Kingroon KP3S

is linear rail, belt tensioners, and some additional cooling, but at roughly a hundred and eighty dollars I feel like it is a really good value, Can p...

Okay/\s/those were my negative thoughts about the Kp3s/\s/ By the way, there are great designs for all/\s/these cons for example, the design has made/...

If you get the budget better buy a prusa mini or a kingroon kp3s at half the price. The creality printers are great machines but require a lot of maintenance, as you probably noticed that the vast majority of troubleshooting threads are about ender 3, and it might require some skilled hands to solve the issues it comes with.

This printer has a niche for me it repeatedly prints 10 minutes parts very small. However a few times has frozen on me and it could have potential for parts that last 3-4 hours but because I had it freeze intermittently about 10 times so far in two weeks really makes it unreliable. Even with that I ...

Elegoo Neptune 2 is a good choice that one other guy recommended,

but also try the Kingroon KP3S 3.0. It has a smaller size but is pretty capable.

This product is a great concept. I really enjoy the linear rail design and quiet operation. overall this would be a great product with five stars. However there was one major critical quality control issue with the one I received. The build plate was clearly not flat. I gave the seller a chance to r...

If controlling cost is a priority, and you're curious about exploring 3d printing as a hobby itself, I can recommend the kingroon kp3s. Direct drive, silent steppers, linear rails, and an easily flashable main board for 180 ish.

Had this for a few days. Could not get it working the first day because the coupler was defective and even with the tension screws fully removed the opening was nowhere near wide enough for anything to fit into it. Annoyed but later I tried to just hammer it in place anyways and surprisingly that wo...

I was hoping to keep this on my desk. But after using it for a short time it became clear that the "Sound Off Function" touted in the title is an outright lie. The hot end fan always runs and is very noisy. This printer is louder at idle then any of my other printers are actively printing. The print...

Printed first row of filament flawlessly. However, upon trying to load the next filament extruder dies on me. . I was unable to load another spool.It appears that the extruder motor is not turning for some reason. Tried turning off and on, but no change. Hopefully this was just a flawed unit. The pr...