Cooler Master NR200P Max

Gutted my NZXT H200 to transplant into this Cooler Master NR200P. Made a substantial bracket to hold an ATX power supply, unlike the usual cable tie/velcro bodge jobs that we've all seen -. \- Ryzen 5 3600 with Be Quiet Dark Rock 4 cooler and 2x Arctic P12's (intake from rear).

The NR200P Max is an outstanding design and a great successor to the NR200P. The back panel of the chassis has been completely redesigned and the case is entirely intended to be used with the included 280mm AIO Liquid Cooler and a vertically mounted GPU. Let me start by saying that it is nice to hav...

Overall, the little dragon runs relatively cool. At idle, temps were between 28 and 32C.

Love the case. Big fan of the NR200 line and not the first one I've built in. The case does not feel cheap in any way and I had plenty of cooling space to fit an 12900k with a kraken x52 with 6 fans, 2 NVMe drives and 2 SSDs along with an EVGA RTX 3070 XC. I docked 1 star because the issue that almo...

After much research I found the inverted mod, also had to file down the Arctic block bracket to fit. Overall very very pleased however I need to rework some cable management and plan to add a few case fans though temps seem to make me think I don't really need more fans. I've also flipped the GPU face plate around so it's not upside down. • Case: Cooler Master NR200P.

This case is so popular it's always out of stock. I finally got my hands on the NR200P and was excited to use the glass to show off my build a little. I've never had a case with glass yet (it's been a while). However, after doing a lot of research, I realized that all the great features of this case...

Case - Cooler Master NR200P (White) - 7800. Definitely the star of the show, since this is first thing people notice. I know I paid a bit more than what I should've, but man look at that white model.

4 stars only because there is no way to screw in the side panels, and they like to fall off when the case is tilted sideways. The positives: Was able to fit an Asus Prime B250M-A mATX motherboard in here (10.24 x 2.03 x 10.63 inches). Had to forego the I/O shield as well as relocate the external pow...

So finally, I took the plunge and ordered a NR200P Max. Two days, after I finally managed to build that one, the H2O came out. So I had to order it, too as it was my favorite case which I had an eye on for a while. I used almost all components from the CM NR200P and put them inside the A4.

Great case! Easy to build in, accommodates lots of different hardware, and excellent cooling! I bought the NR200P vs the NR200 specifically to vertically mount my GPU with a bottom mounted AIO radiator based on Cooler Master product photos I saw of that configuration. However, only after purchasing ...