Hiking Boots/Shoes Recommendations?

Hiking boot recommendations?

Any recommendations for women's hiking shoes?

[Request] Hiking/outdoorsy style shoes that can handle lots of walking on concrete

Cold and wet weather hiking boots recommendations?

I am in need of a new pair of trail/hiking boots.

Hiking Boots for heavy use during the summer

Good pair of hiking shoes?

[Request] waterproof hiking shoes

[request] - Good quality walking shoes.

Hello Redditors. I'm in search of a classy yet extremely durable pair of hiking boots to take backpacking around the world for 12+ months with.

Hiking boots recommendations

Men's three season "urban hiker" (like Merrell MOAB but longer lasting)

BIFL Hiking boots for women

Hiking boots with good traction and can stand up to abuse.

Looking for a good pair of shoes for my weird feet

Request - Hiking Sandals

Request: Hiking Boots

Comfortable and cushiony shoes for walking on pavement 10KM/couple hours a day (UK)

Hiking sandals that last?

[Request] Powerful dishwasher with sanitize function?

I want the best god damned dishwasher money can buy.

Looking for the best, easiest to operate, cheapest dishwasher - Recommendation?

[Request] Best countertop dishwasher for reasonable price?

Can anyone recommend a good dishwasher?

Countertop/Portable Dishwasher

[Request] Dishwasher &lt;$1k Australian with QOL features and low water use

Dishwasher for Second Home

My friend bought a house with this KichenAid dishwasher from 1974. He says it works better than any of the other ones he has owned. He just has to convince his wife not to replace it.

What's a good Panel ready dishwasher under $1k?

Best socket set on the market $100-$150

[Request] Socket wrenches

I need a recommendation for a tool set that should last a lifetime. [Request]

Looking for a Mechanics tool set.

23 years later; GM Goodwrench socket set.

A Starter/Lifetime Tool set

Basic screwdriver set needed

Mechanic Tools that are BIFL

Trying to fill a tool roll for my truck and would like input on BFL tools like wrenches, pliers, socket sets, etc.

BIFL: Mastercraft ratchet set with lifetime warranty. Got it at 14, im 31. Went thru more abuse than you think!

Looking to upgrade my home hand tools

Was told to post this here. Husky 270pc toolset from Home Depot for $99, normally $199. Lifetime warranty too

[Request] Ratchet/Wrench/Etc tool set for home/bicycle/general use

Thoughts on a Honda Accord V6 2007?

2010 Honda Accord worth the buy?

Thoughts on a 2008 Honda accord v6 coupe EX-L?

2014 honda accord ??

After an initial round of research it seems like Honda Accord Hybrid is the right answer, but I want to pressure test that with you guys

2014 Accord V6 Touring (any thoughts?)

Which car ?

me again. 2010 2dr honda accord, 122k miles for $5,800. just want a reliable first car, thoughts?

Want to buy an Accord, any suggestions?

2020/2021 Honda Accord LX - Tell Me About Your Likes/Dislikes

Compact - Midsize suv

best small/midsize suv?

Looking for a used (06-14) reliable compact/mid-size SUV

compact/mid size suv

Midsize SUV

Recommendations for midsized SUVs to look at

Compact to Mid-Size SUV

Small to mid-size suv suggestions?

Midsize vehicle for three kids

Mid-Size SUV

Just tried a Lotus Elise Cup 250, driving impressions !

Dan Neil reviews Lotus Emira: As Good As It Gets

Considering a Lotus Elise - USA

How affordable are Lotus Elises from the 2005-2012 model year?

Lotus Exige Sport Final Edition review: farewell, Exige

I wanna know everything you know about a 2005 Lotus Elise

My Lotus Evora Review

Lotus retail sales up 24% in best performance for a decade

2022 Lotus Emira Looks to Be One of the Brand's Best

PURCHASING A LOTUS — Need Tips + Advice.

Looking for a good rpg/action adventure with a good story and good characters

Deep long rpgs?

Looking for a story-focused RPG

Looking for a complex RPG

Fantasy games with an detailed and immersive world?

[WSIB] I am in search for a open world RPG that will keep me busy for hundreds of hours.

Open world game with huge map, lots of things to do, and great graphics

WSIB Feeling a bit of an rpg lull and want something exciting like old school BioWare with a engaging story that doesn’t take 100 hours to play.

WSIB: long, immersive games with high quality storytelling and writing

looking for an open-world rpg

[WSIB] A turn based strategy game that isn’t 4X

Turn-based strategy game

Turn-based strategy games

[WSIB] Small-scale, medieval, strategy game, featuring pikemen and cavalry

(WSIB) Turn-based ”wargaming” game

[WSIB] Turn Based Strategy games

WSIB if I want a strategy game for dummies

WSIB Strategic Rpg

[WSIB] Good offline strategy/(ish) games?

What are some good "smaller scale to control, but still feel large scale battle" tactical / strategy games?

Bullet Hell-Type Games: Atomicrops vs. I, Dracula: Genesis vs. Others?

WSIB if i want a completely story driven indie game but have already played undertale and oneshot (preferably similar to those 2)

Post apocalyptic enthusiast, Underrail or Atom RPG?

[SIB] Undermine or Atomicrops

WSIB if I like "Run into things, need to grow in power/special items to move further so I come back after unlocking said element" type of games.

Blsoodborne or Resident evil 2 ?

What should I buy? Animal Crossing: New Horizons or Doom: Eternal

[WSIB] Fast-paced top-down roguelikes?

[SIB] I Hate Running Backwards or Planetary Dustoff? Or something else?

SIB Nuclear Throne?

What can you recommend for minimizing pores?

I know you can’t get rid of pores but I’m wondering is there anyway to make them smaller? I use La Roche Posay products. They keep my acne mostly at bay but I feel like my pores are just so large. Part of it is genetic, but just wondering if there’s anything else I can do at home to help. Thanks!

OPEN PORES- WHAT TO DO? IS THERE ANY PRODUCT I CAN USE?

What skincare products have you used that helped with large pores?

What is the best thing to use to tighten pores on your face?

Can anyone tell me why my pores are so huge and what I can do to minimize them?

How to reduce pores.

Hey guys, how do I make my pores not look like this? Info in comments (deleted and reposted for an error in the title)

Pores reduction tips?

Advice for shrinking pores on and around nose?

[sun care] sunscreen that doesn’t irritate rosacea and perioral dermatitis

[Sun Care] Looking for sunscreen that doesn't irritate Rosacea

Sunscreen recommendations for rosacea

Looking for a sunscreen for my acne prone skin.

[Sun Care] looking for a sunscreen that works well for people with Eczema.

Desperate for a good sunscreen

Looking for a Daily Suncreen

I’ve tried them all and I still can’t find my holy grail for my dry rosacea skin. Any other recommendations?

Sunscreen, eczema and makeup, Help [Sun care]

[Sun Care] Help with not being able to use Sunscreen

How can i stop a really greasy face?

How to best defeat oily skin?

Is there any long-lasting solution for oily face?

Oily Face -&gt; Wash Face -&gt; More Oily

Extremely oily skin

Y’all know some sort of cream or product I can buy to make my face less greasy looking?

super oily face help needed

Oily Skin— please help!

Really oily skin

How to have less oily skin?

Adrian Krebs

Johannes Engler

Tavis Lochhead

The Barrage is the first to feature the AXIS Assist. They offer quick, one-handed manual assist opening and can be operated equally with either hand. Intended for Everyday use, our Barrage family has a standard clip type with a reversible tip-up clip position. The Mini Barrage 585 has a lanyard hole. Specifications: Designer: Osborne | Mechanism: AXIS-Assist | Action: Assisted-opening | Blade Steel: 154CM (58-61 HRC) | Blade Length: 2.91" (7.39cm) | Blade Thickness: 0.100" (2.54mm) | Open Length: 6.91" (17.55cm) | Closed Length: 4.00" (10.16cm) | Handle Thickness: 0.57" (14.48mm) | Weight: 3.40oz. (109.71g).

OutdoorGearLab

Built for precision with a design that has helped it maintain its top status for years, the Benchmade Mini-Barrage 585 has a blade that arrives razor-sharp, and its LifeSharp sharpening service sweetens the deal even further. If you cover shipping costs, Benchmade will return the edge to factory specifications throughout the life of the knife. The handle fits in the palm well and tucks easily into a pants pocket. Pocket clip carry is modular; you can wear it on either side. An assisted opening system, deployable by either hand, reliably pulls the blade to ready status. One can safely lock the blade in the closed position while carrying it in a pocket or purse.
The Mini-Barrage 585 is pricey, but you will undoubtedly realize its value over a long lifespan, especially with Benchmade's LifeSharp service. However, the initial investment may be too much if you are someone who easily misplaces items like this. Also, its slightly down-sized stature will be noticeable for heavy tasks and frequent usage. It is better than our other top award winner but is still a little more compact than ideal for super-extended use. Any bigger pocket knife will likely be too heavy to carry daily and everywhere. As long as you aren't using it for hours and hours a day and as long as you can keep track of it long enough to realize the investment, the Mini-Barrage earns our strongest endorsement. This is the knife we recommend most for everyday carry. 
Read more: Benchmade Mini-Barrage 585 review

Best for Most

amazon.com

VinnieNiZero

 Can we choke? Not really. I wouldn't suggest that this is very sharp for here. So to release, we'll pull on both sides of this access lock. So we'll pull this position and it is spring loaded

 Hello! Here I have a mini barrage from Benchmade. It's number is 585. This knife was sent to me for review. Let's take a look at it

 This knife was sent to me for review. Let's take a look at it. So these holes here and the emblem there, let's get that. You can see the emblem there

 Very forgiving belt clip. And there is a spring lock here. So this is in the open position. You're going to push down this way and push up for the locking position

Benchmade Mini Barrage 585 review

 Hello! Here I have a mini barrage from Benchmade. It's number is 585. This knife was sent to

 me for review. Let's take a look at it. So these holes here and the emblem there, let's

 get that. You can see the emblem there. There's a pocket clip either side. Knife tip up. Very

 forgiving belt clip. And there is a spring lock here. So this is in the open position.

 You're going to push down this way and push up for the locking position. And then so there's

 an access lock. Here's a thumb stud. You can see it is locked in place. It will not deploy.

 So this will go towards the jimping. Press down and pull. So it is very close to the jimping

 and it will open. I am very unfamiliar with Benchmade's Valox material. They also offer

 this in a G10. And this feels like a G10. But since I have no experience with the Valox,

 there is no way I can tell you what the huge difference is. So ambidextrous

 thumb studs. Let's see, can we do this? Thumb stud here. I'm holding it like that on the belt clip,

 sort of. Whoa! Super nice. Good edge. Good point. There's a clip on this. Very well

 sanded clip. And the user of this has not really done anything other than EDC it

 for the past 10 years. Very good edge retention. Incredible. Can we choke? Not really. I wouldn't

 suggest that this is very sharp for here. So to release, we'll pull on both sides of this access

 lock. So we'll pull this position and it is spring loaded. You can see that I'm letting go

 and there's the snap. So you will not be able to flick it closed. Let's see if we can do a reverse

 flick. So I guess thumb stud here. Not a lot of material. Nope. Nope. There we go.

 Huh. Well, I guess you need practice for that. Very gorgeous knife. Made in America. And there's a

 balance. Let's see. The balance is somewhere about right here. Let's check it out. Here? Maybe?

 Here? Maybe? Slightly? Nope. I didn't balance that. Just about where the access lock is.

 It's a beautiful grind. And really nice grip. I don't know how much larger.

 I don't know. My fingers just like slide in these grooves right here. What is this other side for?

 Oh, like box. Like to cut a box or to tape. Nice. Very ergonomic. Excellent.

 So from my limited research, I found this to be about $155 as the base from Benchmade.com.

 And they don't necessarily make this exact grind anymore, but they do still sell this and it goes

 up from $155. You want a very reliable quality knife. This is high recommendation. Thank you

  Other than the clip, the knife itself is rock solid. Great assisted opening mechanism.

Excellent Knife - Just Wish The Clip Was Stronger

 That way, it does not ever fall open on its own. I carry my barrage in my pocket often and usually don't lock the blade shut with the switch on the knife, but it's probably a good practice to do. I've never had a problem though.  I'm not a huge fan of the plasticy scales (sides of the handle) that come with the knife, but I'd much rather have a stellar blade and locking mechanism than worry about the feel of the handles

 The axis locking mechanism is superb and holds the blade firmly in place with very little wiggle. With a pull on the release mechanism the blade is easy to close, and the way the release is positioned, it ensures your fingers are away from the blade as it's closing. But be careful as with any good knife -- it is sharp!!  The axis-assist open works very reliably and swiftly. As you use the thumb stud to push the blade out of the knife, it crosses a threshold (of about a centimeter open) where the knife opens on its own and locks into place

Great pocket knife

 It has a hollow plastic design that no doubt was to save weight due to the steel liners inside. Other reviews have pointed out that you get a cheap feeling due to this. I agree thus 4 stars instead of 5. I would have liked a more rubberized solid grip even at the expense of more weight! Put this into the Can't Get Everything You Want bucket

Benchmade 585

Trusted knife designer Ernest Emerson learned “hard work [is] the secret ingredient to success,” a belief Kershaw Knives shares. Consequently, the two collaborated and produced E-Train, a folding trainer created to introduce safely the multi-function capabilities of the wave shaped opening feature that causes knives to spring alive with released blades. Military, rescue and law enforcement personnel who seek readiness and ease of use during emergencies insist on knives with wave shaped opening feature. However, only through repeated practice do users develop the confident intensity and skill required to operate such knives. E-Train, made for the hard work of practice drills, comes with bright blue G-10 front handle for easy identification and unsharpened 3Cr13 stainless steel blade for safe handling during reps and sets. Although highly affordable, E-Train’s value is unsurpassed according to outdoor adventurers, survivalists and all others wanting to increase their knife proficiency.

AARES Combatives Research

Hissatsu5

Knathan's Knives

 So let's get to it. [, Music, ], all right! So here it is all taken apart. So again i'll be changing the blue g10 scale. Here to aluminum and also creating a new retention ring for the back of the blade, also out of aluminum, so now that it's all taken apart, let's get to customizing this thing: 5650: [, Music, ], okay, [, Music, ], [, Music, ], [, Music, ], [, Music, ] this [ Music ] push is [ Music, ] foreign

36 ounces, so now that i've talked a little bit about the blade, let's get into what i'm going to be changing now, the client has sent this to me he's a supporter of the channel, which is awesome, and he wanted Me to customize this form, so first will be the scale i'll be getting rid of the blue g10 here and using some aluminum that way, it'll keep the weight down. Just like this g10 is. I don't want to make the knife much heavier. The retention ring here will also be made out of aluminum and then once everything is customized, i've noticed the blade here is stone washed, but everything else is not so once everything is finished, i'm going to give it a nice stone wash all the way around and That'S pretty much all the touches i will be doing to this e train, so i'm going to be taking this thing apart

 On the original scale, i gave it a nice stone wash just to match the uh, the new aluminum scale. It had a smooth finish and i just wanted it to match the blade since the blade. That was really the only thing that was stone washed and the client was saying he wanted everything to match. So that's what i did with the aluminum scale as well, and i think it just looks better and if it gets beat up again, the scratches won't be as noticeable and good thing with the aluminum scale

 I put this thing in my jeans and gave it a few test runs and it works really really well once you get it down, it even worked really well in my basketball shorts. So that's just a really really neat function. Overall, i just really like this blade for just being a trainer i'll just run some really quick specs on this thing, the trainer blade is a 3 cr13 blade, the blade length is 3 inches, the handle length is four and a half inches and with the retention Ring it's five and five eighths and the overall length of this thing is eight and seven eighths. It'S got a blue g10 handle and it's semi-grippy

Kershaw 6034 Emerson Trainer(E-Train)Karambit Pocket Knife/Customized(Knathan's Knives)

This is an easy fix. All you need to do is use a needle file (pictured here a cheap hobby diamond file) and make a small grove in the retention hole of the blade along the track that the ball in the frame lock follows. Took me less than 5 minutes, and probably could have been done without taking the blade out (though I did remove the blade to make it easier). A little bit goes a long way, and after a minor touch-up, it opens just fine with your thumb

This trainer is sturdy, well built, and attention is paid to a lot of the details that are missed on a lot of cheaper trainers. Everything operates smoothly, and all of the edges that might catch during training are rounded (this is not the case with cheaper trainers).

Excellent Trainer with one Adjustment

Hello youtube: this is asatsu five. Forgive me if i cough, i have kovid19. So that's interesting um, and this is a review over this training knife. This is the course shaw

 So that's interesting um, and this is a review over this training knife. This is the course shaw. Uh trainer, uh, corsair, emerson trainer. It'S i think it's called the e train or the model number 60 34 trainer, and so i'm getting interested in a smaller knife, defense stuff, it's more specifically a libre fighting method and so working with smaller knives, folding knives to explode and stuff

 You know you're trying to mimic that stress method by drawing this out quickly and getting it into action now. The reason why i want to review this knife is for its price. If you get a spiral, co, endura, training knife - i think it's going to be around 80 to 90 bucks, depending where you find it emerson. I think, cost a little bit more and um

Kershaw Emerson training knife

I bought this as a less-expensive alternative to the actual Emerson-branded trainers that Emerson sells, and you get what you pay for. Unfolded, the weight and general feel are nice, and the handle design is comfortable, and your index finger tucks neatly into the finger choil. (It's a nicer shape than that of my actual Mini CQC-7.) But I can't recommend this trainer, for two reasons:

) At the very least, the clip side needs to be anodized blue if they're going to stick with the one-piece metal design, but grips on both sides and a thinner liner on the clip side would be better.

2) The detent holds onto the blade so firmly that it can't be thumbed open. Adjusting the pivot screw to fix this introduces unacceptable levels of blade wobble. You either have to use two hands to open it, or rely on the wave feature as you draw it from a pocket. I wear hakama in the art that I bought this for, so I actually can make use of the wave feature, but if you're from a school that wears judogi-style uniforms (judo, BJJ, karate, TKD, and the like), you're out of luck

Benchmade 585 Mini Barrage vs Kershaw E-Train CQC-6T Emerson Trainer Knife

Reviews by Topic

Blade

Weight

QUICK QUESTION!

You might also like