Hiking Boots/Shoes Recommendations?

Hiking boot recommendations?

Any recommendations for women's hiking shoes?

[Request] Hiking/outdoorsy style shoes that can handle lots of walking on concrete

Cold and wet weather hiking boots recommendations?

I am in need of a new pair of trail/hiking boots.

Hiking Boots for heavy use during the summer

Good pair of hiking shoes?

[Request] waterproof hiking shoes

[request] - Good quality walking shoes.

Hello Redditors. I'm in search of a classy yet extremely durable pair of hiking boots to take backpacking around the world for 12+ months with.

Hiking boots recommendations

Men's three season "urban hiker" (like Merrell MOAB but longer lasting)

BIFL Hiking boots for women

Hiking boots with good traction and can stand up to abuse.

Looking for a good pair of shoes for my weird feet

Request - Hiking Sandals

Request: Hiking Boots

Comfortable and cushiony shoes for walking on pavement 10KM/couple hours a day (UK)

Hiking sandals that last?

[Request] Powerful dishwasher with sanitize function?

I want the best god damned dishwasher money can buy.

Looking for the best, easiest to operate, cheapest dishwasher - Recommendation?

[Request] Best countertop dishwasher for reasonable price?

Can anyone recommend a good dishwasher?

Countertop/Portable Dishwasher

[Request] Dishwasher &lt;$1k Australian with QOL features and low water use

Dishwasher for Second Home

My friend bought a house with this KichenAid dishwasher from 1974. He says it works better than any of the other ones he has owned. He just has to convince his wife not to replace it.

What's a good Panel ready dishwasher under $1k?

Best socket set on the market $100-$150

[Request] Socket wrenches

I need a recommendation for a tool set that should last a lifetime. [Request]

Looking for a Mechanics tool set.

23 years later; GM Goodwrench socket set.

A Starter/Lifetime Tool set

Basic screwdriver set needed

Mechanic Tools that are BIFL

Trying to fill a tool roll for my truck and would like input on BFL tools like wrenches, pliers, socket sets, etc.

BIFL: Mastercraft ratchet set with lifetime warranty. Got it at 14, im 31. Went thru more abuse than you think!

Looking to upgrade my home hand tools

Was told to post this here. Husky 270pc toolset from Home Depot for $99, normally $199. Lifetime warranty too

[Request] Ratchet/Wrench/Etc tool set for home/bicycle/general use

Thoughts on a Honda Accord V6 2007?

2010 Honda Accord worth the buy?

Thoughts on a 2008 Honda accord v6 coupe EX-L?

2014 honda accord ??

After an initial round of research it seems like Honda Accord Hybrid is the right answer, but I want to pressure test that with you guys

2014 Accord V6 Touring (any thoughts?)

Which car ?

me again. 2010 2dr honda accord, 122k miles for $5,800. just want a reliable first car, thoughts?

Want to buy an Accord, any suggestions?

2020/2021 Honda Accord LX - Tell Me About Your Likes/Dislikes

Compact - Midsize suv

best small/midsize suv?

Looking for a used (06-14) reliable compact/mid-size SUV

compact/mid size suv

Midsize SUV

Recommendations for midsized SUVs to look at

Compact to Mid-Size SUV

Small to mid-size suv suggestions?

Midsize vehicle for three kids

Mid-Size SUV

Just tried a Lotus Elise Cup 250, driving impressions !

Dan Neil reviews Lotus Emira: As Good As It Gets

Considering a Lotus Elise - USA

How affordable are Lotus Elises from the 2005-2012 model year?

Lotus Exige Sport Final Edition review: farewell, Exige

I wanna know everything you know about a 2005 Lotus Elise

My Lotus Evora Review

Lotus retail sales up 24% in best performance for a decade

2022 Lotus Emira Looks to Be One of the Brand's Best

PURCHASING A LOTUS — Need Tips + Advice.

Looking for a good rpg/action adventure with a good story and good characters

Deep long rpgs?

Looking for a story-focused RPG

Looking for a complex RPG

Fantasy games with an detailed and immersive world?

[WSIB] I am in search for a open world RPG that will keep me busy for hundreds of hours.

Open world game with huge map, lots of things to do, and great graphics

WSIB Feeling a bit of an rpg lull and want something exciting like old school BioWare with a engaging story that doesn’t take 100 hours to play.

WSIB: long, immersive games with high quality storytelling and writing

looking for an open-world rpg

[WSIB] A turn based strategy game that isn’t 4X

Turn-based strategy game

Turn-based strategy games

[WSIB] Small-scale, medieval, strategy game, featuring pikemen and cavalry

(WSIB) Turn-based ”wargaming” game

[WSIB] Turn Based Strategy games

WSIB if I want a strategy game for dummies

WSIB Strategic Rpg

[WSIB] Good offline strategy/(ish) games?

What are some good "smaller scale to control, but still feel large scale battle" tactical / strategy games?

Bullet Hell-Type Games: Atomicrops vs. I, Dracula: Genesis vs. Others?

WSIB if i want a completely story driven indie game but have already played undertale and oneshot (preferably similar to those 2)

Post apocalyptic enthusiast, Underrail or Atom RPG?

[SIB] Undermine or Atomicrops

WSIB if I like "Run into things, need to grow in power/special items to move further so I come back after unlocking said element" type of games.

Blsoodborne or Resident evil 2 ?

What should I buy? Animal Crossing: New Horizons or Doom: Eternal

[WSIB] Fast-paced top-down roguelikes?

[SIB] I Hate Running Backwards or Planetary Dustoff? Or something else?

SIB Nuclear Throne?

What can you recommend for minimizing pores?

I know you can’t get rid of pores but I’m wondering is there anyway to make them smaller? I use La Roche Posay products. They keep my acne mostly at bay but I feel like my pores are just so large. Part of it is genetic, but just wondering if there’s anything else I can do at home to help. Thanks!

OPEN PORES- WHAT TO DO? IS THERE ANY PRODUCT I CAN USE?

What skincare products have you used that helped with large pores?

What is the best thing to use to tighten pores on your face?

Can anyone tell me why my pores are so huge and what I can do to minimize them?

How to reduce pores.

Hey guys, how do I make my pores not look like this? Info in comments (deleted and reposted for an error in the title)

Pores reduction tips?

Advice for shrinking pores on and around nose?

[sun care] sunscreen that doesn’t irritate rosacea and perioral dermatitis

[Sun Care] Looking for sunscreen that doesn't irritate Rosacea

Sunscreen recommendations for rosacea

Looking for a sunscreen for my acne prone skin.

[Sun Care] looking for a sunscreen that works well for people with Eczema.

Desperate for a good sunscreen

Looking for a Daily Suncreen

I’ve tried them all and I still can’t find my holy grail for my dry rosacea skin. Any other recommendations?

Sunscreen, eczema and makeup, Help [Sun care]

[Sun Care] Help with not being able to use Sunscreen

How can i stop a really greasy face?

How to best defeat oily skin?

Is there any long-lasting solution for oily face?

Oily Face -&gt; Wash Face -&gt; More Oily

Extremely oily skin

Y’all know some sort of cream or product I can buy to make my face less greasy looking?

super oily face help needed

Oily Skin— please help!

Really oily skin

How to have less oily skin?

Adrian Krebs

Johannes Engler

Tavis Lochhead

GENERAL SPECS: 
Technology: FDM
Mechanical arrangement: CoreXY

3D PRINTING PROPERTIES:
Accuracy: 0.1 mm
Layer height: 0.1 mm
Extruder type: Single nozzle
Max. build volume: 250 x 250 x 400 mm
Max. print speed: 150 mm/s
Closed print chamber: Yes (semi-enclosed, optional)
Print bed: Heated
Display: LCD color screen
Connectivity: SD card
Built-in camera: No
Resume print: Yes

MATERIALS:
Compatible materials: PLA

SOFTWARE:
Recommended slicer: Cura
Operating system: Windows, Mac, Linux
File types: STL, OBJ, 3MF

DIMENSIONS AND WEIGHT:
Frame dimensions: 495 x 495 x 650 mm
Weight: 30 kg

amazon.com

3D Printing Canada

Mech Solutions

r/3Dprinting

r/prusa3d

 Do you know anything with the under six? No, i don't know that's okay. Next time the inner six boasts a build speed of 150 millimeters a second now, that's pretty fast, that's uh, almost three times faster than the ender five and the inner three this uh. This is all thanks to the core xy platform that creality has built at the top of this printer. This is a well welcomed, upgrade that complements the increased build volume which will allow you to print faster in a bigger surface area

 I could say that i'm pretty happy with it. It was able to print really fast print larger, build volumes than the under five and your three and prints them in pretty high quality. I did realize that it is a quiet printer, but once the xy core kicks in it, definitely bumps up the volume a little bit now, whether noise matters to you or not. That is something to consider when looking to the under six that and the weight thanks to the four acrylic walls that make up this printer, i would recommend it to beginners that are looking for a printer with a little bit of a higher price point when compared To the other five or the nd3v2 that are looking for the additional features and the additional build volume, this printer definitely is capable of all of that

 This printer boasts a printing speed of 150 millimeters per second now, that's almost three times as fast as the ender 5 and pretty much any other and your series yeah yeah yeah right now, yeah yeah. You want to join the video you can join. Do you know anything with the under six? No, i don't know that's okay. Next time the inner six boasts a build speed of 150 millimeters a second now, that's pretty fast, that's uh, almost three times faster than the ender five and the inner three this uh

 The semi-enclosed build volume is great at protecting from drafts and other elements during the printing process when compared to its predecessor the ender 5. The ender 6 does a much better job at securing the build platform when secured to the z-axis. This is thanks to improved fabrication. On the joints on the lead screen, this helps to reduce the amount of flex on the build platform, while printing leading to better quality prints and who doesn't like better quality prints

Ender-6 Review and Comparison

 So very easy just drops right in here and that little pole in the back and you're going to take four of the m 5 by 25 screws. All right! We'Re going to turn this around to the back, where you can see the four provided pre-drilled holes in our extrusion here and make sure that's sitting in correctly, i'm going to come around the other side of the table here, guys all right now with this one should Be lined up just the way it sits. So let's see how it is. Yep, just kinda got ta pull back on it a little bit

 Now i'm just going to hang the printer off of the front a bit, so i can take the provided allen, wrench and take that m5 by 45. Get it started here, i'm going to thread in you know no need to over. Tighten these just make sure they're, nice and secure and then i'll take the second side all right. So next we're going to take the one with the breakout board on it

 It on top we've got that in place. I'M going to go ahead and take the m4 by 45 again and same process just install those i'm going to go around and do all four hand tighten first to make sure everything's lined up correctly, which is very important when building one of these. So if you find something's off a bit, you definitely wan na and once you've got them all threaded in go ahead and secure those down. Now, i'm just going to go around to all four corners and secure them all, okay, guys

 So if you find something's off a bit, you definitely wan na and once you've got them all threaded in go ahead and secure those down. Now, i'm just going to go around to all four corners and secure them all, okay, guys. So the next step we're going to attach the bed to the z-axis. Now you want to bring this plate low enough that it's going to be underneath the bed, so you can move it up to secure it after we get the bed attached to the z-rail

Creality Ender 6 Unboxing, Build & Test Prints

Then I started looking at the Ender 6. It’s not that much of an upgrade in terms of build volume (250 X 250 X 400) compared to my Ender 3 pro (220 X 220 X 250) but it is an improvement. I’m really interested in the CoreXY printing, but the lack of included BLtouch bums me out. 

Lastly- I’m looking at the CR-6 Max which had a 400x400x400 build volume and an automatic leveling system built into the hit end, so no extra sensor needs.  This tops out my budget but looks like the best of all worlds. 

Welcome back to another purchase megathread!

For a link to last month's post, see [here](https://www.reddit.com/r/3Dprinting/comments/pz948w/purchase_advice_megathread_what_to_buy_who_to_buy/). Top comment was [/u/Sausage54](https://www.reddit.com/u/Sausage54/)'s 2021 Printer list [here](https://www.reddit.com/r/3Dprinting/comments/pz948w/comment/hez8ul2/).

This thread is meant to conglomerate purchase advice for both newcomers and people looking for additional machines. Keeping this discussion to one thread means less searching should anyone have questions that may already have been answered here, as well as more visibility to inquiries in general, as comments made here will be visible for the entire month stuck to the top of the sub, and then linked to in the next month's thread.

If you are new to 3D printing, and are unsure of what to ask, try to include the following in your posts as a minimum:

* Your budget, set at a numeric amount. Saying "cheap," or "money is not a problem" is not an answer people can do much with. 3D printers can cost $100, they can cost $10,000,000, and anywhere in between. A rough idea of what you're looking for is essential to figuring out anything else.
* Your country of residence.
* If you are willing to build the printer from a kit, and what your level of experience is with electronic maintenance and construction if so.
* What you wish to do with the printer.
* Any extenuating circumstances that would restrict you from using machines that would otherwise fit your needs (limited space for the printer, enclosure requirement, must be purchased through educational intermediary, etc).

While this is by no means an exhaustive list of what can be included in your posts, these questions should help paint enough of a picture to get started. Don't be afraid to ask more questions, and never worry about asking too many. The people posting in this thread are here because they want to give advice, and any questions you have answered may be useful to others later on, when they read through this thread looking for answers of their own. Everyone here was new once, so chances are whoever is replying to you has a good idea of how you feel currently.

Additionally, a quick word on print quality: Most FDM/FFF (that is, filament based) printers are capable of approximately the same tolerances and print appearance, as the biggest limiting factor is in the nature of extruded plastic. **Asking if a machine has "good prints," or saying "I don't expect the best quality for $xxx" isn't actually relevant for the most part** with regards to these machines. Should you need additional detail and higher tolerances, you may want to explore SLA, DLP, and other photoresin options, as those *do* offer an increase in overall quality. If you are interested in resin machines, make sure you are aware of [how to use them safely](https://www.reddit.com/r/3DPrinting/wiki/resinprinting#wiki_safety). For these safety reasons we don't usually recommend a resin printer as someone's first printer.

As always, if you're a newcomer to this community, welcome. If you're a regular, welcome back.

<div class="md">Welcome back to another purchase megathread!

For a link to last month&#39;s post, see <a href="https://www.reddit.com/r/3Dprinting/comments/pz948w/purchase_advice_megathread_what_to_buy_who_to_buy/">here</a>. Top comment was <a href="https://www.reddit.com/u/Sausage54/">/u/Sausage54</a>&#39;s 2021 Printer list <a href="https://www.reddit.com/r/3Dprinting/comments/pz948w/comment/hez8ul2/">here</a>.

This thread is meant to conglomerate purchase advice for both newcomers and people looking for additional machines. Keeping this discussion to one thread means less searching should anyone have questions that may already have been answered here, as well as more visibility to inquiries in general, as comments made here will be visible for the entire month stuck to the top of the sub, and then linked to in the next month&#39;s thread.

If you are new to 3D printing, and are unsure of what to ask, try to include the following in your posts as a minimum:

<ul>
<li>Your budget, set at a numeric amount. Saying &quot;cheap,&quot; or &quot;money is not a problem&quot; is not an answer people can do much with. 3D printers can cost $100, they can cost $10,000,000, and anywhere in between. A rough idea of what you&#39;re looking for is essential to figuring out anything else.</li>
<li>Your country of residence.</li>
<li>If you are willing to build the printer from a kit, and what your level of experience is with electronic maintenance and construction if so.</li>
<li>What you wish to do with the printer.</li>
<li>Any extenuating circumstances that would restrict you from using machines that would otherwise fit your needs (limited space for the printer, enclosure requirement, must be purchased through educational intermediary, etc).</li>
</ul>

While this is by no means an exhaustive list of what can be included in your posts, these questions should help paint enough of a picture to get started. Don&#39;t be afraid to ask more questions, and never worry about asking too many. The people posting in this thread are here because they want to give advice, and any questions you have answered may be useful to others later on, when they read through this thread looking for answers of their own. Everyone here was new once, so chances are whoever is replying to you has a good idea of how you feel currently.

Additionally, a quick word on print quality: Most FDM/FFF (that is, filament based) printers are capable of approximately the same tolerances and print appearance, as the biggest limiting factor is in the nature of extruded plastic. Asking if a machine has &quot;good prints,&quot; or saying &quot;I don&#39;t expect the best quality for $xxx&quot; isn&#39;t actually relevant for the most part with regards to these machines. Should you need additional detail and higher tolerances, you may want to explore SLA, DLP, and other photoresin options, as those do offer an increase in overall quality. If you are interested in resin machines, make sure you are aware of <a href="https://www.reddit.com/r/3DPrinting/wiki/resinprinting#wiki_safety">how to use them safely</a>. For these safety reasons we don&#39;t usually recommend a resin printer as someone&#39;s first printer.

As always, if you&#39;re a newcomer to this community, welcome. If you&#39;re a regular, welcome back.
</div>

Purchase Advice Megathread - November

  There are few other issues to note related to usability: 1. The LCD display is big enough, but lot of unused space. Does not show the filename fully (or even decent length). It is common to have files named: MonsterTruck_Medium_1of3

  I have sent an email today to the company about the above issues. Will update this review if they respond.  There are few other issues to note related to usability: 1. The LCD display is big enough, but lot of unused space

Prints fine. Low quality parts

yotpo

notebookcheck.net

printedsolid.com

3D Printing Dorks

 It is just not worth it for having to just return it after that from what I know. like I said, fifty percent and fifty percent. If you're one of those fifty percent that is successful good it's gonna, it's gonna work. You're good, but if you're if you're that fifty percent that doesn't that doesn't have the machine work, you're just gonna be extremely disappointed with perusal like I was

Is the Prusa MMU2S Worth It? - My Final Conclusion

stamped

shopify

Creality Ender 6 vs Prusa I3 Mmu2s

Reviews by Topic

Reliability

QUICK QUESTION!

You might also like