Hiking Boots/Shoes Recommendations?

Hiking boot recommendations?

Any recommendations for women's hiking shoes?

[Request] Hiking/outdoorsy style shoes that can handle lots of walking on concrete

Cold and wet weather hiking boots recommendations?

I am in need of a new pair of trail/hiking boots.

Hiking Boots for heavy use during the summer

Good pair of hiking shoes?

[Request] waterproof hiking shoes

[request] - Good quality walking shoes.

Hello Redditors. I'm in search of a classy yet extremely durable pair of hiking boots to take backpacking around the world for 12+ months with.

Hiking boots recommendations

Men's three season "urban hiker" (like Merrell MOAB but longer lasting)

BIFL Hiking boots for women

Hiking boots with good traction and can stand up to abuse.

Looking for a good pair of shoes for my weird feet

Request - Hiking Sandals

Request: Hiking Boots

Comfortable and cushiony shoes for walking on pavement 10KM/couple hours a day (UK)

Hiking sandals that last?

[Request] Powerful dishwasher with sanitize function?

I want the best god damned dishwasher money can buy.

Looking for the best, easiest to operate, cheapest dishwasher - Recommendation?

[Request] Best countertop dishwasher for reasonable price?

Can anyone recommend a good dishwasher?

Countertop/Portable Dishwasher

[Request] Dishwasher &lt;$1k Australian with QOL features and low water use

Dishwasher for Second Home

My friend bought a house with this KichenAid dishwasher from 1974. He says it works better than any of the other ones he has owned. He just has to convince his wife not to replace it.

What's a good Panel ready dishwasher under $1k?

Best socket set on the market $100-$150

[Request] Socket wrenches

I need a recommendation for a tool set that should last a lifetime. [Request]

Looking for a Mechanics tool set.

23 years later; GM Goodwrench socket set.

A Starter/Lifetime Tool set

Basic screwdriver set needed

Mechanic Tools that are BIFL

Trying to fill a tool roll for my truck and would like input on BFL tools like wrenches, pliers, socket sets, etc.

BIFL: Mastercraft ratchet set with lifetime warranty. Got it at 14, im 31. Went thru more abuse than you think!

Looking to upgrade my home hand tools

Was told to post this here. Husky 270pc toolset from Home Depot for $99, normally $199. Lifetime warranty too

[Request] Ratchet/Wrench/Etc tool set for home/bicycle/general use

Thoughts on a Honda Accord V6 2007?

2010 Honda Accord worth the buy?

Thoughts on a 2008 Honda accord v6 coupe EX-L?

2014 honda accord ??

After an initial round of research it seems like Honda Accord Hybrid is the right answer, but I want to pressure test that with you guys

2014 Accord V6 Touring (any thoughts?)

Which car ?

me again. 2010 2dr honda accord, 122k miles for $5,800. just want a reliable first car, thoughts?

Want to buy an Accord, any suggestions?

2020/2021 Honda Accord LX - Tell Me About Your Likes/Dislikes

Compact - Midsize suv

best small/midsize suv?

Looking for a used (06-14) reliable compact/mid-size SUV

compact/mid size suv

Midsize SUV

Recommendations for midsized SUVs to look at

Compact to Mid-Size SUV

Small to mid-size suv suggestions?

Midsize vehicle for three kids

Mid-Size SUV

Just tried a Lotus Elise Cup 250, driving impressions !

Dan Neil reviews Lotus Emira: As Good As It Gets

Considering a Lotus Elise - USA

How affordable are Lotus Elises from the 2005-2012 model year?

Lotus Exige Sport Final Edition review: farewell, Exige

I wanna know everything you know about a 2005 Lotus Elise

My Lotus Evora Review

Lotus retail sales up 24% in best performance for a decade

2022 Lotus Emira Looks to Be One of the Brand's Best

PURCHASING A LOTUS — Need Tips + Advice.

Looking for a good rpg/action adventure with a good story and good characters

Deep long rpgs?

Looking for a story-focused RPG

Looking for a complex RPG

Fantasy games with an detailed and immersive world?

[WSIB] I am in search for a open world RPG that will keep me busy for hundreds of hours.

Open world game with huge map, lots of things to do, and great graphics

WSIB Feeling a bit of an rpg lull and want something exciting like old school BioWare with a engaging story that doesn’t take 100 hours to play.

WSIB: long, immersive games with high quality storytelling and writing

looking for an open-world rpg

[WSIB] A turn based strategy game that isn’t 4X

Turn-based strategy game

Turn-based strategy games

[WSIB] Small-scale, medieval, strategy game, featuring pikemen and cavalry

(WSIB) Turn-based ”wargaming” game

[WSIB] Turn Based Strategy games

WSIB if I want a strategy game for dummies

WSIB Strategic Rpg

[WSIB] Good offline strategy/(ish) games?

What are some good "smaller scale to control, but still feel large scale battle" tactical / strategy games?

Bullet Hell-Type Games: Atomicrops vs. I, Dracula: Genesis vs. Others?

WSIB if i want a completely story driven indie game but have already played undertale and oneshot (preferably similar to those 2)

Post apocalyptic enthusiast, Underrail or Atom RPG?

[SIB] Undermine or Atomicrops

WSIB if I like "Run into things, need to grow in power/special items to move further so I come back after unlocking said element" type of games.

Blsoodborne or Resident evil 2 ?

What should I buy? Animal Crossing: New Horizons or Doom: Eternal

[WSIB] Fast-paced top-down roguelikes?

[SIB] I Hate Running Backwards or Planetary Dustoff? Or something else?

SIB Nuclear Throne?

What can you recommend for minimizing pores?

I know you can’t get rid of pores but I’m wondering is there anyway to make them smaller? I use La Roche Posay products. They keep my acne mostly at bay but I feel like my pores are just so large. Part of it is genetic, but just wondering if there’s anything else I can do at home to help. Thanks!

OPEN PORES- WHAT TO DO? IS THERE ANY PRODUCT I CAN USE?

What skincare products have you used that helped with large pores?

What is the best thing to use to tighten pores on your face?

Can anyone tell me why my pores are so huge and what I can do to minimize them?

How to reduce pores.

Hey guys, how do I make my pores not look like this? Info in comments (deleted and reposted for an error in the title)

Pores reduction tips?

Advice for shrinking pores on and around nose?

[sun care] sunscreen that doesn’t irritate rosacea and perioral dermatitis

[Sun Care] Looking for sunscreen that doesn't irritate Rosacea

Sunscreen recommendations for rosacea

Looking for a sunscreen for my acne prone skin.

[Sun Care] looking for a sunscreen that works well for people with Eczema.

Desperate for a good sunscreen

Looking for a Daily Suncreen

I’ve tried them all and I still can’t find my holy grail for my dry rosacea skin. Any other recommendations?

Sunscreen, eczema and makeup, Help [Sun care]

[Sun Care] Help with not being able to use Sunscreen

How can i stop a really greasy face?

How to best defeat oily skin?

Is there any long-lasting solution for oily face?

Oily Face -&gt; Wash Face -&gt; More Oily

Extremely oily skin

Y’all know some sort of cream or product I can buy to make my face less greasy looking?

super oily face help needed

Oily Skin— please help!

Really oily skin

How to have less oily skin?

Adrian Krebs

Johannes Engler

Tavis Lochhead

amazon.com

Hardware For Gamers

Pocketables.com

r/Amd

r/buildapc

r/buildapcsales

r/pcmasterrace

r/sffpc

 With the new card, temps were hovering anywhere between 70°C to 78°C on some games and varying ambient temps. The below list are max temps reached during these games with my previous top 120mm fans and my current 3060 Ti:  71°C Rainbow Six Siege 78°C Apex Legends 74°C DiRT Rally 2.0 75°C Monster Hunter World 76°C Shadow of the Tomb Raider  All games were tested for 45 minutes, max possible settings for each game on a 1080p 144hz monitor; Ray Tracing enabled for Shadow of Tomb Raider, Ultra setting. As mentioned previously, I have a Phanteks P400 case with a front-mounted NZXT X52 cooling a Ryzen 5 3600 paired with a 3060 Ti from Asus, the DUAL OC model and the two 120mm fans mounted at the top

  These are my temperatures now with two Arctic P14 top-mounted fans:  62°C Rainbow Six Siege 64°C Apex Legends 66°C DiRT Rally 2.0 68°C Monster Hunter World 67°C Shadow of the Tomb Raider  By no means were my previous temperatures bad as my GPU still performed below it's 83°C limit but there's real performance to be gained by dropping temps as much as I did; 14°C less on Apex Legends with the Arctic P14 fans, simply incredible and I can't explain how.  I am no expert when it comes to airflow but I figured that now having a larger GPU in size, my old 120mm top-mounted fans were not exhausting enough hot air and a lot of it was recirculating within the case, driving my temperatures up. I'm running these new P14 fans at their max rated RPM of 1700 and the sound is personally not bothersome enough for me to slow them down

  I hope my use case gives others an idea of what kind of gains you can get temperature wise and ultimately better performance by keeping your components cooler. In my case, this upgraded targeted specifically my GPU and it worked just as I expected.  I will recommend these fans to anyone and everyone looking for super quiet, high performance fans at an incredible cost when compared to the competition.  I will lastly like to thank Hot Deals 4 Less for the incredibly fast shipping from the US to Costa Rica, the fans arrived in excellent conditions

Killer performance for the price.

 BIOS adjustments will work through the motherboard so customization of the fan control is straight forward. These should just go along with any configuration a user sets up. Simply leaving the BIOS at factory settings is also an option - the point being; install to the frame, plug into the board, and no other action is required on the fan itself.  Installation was pretty easy as well

 Simply leaving the BIOS at factory settings is also an option - the point being; install to the frame, plug into the board, and no other action is required on the fan itself.  Installation was pretty easy as well. These use an ABS plastic frame in their design - its durable, yet has some surface pliability. The installation is simply to use the provided screws which will cut their own threads into the plastic

Effective Cooling at a Bargain

 I may take one of the Noctua 150s off of its heatsink and test it separately, and we'll start building some information for how much noise do they make at what RPM, what kind of motor sounds do we have. We have equipment for measuring DBA, what we do need to get equipment for is measuring air speed and air pressure, and that's just a matter of, now that I have some stuff to test I have to build it and test it, and obviously I'll need to get something with PWM control capable of driving these fans, which is on my list anyway. That's a quick rundown, that's our unboxing of these Arctic P14s, really you get the fans, an instruction card, so you get five fans in a box with an instruction card, these are the PST versions, so each one comes with this little header, and then this is the part that I'm not super excited about, these are just standard steel colored case screws for the fans, I'm probably going to try and get different screws, and it's not that there's anything wrong with these, the case is black, so I'm going to want my screws to match, I don't want a bunch of silver screws sticking out on a black case, so anywhere that these would be visible, I'm going to try and get black screws for them, which I've got some of, the case came with some of, and I mean it's a bag of screws, and that's not a dig at Arctic or anyone else, that is just a comment on aesthetics, so alright, I think that's enough rambling about these, once again thank you for Arctic for sending these in for our video editing rig rebuild, very excited to have some of these left over to test as well, and hopefully this is the start of more fan testing, because everyone is always arguing about who makes a better fan, what fan makes better pressure, what fan moves more air, what heat sinks cool better, and this is pocketables getting into that to say, you know, unequivocally we recommend X at this price point, and that's a key qualifier there, I mentioned that these are cheap, I mean, they're not cheap, poorly made, they're a good value type cheap, there may be other fans that we test, you know, I mentioned Noctua is usually one of the ones that gets compared to these, that are outright better, but if it costs three times as much, is it worth being 5% better, depending on what you're doing, maybe not, especially, you know, I mentioned in our case we're going to have nine of these, so that's, if I was to have purchased the 140mm, 25mm thick Noctua's that I would have looked at for this, I would have been looking at about $300 in fans, which I generally can't justify, anyway thank you to Artic for sending these in, we're looking forward to getting into more testing, and kind of putting some questions to bed as far as which fans do what, at what speeds and what price points, I also want to thank anyone who helps support pocketables, either on Patreon, or through our Amazon affiliate links, which there will be a link to these fans, both individually multi-pack as well as the F-Series fans, if you're really looking at them as just a case fan, in the description below, and I want to thank Electrics for providing our opening and closing themes, and finally, and finally, thank you for watching.

 So this is a 5 pack of PWM 140mm 200-1700 RPM 72.8 CFM 2.4mm of water static pressure fluid dynamic bearings and this is where things get a little weird is they rate their noise level as 0.3 sown, they don't rate it in DBA at a distance and that's really something the fan manufacturers like to do so that they are all harder to compare than they should be

Artic P14 PWM PST fans, a budget breeze

 A cheap pair of Noise-Reducing earmuffs paired with earplugs eliminated most of the noise, at least made it tolerable. If possible, I would suggest perhaps moving your PC into a bunker, or your neighbors shed, especially if they have a barking dog, as the fans will drown them out.

Fans were easy to install, and do a great job. Most cost effective fans on the market. But, BIG BUT, these MFs LOUD! When I tuned these fans in the bios, and they spooled up for the first time, it sounded like an 18-wheeler and an airplane playing tug of war. It was an easy fix tho

 But, BIG BUT, these MFs LOUD! When I tuned these fans in the bios, and they spooled up for the first time, it sounded like an 18-wheeler and an airplane playing tug of war. It was an easy fix tho. A cheap pair of Noise-Reducing earmuffs paired with earplugs eliminated most of the noise, at least made it tolerable. If possible, I would suggest perhaps moving your PC into a bunker, or your neighbors shed, especially if they have a barking dog, as the fans will drown them out

These ni66as LOUD!!

 You may also want to check out these videos here they should be along the same lines of what you just watched and as always thank you very much for watching and see you next time.

The Arctic P14 PWM - Fan Review

ML120 PRO 120MM PREMIUM MAGNETIC LEVITATION FAN

Mike Russell

It'sAGundam

TechEd

r/Corsair

r/battlestations

r/playstation

r/ASUS

 There is no Bearing noise no whine And that was really exciting for me when when I started rendering things using this new fan Using this new fan It has a power usage of 0.2 to 5 amps It has a speed range of 400 to 2,400 RPM Its dimensions are 120 millimeters by 25 millimeters sound noise ranges between 16 and 37 decibels It uses a 4-pin PWM connector and the PWM standard gives you a little more control over What RPM ranges you're running at? It's optimized for both airflow and Static pressure airflow meaning say you put it on the front of your case and you want to just Suck in as much air as you want as you can through that case Static pressure is say Attaching that fan to a radiator You need more optimized Static pressure in order to push more air through that radiator and each fan design Will give you one or the other Depending but they've designed this one to give you sort of a combination of both And We'll go through the performance Of this to show you just how well it does perform. I can say that the Blade design on this fan The the blades make a little more noise So you hear more wind noise out of this fan than you do on the air balance fan that I have but Again, I'm not hearing any whine. I'm not hearing any clicks and Those really bother me through the side panel of my case A little bit of wind noise

 I can say that the Blade design on this fan The the blades make a little more noise So you hear more wind noise out of this fan than you do on the air balance fan that I have but Again, I'm not hearing any whine. I'm not hearing any clicks and Those really bother me through the side panel of my case A little bit of wind noise. I'm fine with that. That's a more consistent noise, but that high-pitched whining, I just It drives me nuts

 You can tell it's well built If you want to purchase this fan for yourself I will link it down in the video description But I am extremely happy with this fan I plan on in the future replacing the rest of the fans in my case With these I think it's a great Option for both airflow and static pressure. It performed excellent in the against the radiator of my cpu cooler and I love the way they look. I love the blackout aesthetic that it has on it And so I give this one a thumbs up So if uh, if you're corsair listening or watching this video, um You know, send me some more things. I'd love to do some more reviews of your products I really enjoy working with corsair products

I love my FANS! Corsair ML120 PRO Review!

 If you've ever had a PS4 pull a jet engine on you, it's pretty similar. With a headset on it really isn't noticeable and I think it honestly moves more air than my room fan does..

So, I read the reviews before I got this (Corsair ML120 Pro LED, White, 120mm Premium Magnetic Levitation Cooling Fan (CO-9050041-WW)). I just built a pc and my stock case fans are atrocious and it's making everything in my case moody. I'm a huge Corsair fan (despite my problems with the quality of some of their headsets) and I'm not super into RGB. It seemed like fate that I would find an LED only maglev fan

A highly recommended beast with only a few drawbacks

This is sick but I don't agree with the fan choice... I tried the Corsair ML120 Pro and thought they were unbearably noisy

5900x and 6900xt

 And I figured I was long, long overdue for new fans. In all honesty, I was waiting to get some cash together and buy a completely new case because the half-193 case I use is a dust magnet. The ML120 fans are packaged quite nicely, actually. Oh, and the price I got for these was like $70 or so

 The ML120 fans are packaged quite nicely, actually. Oh, and the price I got for these was like $70 or so. I think it's usually $120, so I figured, no brainer. It comes with the usual Corsair rigamarole, their control hub, which you need if you want the RGB to work

 Come on, bring me the ball, dog. Be quick about it. Show me cuteness. Show me cuteness

 It's not worth the extra 10 to 20 degrees of heat. Yes, I tested it. And on that note, I'm out of here as I just wanted to do a very fast video for this. I like these fans

 And on that note, I'm out of here as I just wanted to do a very fast video for this. I like these fans. I would recommend them to anyone using stock fans from Corsair or any other company that has an AIO cooler. Or if you have like, I don't know, that Corsair glass case, these would be perfect for that

Corsair ML120 pro RGB Review: A nice little upgrade

 Also the ML fans have a PWM connector compared to a 3 bin connector on their older SP and AF series because I believe it requires a constant 12v power source for that magnetic bearing to actually work properly. Also one thing to note, these ML fans are meant to float in mid air when powered on in your system but as you can see I can't actually remove the fan blades because they do fill out their tacks somehow but how they actually achieve this as well, your guess is as good as mine. So the first thing you will notice is Corsair has changed the look and design of the new ML fans. This time around Corsair has a new custom motor design which is meant to have a balance between high static pressure and high airflow which previously would require you to get some SP fans for static pressure for airflow through say a radiator and some AF fans for some decent airflow around your case, which is not required now with the ML series

3 of an amp. All these fans today have different RPM speeds but for a quick noise test I've set that all around 1300rpm to give a bit of a comparison. So to wrap things up, the ML series fans from Corsair are a serious piece of kit. After all, these are premium fans we are talking about here

 So the first thing you will notice is Corsair has changed the look and design of the new ML fans. This time around Corsair has a new custom motor design which is meant to have a balance between high static pressure and high airflow which previously would require you to get some SP fans for static pressure for airflow through say a radiator and some AF fans for some decent airflow around your case, which is not required now with the ML series. With that new custom road design, it appears they have smoothed off the housing around the fan blades on the front to stop any resistance of airflow and on the back changed the shape to allow better spread of air for possibly using with radiators. Corsair has also opted to mount the LEDs in the centre of the fan instead of on the corners like on their previous LED versions, which I have to say gives that light source that even clean look across the fan blades which is much better than their previous AF LED fans

 The airflow is between 12-75CAFM which is potentially better than both SP and AF series fans. The static pressure is between 0.2-4.2 and has a sound level of 16-37dBA and the fans can reach speeds of 2400rpm if you really feel the need to do so and also has a power draw of 0

Corsair ML120 Pro Led Review Magnetic Levitation Fan? With SP120 and AF120 led comparsion

Get some ML120 Pro or  Noctua NF-A12, you can get a powered PMW fan hub or 3 way splitter  just make sure you don't go over the 1A  allowed by the fan header.

As u can see, the case only have 1 x 120mm fan infront.

I would like to add 1 x 120mm fan where red arrow are. If that still not enough I would like to add 1-2 x 120mm fans where blue arrow. What fans do u recommend (no RGB fan)? The motherboard only have 1 extra Sys\_Fan (yellow arrow). How can I daisy chain the fans after if I buy them separately? Thanks!

https://preview.redd.it/z62d45zfied91.jpg?width=1134&amp;format=pjpg&amp;auto=webp&amp;s=4f203cac63dbb7ac9601602d7d44e9531479f30b

<div class="md"><p>As u can see, the case only have 1 x 120mm fan infront.</p>

<p>I would like to add 1 x 120mm fan where red arrow are. If that still not enough I would like to add 1-2 x 120mm fans where blue arrow. What fans do u recommend (no RGB fan)? The motherboard only have 1 extra Sys_Fan (yellow arrow). How can I daisy chain the fans after if I buy them separately? Thanks!</p>

<p><a href="https://preview.redd.it/z62d45zfied91.jpg?width=1134&amp;format=pjpg&amp;auto=webp&amp;s=4f203cac63dbb7ac9601602d7d44e9531479f30b">https://preview.redd.it/z62d45zfied91.jpg?width=1134&amp;format=pjpg&amp;auto=webp&amp;s=4f203cac63dbb7ac9601602d7d44e9531479f30b</a></p>
</div>

Question on adding fans to 175R case

 I haven’t had the need to run them any faster due to the temps I’m seeing even on full load. I am running a 4790k (currently not overclocked but typically @ 4.8 GHZ), GTX970, with a Kraken X61 AIO Cooler. These fans are set up with three as intake on front of my Fractal Design Define S case with two set up as exhaust pushing air through the top mounted radiator

8 GHZ), GTX970, with a Kraken X61 AIO Cooler. These fans are set up with three as intake on front of my Fractal Design Define S case with two set up as exhaust pushing air through the top mounted radiator. Attached are pictures of the temps I’m running and I’m easily seeing about 15-20 degree difference from replacing the stock case fans. Would remove a star as I think these could be just a couple of bucks cheaper but still great value for the money! Not sure why I can’t upload pics from my phone but as soon as I figure out why, I’ll show the fans installed, the temps I’m seeing, and the NZXT software showing the fan RPM

 Attached are pictures of the temps I’m running and I’m easily seeing about 15-20 degree difference from replacing the stock case fans. Would remove a star as I think these could be just a couple of bucks cheaper but still great value for the money! Not sure why I can’t upload pics from my phone but as soon as I figure out why, I’ll show the fans installed, the temps I’m seeing, and the NZXT software showing the fan RPM.

Incredible fans! Pictures to come...

ARCTIC P14 PWM PST vs Corsair ML120 Pro RGB

QUICK QUESTION!

You might also like