Svord peasant blade vs Spyderco Tasman Salt 2 Lock

Love the Svord! Such an awesome knife for a great price. I think I got my full size and mini for $10-$12 each.

Uh - and you know this is again almost expensive for your pfd, but this is just a high quality rope cutter and, if that's valuable to you, i think thi...

The blade isn't strong at all. Came with a chip in the edge, and varies between having a sharp and a dull edge. For the wood the finish although it's suppose to be "rustic" was really poorly done with gouges and an unfinished side. And the screws/posts didn't fit into the wood well at all

This is my brutally honest assessment of this $100 knife: $95 H1 blade; $3 handle; $2 construction. You decide if it's worth it. For VERY light-duty use, it's probably fine. But this Salt 2 slicer should have absolutely been designed with liners for blade rigidity and handle/pivot strength; as it is, the blade flexes and torques noticeably side to side

This pin was not present on the knife I ordered. This meant there was nothing stopping the blade from going too far backwards except the tension on the screws. The problem is, if you set them tight enough to stop the blade from going backwards, it's very difficult to open. I don't know why they stopped putting this pin in, or if it's only my knife that it happens to be missing from

I can tell it's brand-new and I thought if it's, if it's not been heavily used, it's a counterfeit. It's got to be so. I took a picture of the box and...

I could see it as a neck knife with a clip on the lanyard small enough to fit the hole in the tang. 3. It's durable. The simple mechanism and extra length of the tang should allow it to withstand some beating without complaint

Very light but very durable. Easy to grip. The belt/pocket clip can be seated in any of the 4 possible orientations. The finger for opening the blade is large which makes it easy to use even if your other hand is in use

The handle is rough but the blade seems pretty good. It is bigger than you would think but not in a good way.

If they made the grip a little larger and had steel liners I’d give it 5 stars, but I doubt I’ll be breaking the handle anytime soon. Really like the higher-end spyderco lines (made in Japan or USA)!