Hiking Boots/Shoes Recommendations?

Hiking boot recommendations?

Any recommendations for women's hiking shoes?

[Request] Hiking/outdoorsy style shoes that can handle lots of walking on concrete

Cold and wet weather hiking boots recommendations?

I am in need of a new pair of trail/hiking boots.

Hiking Boots for heavy use during the summer

Good pair of hiking shoes?

[Request] waterproof hiking shoes

[request] - Good quality walking shoes.

Hello Redditors. I'm in search of a classy yet extremely durable pair of hiking boots to take backpacking around the world for 12+ months with.

Hiking boots recommendations

Men's three season "urban hiker" (like Merrell MOAB but longer lasting)

BIFL Hiking boots for women

Hiking boots with good traction and can stand up to abuse.

Looking for a good pair of shoes for my weird feet

Request - Hiking Sandals

Request: Hiking Boots

Comfortable and cushiony shoes for walking on pavement 10KM/couple hours a day (UK)

Hiking sandals that last?

[Request] Powerful dishwasher with sanitize function?

I want the best god damned dishwasher money can buy.

Looking for the best, easiest to operate, cheapest dishwasher - Recommendation?

[Request] Best countertop dishwasher for reasonable price?

Can anyone recommend a good dishwasher?

Countertop/Portable Dishwasher

[Request] Dishwasher &lt;$1k Australian with QOL features and low water use

Dishwasher for Second Home

My friend bought a house with this KichenAid dishwasher from 1974. He says it works better than any of the other ones he has owned. He just has to convince his wife not to replace it.

What's a good Panel ready dishwasher under $1k?

Best socket set on the market $100-$150

[Request] Socket wrenches

I need a recommendation for a tool set that should last a lifetime. [Request]

Looking for a Mechanics tool set.

23 years later; GM Goodwrench socket set.

A Starter/Lifetime Tool set

Basic screwdriver set needed

Mechanic Tools that are BIFL

Trying to fill a tool roll for my truck and would like input on BFL tools like wrenches, pliers, socket sets, etc.

BIFL: Mastercraft ratchet set with lifetime warranty. Got it at 14, im 31. Went thru more abuse than you think!

Looking to upgrade my home hand tools

Was told to post this here. Husky 270pc toolset from Home Depot for $99, normally $199. Lifetime warranty too

[Request] Ratchet/Wrench/Etc tool set for home/bicycle/general use

Thoughts on a Honda Accord V6 2007?

2010 Honda Accord worth the buy?

Thoughts on a 2008 Honda accord v6 coupe EX-L?

2014 honda accord ??

After an initial round of research it seems like Honda Accord Hybrid is the right answer, but I want to pressure test that with you guys

2014 Accord V6 Touring (any thoughts?)

Which car ?

me again. 2010 2dr honda accord, 122k miles for $5,800. just want a reliable first car, thoughts?

Want to buy an Accord, any suggestions?

2020/2021 Honda Accord LX - Tell Me About Your Likes/Dislikes

Compact - Midsize suv

best small/midsize suv?

Looking for a used (06-14) reliable compact/mid-size SUV

compact/mid size suv

Midsize SUV

Recommendations for midsized SUVs to look at

Compact to Mid-Size SUV

Small to mid-size suv suggestions?

Midsize vehicle for three kids

Mid-Size SUV

Just tried a Lotus Elise Cup 250, driving impressions !

Dan Neil reviews Lotus Emira: As Good As It Gets

Considering a Lotus Elise - USA

How affordable are Lotus Elises from the 2005-2012 model year?

Lotus Exige Sport Final Edition review: farewell, Exige

I wanna know everything you know about a 2005 Lotus Elise

My Lotus Evora Review

Lotus retail sales up 24% in best performance for a decade

2022 Lotus Emira Looks to Be One of the Brand's Best

PURCHASING A LOTUS — Need Tips + Advice.

Looking for a good rpg/action adventure with a good story and good characters

Deep long rpgs?

Looking for a story-focused RPG

Looking for a complex RPG

Fantasy games with an detailed and immersive world?

[WSIB] I am in search for a open world RPG that will keep me busy for hundreds of hours.

Open world game with huge map, lots of things to do, and great graphics

WSIB Feeling a bit of an rpg lull and want something exciting like old school BioWare with a engaging story that doesn’t take 100 hours to play.

WSIB: long, immersive games with high quality storytelling and writing

looking for an open-world rpg

[WSIB] A turn based strategy game that isn’t 4X

Turn-based strategy game

Turn-based strategy games

[WSIB] Small-scale, medieval, strategy game, featuring pikemen and cavalry

(WSIB) Turn-based ”wargaming” game

[WSIB] Turn Based Strategy games

WSIB if I want a strategy game for dummies

WSIB Strategic Rpg

[WSIB] Good offline strategy/(ish) games?

What are some good "smaller scale to control, but still feel large scale battle" tactical / strategy games?

Bullet Hell-Type Games: Atomicrops vs. I, Dracula: Genesis vs. Others?

WSIB if i want a completely story driven indie game but have already played undertale and oneshot (preferably similar to those 2)

Post apocalyptic enthusiast, Underrail or Atom RPG?

[SIB] Undermine or Atomicrops

WSIB if I like "Run into things, need to grow in power/special items to move further so I come back after unlocking said element" type of games.

Blsoodborne or Resident evil 2 ?

What should I buy? Animal Crossing: New Horizons or Doom: Eternal

[WSIB] Fast-paced top-down roguelikes?

[SIB] I Hate Running Backwards or Planetary Dustoff? Or something else?

SIB Nuclear Throne?

What can you recommend for minimizing pores?

I know you can’t get rid of pores but I’m wondering is there anyway to make them smaller? I use La Roche Posay products. They keep my acne mostly at bay but I feel like my pores are just so large. Part of it is genetic, but just wondering if there’s anything else I can do at home to help. Thanks!

OPEN PORES- WHAT TO DO? IS THERE ANY PRODUCT I CAN USE?

What skincare products have you used that helped with large pores?

What is the best thing to use to tighten pores on your face?

Can anyone tell me why my pores are so huge and what I can do to minimize them?

How to reduce pores.

Hey guys, how do I make my pores not look like this? Info in comments (deleted and reposted for an error in the title)

Pores reduction tips?

Advice for shrinking pores on and around nose?

[sun care] sunscreen that doesn’t irritate rosacea and perioral dermatitis

[Sun Care] Looking for sunscreen that doesn't irritate Rosacea

Sunscreen recommendations for rosacea

Looking for a sunscreen for my acne prone skin.

[Sun Care] looking for a sunscreen that works well for people with Eczema.

Desperate for a good sunscreen

Looking for a Daily Suncreen

I’ve tried them all and I still can’t find my holy grail for my dry rosacea skin. Any other recommendations?

Sunscreen, eczema and makeup, Help [Sun care]

[Sun Care] Help with not being able to use Sunscreen

How can i stop a really greasy face?

How to best defeat oily skin?

Is there any long-lasting solution for oily face?

Oily Face -&gt; Wash Face -&gt; More Oily

Extremely oily skin

Y’all know some sort of cream or product I can buy to make my face less greasy looking?

super oily face help needed

Oily Skin— please help!

Really oily skin

How to have less oily skin?

Adrian Krebs

Johannes Engler

Tavis Lochhead

amazon.com

3BA Printing

Out of The Box Reviews

DIY Engineering

r/headphones

r/3Dprinting

I also see a lot of people reccomend the Prusia mk3s. OP, these are great printers but I want you to understand what you are paying for when you buy the printer. The I3 (bedflinger) design is one of the cheapest designs on the market and a Prusia mk3s probably costs about $500-$600 (US) in parts but the rest of the cost is people checking all the electrical components to see if they function properly, research and development into new iterations and for extensive, high quality customer support. If you buy the prebuilt then you will also be paying for someone to put the printer together and run a ~2 hour test print to make sure the thing works

I repair old electronics for fun, but I find broken parts often. I'd like to know a material type and printer that could print strong replacements pieces. For example, I have a Dreamcast controller with two broken triggers, if I could print replacements, that would be awesome.

Thank you.

<div class="md">I repair old electronics for fun, but I find broken parts often. I&#39;d like to know a material type and printer that could print strong replacements pieces. For example, I have a Dreamcast controller with two broken triggers, if I could print replacements, that would be awesome.

Thank you.

-Edit-

Wife said up to $2,000 AUD ($1,400 USD), which seems a bit much considering how awesome some of those cheaper printers look.

Maybe $1,000 USD all up printer, tax, shipping, materials, and some cool designs. Some of the models people have printed look as good as shop stuff, I&#39;m excited.
</div>

Wife just said "Get yourself a 3D printer for Christmas", I'm so excited, watching YouTube videos but I know nothing.

 I have been using this machine a lot for nearly two weeks now and I'm very happy with it.  Details:  I needed a 3D printer not as a hobby, but because I need to prototype enclosures for electronic devices. As such, I wanted something reliable, that would work right out of the box with minimal fussing. I also wanted to be able to print using ABS and be able to print supports with soluble material

 As such, I wanted something reliable, that would work right out of the box with minimal fussing. I also wanted to be able to print using ABS and be able to print supports with soluble material. Of course I didn't want to spend thousands. This printer is fully enclosed (helpful for ABS) and dual extruder for well under $1,000

 Of course I didn't want to spend thousands. This printer is fully enclosed (helpful for ABS) and dual extruder for well under $1,000. It arrived very well packaged with an excellent getting started guide (I recommend you read it and follow the directions - the english is excellent, no decryption required). It's sturdy and solid

Great printer with excellent support from the seller!

 I really wanted to like this printer but for the price, its just not worth it. You can get more functionality from a Chinese cloned printer that costs less than half the price of the creator pro.

 Also manual bed leveling with no option to upgrade to an automatic bed leveling system (refer to crap 8-bit board). I ended up returning it. I really wanted to like this printer but for the price, its just not worth it. You can get more functionality from a Chinese cloned printer that costs less than half the price of the creator pro

I really wanted to like this printer..

 I'm struggling to learn Cura for the BIBO and Sindoh's slicer was easy to pick up.  In terms of operational reliability, the Sindoh WAS at the top of my list before it broke itself. This Creator Pro is second on the list. I haven't had the BIBO for very long so it still gets babysat closely

 The included plate stickers work well, I haven't had any issues with prints not sticking or sticking too well to them.  Since this utilizes Flashprint slicer, I picked that right up since the Finder utilizes that slicer. I'm struggling to learn Cura for the BIBO and Sindoh's slicer was easy to pick up.  In terms of operational reliability, the Sindoh WAS at the top of my list before it broke itself

 If I step outside of the studio room, I can easily hear the Creator Pro, and faintly hear the BIBO. If I go upstairs, I can't hear the BIBO, but the Creator Pro's noises can faintly be heard through the HVAC vents. You won't notice it if there's white noise upstairs, but if the house is quiet, you'll hear the Creator Pro running no matter where you are in the house.  All said and done though, I don't regret buying this printer and would recommend it to a beginner who knows that 3D printers aren't magic boxes, and even an expert, given the community behind this printer and modifications available for it

Noisy but reliable, 4.4 stars

 11. Try to print things vertically. Vertical printing is always more accuarte. Even if some instruction states to print something flat, always flip it vertically

 The blue stock print surface works great. Don't listen to all the idiot's out there that recomend all kinds of other stuff, glass, PEI, Kapton, etc. The key is keeping your surface clean. Clean with denatured alcohol after each print

Great 3d printer

notebookcheck.net

Uncle Jessy

AkumaMods

Teaching Tech

Hobbyist Life

I'm looking for a printer under $500 but can stress a bit higher if it is worth it. I had my eye on the Phrozen sonic mini 4k for a long time but my friend bought one and it's been nothing but problems with it and customer service has not been good at all (as stated by him) with parts taking ages to ship over and various other problems with them. I have been waiting for another printer to be released that has the same or better PPI on a small resin printer but with a different company. Should I just wait for a few more months and hope a similiar machine comes out or pick up something like an Anycubic Photon Mono X with lower PPI?

Welcome back to another purchase megathread!

For a link to last month's post, see [here](https://www.reddit.com/r/3Dprinting/comments/n3utkd/purchase_advice_megathread_what_to_buy_who_to_buy/). Top comment was [/u/Sausage54](https://www.reddit.com/u/Sausage54/)'s 2021 Printer list [here](https://www.reddit.com/r/3Dprinting/comments/n3utkd/purchase_advice_megathread_what_to_buy_who_to_buy/gwsblc4).

This thread is meant to conglomerate purchase advice for both newcomers and people looking for additional machines. Keeping this discussion to one thread means less searching should anyone have questions that may already have been answered here, as well as more visibility to inquiries in general, as comments made here will be visible for the entire month stuck to the top of the sub, and then linked to in the next month's thread.

If you are new to 3D printing, and are unsure of what to ask, try to include the following in your posts as a minimum:

* Your budget, set at a numeric amount. Saying "cheap," or "money is not a problem" is not an answer people can do much with. 3D printers can cost $100, they can cost $10,000,000, and anywhere in between. A rough idea of what you're looking for is essential to figuring out anything else.
* Your country of residence.
* If you are willing to build the printer from a kit, and what your level of experience is with electronic maintenance and construction if so.
* What you wish to do with the printer.
* Any extenuating circumstances that would restrict you from using machines that would otherwise fit your needs (limited space for the printer, enclosure requirement, must be purchased through educational intermediary, etc).

While this is by no means an exhaustive list of what can be included in your posts, these questions should help paint enough of a picture to get started. Don't be afraid to ask more questions, and never worry about asking too many. The people posting in this thread are here because they want to give advice, and any questions you have answered may be useful to others later on, when they read through this thread looking for answers of their own. Everyone here was new once, so chances are whoever is replying to you has a good idea of how you feel currently.

Additionally, a quick word on print quality: Most FDM/FFF (that is, filament based) printers are capable of approximately the same tolerances and print appearance, as the biggest limiting factor is in the nature of extruded plastic. **Asking if a machine has "good prints," or saying "I don't expect the best quality for $xxx" isn't actually relevant for the most part** with regards to these machines. Should you need additional detail and higher tolerances, you may want to explore SLA, DLP, and other photoresin options, as those *do* offer an increase in overall quality. If you are interested in resin machines, make sure you are aware of [how to use them safely](https://www.reddit.com/r/3DPrinting/wiki/resinprinting#wiki_safety). For these safety reasons we don't usually recommend a resin printer as someone's first printer.

As always, if you're a newcomer to this community, welcome. If you're a regular, welcome back.

<div class="md">Welcome back to another purchase megathread!

For a link to last month&#39;s post, see <a href="https://www.reddit.com/r/3Dprinting/comments/n3utkd/purchase_advice_megathread_what_to_buy_who_to_buy/">here</a>. Top comment was <a href="https://www.reddit.com/u/Sausage54/">/u/Sausage54</a>&#39;s 2021 Printer list <a href="https://www.reddit.com/r/3Dprinting/comments/n3utkd/purchase_advice_megathread_what_to_buy_who_to_buy/gwsblc4">here</a>.

This thread is meant to conglomerate purchase advice for both newcomers and people looking for additional machines. Keeping this discussion to one thread means less searching should anyone have questions that may already have been answered here, as well as more visibility to inquiries in general, as comments made here will be visible for the entire month stuck to the top of the sub, and then linked to in the next month&#39;s thread.

If you are new to 3D printing, and are unsure of what to ask, try to include the following in your posts as a minimum:

<ul>
<li>Your budget, set at a numeric amount. Saying &quot;cheap,&quot; or &quot;money is not a problem&quot; is not an answer people can do much with. 3D printers can cost $100, they can cost $10,000,000, and anywhere in between. A rough idea of what you&#39;re looking for is essential to figuring out anything else.</li>
<li>Your country of residence.</li>
<li>If you are willing to build the printer from a kit, and what your level of experience is with electronic maintenance and construction if so.</li>
<li>What you wish to do with the printer.</li>
<li>Any extenuating circumstances that would restrict you from using machines that would otherwise fit your needs (limited space for the printer, enclosure requirement, must be purchased through educational intermediary, etc).</li>
</ul>

While this is by no means an exhaustive list of what can be included in your posts, these questions should help paint enough of a picture to get started. Don&#39;t be afraid to ask more questions, and never worry about asking too many. The people posting in this thread are here because they want to give advice, and any questions you have answered may be useful to others later on, when they read through this thread looking for answers of their own. Everyone here was new once, so chances are whoever is replying to you has a good idea of how you feel currently.

Additionally, a quick word on print quality: Most FDM/FFF (that is, filament based) printers are capable of approximately the same tolerances and print appearance, as the biggest limiting factor is in the nature of extruded plastic. Asking if a machine has &quot;good prints,&quot; or saying &quot;I don&#39;t expect the best quality for $xxx&quot; isn&#39;t actually relevant for the most part with regards to these machines. Should you need additional detail and higher tolerances, you may want to explore SLA, DLP, and other photoresin options, as those do offer an increase in overall quality. If you are interested in resin machines, make sure you are aware of <a href="https://www.reddit.com/r/3DPrinting/wiki/resinprinting#wiki_safety">how to use them safely</a>. For these safety reasons we don&#39;t usually recommend a resin printer as someone&#39;s first printer.

As always, if you&#39;re a newcomer to this community, welcome. If you&#39;re a regular, welcome back.
</div>

Purchase Advice Megathread: What To Buy, Who To Buy It From, And More, In June 2021

 So I decided to print these all with tune settings and make sure that we get the best results for them. Unfortunately, when I was removing them from the bed, some of the tails on a couple of these ripped off. But for the most part, the super high detail part, which is really the scales of this dragon print, and I'll link the file for this. This is basically a Dragon Ball Z, I'm probably going to butcher this name, Shinra, the dragon from Dragon Ball Z, and this was created by Kimbolt

 So, Frozen sent me this to review and basically get my feedback on. And for the most part, it hasn't been too bad of a machine. I will say that the Frozen Aqua Gray 4K resin that they sent with me, the first bottle seemed to have a separation issue, where the color was separating from the actual resin, so it wasn't really printing very well. So I had some issues with that, I don't think it was really a machine issue, because they sent me another bottle and everything seemed to be printing perfectly fine

 So that's pretty much what I base my prints off of normally because 90% of the people are going to just click Print and Go. And while that's not the best way to do things, that's usually the gold standard for everybody that's getting into 3D printing. They just want to print something right away. So usually they print in the 0

Phrozen Sonic Mini 4k review

 Hello everyone, it's Matt from Akuma Mods, back again with our review of the Frozen Sonic Mini 4K.

 I know it's been a while since I had this unit, it's probably been almost a month if not more.

 So my apologies for not getting back to you, but I've just been so busy with everything.

 So, yeah, without further ado, let's get into this.

 So, Frozen sent me this to review and basically get my feedback on.

 And for the most part, it hasn't been too bad of a machine.

 I will say that the Frozen Aqua Gray 4K resin that they sent with me,

 the first bottle seemed to have a separation issue, where the color was separating from the actual resin,

 So I had some issues with that, I don't think it was really a machine issue,

 because they sent me another bottle and everything seemed to be printing perfectly fine.

 And I didn't have any issues from then on.

 Also, switching to different style resins seemed to be perfectly fine, I didn't have any issues with that.

 So, really the biggest thing about this is, you know, the 4K.

 Is it truly that much of a big difference when it comes to printing?

 And in my personal experience, you know, it's minimalistic at best.

 And I say that because, well, I have three prints here,

 and I'm sorry because my camera doesn't really focus very well or get into the light,

 but I can share these photos if you guys want me to.

 But basically, we have three different resin prints.

 Well, they're not different, they're all the same, but from three different printers.

 So we have one from the Sonic Mini 4K, we also have one from the Creality LDR,

 And then we also have one from the Creality LDH, which is a monochrome screen.

 So it's a 6.08 screen, or 6.1, I forget which one it is, but it's a monochrome screen.

 So, I don't know if you guys can see that or if my camera's picking it up,

 but you can see there's different variations of each and every one.

 You got one that's a little bit more shiny, one that's a little bit dulled,

 and then one that's really, really dulled out.

 Now, I thought that was kind of interesting because each and every screen

Flashforge Creator Pro vs Phrozen Sonic Mini 4K

QUICK QUESTION!

You might also like