight lift of the corner, popped them off each time so far. This is my new favorite build plate, but we'll have to see how it holds up to other materials over time make sure to leave in the comments down below if you've had this type of build plate. For a longer time than me, the touch screen it's hands down the most useful that i've personally used thus far. It may not be perfectly user intuitive to someone brand new to 3d printing, but someone like myself really appreciates the ability to tweak just about anything

BIQU B1 3D Printer Review

Ultimately, having gone the Ender route, I fear nothing in 3D printing land.  I've stared into the abyss of nozzle crashes, wrestled the frame back into square after an ugly end-stop fail, and battled the BLTouch into submission with mighty firmware hacks.  I've upgraded the hell out of it and it's now almost as reliable and consistent as my MK3S and still not as expensive.

<div class="md"><p>title</p>
</div>

I've heard that a lot of people buy an ender 3 for learning printing, and then pull the trigger on a prusa. I'd like to skip the creality part because of their treatment of open source. Will a prusa also allow for upgrades/learning experience? Is it worth it to go with a prusa right away?

 BigTreeTech (the manufacturer) quickly contacted the Amazon reseller and I had a new set of FIVE TMC2225 drivers shipped very quickly. I only needed one, so I will have extras. Customer service exceeded my expectations. They helped me via email to troubleshoot and isolate the problem

Great Prints, Great Platform for Upgrades

 I keep it around 60mm/s and I rarely have a failed print caused by the machine (pobody's nerfect). The touchscreen makes  the interface so much easier, the print quality is phenomenal for the price point, and I haven't had a single clog yet (I also don't try to see if I can get the guide wheels to smoke). I've done a bit of PETG on it, but I don't really do nylons and infused filaments so I can't speak to its tolerances there.I haven't really done any upgrades to it besides using RPi with Octoprint and it runs like a dream

I already had an Ender 3 and a Craftbot Plus when I bought the Biqu B1. After a couple months of printing at least 50g of PLA per day on it, I have to say it's a trooper. I keep it around 60mm/s and I rarely have a failed print caused by the machine (pobody's nerfect). The touchscreen makes  the interface so much easier, the print quality is phenomenal for the price point, and I haven't had a single clog yet (I also don't try to see if I can get the guide wheels to smoke)

It's a solid printer that's quiet and user-friendly

 Just moves the print head off to the side, pauses the print and waits for you to retract and then reinsert some new filament, at which point you can just resume the print where you left off the interface in general is all very user friendly. I'Ve never used one like this before i'm not familiar with it, but it felt easy enough to use straight off the bat without having to look anything up in the manual or look for help online. It was all pretty obvious what things do on the software side. It'S compatible with a wide range of packages

 So, although i'm not a fan of bowden tubes, it hasn't presented a problem for me yet and they have just released a new direct drive print head, which you can upgrade if you wish. It also features a filament run out sensor, which i did get the chance to test and can confirm that when the filament runs out, it is really easy to deal with it. Just moves the print head off to the side, pauses the print and waits for you to retract and then reinsert some new filament, at which point you can just resume the print where you left off the interface in general is all very user friendly. I'Ve never used one like this before i'm not familiar with it, but it felt easy enough to use straight off the bat without having to look anything up in the manual or look for help online

 It'S running an skr 1.4 board along with removable, tmc 2088 drivers and, as i said, they're removable, so should you wish to upgrade or need to replace them? That'S easy to do as well in terms of ease of use. First, the 3.5 inch color touchscreen interface itself is really nice

 It'S super easy to use very reliable for me. So far, oh and it also comes in black, if you can't stand the thought of a printer with pink highlights on it. So thank you to beat you for sending over the b1 for review and, if you'd like to win a b2b one for yourself, please head on over to the link in the description or go directly to makeusof.com giveaways, where you'll find all our currently running competitions

Biqu B1: Best Budget 3D Printer Yet

stamped

notebookcheck.net

tom's Hardware

Creality&rsquo;s Ender 3 S1 Pro is the latest, and most impressive, iteration of the popular Ender 3 line. Not a cheap DIY 3D printer in need of upgrades like its predecessors, the $479 S1 Pro arrives fully loaded, delivering an out-of-the-box experience that&rsquo;s simple for beginners and powerful for experienced makers
The Ender 3 S1 Pro comes mostly assembled and only took us about 15 minutes and a handful of bolts to put together. Bed leveling &ndash; the bane of makers new to the hobby &ndash; is no longer a worry with Creality&rsquo;s CR Touch probe. This is by far one of the easiest auto leveling systems we&rsquo;ve tested. 

TechGearLab

If you're looking to get into 3D printing for the least amount of money possible, the Creality 3D Ender 3 Pro is a great bet. This printer is a fantastic value, coupling excellent overall performance with one of the lowest list prices of the entire group. Its PLA print quality floored us in some of our tests, and it is relatively easy to use once you get the hang of it and get all of its settings dialed in. It has an impressive set of printing capabilities for its price range and decent customer service and support. 
That said, we wouldn't recommend the Creality 3D Ender 3 Pro to anyone not prepared to do a little tinkering with their printer. It is far from a turnkey solution when it arrives — it took the most time to set up of any of the printers in our test fleet. The bulk of the assembly is completed at the factory, so it is much quicker to put together than a full kit, but you still need to attach all the main assemblies and plug in the wiring harness. This takes an hour or two, and there are plenty of resources available from the manufacturer or third parties to help walk you through it. However, it can be a bit daunting if you aren't tech-savvy or well-versed in 3D printers in general. It also can be improved quite a bit by some printed or purchased upgrades. Despite the more involved assembly process, this is still our top recommendation for anyone on a tight budget. Unlike some other bargain models, the Creality 3D Ender 3 Pro is a printer that you won't immediately outgrow — but expect to treat the machine like a project of its own, rather than just a tool. 
Read more: Creality 3D Ender 3 Pro review

Budget Pick

walmart.com

pcmag.com

Teaching Tech

r/boardgames

r/buildapcsales

r/ryobi

r/MechanicalKeyboards

r/ErgoMechKeyboards

This is a screaming deal for a home-use machine.  I moved from an ancient Prusa i3 to an Ender 5 plus (at four times the price of this Ender 3 Pro) and have been very, very happy with it.

[3D Printer] Creality Ender 3 Pro - $99 after coupon (in store only)

 This is what i printed on it. These are running so we're going to do a sound floor right so just going to look at what is the current sound level and then we'll compare it once we have the printer running all right, so you can see it's anywhere from between 45 and 53.. Let'S get the printer running all right, so the printer started, i'm going to do is go back to our sound and then we'll see how quiet it is not much difference

 This is really nice. It'S a very, very durable part um. This is a a leg holder for 3d printer. I did some petg right

 Carbon fiber, so we're going to be taking a look at the overall print samples that we've gotten using some carbon fiber filament that we have in our kind of lab area and you'll see how good this quality is, so that pei spring steel sheet is for printing. Those higher temperature materials, but it's going to work well with against standard pla, petg, abs and all the things that you're printing normally now. In addition to that, the nozzle temperature has changed quite a bit. Uh you're going to be able to raise the temperature all the way up to 300 c and the bed could go all the way up to 100 c now that is again to be able to support these materials that require higher temperature to print now, keep in Mind that when you're printing, these higher temp materials having an enclosure is always a good idea now this has no enclosure, so you're going to see the overall quality that i've gotten printing, petg or abs through this printer, and i have to say that it's done a Really good job, but once again i'm having some type of enclosure, still something that i would recommend now

 This is what i like so much about this uh. This ender series is it's really just out of the box tinker-free. It just works great first layers, no real tweaking you know using standard settings. It'S going

The Best Ender Yet?  Creality Ender 3 S1 Pro!

 So to correct this I had to invest in a BLTouch so I can do a mesh bed leveling - otherwise if I zero to those corners and print in the area the nozzle will gouge the bed. So at this point I'm unwilling to deal with them any further - after giving me such a fuss over a bracket and a cheap mat can you imagine the response I'd get for an entire heating bed? So - buyer beware indeed. I will be contacting Amazon finally to see if I can't get a little better response. I will update if anything changes

Updated: Decent cheap printer that needs better quality control and better customer service

 It does have a cooling fan, but the difference is that cooling fan only comes on when it needs to reducing the noise. When the printer is sitting there at idle, I think on paper that the printer should now be safe. I mean well is a trusted brand and it's built that reputation from years of quality products. Therefore, there should be even smaller chance than before of anything failing and catching on fire

Ender 3 Pro review: What’s different and is it worth the extra money?

walmart

Biqu B1 vs Creality Ender 3 Pro

Reviews by Topic

Reliability

QUICK QUESTION!

You might also like