Hiking Boots/Shoes Recommendations?

Hiking boot recommendations?

Any recommendations for women's hiking shoes?

[Request] Hiking/outdoorsy style shoes that can handle lots of walking on concrete

Cold and wet weather hiking boots recommendations?

I am in need of a new pair of trail/hiking boots.

Hiking Boots for heavy use during the summer

Good pair of hiking shoes?

[Request] waterproof hiking shoes

[request] - Good quality walking shoes.

Hello Redditors. I'm in search of a classy yet extremely durable pair of hiking boots to take backpacking around the world for 12+ months with.

Hiking boots recommendations

Men's three season "urban hiker" (like Merrell MOAB but longer lasting)

BIFL Hiking boots for women

Hiking boots with good traction and can stand up to abuse.

Looking for a good pair of shoes for my weird feet

Request - Hiking Sandals

Request: Hiking Boots

Comfortable and cushiony shoes for walking on pavement 10KM/couple hours a day (UK)

Hiking sandals that last?

[Request] Powerful dishwasher with sanitize function?

I want the best god damned dishwasher money can buy.

Looking for the best, easiest to operate, cheapest dishwasher - Recommendation?

[Request] Best countertop dishwasher for reasonable price?

Can anyone recommend a good dishwasher?

Countertop/Portable Dishwasher

[Request] Dishwasher &lt;$1k Australian with QOL features and low water use

Dishwasher for Second Home

My friend bought a house with this KichenAid dishwasher from 1974. He says it works better than any of the other ones he has owned. He just has to convince his wife not to replace it.

What's a good Panel ready dishwasher under $1k?

Best socket set on the market $100-$150

[Request] Socket wrenches

I need a recommendation for a tool set that should last a lifetime. [Request]

Looking for a Mechanics tool set.

23 years later; GM Goodwrench socket set.

A Starter/Lifetime Tool set

Basic screwdriver set needed

Mechanic Tools that are BIFL

Trying to fill a tool roll for my truck and would like input on BFL tools like wrenches, pliers, socket sets, etc.

BIFL: Mastercraft ratchet set with lifetime warranty. Got it at 14, im 31. Went thru more abuse than you think!

Looking to upgrade my home hand tools

Was told to post this here. Husky 270pc toolset from Home Depot for $99, normally $199. Lifetime warranty too

[Request] Ratchet/Wrench/Etc tool set for home/bicycle/general use

Thoughts on a Honda Accord V6 2007?

2010 Honda Accord worth the buy?

Thoughts on a 2008 Honda accord v6 coupe EX-L?

2014 honda accord ??

After an initial round of research it seems like Honda Accord Hybrid is the right answer, but I want to pressure test that with you guys

2014 Accord V6 Touring (any thoughts?)

Which car ?

me again. 2010 2dr honda accord, 122k miles for $5,800. just want a reliable first car, thoughts?

Want to buy an Accord, any suggestions?

2020/2021 Honda Accord LX - Tell Me About Your Likes/Dislikes

Compact - Midsize suv

best small/midsize suv?

Looking for a used (06-14) reliable compact/mid-size SUV

compact/mid size suv

Midsize SUV

Recommendations for midsized SUVs to look at

Compact to Mid-Size SUV

Small to mid-size suv suggestions?

Midsize vehicle for three kids

Mid-Size SUV

Just tried a Lotus Elise Cup 250, driving impressions !

Dan Neil reviews Lotus Emira: As Good As It Gets

Considering a Lotus Elise - USA

How affordable are Lotus Elises from the 2005-2012 model year?

Lotus Exige Sport Final Edition review: farewell, Exige

I wanna know everything you know about a 2005 Lotus Elise

My Lotus Evora Review

Lotus retail sales up 24% in best performance for a decade

2022 Lotus Emira Looks to Be One of the Brand's Best

PURCHASING A LOTUS — Need Tips + Advice.

Looking for a good rpg/action adventure with a good story and good characters

Deep long rpgs?

Looking for a story-focused RPG

Looking for a complex RPG

Fantasy games with an detailed and immersive world?

[WSIB] I am in search for a open world RPG that will keep me busy for hundreds of hours.

Open world game with huge map, lots of things to do, and great graphics

WSIB Feeling a bit of an rpg lull and want something exciting like old school BioWare with a engaging story that doesn’t take 100 hours to play.

WSIB: long, immersive games with high quality storytelling and writing

looking for an open-world rpg

[WSIB] A turn based strategy game that isn’t 4X

Turn-based strategy game

Turn-based strategy games

[WSIB] Small-scale, medieval, strategy game, featuring pikemen and cavalry

(WSIB) Turn-based ”wargaming” game

[WSIB] Turn Based Strategy games

WSIB if I want a strategy game for dummies

WSIB Strategic Rpg

[WSIB] Good offline strategy/(ish) games?

What are some good "smaller scale to control, but still feel large scale battle" tactical / strategy games?

Bullet Hell-Type Games: Atomicrops vs. I, Dracula: Genesis vs. Others?

WSIB if i want a completely story driven indie game but have already played undertale and oneshot (preferably similar to those 2)

Post apocalyptic enthusiast, Underrail or Atom RPG?

[SIB] Undermine or Atomicrops

WSIB if I like "Run into things, need to grow in power/special items to move further so I come back after unlocking said element" type of games.

Blsoodborne or Resident evil 2 ?

What should I buy? Animal Crossing: New Horizons or Doom: Eternal

[WSIB] Fast-paced top-down roguelikes?

[SIB] I Hate Running Backwards or Planetary Dustoff? Or something else?

SIB Nuclear Throne?

What can you recommend for minimizing pores?

I know you can’t get rid of pores but I’m wondering is there anyway to make them smaller? I use La Roche Posay products. They keep my acne mostly at bay but I feel like my pores are just so large. Part of it is genetic, but just wondering if there’s anything else I can do at home to help. Thanks!

OPEN PORES- WHAT TO DO? IS THERE ANY PRODUCT I CAN USE?

What skincare products have you used that helped with large pores?

What is the best thing to use to tighten pores on your face?

Can anyone tell me why my pores are so huge and what I can do to minimize them?

How to reduce pores.

Hey guys, how do I make my pores not look like this? Info in comments (deleted and reposted for an error in the title)

Pores reduction tips?

Advice for shrinking pores on and around nose?

[sun care] sunscreen that doesn’t irritate rosacea and perioral dermatitis

[Sun Care] Looking for sunscreen that doesn't irritate Rosacea

Sunscreen recommendations for rosacea

Looking for a sunscreen for my acne prone skin.

[Sun Care] looking for a sunscreen that works well for people with Eczema.

Desperate for a good sunscreen

Looking for a Daily Suncreen

I’ve tried them all and I still can’t find my holy grail for my dry rosacea skin. Any other recommendations?

Sunscreen, eczema and makeup, Help [Sun care]

[Sun Care] Help with not being able to use Sunscreen

How can i stop a really greasy face?

How to best defeat oily skin?

Is there any long-lasting solution for oily face?

Oily Face -&gt; Wash Face -&gt; More Oily

Extremely oily skin

Y’all know some sort of cream or product I can buy to make my face less greasy looking?

super oily face help needed

Oily Skin— please help!

Really oily skin

How to have less oily skin?

Adrian Krebs

Johannes Engler

Tavis Lochhead

RTINGS

The solidly-built GLORIOUS GMMK PRO has been a favorite among keyboard modification hobbyists since it first launched due to its high level of customization. Unlike the Keychron Q6, which you can buy fully assembled, this keyboard only comes barebones, meaning you'll have to purchase the keycaps and switches separately. You'll also have to install them yourself, which feels a bit like playing with LEGO, but it can be a bit tedious if you're not into that sort of thing.

Though, it's important to mention that it's not just the switches and the keycaps that are customizable. This keyboard is designed to be taken apart, tweaked, and modified at any level, so you can easily replace the sound-dampening foam inside the case with a different type of foam if you want a certain sound profile. Likewise, you can purchase different top plates, rotary knobs, and cables directly from GLORIOUS to complete your custom look. Unfortunately, you'll also have to buy the tools separately, like a keycap puller and switch puller, as this keyboard doesn't come with them.

amazon.com

theverge.com

rtings.com

The Techne

Chyrosran22

JYMV

Andy V Nguyen

r/keyboards

r/pcgaming

r/MouseReview

r/MechanicalKeyboards

r/razer

r/Keyboard

r/buildapcsales

r/Corsair

r/LogitechG

r/Keychron

r/sysadmin

r/battlestations

r/Workspaces

 So you know at least something about what you're getting the wrist rest is quite comfortable and they do padded designs as well. Apparently, the wire pullers are pretty standard and the switch puller is a known design as well, although these are branded and therefore relatively expensive, but these are very useful tools to have on hand wire, pullers aren't as good for pulling big keycaps as ring. Pullers like this are but they're much better for single unit keycaps, and this sort of switch puller is way better than this simpler design. So, even if you don't get them from glorious themselves, it's good to get these tools from somewhere at least the two-part coiled cable is very stout, and the connection in the middle here is apparently so that you can disconnect it without wearing out the actual end connectors

 Prices on those vary widely from a few hundred to a few thousand. My tip get this and one of the key cap sets and stick some box jades or box pinks, or something like that in solid, build with solid switches for 250 dollars. That'S it for this review. Thank you for watching

 To put that into perspective, that's roughly the same weight as an ibm, ssk model m. I remember that this is both smaller and it has a chassis made out of aluminium, not steel. If it had been steel, i reckon it could have given a model f, a run for its money, heft wise, because it feels like an adamantium monolith already and it's a wraparound case too, not one with those exposed floating switches that you see on many modern boards. I approve in any case it's turbo tough

 It'S really that which caught my attention. This manifests itself in not just a slew of optional extras that you can get for it, but a premium chassis plate, gaskets, pre-lubricated, stabilizers, a programmable rotary knob here and some other small tidbits. As a side note, please note that the keycaps and the switches were optional extras too, both of which are also called glorious. The switches deserve some special mention i'll get back to those later in the video

Glorious GMMK Pro review (Glorious Pandas)

This kit has some of the worst stabilizers i've had the displeasure of "using". Spacebar rattles and the other ones stick. To remedy this you can try cleaning them but not like Glorious instructs on their website with isopropyl alcohol; that murks the inside of the plastic housings and makes them abrasive and scratchy rendering them useless unless you take em apart and fully de-grease them in a soapy water bath then hand dry them after a rinse. Doing that reverts the lot back to usable (as in they will function) but with more rattle

 I shouldn't have to replace ANYTHING out of necessity on a buck seventy item.  Keycap choices are limited as well. Most sets lack the 1u right alt, fn, ctrl, the 1.75u right shift, and the correct profile Del and PgUP keys

 Most sets lack the 1u right alt, fn, ctrl, the 1.75u right shift, and the correct profile Del and PgUP keys. Also, no shine-through for you! These are south facing leds so unless your switches have clear housing don't rely on visible lit legends on shine-through keycaps. Puddings are a smear of light on this board

Terrible stabilizers, decent everything else, too many screws

 The Romer-G keycaps are also bad shapewise and uncomfortable.  But, I would say that if you don't care about the brand, get a Glorious GMMK. Even better, get the barebones edition for it; if it's available in your region. It's hot-swappable and compatible with many keycap sets, so you can get the exact key feel that you want to get

I would recommend the GX as well. Romer-G s are relatively older and are not really used anymore. The Romer-G keycaps are also bad shapewise and uncomfortable.  But, I would say that if you don't care about the brand, get a Glorious GMMK

I'm planning to get a Logitech G513, and I was stumped on either getting GX Brown switches or Romer-G Tactile Switches. I know that Romer-G has better durability and is a lot better competitive-wise, but the GX Switches can have the HyperX PBT keycaps on them, but I keep hearing from other people that the stems keep breaking off. So I'm not sure if getting the Romer-G keycaps would be worth it despite the customization options it brings.

<div class="md"><p>I&#39;m planning to get a Logitech G513, and I was stumped on either getting GX Brown switches or Romer-G Tactile Switches. I know that Romer-G has better durability and is a lot better competitive-wise, but the GX Switches can have the HyperX PBT keycaps on them, but I keep hearing from other people that the stems keep breaking off. So I&#39;m not sure if getting the Romer-G keycaps would be worth it despite the customization options it brings.</p>
</div>

Help between Romer-G and GX Switches

The overall typing experience of my Kailh Speed Silver and PBT keycaps build was quite good. I was surprised by how well everything fit together, resulting in a light and rattle-free touch-typing experience that’s made all the more impressive considering the GMMK Pro isn’t pre-assembled. While I wouldn’t say that it’s the best feeling keyboard I’ve used out of the box, the GMMK Pro is definitely up there.

3 pounds for just the chassis with nothing else in it, this is by far the heaviest keyboard I’ve ever used. This makes the chassis particularly resistant to any type of flexing or wobble. However, one interesting omission from the chassis is any feet to angle the keyboard. This isn’t a massive issue since the chassis angles upward at a slight angle

The Glorious software (only for Windows, sorry Mac users) used for changing lighting and programming macros is stable and intuitive, but you came to the wrong house if you wanted a keyboard with more complex RGB patterns. This is a little disappointing, but the GMMK Pro isn’t specifically geared toward the audience that finds that aspect particularly important. In fact, Glorious only offers two sets of shine-through keycaps but nine sets of keycaps that are either solid colors or gradients.

A sturdy DIY keyboard with a lot of potential

 I'd gotten addicted to it when I had another that came with one out of the box.  SO, I knew Glorious was on the list. And once failure had reared it's ugly buttocks at me, Glorious got the call.  Call might be an understatement, but what is NOT understated is the heft of this keeb

  Ok, so I've upgraded and built 2 keebs so far. The GMMK Pro was high on my list after I'd tried, and failed, another out-of-the-box non-option. Time to get more custom.

 Time to get more custom...and along came the highly-popular GMMK Pro, mostly because I couldn't find a reasonable 100% and I wanted a rotary encoder

 I'm sure a silverback or wannabe will argue this point, but listen..."It just works" should be the mantra of EVERYONE in tech

Mac config pains, but now a solid, quiet keeb

i decided on the Glorious GMMK Pro since i really like the layout and i feel its a good entry to start with. 

So what i need is more SMOOTH and less heavy switches! also i want them to be accessible in the market and not overpriced

i currently own Epomaker GK68X, i guess it's good for the budget but i am into more premium feeling stuff with great built quality and aluminum frame. My current switches are Gateron blacks!

 I had no fitment issues putting in the durock v2s. Honestly for the price, just get those so you don't have to disassemble your whole bored again later.

 I think the price is totally worth it!  I did end up buying the durock v2 stabilizers here on Amazon and I think that upgrade is a must before you assemble your board. The stock stabilizers were over lubed and just not great. I had no fitment issues putting in the durock v2s. Honestly for the price, just get those so you don't have to disassemble your whole bored again later

My first custom keyboard!

 The replacement is exactly the same as the first and has the same issue, so that’s going to need some reworking on their side.. I think injection molded plates are the way to go when you’re planning on making a lot of them, but they’ll need to resolve some of these issues before it’s viable.

. It seems like alignment was a big focus here, which is interesting, since seamless cases tend to not have this issue much. Nevertheless refreshing to see, while certain enthusiast customs have pieces that slide all over the place.

 I want to drive this point home because some people were calling me a shill for saying some positive things. But if people are going to have such a blatant misunderstanding of how this works, then what’s even the point to turning down all of those free products and sponsorships, The GMMK Pro takes on a pretty safe design. It’s got some medium thick bezels to make room for The foam strips with moderately rounded corners., One weird thing I noticed was that the cutouts on the top are more rounded than I’m used to

Glorious GMMK Pro Review - Insane Value

Based on the comments I saw on my unboxing
stream, it seems like people wanted the GMMK

Pro to be an utter failure, but it really
isn’t.

It’s true that when a large outsider company
tries to make something for a niche hobby,

they usually fail, but it seems like they
did their research.

That doesn’t mean there aren’t shortcomings
though.

In this review, we’ll be covering the Glorious
GMMK Pro, and what it could mean for custom

As always, I purchased this with my own money
through the reservation sale.

To the best of my knowledge, Glorious has
no way to connect my order to the channel.

I want to drive this point home, because some
people were calling me a shill for saying

some positive things, but if people are going
to have such a blatant misunderstanding of

Glorious GMMK PRO vs KBDFans Tofu65 Solderable Customized Mechanical Keyboard DIY KIT

QUICK QUESTION!

You might also like