Hiking Boots/Shoes Recommendations?

Hiking boot recommendations?

Any recommendations for women's hiking shoes?

[Request] Hiking/outdoorsy style shoes that can handle lots of walking on concrete

Cold and wet weather hiking boots recommendations?

I am in need of a new pair of trail/hiking boots.

Hiking Boots for heavy use during the summer

Good pair of hiking shoes?

[Request] waterproof hiking shoes

[request] - Good quality walking shoes.

Hello Redditors. I'm in search of a classy yet extremely durable pair of hiking boots to take backpacking around the world for 12+ months with.

Hiking boots recommendations

Men's three season "urban hiker" (like Merrell MOAB but longer lasting)

BIFL Hiking boots for women

Hiking boots with good traction and can stand up to abuse.

Looking for a good pair of shoes for my weird feet

Request - Hiking Sandals

Request: Hiking Boots

Comfortable and cushiony shoes for walking on pavement 10KM/couple hours a day (UK)

Hiking sandals that last?

[Request] Powerful dishwasher with sanitize function?

I want the best god damned dishwasher money can buy.

Looking for the best, easiest to operate, cheapest dishwasher - Recommendation?

[Request] Best countertop dishwasher for reasonable price?

Can anyone recommend a good dishwasher?

Countertop/Portable Dishwasher

[Request] Dishwasher &lt;$1k Australian with QOL features and low water use

Dishwasher for Second Home

My friend bought a house with this KichenAid dishwasher from 1974. He says it works better than any of the other ones he has owned. He just has to convince his wife not to replace it.

What's a good Panel ready dishwasher under $1k?

Best socket set on the market $100-$150

[Request] Socket wrenches

I need a recommendation for a tool set that should last a lifetime. [Request]

Looking for a Mechanics tool set.

23 years later; GM Goodwrench socket set.

A Starter/Lifetime Tool set

Basic screwdriver set needed

Mechanic Tools that are BIFL

Trying to fill a tool roll for my truck and would like input on BFL tools like wrenches, pliers, socket sets, etc.

BIFL: Mastercraft ratchet set with lifetime warranty. Got it at 14, im 31. Went thru more abuse than you think!

Looking to upgrade my home hand tools

Was told to post this here. Husky 270pc toolset from Home Depot for $99, normally $199. Lifetime warranty too

[Request] Ratchet/Wrench/Etc tool set for home/bicycle/general use

Thoughts on a Honda Accord V6 2007?

2010 Honda Accord worth the buy?

Thoughts on a 2008 Honda accord v6 coupe EX-L?

2014 honda accord ??

After an initial round of research it seems like Honda Accord Hybrid is the right answer, but I want to pressure test that with you guys

2014 Accord V6 Touring (any thoughts?)

Which car ?

me again. 2010 2dr honda accord, 122k miles for $5,800. just want a reliable first car, thoughts?

Want to buy an Accord, any suggestions?

2020/2021 Honda Accord LX - Tell Me About Your Likes/Dislikes

Compact - Midsize suv

best small/midsize suv?

Looking for a used (06-14) reliable compact/mid-size SUV

compact/mid size suv

Midsize SUV

Recommendations for midsized SUVs to look at

Compact to Mid-Size SUV

Small to mid-size suv suggestions?

Midsize vehicle for three kids

Mid-Size SUV

Just tried a Lotus Elise Cup 250, driving impressions !

Dan Neil reviews Lotus Emira: As Good As It Gets

Considering a Lotus Elise - USA

How affordable are Lotus Elises from the 2005-2012 model year?

Lotus Exige Sport Final Edition review: farewell, Exige

I wanna know everything you know about a 2005 Lotus Elise

My Lotus Evora Review

Lotus retail sales up 24% in best performance for a decade

2022 Lotus Emira Looks to Be One of the Brand's Best

PURCHASING A LOTUS — Need Tips + Advice.

Looking for a good rpg/action adventure with a good story and good characters

Deep long rpgs?

Looking for a story-focused RPG

Looking for a complex RPG

Fantasy games with an detailed and immersive world?

[WSIB] I am in search for a open world RPG that will keep me busy for hundreds of hours.

Open world game with huge map, lots of things to do, and great graphics

WSIB Feeling a bit of an rpg lull and want something exciting like old school BioWare with a engaging story that doesn’t take 100 hours to play.

WSIB: long, immersive games with high quality storytelling and writing

looking for an open-world rpg

[WSIB] A turn based strategy game that isn’t 4X

Turn-based strategy game

Turn-based strategy games

[WSIB] Small-scale, medieval, strategy game, featuring pikemen and cavalry

(WSIB) Turn-based ”wargaming” game

[WSIB] Turn Based Strategy games

WSIB if I want a strategy game for dummies

WSIB Strategic Rpg

[WSIB] Good offline strategy/(ish) games?

What are some good "smaller scale to control, but still feel large scale battle" tactical / strategy games?

Bullet Hell-Type Games: Atomicrops vs. I, Dracula: Genesis vs. Others?

WSIB if i want a completely story driven indie game but have already played undertale and oneshot (preferably similar to those 2)

Post apocalyptic enthusiast, Underrail or Atom RPG?

[SIB] Undermine or Atomicrops

WSIB if I like "Run into things, need to grow in power/special items to move further so I come back after unlocking said element" type of games.

Blsoodborne or Resident evil 2 ?

What should I buy? Animal Crossing: New Horizons or Doom: Eternal

[WSIB] Fast-paced top-down roguelikes?

[SIB] I Hate Running Backwards or Planetary Dustoff? Or something else?

SIB Nuclear Throne?

What can you recommend for minimizing pores?

I know you can’t get rid of pores but I’m wondering is there anyway to make them smaller? I use La Roche Posay products. They keep my acne mostly at bay but I feel like my pores are just so large. Part of it is genetic, but just wondering if there’s anything else I can do at home to help. Thanks!

OPEN PORES- WHAT TO DO? IS THERE ANY PRODUCT I CAN USE?

What skincare products have you used that helped with large pores?

What is the best thing to use to tighten pores on your face?

Can anyone tell me why my pores are so huge and what I can do to minimize them?

How to reduce pores.

Hey guys, how do I make my pores not look like this? Info in comments (deleted and reposted for an error in the title)

Pores reduction tips?

Advice for shrinking pores on and around nose?

[sun care] sunscreen that doesn’t irritate rosacea and perioral dermatitis

[Sun Care] Looking for sunscreen that doesn't irritate Rosacea

Sunscreen recommendations for rosacea

Looking for a sunscreen for my acne prone skin.

[Sun Care] looking for a sunscreen that works well for people with Eczema.

Desperate for a good sunscreen

Looking for a Daily Suncreen

I’ve tried them all and I still can’t find my holy grail for my dry rosacea skin. Any other recommendations?

Sunscreen, eczema and makeup, Help [Sun care]

[Sun Care] Help with not being able to use Sunscreen

How can i stop a really greasy face?

How to best defeat oily skin?

Is there any long-lasting solution for oily face?

Oily Face -&gt; Wash Face -&gt; More Oily

Extremely oily skin

Y’all know some sort of cream or product I can buy to make my face less greasy looking?

super oily face help needed

Oily Skin— please help!

Really oily skin

How to have less oily skin?

Adrian Krebs

Johannes Engler

Tavis Lochhead

amazon.com

ruiraptor

3D print passion

r/ErgoMechKeyboards

r/prusa3d

r/3Dprinting

Any filament bundled with printers is going to be around 10€/kg in value if you are lucky. Better to buy a fresh roll rather than get confused why old wet filament of the cheapest blend prints like poop and replace your entire extruder trying to diagnose the problem.

Hey guys! 
I am following this community for a while now and I am looking for your help. I would really appreciate it. 

Here is a list of a few printers that I think look pretty good. I just want to know which one is the best or if everyone isn’t the best choice:

- Creality Ender 3 v2 (used): 200€ with extra upgrade extruder 

- Anycubic Mega SE (new): 180€ with 1kg PLA

- Anycubic Mega Zero 2.0 (used): 100€

- Anycubic i3 Mega S (new): 215€ with 1kg PLA

- Anycubic Mega X (new SALE): 240€ with 1kg PLA

- Artillery Genius (used): 200€ with 3kg PLA

- Sovol SV01 (used): 235€ with a few upgrades like


I would really appreciate your help, because I am a little bit lost. This printer would be my first one and I try to pay as less as possible. 
Also I am open for other recommendations:) 
Please let me know if you need any further informations for this offers. (All new Anycubic printer are officially from the Anycubic site with a Valentine’s Day sale)

<div class="md">Hey guys! 
I am following this community for a while now and I am looking for your help. I would really appreciate it. 

Here is a list of a few printers that I think look pretty good. I just want to know which one is the best or if everyone isn’t the best choice:

<ul>
<li>Creality Ender 3 v2 (used): 200€ with extra upgrade extruder </li>
<li>Anycubic Mega SE (new): 180€ with 1kg PLA</li>
<li>Anycubic Mega Zero 2.0 (used): 100€</li>
<li>Anycubic i3 Mega S (new): 215€ with 1kg PLA</li>
<li>Anycubic Mega X (new SALE): 240€ with 1kg PLA</li>
<li>Artillery Genius (used): 200€ with 3kg PLA</li>
<li>Sovol SV01 (used): 235€ with a few upgrades like</li>
</ul>

I would really appreciate your help, because I am a little bit lost. This printer would be my first one and I try to pay as less as possible. 
Also I am open for other recommendations:) 
Please let me know if you need any further informations for this offers. (All new Anycubic printer are officially from the Anycubic site with a Valentine’s Day sale)

EDIT: I am living in Germany
</div>

First Printer for beginner

 We have to adjust the leveling knobs until we feel the nozzle touch the paper, then we do the same. For the second corner, this needs to be done on all corners and as many times as needed until they are all at the same height, [, Music ]. The icons on this menu are also in the wrong order, since they don't match the corner where the nozzle goes to [, Music ]. The fifth point is just to confirm the center

 There is a belt connecting the two lead screws to keep them, always in sync: okay, let's start with the assembly, and the first step is to attach the top half to the base on the two slots, but first move the heat bet away and remove all the Tape that is, securing the connectors next place, the top half on the base be careful with the connector on the left side, [, Music ]. Next, we need to access the screws on the bottom side and tighten them. There are two on each side when done make sure that the vertical profiles are squared with the base [ Music ]. Now we can connect all the cables there's one for the right, z, stepper, motor and one for the left, z, stepper motor

 The big fan attached to the bottom panel is the one that will cool down the drivers. This fan is 80 by 80 millimeters. All the wires are nicely attached and secured with hot glue and the ones that connect to the screw type connectors are crimped with ferrules, which is a good thing. The power supply is a 24 volts and 8

 [, Music, ]. Last but not least, is the vase looks like it printed. Fine throughout its height, which shows no problem with the z-axis, and the vase printed with flexible filament also turned out. Okay, as always, we uploaded our slicer profile on our patreon page, so check the link below in the video description so to wrap things up

 Turning the set screw will only increase or decrease the pressure of that spring and therefore making the wheels grip stronger or weaker on both lead screw nuts. There is an old ham type system to prevent the z-wobbling at the top. There is a belt connecting the two lead screws to keep them, always in sync: okay, let's start with the assembly, and the first step is to attach the top half to the base on the two slots, but first move the heat bet away and remove all the Tape that is, securing the connectors next place, the top half on the base be careful with the connector on the left side, [, Music ]. Next, we need to access the screws on the bottom side and tighten them

Artillery GENIUS PRO - Detailed Assembly & Full Review

Hello and welcome to 3d print passion today i like to show you with the adleri genius pro like already existing in the genius classic version. There is a little back inside with some tools and the usb stick. Some spare parts cables a nozzle, a power cable, and here we see the portal of the 3d printer, and i already can see one two three improvements to the old one, and here we have the printer base the screws are already inside. This will make it much more easier for beginners

 So let's put the portal inside the case and i'd like to show you something where you should take care about it um here there is a little socket and you need to take care about that. It will be correctly fitted in and will not be destroyed. Yeah, let's quickly fit the screws. Let'S start with the difficult part we need to plug in the wires into the sockets one, two, three, that's it! It'S mounted nothing more to do

 Some spare parts cables a nozzle, a power cable, and here we see the portal of the 3d printer, and i already can see one two three improvements to the old one, and here we have the printer base the screws are already inside. This will make it much more easier for beginners. So that's, in my opinion, very utterly. We like they make it so easy for beginners to install this printer and yeah

Artillery Genius Pro - Budget King? Review

notebookcheck.net

shopify

pcmag.com

r/Leathercraft

r/buildapcsales

I am a beginner in the 3D printing arena. I selected this printer based on the price, quality of print, spare parts availability and their price. Assembling was time taking but easy task. I referred several you tube videos

Great printer. Bad customer support.

 It really seems like its an absolute workhorse at the entry-level without any crazy drawbacks, and solid for the price. (looking at around $280~ on Amazon, which I'm comfortable with, plus its a 'reputable seller' from what I've read.)

Welcome back to another purchase megathread!

For a link to last month's post, see [here](https://www.reddit.com/r/3Dprinting/comments/pz948w/purchase_advice_megathread_what_to_buy_who_to_buy/). Top comment was [/u/Sausage54](https://www.reddit.com/u/Sausage54/)'s 2021 Printer list [here](https://www.reddit.com/r/3Dprinting/comments/pz948w/comment/hez8ul2/).

This thread is meant to conglomerate purchase advice for both newcomers and people looking for additional machines. Keeping this discussion to one thread means less searching should anyone have questions that may already have been answered here, as well as more visibility to inquiries in general, as comments made here will be visible for the entire month stuck to the top of the sub, and then linked to in the next month's thread.

If you are new to 3D printing, and are unsure of what to ask, try to include the following in your posts as a minimum:

* Your budget, set at a numeric amount. Saying "cheap," or "money is not a problem" is not an answer people can do much with. 3D printers can cost $100, they can cost $10,000,000, and anywhere in between. A rough idea of what you're looking for is essential to figuring out anything else.
* Your country of residence.
* If you are willing to build the printer from a kit, and what your level of experience is with electronic maintenance and construction if so.
* What you wish to do with the printer.
* Any extenuating circumstances that would restrict you from using machines that would otherwise fit your needs (limited space for the printer, enclosure requirement, must be purchased through educational intermediary, etc).

While this is by no means an exhaustive list of what can be included in your posts, these questions should help paint enough of a picture to get started. Don't be afraid to ask more questions, and never worry about asking too many. The people posting in this thread are here because they want to give advice, and any questions you have answered may be useful to others later on, when they read through this thread looking for answers of their own. Everyone here was new once, so chances are whoever is replying to you has a good idea of how you feel currently.

Additionally, a quick word on print quality: Most FDM/FFF (that is, filament based) printers are capable of approximately the same tolerances and print appearance, as the biggest limiting factor is in the nature of extruded plastic. **Asking if a machine has "good prints," or saying "I don't expect the best quality for $xxx" isn't actually relevant for the most part** with regards to these machines. Should you need additional detail and higher tolerances, you may want to explore SLA, DLP, and other photoresin options, as those *do* offer an increase in overall quality. If you are interested in resin machines, make sure you are aware of [how to use them safely](https://www.reddit.com/r/3DPrinting/wiki/resinprinting#wiki_safety). For these safety reasons we don't usually recommend a resin printer as someone's first printer.

As always, if you're a newcomer to this community, welcome. If you're a regular, welcome back.

<div class="md">Welcome back to another purchase megathread!

For a link to last month&#39;s post, see <a href="https://www.reddit.com/r/3Dprinting/comments/pz948w/purchase_advice_megathread_what_to_buy_who_to_buy/">here</a>. Top comment was <a href="https://www.reddit.com/u/Sausage54/">/u/Sausage54</a>&#39;s 2021 Printer list <a href="https://www.reddit.com/r/3Dprinting/comments/pz948w/comment/hez8ul2/">here</a>.

This thread is meant to conglomerate purchase advice for both newcomers and people looking for additional machines. Keeping this discussion to one thread means less searching should anyone have questions that may already have been answered here, as well as more visibility to inquiries in general, as comments made here will be visible for the entire month stuck to the top of the sub, and then linked to in the next month&#39;s thread.

If you are new to 3D printing, and are unsure of what to ask, try to include the following in your posts as a minimum:

<ul>
<li>Your budget, set at a numeric amount. Saying &quot;cheap,&quot; or &quot;money is not a problem&quot; is not an answer people can do much with. 3D printers can cost $100, they can cost $10,000,000, and anywhere in between. A rough idea of what you&#39;re looking for is essential to figuring out anything else.</li>
<li>Your country of residence.</li>
<li>If you are willing to build the printer from a kit, and what your level of experience is with electronic maintenance and construction if so.</li>
<li>What you wish to do with the printer.</li>
<li>Any extenuating circumstances that would restrict you from using machines that would otherwise fit your needs (limited space for the printer, enclosure requirement, must be purchased through educational intermediary, etc).</li>
</ul>

While this is by no means an exhaustive list of what can be included in your posts, these questions should help paint enough of a picture to get started. Don&#39;t be afraid to ask more questions, and never worry about asking too many. The people posting in this thread are here because they want to give advice, and any questions you have answered may be useful to others later on, when they read through this thread looking for answers of their own. Everyone here was new once, so chances are whoever is replying to you has a good idea of how you feel currently.

Additionally, a quick word on print quality: Most FDM/FFF (that is, filament based) printers are capable of approximately the same tolerances and print appearance, as the biggest limiting factor is in the nature of extruded plastic. Asking if a machine has &quot;good prints,&quot; or saying &quot;I don&#39;t expect the best quality for $xxx&quot; isn&#39;t actually relevant for the most part with regards to these machines. Should you need additional detail and higher tolerances, you may want to explore SLA, DLP, and other photoresin options, as those do offer an increase in overall quality. If you are interested in resin machines, make sure you are aware of <a href="https://www.reddit.com/r/3DPrinting/wiki/resinprinting#wiki_safety">how to use them safely</a>. For these safety reasons we don&#39;t usually recommend a resin printer as someone&#39;s first printer.

As always, if you&#39;re a newcomer to this community, welcome. If you&#39;re a regular, welcome back.
</div>

Purchase Advice Megathread - November

 And for the price they are sold for, I don't think there is a better value on the 3D printing market right now. I would rather have 3-4 of these bad boys than a single Prusa any day of the week.

Best Value in 3D Printing With Incredible Print Quality

Artillery Genius Pro vs Creality Ender 3 V2

Reviews by Topic

Reliability

QUICK QUESTION!

You might also like