TP-Link Deco Mesh Router System vs TP-Link Deco X60 AX3000

The reason I know it's wireless is that connecting directly to the switch via Ethernet (which bypasses the Deco completely) returns expected speeds. Rebooting the Deco is the only solution I've found, but that's not sustainable during the mid-day. I guess I'm just old school. But I completely dislike these newer routers forcing you to use a mobile app to configure them

Update #3: Success, FINALLY! Critical step to get this mesh system to work: Once installed, go to the Deco app -> Settings -> Advanced -> IPv6 -> Enable -> Reboot the Deco system [Ignore the following step if you're setting up for the first time] Then, "Forget Network" on all your devices that had been on this Deco Mesh network, then re-add all your devices to Deco Network, then restart all your devices (unplug, wait 30-sec, plug in and restart.) Lastly, confirm IPv6 is enabled in Deco app (same steps as above.) Check speeds with your phone or laptop using Speedtest or Fast(dot)com The steps above finally resolved the random disconnects and slowness, including my slow connections for web TVs. The connection speed is at least 10x higher and Netflix loads much quicker and with HD or 4k resolution! I was literally going to Factory Reset the Deco system and return it

I had to do a factory reset multiple times, each time with the same result. I finally opted to exit the app and pack it all up, but once I exited the app, my device connected. I followed through with connecting the other two units without a hitch, and wifi speeds in the home that were previously in the 10mb range are now right at 50mb. A definite improvement! My second problem arose when attempting to connect my smart air conditioner, which only operates on the 2

Now they cover up to 650m2 home, they also are compatible with the Amazon Alexa device, so they will work with that and extremely easy to set up as I ...

For example, her devices do not have access to the internet between 10pm and 10am. Her profile is set to 2 hours a day. She would attempt to get online at 10am and insights would show multiple hours used and wouldn't let her online. I would have to increase the daily limit to allow her to get online

So once the TP-Link account is set up you then need to connect any of the x60 unit to your modem and then turn it all on. So turn the modem on first, ...