Benchmade - Hidden Canyon vs Sanrenmu 710

The sheath had a tendency to sag under the weight of the handle, witch is longer than the blade. I wound up using some leather contact adhesive on the sheaths belt loop to keep the knife from sagging. Worked like a charm.

It's just a tad bit on the heavy side in comparison to my Spyderco Native but the clip tension is just right. I had a CRKT Drifter once and although I liked the size, the clip was horrible. It was too tight and kept messing up both jeans and slack pocket. I thought I'd first carry this everyday since I wouldn't want to lose my Spydercos and Benchmades that cost up to $50 and above

Nice little knife. Very sharp. Looking forward to many years of service. Not my first bench made, won’t be my last

My only recommendation is to loc-tite the retaining screws as they tend to fall out after a few years. That being said, the frame still holds together even with all of the lockplate screws having fallen out, which is totally wild. Blade lockup is still fantastic and the steel quality is such that it retains an admirable edge with some effort. For the money, this is one of the best knives I've owned and put it up against the Kershaw Chill for value