Hiking Boots/Shoes Recommendations?

Hiking boot recommendations?

Any recommendations for women's hiking shoes?

[Request] Hiking/outdoorsy style shoes that can handle lots of walking on concrete

Cold and wet weather hiking boots recommendations?

I am in need of a new pair of trail/hiking boots.

Hiking Boots for heavy use during the summer

Good pair of hiking shoes?

[Request] waterproof hiking shoes

[request] - Good quality walking shoes.

Hello Redditors. I'm in search of a classy yet extremely durable pair of hiking boots to take backpacking around the world for 12+ months with.

Hiking boots recommendations

Men's three season "urban hiker" (like Merrell MOAB but longer lasting)

BIFL Hiking boots for women

Hiking boots with good traction and can stand up to abuse.

Looking for a good pair of shoes for my weird feet

Request - Hiking Sandals

Request: Hiking Boots

Comfortable and cushiony shoes for walking on pavement 10KM/couple hours a day (UK)

Hiking sandals that last?

[Request] Powerful dishwasher with sanitize function?

I want the best god damned dishwasher money can buy.

Looking for the best, easiest to operate, cheapest dishwasher - Recommendation?

[Request] Best countertop dishwasher for reasonable price?

Can anyone recommend a good dishwasher?

Countertop/Portable Dishwasher

[Request] Dishwasher &lt;$1k Australian with QOL features and low water use

Dishwasher for Second Home

My friend bought a house with this KichenAid dishwasher from 1974. He says it works better than any of the other ones he has owned. He just has to convince his wife not to replace it.

What's a good Panel ready dishwasher under $1k?

Best socket set on the market $100-$150

[Request] Socket wrenches

I need a recommendation for a tool set that should last a lifetime. [Request]

Looking for a Mechanics tool set.

23 years later; GM Goodwrench socket set.

A Starter/Lifetime Tool set

Basic screwdriver set needed

Mechanic Tools that are BIFL

Trying to fill a tool roll for my truck and would like input on BFL tools like wrenches, pliers, socket sets, etc.

BIFL: Mastercraft ratchet set with lifetime warranty. Got it at 14, im 31. Went thru more abuse than you think!

Looking to upgrade my home hand tools

Was told to post this here. Husky 270pc toolset from Home Depot for $99, normally $199. Lifetime warranty too

[Request] Ratchet/Wrench/Etc tool set for home/bicycle/general use

Thoughts on a Honda Accord V6 2007?

2010 Honda Accord worth the buy?

Thoughts on a 2008 Honda accord v6 coupe EX-L?

2014 honda accord ??

After an initial round of research it seems like Honda Accord Hybrid is the right answer, but I want to pressure test that with you guys

2014 Accord V6 Touring (any thoughts?)

Which car ?

me again. 2010 2dr honda accord, 122k miles for $5,800. just want a reliable first car, thoughts?

Want to buy an Accord, any suggestions?

2020/2021 Honda Accord LX - Tell Me About Your Likes/Dislikes

Compact - Midsize suv

best small/midsize suv?

Looking for a used (06-14) reliable compact/mid-size SUV

compact/mid size suv

Midsize SUV

Recommendations for midsized SUVs to look at

Compact to Mid-Size SUV

Small to mid-size suv suggestions?

Midsize vehicle for three kids

Mid-Size SUV

Just tried a Lotus Elise Cup 250, driving impressions !

Dan Neil reviews Lotus Emira: As Good As It Gets

Considering a Lotus Elise - USA

How affordable are Lotus Elises from the 2005-2012 model year?

Lotus Exige Sport Final Edition review: farewell, Exige

I wanna know everything you know about a 2005 Lotus Elise

My Lotus Evora Review

Lotus retail sales up 24% in best performance for a decade

2022 Lotus Emira Looks to Be One of the Brand's Best

PURCHASING A LOTUS — Need Tips + Advice.

Looking for a good rpg/action adventure with a good story and good characters

Deep long rpgs?

Looking for a story-focused RPG

Looking for a complex RPG

Fantasy games with an detailed and immersive world?

[WSIB] I am in search for a open world RPG that will keep me busy for hundreds of hours.

Open world game with huge map, lots of things to do, and great graphics

WSIB Feeling a bit of an rpg lull and want something exciting like old school BioWare with a engaging story that doesn’t take 100 hours to play.

WSIB: long, immersive games with high quality storytelling and writing

looking for an open-world rpg

[WSIB] A turn based strategy game that isn’t 4X

Turn-based strategy game

Turn-based strategy games

[WSIB] Small-scale, medieval, strategy game, featuring pikemen and cavalry

(WSIB) Turn-based ”wargaming” game

[WSIB] Turn Based Strategy games

WSIB if I want a strategy game for dummies

WSIB Strategic Rpg

[WSIB] Good offline strategy/(ish) games?

What are some good "smaller scale to control, but still feel large scale battle" tactical / strategy games?

Bullet Hell-Type Games: Atomicrops vs. I, Dracula: Genesis vs. Others?

WSIB if i want a completely story driven indie game but have already played undertale and oneshot (preferably similar to those 2)

Post apocalyptic enthusiast, Underrail or Atom RPG?

[SIB] Undermine or Atomicrops

WSIB if I like "Run into things, need to grow in power/special items to move further so I come back after unlocking said element" type of games.

Blsoodborne or Resident evil 2 ?

What should I buy? Animal Crossing: New Horizons or Doom: Eternal

[WSIB] Fast-paced top-down roguelikes?

[SIB] I Hate Running Backwards or Planetary Dustoff? Or something else?

SIB Nuclear Throne?

What can you recommend for minimizing pores?

I know you can’t get rid of pores but I’m wondering is there anyway to make them smaller? I use La Roche Posay products. They keep my acne mostly at bay but I feel like my pores are just so large. Part of it is genetic, but just wondering if there’s anything else I can do at home to help. Thanks!

OPEN PORES- WHAT TO DO? IS THERE ANY PRODUCT I CAN USE?

What skincare products have you used that helped with large pores?

What is the best thing to use to tighten pores on your face?

Can anyone tell me why my pores are so huge and what I can do to minimize them?

How to reduce pores.

Hey guys, how do I make my pores not look like this? Info in comments (deleted and reposted for an error in the title)

Pores reduction tips?

Advice for shrinking pores on and around nose?

[sun care] sunscreen that doesn’t irritate rosacea and perioral dermatitis

[Sun Care] Looking for sunscreen that doesn't irritate Rosacea

Sunscreen recommendations for rosacea

Looking for a sunscreen for my acne prone skin.

[Sun Care] looking for a sunscreen that works well for people with Eczema.

Desperate for a good sunscreen

Looking for a Daily Suncreen

I’ve tried them all and I still can’t find my holy grail for my dry rosacea skin. Any other recommendations?

Sunscreen, eczema and makeup, Help [Sun care]

[Sun Care] Help with not being able to use Sunscreen

How can i stop a really greasy face?

How to best defeat oily skin?

Is there any long-lasting solution for oily face?

Oily Face -&gt; Wash Face -&gt; More Oily

Extremely oily skin

Y’all know some sort of cream or product I can buy to make my face less greasy looking?

super oily face help needed

Oily Skin— please help!

Really oily skin

How to have less oily skin?

Adrian Krebs

Johannes Engler

Tavis Lochhead

tom's Hardware

If you&rsquo;re getting into resin 3D printing for the first time, you have an overwhelming number of options and price points. The good news for beginners is you don&rsquo;t have to sacrifice your budget for quality. You can find the easy-to-use Mars 2 Pro on sale for as little as $200. 
Its smaller build volume is perfect for gaming miniatures and trinkets but not larger models. And though its 2k resolution may not be the most detailed among resin printers, it is miles ahead of the quality you can achieve with a filament-based machine.
The Mars 2 Pro comes with a built-in filter system that I found really helps with fumes associated with resin printing. Its spring-loaded self-leveling build platforms is hands down the easiest system we&rsquo;ve ever used.
More: Elegoo Mars 2 Pro 3D Printer Review

amazon.com

techradar.com

Thomas Lightle

Hellstorm Wargaming

r/3Dprinting

r/prusa3d

r/Leathercraft

For 3D printers, I would recommend an Elegoo Mars (any in the series). They are inexpensive, easy to use, and achieve really great detail with little effort. This is my go-to printer, and is the one I tried making my maker's mark stamps on. Great printer

 So if you are looking for a cheap, easy, reliable option, I would look into purchasing a brass stamp from an Etsy seller. There are many who make them, and prices are competitive (There were some sellers with offerings of around $20). I'm sure you could find a good deal. The only thing you would need to send them is an image of what you would like to have on the stamp

I was contemplating getting a 3d printer and  was wondering if it would be possible to use it for stamp creation rather than paying a ton of money for a metal one being made.

anybody have any practical knowledge in doing this and what kind of equipment would be best suited to achieve this?

<div class="md">I was contemplating getting a 3d printer and was wondering if it would be possible to use it for stamp creation rather than paying a ton of money for a metal one being made.

anybody have any practical knowledge in doing this and what kind of equipment would be best suited to achieve this?
</div>

Stamp creation with 3d printer worth looking into?

 I've been looking at the Elegoo Mars Pro 2, and the accompanying Elegoo Mercury Plus washing machine. Also the Anycubic Photon. Basically I'm here so someone can tell me what's a better option in the price range, if any.

 Basically I'm here so someone can tell me what's a better option in the price range, if any.

 Happy New Year everyone! Welcome back to another purchase megathread!

For a link to last month's post, see [here](https://www.reddit.com/r/3Dprinting/comments/lv818a/purchase_advice_megathread_what_to_buy_who_to_buy/). Top comment was /u/Sausage54's 2021 Printer list [here](https://www.reddit.com/r/3Dprinting/comments/lv818a/purchase_advice_megathread_what_to_buy_who_to_buy/gpakpuq).

This thread is meant to conglomerate purchase advice for both newcomers and people looking for additional machines. Keeping this discussion to one thread means less searching should anyone have questions that may already have been answered here, as well as more visibility to inquiries in general, as comments made here will be visible for the entire month stuck to the top of the sub, and then linked to in the next month's thread.

If you are new to 3D printing, and are unsure of what to ask, try to include the following in your posts as a minimum:

* Your budget, set at a numeric amount. Saying "cheap," or "money is not a problem" is not an answer people can do much with. 3D printers can cost $100, they can cost $10,000,000, and anywhere in between. A rough idea of what you're looking for is essential to figuring out anything else.
* Your country of residence.
* If you are willing to build the printer from a kit, and what your level of experience is with electronic maintenance and construction if so.
* What you wish to do with the printer.
* Any extenuating circumstances that would restrict you from using machines that would otherwise fit your needs (limited space for the printer, enclosure requirement, must be purchased through educational intermediary, etc).

While this is by no means an exhaustive list of what can be included in your posts, these questions should help paint enough of a picture to get started. Don't be afraid to ask more questions, and never worry about asking too many. The people posting in this thread are here because they want to give advice, and any questions you have answered may be useful to others later on, when they read through this thread looking for answers of their own. Everyone here was new once, so chances are whoever is replying to you has a good idea of how you feel currently.

Additionally, a quick word on print quality: Most FDM/FFF (that is, filament based) printers are capable of approximately the same tolerances and print appearance, as the biggest limiting factor is in the nature of extruded plastic. **Asking if a machine has "good prints," or saying "I don't expect the best quality for $xxx" isn't actually relevant for the most part** with regards to these machines. Should you need additional detail and higher tolerances, you may want to explore SLA, DLP, and other photoresin options, as those *do* offer an increase in overall quality. If you are interested in resin machines, make sure you are aware of [how to use them safely](https://www.reddit.com/r/3DPrinting/wiki/resinprinting#wiki_safety). For these safety reasons we don't usually recommend a resin printer as someone's first printer.

As always, if you're a newcomer to this community, welcome. If you're a regular, welcome back.

<div class="md">Happy New Year everyone! Welcome back to another purchase megathread!

For a link to last month&#39;s post, see <a href="https://www.reddit.com/r/3Dprinting/comments/lv818a/purchase_advice_megathread_what_to_buy_who_to_buy/">here</a>. Top comment was <a href="/u/Sausage54">/u/Sausage54</a>&#39;s 2021 Printer list <a href="https://www.reddit.com/r/3Dprinting/comments/lv818a/purchase_advice_megathread_what_to_buy_who_to_buy/gpakpuq">here</a>.

This thread is meant to conglomerate purchase advice for both newcomers and people looking for additional machines. Keeping this discussion to one thread means less searching should anyone have questions that may already have been answered here, as well as more visibility to inquiries in general, as comments made here will be visible for the entire month stuck to the top of the sub, and then linked to in the next month&#39;s thread.

If you are new to 3D printing, and are unsure of what to ask, try to include the following in your posts as a minimum:

<ul>
<li>Your budget, set at a numeric amount. Saying &quot;cheap,&quot; or &quot;money is not a problem&quot; is not an answer people can do much with. 3D printers can cost $100, they can cost $10,000,000, and anywhere in between. A rough idea of what you&#39;re looking for is essential to figuring out anything else.</li>
<li>Your country of residence.</li>
<li>If you are willing to build the printer from a kit, and what your level of experience is with electronic maintenance and construction if so.</li>
<li>What you wish to do with the printer.</li>
<li>Any extenuating circumstances that would restrict you from using machines that would otherwise fit your needs (limited space for the printer, enclosure requirement, must be purchased through educational intermediary, etc).</li>
</ul>

While this is by no means an exhaustive list of what can be included in your posts, these questions should help paint enough of a picture to get started. Don&#39;t be afraid to ask more questions, and never worry about asking too many. The people posting in this thread are here because they want to give advice, and any questions you have answered may be useful to others later on, when they read through this thread looking for answers of their own. Everyone here was new once, so chances are whoever is replying to you has a good idea of how you feel currently.

Additionally, a quick word on print quality: Most FDM/FFF (that is, filament based) printers are capable of approximately the same tolerances and print appearance, as the biggest limiting factor is in the nature of extruded plastic. Asking if a machine has &quot;good prints,&quot; or saying &quot;I don&#39;t expect the best quality for $xxx&quot; isn&#39;t actually relevant for the most part with regards to these machines. Should you need additional detail and higher tolerances, you may want to explore SLA, DLP, and other photoresin options, as those do offer an increase in overall quality. If you are interested in resin machines, make sure you are aware of <a href="https://www.reddit.com/r/3DPrinting/wiki/resinprinting#wiki_safety">how to use them safely</a>. For these safety reasons we don&#39;t usually recommend a resin printer as someone&#39;s first printer.

As always, if you&#39;re a newcomer to this community, welcome. If you&#39;re a regular, welcome back.
</div>

Purchase Advice Megathread: What To Buy, Who To Buy It From, And More, In April 2021

My kids school was going to throw away 2 MP10's and a Elegoo Mars Pro resin printer. Their teacher gave them to me for free with about $100 worth of resin,  and a "have fun!". After a LCD screen, a good cleaning, tightening, and a bed level, I now have 3 perfectly working printers to compliment my Anycubic's. $17 bucks, it's work every penny

 After a LCD screen, a good cleaning, tightening, and a bed level, I now have 3 perfectly working printers to compliment my Anycubic's. $17 bucks, it's work every penny.

Good deal for $17 each as a project?

 They give you two replacement fep sheets, most of the time, you're lucky if a manufacturer ships, the printer with any spares at all two spares goes above and beyond and is greatly appreciated. They were generous with the amount of gloves and strainers provided in the package. It'S almost like, they don't want lack of supplies to get in the way of your printing experience, and i appreciate that build quality. The aluminum and steel construction of this printer definitely gives it a quality feel and, in my opinion, contributes to its quietness and operation

Hello, everybody welcome back to my shop. The resin printer market is full of competition, saying that their machine is the best but who's to say for sure, elegu's, mars ii. Pro is their premium model in the six inch category and i'm not going to beat around the bush here. This is a very solid machine

 This printer produces flawless prints straight out of the box using the default profile in chittabox. All you have to do is slice and print and you're good to go. The prints come out exactly as they appear in the slicer, with no printing artifacts and virtually no layer lines. I tend to find resin printing somewhat frustrating and unpredictable, but my experience with the mars 2 pro has been the opposite

 The build plate and resin vat are also made of solid aluminum, and the z-axis arm and tower are made of thicker material when compared to the competition i mean even the hex wrenches are noticeably higher quality when compared to the competition lagoon, spares no expense to make Sure the components are quality and it shows in this printer quiet operation. This printer is quiet, the z-axis motor is virtually silent and really the only thing you hear in a quiet room is the exhaust fan with the lid gasket on the fan. Noise is practically imperceptible as well. I have owned many printers and the lagoo mars

 It'S almost like, they don't want lack of supplies to get in the way of your printing experience, and i appreciate that build quality. The aluminum and steel construction of this printer definitely gives it a quality feel and, in my opinion, contributes to its quietness and operation. The build plate and resin vat are also made of solid aluminum, and the z-axis arm and tower are made of thicker material when compared to the competition i mean even the hex wrenches are noticeably higher quality when compared to the competition lagoon, spares no expense to make Sure the components are quality and it shows in this printer quiet operation. This printer is quiet, the z-axis motor is virtually silent and really the only thing you hear in a quiet room is the exhaust fan with the lid gasket on the fan

Wow! Elegoo Mars 2 Pro Review - Why it is the best.

 Secondly, my rubber seal lasted just about two prints. Before i threw it away, i found it dragged against the tri-clamps, pulling free and taking unwanted baths in the resin. So, to my mind, if eliku really wants a proper working seal on this lid, they need something a little better than this flimsy effort. There'S also the issue of the fan

Elegoo Mars 2 Pro HONEST review + Mars original comparison - by VOG (VegOilGuy)

sainsmart.com

pcmag.com

Ender 3 max: Bigger build volume, pretty nice updates with the added yellow springs and metal extruder/filament sensor.  screen is ok but i dont really like that the power supply is in on the printer and not out of side, But i should be able to change that right? 

These printers are all around the same price range is my country ( below 300 euros, Netherlands) and i mainly want to experiment with them, print some fun stuff and get a good deal. 

 I had to extend them using the old ones.  Once replaced, I improved the head strain relief to reduce the risk of reoccurrence by designing a strain relief plate that attaches to the deck. Now it operates smoothly and hasn't broken since. It attaches with no screws or adhesive, but slips into place and stays put

Broke after 40 hours of use, otherwise excellent.

 My family owns 4 Creality printers and this one was the worst, I have too assume that they have really let their quality control go down hill and that’s too bad, I’m not sure if I will buy another..

 Well I have had plenty of problems with this one for sure, it was poorly assembled,the hotend was damaged out of the box and nothing would stick to the glass print surface and the shaft on the extruder motor was bent. After replacing all of these parts I finally have it working as it should. My family owns 4 Creality printers and this one was the worst, I have too assume that they have really let their quality control go down hill and that’s too bad, I’m not sure if I will buy another.

Needs work

notebookcheck.net

stamped

Best for Most

Elegoo Mars 2 Pro vs Creality Ender 3 Max

Reviews by Topic

Reliability

QUICK QUESTION!

You might also like