Hiking Boots/Shoes Recommendations?

Hiking boot recommendations?

Any recommendations for women's hiking shoes?

[Request] Hiking/outdoorsy style shoes that can handle lots of walking on concrete

Cold and wet weather hiking boots recommendations?

I am in need of a new pair of trail/hiking boots.

Hiking Boots for heavy use during the summer

Good pair of hiking shoes?

[Request] waterproof hiking shoes

[request] - Good quality walking shoes.

Hello Redditors. I'm in search of a classy yet extremely durable pair of hiking boots to take backpacking around the world for 12+ months with.

Hiking boots recommendations

Men's three season "urban hiker" (like Merrell MOAB but longer lasting)

BIFL Hiking boots for women

Hiking boots with good traction and can stand up to abuse.

Looking for a good pair of shoes for my weird feet

Request - Hiking Sandals

Request: Hiking Boots

Comfortable and cushiony shoes for walking on pavement 10KM/couple hours a day (UK)

Hiking sandals that last?

[Request] Powerful dishwasher with sanitize function?

I want the best god damned dishwasher money can buy.

Looking for the best, easiest to operate, cheapest dishwasher - Recommendation?

[Request] Best countertop dishwasher for reasonable price?

Can anyone recommend a good dishwasher?

Countertop/Portable Dishwasher

[Request] Dishwasher &lt;$1k Australian with QOL features and low water use

Dishwasher for Second Home

My friend bought a house with this KichenAid dishwasher from 1974. He says it works better than any of the other ones he has owned. He just has to convince his wife not to replace it.

What's a good Panel ready dishwasher under $1k?

Best socket set on the market $100-$150

[Request] Socket wrenches

I need a recommendation for a tool set that should last a lifetime. [Request]

Looking for a Mechanics tool set.

23 years later; GM Goodwrench socket set.

A Starter/Lifetime Tool set

Basic screwdriver set needed

Mechanic Tools that are BIFL

Trying to fill a tool roll for my truck and would like input on BFL tools like wrenches, pliers, socket sets, etc.

BIFL: Mastercraft ratchet set with lifetime warranty. Got it at 14, im 31. Went thru more abuse than you think!

Looking to upgrade my home hand tools

Was told to post this here. Husky 270pc toolset from Home Depot for $99, normally $199. Lifetime warranty too

[Request] Ratchet/Wrench/Etc tool set for home/bicycle/general use

Thoughts on a Honda Accord V6 2007?

2010 Honda Accord worth the buy?

Thoughts on a 2008 Honda accord v6 coupe EX-L?

2014 honda accord ??

After an initial round of research it seems like Honda Accord Hybrid is the right answer, but I want to pressure test that with you guys

2014 Accord V6 Touring (any thoughts?)

Which car ?

me again. 2010 2dr honda accord, 122k miles for $5,800. just want a reliable first car, thoughts?

Want to buy an Accord, any suggestions?

2020/2021 Honda Accord LX - Tell Me About Your Likes/Dislikes

Compact - Midsize suv

best small/midsize suv?

Looking for a used (06-14) reliable compact/mid-size SUV

compact/mid size suv

Midsize SUV

Recommendations for midsized SUVs to look at

Compact to Mid-Size SUV

Small to mid-size suv suggestions?

Midsize vehicle for three kids

Mid-Size SUV

Just tried a Lotus Elise Cup 250, driving impressions !

Dan Neil reviews Lotus Emira: As Good As It Gets

Considering a Lotus Elise - USA

How affordable are Lotus Elises from the 2005-2012 model year?

Lotus Exige Sport Final Edition review: farewell, Exige

I wanna know everything you know about a 2005 Lotus Elise

My Lotus Evora Review

Lotus retail sales up 24% in best performance for a decade

2022 Lotus Emira Looks to Be One of the Brand's Best

PURCHASING A LOTUS — Need Tips + Advice.

Looking for a good rpg/action adventure with a good story and good characters

Deep long rpgs?

Looking for a story-focused RPG

Looking for a complex RPG

Fantasy games with an detailed and immersive world?

[WSIB] I am in search for a open world RPG that will keep me busy for hundreds of hours.

Open world game with huge map, lots of things to do, and great graphics

WSIB Feeling a bit of an rpg lull and want something exciting like old school BioWare with a engaging story that doesn’t take 100 hours to play.

WSIB: long, immersive games with high quality storytelling and writing

looking for an open-world rpg

[WSIB] A turn based strategy game that isn’t 4X

Turn-based strategy game

Turn-based strategy games

[WSIB] Small-scale, medieval, strategy game, featuring pikemen and cavalry

(WSIB) Turn-based ”wargaming” game

[WSIB] Turn Based Strategy games

WSIB if I want a strategy game for dummies

WSIB Strategic Rpg

[WSIB] Good offline strategy/(ish) games?

What are some good "smaller scale to control, but still feel large scale battle" tactical / strategy games?

Bullet Hell-Type Games: Atomicrops vs. I, Dracula: Genesis vs. Others?

WSIB if i want a completely story driven indie game but have already played undertale and oneshot (preferably similar to those 2)

Post apocalyptic enthusiast, Underrail or Atom RPG?

[SIB] Undermine or Atomicrops

WSIB if I like "Run into things, need to grow in power/special items to move further so I come back after unlocking said element" type of games.

Blsoodborne or Resident evil 2 ?

What should I buy? Animal Crossing: New Horizons or Doom: Eternal

[WSIB] Fast-paced top-down roguelikes?

[SIB] I Hate Running Backwards or Planetary Dustoff? Or something else?

SIB Nuclear Throne?

What can you recommend for minimizing pores?

I know you can’t get rid of pores but I’m wondering is there anyway to make them smaller? I use La Roche Posay products. They keep my acne mostly at bay but I feel like my pores are just so large. Part of it is genetic, but just wondering if there’s anything else I can do at home to help. Thanks!

OPEN PORES- WHAT TO DO? IS THERE ANY PRODUCT I CAN USE?

What skincare products have you used that helped with large pores?

What is the best thing to use to tighten pores on your face?

Can anyone tell me why my pores are so huge and what I can do to minimize them?

How to reduce pores.

Hey guys, how do I make my pores not look like this? Info in comments (deleted and reposted for an error in the title)

Pores reduction tips?

Advice for shrinking pores on and around nose?

[sun care] sunscreen that doesn’t irritate rosacea and perioral dermatitis

[Sun Care] Looking for sunscreen that doesn't irritate Rosacea

Sunscreen recommendations for rosacea

Looking for a sunscreen for my acne prone skin.

[Sun Care] looking for a sunscreen that works well for people with Eczema.

Desperate for a good sunscreen

Looking for a Daily Suncreen

I’ve tried them all and I still can’t find my holy grail for my dry rosacea skin. Any other recommendations?

Sunscreen, eczema and makeup, Help [Sun care]

[Sun Care] Help with not being able to use Sunscreen

How can i stop a really greasy face?

How to best defeat oily skin?

Is there any long-lasting solution for oily face?

Oily Face -&gt; Wash Face -&gt; More Oily

Extremely oily skin

Y’all know some sort of cream or product I can buy to make my face less greasy looking?

super oily face help needed

Oily Skin— please help!

Really oily skin

How to have less oily skin?

Adrian Krebs

Johannes Engler

Tavis Lochhead

Specifications Manufacture Part Number: PC-O11DW Case Type: ATX Mid Tower Color: White Material: Front: Tempered Glass+Aluminum Side: Tempered Glass Body: 0.8mm SECC M/B Type: EATX, ATX, MicroATX Drive Bays: 6 Internal: 2x 3.5" HDD, 4x 2.5" SSD Expansion Slots: 8 Cooling System: Top: 3x 120mm or 2x 140mm Fan Vents (Fans not included) Side: 3x 120mm Fan Vents (Fans not included) Bottom: 3x 120mm Fan Vents (Fans not included) Radiator Support: 120x 360mm or 120x 240mm or 140x 280mm Side Windows: Yes Front I/O Panel: 1x USB3.1 Type-C Port, 2x USB 3.0 Ports, HD Audio Maximum Compatibility: Maximum VGA Card Length: 420 mm Maximum VGA Card Height: 159 mm Maximum CPU Cooler Height: 155 mm Power Supply: N/A Dimensions (WxDxH): 272.0 x 445.0 x 446.0 mm.

amazon.com

pcmag.com

LIAN LI

r/buildapc

r/pcmasterrace

r/IndianGaming

r/buildapcsales

 With the O11D EVO, Lian Li hopes to simplify the PC building experience while offering a wide array of configurations that displays and cools the PC in the best fashion possible.

 Its design has been inspired and improved upon the original vertical kit for the O11D. The kit's mounting location has been elevated, leaving up to 50mm of clearance for bottom radiators and fans, and can be raised up even further to allow up to 90mm of clearance for thicker radiators and fans. And for users who prefer horizontally mounted GPUs, the O11D EVO comes equipped with the GB001 anti-sag bracket, which is functional in both default and reverse layout. In the main chamber of the O11D EVO, even the top and bottom mounting brackets have been well thought out

 As a complete redesign of the classic O11 Dynamic, the O11D EVO is a combination of innovations inspired by the O11D XL, O11D MINI, O11 Air MINI, and of course, user feedback. Starting from the outside, the mesh design at the top and rear of the case has been updated to provide wider areas for air to pass through while still offering adequate dust filtration. The new pin mounting mechanism for the side panels means they can be removed without the need to first remove the top panel, eliminating an unnecessary step when trying to access the inside of the case. Additionally, both glass panels can be locked in place to prevent them from falling out during transport

LIAN LI - O11 Dynamic EVO In-Depth Overview

  Third - You REALLY need to plan out your fans for intake/exhaust because if you go with an AIO cooler as I did, it really changes things up. And with how the case air flows it can make a huge difference. Not only that, but you also need to plan out your wiring because holy smokes you have ZERO room for error on this. Sloppy wiring and cable management will literally kill the look of any build you put in this case

 For now, I have just one 120mm fan set in there and not even screwed down. It works, it looks okay, but I am ultimately disappointed with this. Not at any fault of the case, more on myself for not thinking everything through.  Specs: Case: Lian Li PC-O11DX w/ custom painted pieces CPU: Ryzen 3800x OC to 4

 PLAN PLAN PLAN!!!  One thing I really wish I would have planned better is the motherboard. My USB 3.0 connector is at the bottom (as it is on most boards) but this makes it so that you cannot put in the fans on the lower panel. This really upset me because I was counting on the two fans bringing in fresh air to the GPU from underneath

Amazing Case - Read Full Review

After my the thermals on my Enthoo Evolve case got to the point where I was running the fans at full blast all the time after upgrading the GPU and CPU, it was time to get a new case. If you that follow computer tech-tubers, this case has won several case of the year awards from Hardware Canucks. Gamer's Nexus, ect.

 Build quality is amazing. Everything feels very solid (no paper-thin sheet metal), cable grommets to route everything 2. Lots of space for cable management behind the motherboard and space above the motherboard. This made the build experience very smooth since one of the most frustrating things about a build is routing the CPU power connector and top fans

.  Positives: 1. Build quality is amazing. Everything feels very solid (no paper-thin sheet metal), cable grommets to route everything 2

This case is amazing, best case I've ever built in.

 The side AIO is set-up in a Pull config, since I have the newer Noctua NF-A12x25 and I was trying to hide them. This requires a 240 rad and not a 360. Also, the rad needs to be mid mounted, or else the front panel cables get in the way. You don't have this issue in a push, but since temps aren't really any different I was trying to hide the brown fans

 I am looking at it long-term, since Gamers Nexus had their front panel glue weaken over time, and I'm hoping that was a fluke.

 I set it up, in a way many reviewers worked best for cooling. It has two Noctua Chromax fans bringing in air from the top and bottom. The top mount is directly over the VRMs for the X470 Taichi board. The pic isn't a glamour shot, but just to show what I mean

Great case. Be careful with a Pull side AIO config

 I think they have an add on option but what comes with it is just okay.  Further Thoughts: Currently using five fans (3 side intake and two top exhaust) and the airflow is really good and temps are well within tollerance even in a hot office. I may move to liquid cooling in the future but for now I am satified with the setup.  Stock photos made the glass look clear but it is slightly smoked

 Plenty of room length wise but pay attention to max heights and widths for heatsinks and GPU's. Also don't forget to consider the extra width needed for a PCI express cable if yours plugs in the side of the GPU. (wasn't a problem on mine and the cable adds another inch or so but check.)  Cons: The mount points for the fans are curved shaped and bend of you tighten the fan screws too much much

Absolutely love this case.

 Simple to work on, Plenty of ventilation with dust covers, looks fantastic, tons of room especially for a mid-size tower, Fits the 3090 Founders Edition!

 (3 as an intake and 3 exhaust) Really helped cool my processor quietly. Could not be happier with this case. Simple to work on, Plenty of ventilation with dust covers, looks fantastic, tons of room especially for a mid-size tower, Fits the 3090 Founders Edition!

Fits my 3090 Founders Edition!!

This Filter is designed to fit the Sliger Cerberus X computer case's top panel vent where the case does not have the carry handle fitted.

DEMCiflex Computer Air Filters fits by way of a magnetic frame that is part of its structural design. This would adhere directly to the case and in the event that the case is non-ferrous (it has no iron in it's composition so that a magnet is not attracted to it) we supply you with a peel and stick magnetic frame (optional extra) that is fitted onto your PC case, around the air intake area. DEMCiflex Dust Filter will attach to this frame, making it easy to remove and clean when necessary. The mesh used for filtering is a very durable high precision medical grade mesh.

The mesh that acts as filter will separate dust and debris from the cooling air without adversely affecting or restricting the air flow.

DEMCiflex filter thickness(height) is less than 2mm (1.9mm approx) and if combined with the extra magnet for non-ferrous surfaces it is less than 2.5mm(2.4mm approx).

This thickness stays the same regardless of the size of the filter.

Filter material is approx. 0.1mm thick.

Model: DF1014

Optimum Tech

Level1Techs

r/sffpc

 Coming in at 16L, the Slager SM580 is all business when it comes to hardware. Cooling the GPU is also not an issue, there's plenty of ventilation for both intake and exhaust. Two 2.5-inch drives can be mounted behind the front panel, and if you need additional storage, you can use the mounting cages to store sets of 2

 So, the definition of a workstation is somewhat blurred these days, but basically, we're talking anything from a high performance video editing machine, all the way up to one that can be used for multi-GPU rendering. So, things that are important here for the system and the case, performance, cooling, reliability, and accessibility if you need to swap out components. So, let's start with the smallest one first, and here my vote goes to the NCase M1, probably no surprise to most of you. Now, you're not going to be building a multi-GPU setup in this case, but in terms of cramming as much CPU performance in a case under 15L as possible, this is the one that I'd personally go for

 So, let's start with the smallest one first, and here my vote goes to the NCase M1, probably no surprise to most of you. Now, you're not going to be building a multi-GPU setup in this case, but in terms of cramming as much CPU performance in a case under 15L as possible, this is the one that I'd personally go for. So, the big thing that the NCase M1 has going for it is cooling. A 240mm AIO here with the fans pulling air inside the case can easily cool Intel's 8-core 9900K or AMD's 12-core 3900X

The Best Workstation SFF Cases - Huge Power, Small Volume

 Now the ideal use case for the Cerberus and Cerberus X in my opinion is for those building compact workstations, sure you can build a gaming machine in these cases but it's a bit going to waste and in my opinion that's where the Dan A4 and Ncase M1 really shine and come in if you're looking to build as compact as possible. Certainly nothing can defeat the Cerberus and Cerberus X in the workstation space though if you are looking to build as compact as possible. The price in my opinion is a big factor of why I'm led to that conclusion and why I would personally withhold recommending it to those who are not building $2,500 plus machines. My configuration didn't require a ton of add-ons only the $15 window kit, the vented side panel on the flip side and then the matte white panels but even then that makes the Cerberus a $255 US case and $305 US dollars if you wanted to do the same thing in the Cerberus X

 The price in my opinion is a big factor of why I'm led to that conclusion and why I would personally withhold recommending it to those who are not building $2,500 plus machines. My configuration didn't require a ton of add-ons only the $15 window kit, the vented side panel on the flip side and then the matte white panels but even then that makes the Cerberus a $255 US case and $305 US dollars if you wanted to do the same thing in the Cerberus X. The good news is that soon these cases will be available on Newegg.com and SFFlab

Chimera Cerberus & Cerberus X - A Compact Workstation Dream!

 My initial plan for this was to stuff a 32 core thread ripper in here But then it's like well, I want to do a custom loop and well There's some other options and this does support XL ATX So those extra long motherboards would work in here, especially with the radiator mounted in the front You're just not gonna have super deep cars, but where we're using this for a rosy upgrade Maybe it may be a future build. You've also got this option for the rear plate Which will let you just mount your SFX power supply directly right there. And this is what we're going to use There are also other options So if you want a vibration dampened three and a half inch drive mount That you actually set up in the bottom of the case or in the top of the case. You've also got options for that Now even though this computer is slightly bigger than a lunchbox a little bigger than our old build We will be mounting this in the top Which will give us mount points for our handle So yeah, we can have another handle on this machine in case we need it to be portable strictly speaking Don't need a handle on rosy, but you never know with the top handle set up

 It's a pretty big card We have like five millimeters of clearance you ever take between our NZXT Kraken x62 You know all-in-one closed-loop cooler, which is necessary for 5 gigahertz on 14 nanometer. I mean, let's let's be real and You know and the GPU so and one of the things that Sliger is known for Is customization so they've really put a lot of thought into how you can customize the case So there's there's a pretty big cutout here over the motherboard This one is the one if you're gonna mount the power supply inside the case somewhere You can mount it vertically where I've got the radiator mounted and you've also got the the punch outs for a custom loop cooler So if you wanted to have your tank and reservoir or even your radiator located somewhere externally You could totally do that with this setup, you know You can have an external rad somewhere if you really wanted to so you could use this bracket for example to mount your SFX power supply internally in the case and then you know You would be able to use your SFX case your SFX power supply completely internally and it comes with the Extension cable to go from there to here depending on where you actually end up mounting your SFX power supply If you want to cram a standard size the ATX power supply you can but since you can get standard SFX power supplies up to you know 750 850 watts That's gonna be enough to cover builds. My initial plan for this was to stuff a 32 core thread ripper in here But then it's like well, I want to do a custom loop and well There's some other options and this does support XL ATX So those extra long motherboards would work in here, especially with the radiator mounted in the front You're just not gonna have super deep cars, but where we're using this for a rosy upgrade Maybe it may be a future build. You've also got this option for the rear plate Which will let you just mount your SFX power supply directly right there

Sliger Cerberus X: The Compactest ATX Case?

Lian Li O11 Dynamic Evo vs Sliger Cerberus X

QUICK QUESTION!

You might also like