Hiking Boots/Shoes Recommendations?

Hiking boot recommendations?

Any recommendations for women's hiking shoes?

[Request] Hiking/outdoorsy style shoes that can handle lots of walking on concrete

Cold and wet weather hiking boots recommendations?

I am in need of a new pair of trail/hiking boots.

Hiking Boots for heavy use during the summer

Good pair of hiking shoes?

[Request] waterproof hiking shoes

[request] - Good quality walking shoes.

Hello Redditors. I'm in search of a classy yet extremely durable pair of hiking boots to take backpacking around the world for 12+ months with.

Hiking boots recommendations

Men's three season "urban hiker" (like Merrell MOAB but longer lasting)

BIFL Hiking boots for women

Hiking boots with good traction and can stand up to abuse.

Looking for a good pair of shoes for my weird feet

Request - Hiking Sandals

Request: Hiking Boots

Comfortable and cushiony shoes for walking on pavement 10KM/couple hours a day (UK)

Hiking sandals that last?

[Request] Powerful dishwasher with sanitize function?

I want the best god damned dishwasher money can buy.

Looking for the best, easiest to operate, cheapest dishwasher - Recommendation?

[Request] Best countertop dishwasher for reasonable price?

Can anyone recommend a good dishwasher?

Countertop/Portable Dishwasher

[Request] Dishwasher &lt;$1k Australian with QOL features and low water use

Dishwasher for Second Home

My friend bought a house with this KichenAid dishwasher from 1974. He says it works better than any of the other ones he has owned. He just has to convince his wife not to replace it.

What's a good Panel ready dishwasher under $1k?

Best socket set on the market $100-$150

[Request] Socket wrenches

I need a recommendation for a tool set that should last a lifetime. [Request]

Looking for a Mechanics tool set.

23 years later; GM Goodwrench socket set.

A Starter/Lifetime Tool set

Basic screwdriver set needed

Mechanic Tools that are BIFL

Trying to fill a tool roll for my truck and would like input on BFL tools like wrenches, pliers, socket sets, etc.

BIFL: Mastercraft ratchet set with lifetime warranty. Got it at 14, im 31. Went thru more abuse than you think!

Looking to upgrade my home hand tools

Was told to post this here. Husky 270pc toolset from Home Depot for $99, normally $199. Lifetime warranty too

[Request] Ratchet/Wrench/Etc tool set for home/bicycle/general use

Thoughts on a Honda Accord V6 2007?

2010 Honda Accord worth the buy?

Thoughts on a 2008 Honda accord v6 coupe EX-L?

2014 honda accord ??

After an initial round of research it seems like Honda Accord Hybrid is the right answer, but I want to pressure test that with you guys

2014 Accord V6 Touring (any thoughts?)

Which car ?

me again. 2010 2dr honda accord, 122k miles for $5,800. just want a reliable first car, thoughts?

Want to buy an Accord, any suggestions?

2020/2021 Honda Accord LX - Tell Me About Your Likes/Dislikes

Compact - Midsize suv

best small/midsize suv?

Looking for a used (06-14) reliable compact/mid-size SUV

compact/mid size suv

Midsize SUV

Recommendations for midsized SUVs to look at

Compact to Mid-Size SUV

Small to mid-size suv suggestions?

Midsize vehicle for three kids

Mid-Size SUV

Just tried a Lotus Elise Cup 250, driving impressions !

Dan Neil reviews Lotus Emira: As Good As It Gets

Considering a Lotus Elise - USA

How affordable are Lotus Elises from the 2005-2012 model year?

Lotus Exige Sport Final Edition review: farewell, Exige

I wanna know everything you know about a 2005 Lotus Elise

My Lotus Evora Review

Lotus retail sales up 24% in best performance for a decade

2022 Lotus Emira Looks to Be One of the Brand's Best

PURCHASING A LOTUS — Need Tips + Advice.

Looking for a good rpg/action adventure with a good story and good characters

Deep long rpgs?

Looking for a story-focused RPG

Looking for a complex RPG

Fantasy games with an detailed and immersive world?

[WSIB] I am in search for a open world RPG that will keep me busy for hundreds of hours.

Open world game with huge map, lots of things to do, and great graphics

WSIB Feeling a bit of an rpg lull and want something exciting like old school BioWare with a engaging story that doesn’t take 100 hours to play.

WSIB: long, immersive games with high quality storytelling and writing

looking for an open-world rpg

[WSIB] A turn based strategy game that isn’t 4X

Turn-based strategy game

Turn-based strategy games

[WSIB] Small-scale, medieval, strategy game, featuring pikemen and cavalry

(WSIB) Turn-based ”wargaming” game

[WSIB] Turn Based Strategy games

WSIB if I want a strategy game for dummies

WSIB Strategic Rpg

[WSIB] Good offline strategy/(ish) games?

What are some good "smaller scale to control, but still feel large scale battle" tactical / strategy games?

Bullet Hell-Type Games: Atomicrops vs. I, Dracula: Genesis vs. Others?

WSIB if i want a completely story driven indie game but have already played undertale and oneshot (preferably similar to those 2)

Post apocalyptic enthusiast, Underrail or Atom RPG?

[SIB] Undermine or Atomicrops

WSIB if I like "Run into things, need to grow in power/special items to move further so I come back after unlocking said element" type of games.

Blsoodborne or Resident evil 2 ?

What should I buy? Animal Crossing: New Horizons or Doom: Eternal

[WSIB] Fast-paced top-down roguelikes?

[SIB] I Hate Running Backwards or Planetary Dustoff? Or something else?

SIB Nuclear Throne?

What can you recommend for minimizing pores?

I know you can’t get rid of pores but I’m wondering is there anyway to make them smaller? I use La Roche Posay products. They keep my acne mostly at bay but I feel like my pores are just so large. Part of it is genetic, but just wondering if there’s anything else I can do at home to help. Thanks!

OPEN PORES- WHAT TO DO? IS THERE ANY PRODUCT I CAN USE?

What skincare products have you used that helped with large pores?

What is the best thing to use to tighten pores on your face?

Can anyone tell me why my pores are so huge and what I can do to minimize them?

How to reduce pores.

Hey guys, how do I make my pores not look like this? Info in comments (deleted and reposted for an error in the title)

Pores reduction tips?

Advice for shrinking pores on and around nose?

[sun care] sunscreen that doesn’t irritate rosacea and perioral dermatitis

[Sun Care] Looking for sunscreen that doesn't irritate Rosacea

Sunscreen recommendations for rosacea

Looking for a sunscreen for my acne prone skin.

[Sun Care] looking for a sunscreen that works well for people with Eczema.

Desperate for a good sunscreen

Looking for a Daily Suncreen

I’ve tried them all and I still can’t find my holy grail for my dry rosacea skin. Any other recommendations?

Sunscreen, eczema and makeup, Help [Sun care]

[Sun Care] Help with not being able to use Sunscreen

How can i stop a really greasy face?

How to best defeat oily skin?

Is there any long-lasting solution for oily face?

Oily Face -&gt; Wash Face -&gt; More Oily

Extremely oily skin

Y’all know some sort of cream or product I can buy to make my face less greasy looking?

super oily face help needed

Oily Skin— please help!

Really oily skin

How to have less oily skin?

Adrian Krebs

Johannes Engler

Tavis Lochhead

amazon.com

notebookcheck.net

r/3Dprinting

r/prusa3d

I   have been wanting to move on to something that is a little less fussy than the gantry-style of the ender 3, and have been wanting a larger build volume, so the Ender 5 Plus has been pretty appealing to me.  Except that I think that many of the Ender 3 Pro upgrades that I've done will have to also be done to the Ender 5.    

 Happy New Year everyone! Welcome back to another purchase megathread!

For a link to last month's post, see [here](https://www.reddit.com/r/3Dprinting/comments/koaslp/purchase_advice_megathread_what_to_buy_who_to_buy/).

This thread is meant to conglomerate purchase advice for both newcomers and people looking for additional machines. Keeping this discussion to one thread means less searching should anyone have questions that may already have been answered here, as well as more visibility to inquiries in general, as comments made here will be visible for the entire month stuck to the top of the sub, and then linked to in the next month's thread.

If you are new to 3D printing, and are unsure of what to ask, try to include the following in your posts as a minimum:

* Your budget, set at a numeric amount. Saying "cheap," or "money is not a problem" is not an answer people can do much with. 3D printers can cost $100, they can cost $10,000,000, and anywhere in between. A rough idea of what you're looking for is essential to figuring out anything else.
* Your country of residence.
* If you are willing to build the printer from a kit, and what your level of experience is with electronic maintenance and construction if so.
* What you wish to do with the printer.
* Any extenuating circumstances that would restrict you from using machines that would otherwise fit your needs (limited space for the printer, enclosure requirement, must be purchased through educational intermediary, etc).

While this is by no means an exhaustive list of what can be included in your posts, these questions should help paint enough of a picture to get started. Don't be afraid to ask more questions, and never worry about asking too many. The people posting in this thread are here because they want to give advice, and any questions you have answered may be useful to others later on, when they read through this thread looking for answers of their own. Everyone here was new once, so chances are whoever is replying to you has a good idea of how you feel currently.

Additionally, a quick word on print quality: Most FDM/FFF (that is, filament based) printers are capable of approximately the same tolerances and print appearance, as the biggest limiting factor is in the nature of extruded plastic. **Asking if a machine has "good prints," or saying "I don't expect the best quality for $xxx" isn't actually relevant for the most part** with regards to these machines. Should you need additional detail and higher tolerances, you may want to explore SLA, DLP, and other photoresin options, as those *do* offer an increase in overall quality. If you are interested in resin machines, make sure you are aware of [how to use them safely](https://www.reddit.com/r/3DPrinting/wiki/resinprinting#wiki_safety). For these reasons we don't usually recommend a resin printer as someone's first printer.

As always, if you're a newcomer to this community, welcome. If you're a regular, welcome back.

<div class="md">Happy New Year everyone! Welcome back to another purchase megathread!

For a link to last month&#39;s post, see <a href="https://www.reddit.com/r/3Dprinting/comments/koaslp/purchase_advice_megathread_what_to_buy_who_to_buy/">here</a>.

This thread is meant to conglomerate purchase advice for both newcomers and people looking for additional machines. Keeping this discussion to one thread means less searching should anyone have questions that may already have been answered here, as well as more visibility to inquiries in general, as comments made here will be visible for the entire month stuck to the top of the sub, and then linked to in the next month&#39;s thread.

If you are new to 3D printing, and are unsure of what to ask, try to include the following in your posts as a minimum:

<ul>
<li>Your budget, set at a numeric amount. Saying &quot;cheap,&quot; or &quot;money is not a problem&quot; is not an answer people can do much with. 3D printers can cost $100, they can cost $10,000,000, and anywhere in between. A rough idea of what you&#39;re looking for is essential to figuring out anything else.</li>
<li>Your country of residence.</li>
<li>If you are willing to build the printer from a kit, and what your level of experience is with electronic maintenance and construction if so.</li>
<li>What you wish to do with the printer.</li>
<li>Any extenuating circumstances that would restrict you from using machines that would otherwise fit your needs (limited space for the printer, enclosure requirement, must be purchased through educational intermediary, etc).</li>
</ul>

While this is by no means an exhaustive list of what can be included in your posts, these questions should help paint enough of a picture to get started. Don&#39;t be afraid to ask more questions, and never worry about asking too many. The people posting in this thread are here because they want to give advice, and any questions you have answered may be useful to others later on, when they read through this thread looking for answers of their own. Everyone here was new once, so chances are whoever is replying to you has a good idea of how you feel currently.

Additionally, a quick word on print quality: Most FDM/FFF (that is, filament based) printers are capable of approximately the same tolerances and print appearance, as the biggest limiting factor is in the nature of extruded plastic. Asking if a machine has &quot;good prints,&quot; or saying &quot;I don&#39;t expect the best quality for $xxx&quot; isn&#39;t actually relevant for the most part with regards to these machines. Should you need additional detail and higher tolerances, you may want to explore SLA, DLP, and other photoresin options, as those do offer an increase in overall quality. If you are interested in resin machines, make sure you are aware of <a href="https://www.reddit.com/r/3DPrinting/wiki/resinprinting#wiki_safety">how to use them safely</a>. For these reasons we don&#39;t usually recommend a resin printer as someone&#39;s first printer.

As always, if you&#39;re a newcomer to this community, welcome. If you&#39;re a regular, welcome back.
</div>

Purchase Advice Megathread: What To Buy, Who To Buy It From, And More, In February 2021

 I decided to return that printer and replace it with the Ender 5 Plus mainly for the larger print volume. Assembling the 5 Plus took a bit of little time but nothing too complicated. The pieces seem to square up nicely when tightening the pieces together. The print quality, support, and adhesion are really good

 The pieces seem to square up nicely when tightening the pieces together. The print quality, support, and adhesion are really good. While printing, the adhesion works well to keep the piece in place. However, pulling the printed piece off the printer bed can be done without the need to pry it off (unlike the Sidewinder X2)

Almost perfect!  Great for cosplay!

It was my first 3D printer 6 years ago and in insight it was a piece of junk. I spent way to much money to make "reliable" it was not worthy. Rods were not straight (it's an understatement), PSU wasn't big enough to power everything on the printer at a reliable tension, it was burning heating cartridges and T° sensors for some reasons and ofc I had to use externals mossfets. Now I run an ender 5 plus for 1+ year and the reliability is on another level, I just send my print on my octopi server and I don't even feel the need to monitor the start of the print or fear it would randomly fail after 6hours of print for some random reasons

 Rods were not straight (it's an understatement), PSU wasn't big enough to power everything on the printer at a reliable tension, it was burning heating cartridges and T° sensors for some reasons and ofc I had to use externals mossfets. Now I run an ender 5 plus for 1+ year and the reliability is on another level, I just send my print on my octopi server and I don't even feel the need to monitor the start of the print or fear it would randomly fail after 6hours of print for some random reasons. And the only issue I had so far is a noisy fan. I would not recommend an Anet to my worst enemy as it could be seen as a murder  in case he died in his burning house later

Just got a (new to me) Anet A8! $80 well spent

BV3D: Bryan Vines

You should avoid the Ender 3 V2 you listed. Or avoid the Ender 3 series in general. That Ender 3 v2 is stupidly expensive for what it is worth at 280 dollars.

This is one of the hardest things I’ve ever had to write 
 
I’m getting an engineering degree snd this 3D printing stuff is literally harder than that

I have no clue where to start. There are so many facets to this stiff and I don’t know what I’m doing or what questions to ask or who to turn to. It’s really been a struggle for me 

How do I know what a good 3D printer is? This thing has good Amazon reviews but i don’t know 

https://www.amazon.com/dp/B07FFTHMMN/ref=cm_sw_r_cp_api_glt_fabc_NSR1CE53EN751NVJ4932?_encoding=UTF8&amp;psc=1

How do I use it?
How do I build it?
How do I calibrate it?
What software do I use to make 3D models?
How do I learn the software?
Is there open source Linux software?
How do I put the file on it to print?


And on top of that, what can I make with a 3D printer? I’ve seen people make stuff but it’s all stupid. I’m an engineer so I’m really into like PC modding but idk how a 3D printer can help me. I feel like this is something I’m supposed to be interested in or am being pressured into but I don’t see the use I’d have. What do I do?

I’m feeling really defeated snd helpless Right now. Any advice is appreciated

<div class="md">This is one of the hardest things I’ve ever had to write 

I’m getting an engineering degree snd this 3D printing stuff is literally harder than that

I have no clue where to start. There are so many facets to this stiff and I don’t know what I’m doing or what questions to ask or who to turn to. It’s really been a struggle for me 

How do I know what a good 3D printer is? This thing has good Amazon reviews but i don’t know 

<a href="https://www.amazon.com/dp/B07FFTHMMN/ref=cm_sw_r_cp_api_glt_fabc_NSR1CE53EN751NVJ4932?_encoding=UTF8&amp;psc=1">https://www.amazon.com/dp/B07FFTHMMN/ref=cm_sw_r_cp_api_glt_fabc_NSR1CE53EN751NVJ4932?_encoding=UTF8&amp;psc=1</a>

How do I use it?

How do I build it?

How do I calibrate it?

What software do I use to make 3D models?

How do I learn the software?

Is there open source Linux software?

How do I put the file on it to print?

And on top of that, what can I make with a 3D printer? I’ve seen people make stuff but it’s all stupid. I’m an engineer so I’m really into like PC modding but idk how a 3D printer can help me. I feel like this is something I’m supposed to be interested in or am being pressured into but I don’t see the use I’d have. What do I do?

I’m feeling really defeated snd helpless Right now. Any advice is appreciated
</div>

How to get into 3D printing?

Looking for a solid direct drive printer, don't really want more than 220mm^3. Considering artillery genius pro and sovol sv01, don't know any others

Welcome back to another purchase megathread!

For a link to last month's post, see [here](https://www.reddit.com/r/3Dprinting/comments/qkbhsb/purchase_advice_megathread_november/).

This thread is meant to conglomerate purchase advice for both newcomers and people looking for additional machines. Keeping this discussion to one thread means less searching should anyone have questions that may already have been answered here, as well as more visibility to inquiries in general, as comments made here will be visible for the entire month stuck to the top of the sub, and then linked to in the next month's thread.

If you are new to 3D printing, and are unsure of what to ask, try to include the following in your posts as a minimum:

* Your budget, set at a numeric amount. Saying "cheap," or "money is not a problem" is not an answer people can do much with. 3D printers can cost $100, they can cost $10,000,000, and anywhere in between. A rough idea of what you're looking for is essential to figuring out anything else.
* Your country of residence.
* If you are willing to build the printer from a kit, and what your level of experience is with electronic maintenance and construction if so.
* What you wish to do with the printer.
* Any extenuating circumstances that would restrict you from using machines that would otherwise fit your needs (limited space for the printer, enclosure requirement, must be purchased through educational intermediary, etc).

While this is by no means an exhaustive list of what can be included in your posts, these questions should help paint enough of a picture to get started. Don't be afraid to ask more questions, and never worry about asking too many. The people posting in this thread are here because they want to give advice, and any questions you have answered may be useful to others later on, when they read through this thread looking for answers of their own. Everyone here was new once, so chances are whoever is replying to you has a good idea of how you feel currently.

Additionally, a quick word on print quality: Most FDM/FFF (that is, filament based) printers are capable of approximately the same tolerances and print appearance, as the biggest limiting factor is in the nature of extruded plastic. **Asking if a machine has "good prints," or saying "I don't expect the best quality for $xxx" isn't actually relevant for the most part** with regards to these machines. Should you need additional detail and higher tolerances, you may want to explore SLA, DLP, and other photoresin options, as those *do* offer an increase in overall quality. If you are interested in resin machines, make sure you are aware of [how to use them safely](https://www.reddit.com/r/3DPrinting/wiki/resinprinting#wiki_safety). For these safety reasons we don't usually recommend a resin printer as someone's first printer.

As always, if you're a newcomer to this community, welcome. If you're a regular, welcome back.

<div class="md">Welcome back to another purchase megathread!

For a link to last month&#39;s post, see <a href="https://www.reddit.com/r/3Dprinting/comments/qkbhsb/purchase_advice_megathread_november/">here</a>.

This thread is meant to conglomerate purchase advice for both newcomers and people looking for additional machines. Keeping this discussion to one thread means less searching should anyone have questions that may already have been answered here, as well as more visibility to inquiries in general, as comments made here will be visible for the entire month stuck to the top of the sub, and then linked to in the next month&#39;s thread.

If you are new to 3D printing, and are unsure of what to ask, try to include the following in your posts as a minimum:

<ul>
<li>Your budget, set at a numeric amount. Saying &quot;cheap,&quot; or &quot;money is not a problem&quot; is not an answer people can do much with. 3D printers can cost $100, they can cost $10,000,000, and anywhere in between. A rough idea of what you&#39;re looking for is essential to figuring out anything else.</li>
<li>Your country of residence.</li>
<li>If you are willing to build the printer from a kit, and what your level of experience is with electronic maintenance and construction if so.</li>
<li>What you wish to do with the printer.</li>
<li>Any extenuating circumstances that would restrict you from using machines that would otherwise fit your needs (limited space for the printer, enclosure requirement, must be purchased through educational intermediary, etc).</li>
</ul>

While this is by no means an exhaustive list of what can be included in your posts, these questions should help paint enough of a picture to get started. Don&#39;t be afraid to ask more questions, and never worry about asking too many. The people posting in this thread are here because they want to give advice, and any questions you have answered may be useful to others later on, when they read through this thread looking for answers of their own. Everyone here was new once, so chances are whoever is replying to you has a good idea of how you feel currently.

Additionally, a quick word on print quality: Most FDM/FFF (that is, filament based) printers are capable of approximately the same tolerances and print appearance, as the biggest limiting factor is in the nature of extruded plastic. Asking if a machine has &quot;good prints,&quot; or saying &quot;I don&#39;t expect the best quality for $xxx&quot; isn&#39;t actually relevant for the most part with regards to these machines. Should you need additional detail and higher tolerances, you may want to explore SLA, DLP, and other photoresin options, as those do offer an increase in overall quality. If you are interested in resin machines, make sure you are aware of <a href="https://www.reddit.com/r/3DPrinting/wiki/resinprinting#wiki_safety">how to use them safely</a>. For these safety reasons we don&#39;t usually recommend a resin printer as someone&#39;s first printer.

As always, if you&#39;re a newcomer to this community, welcome. If you&#39;re a regular, welcome back.
</div>

Purchase Advice Megathread - December 2021

  Once assembled, continued to follow the instructions to level the bed and ensure the z-axis sensor was properly placed. Preheated the nozzle and bed, plugged in the SD card, the print started, and after 10 seconds of printing threw a ERR: MAXTEMP, so I did some research checked thermistor connections on board and at nozzle with no issues, bad board maybe? I don't know.  Edit: just after writing this review I did one more check, and heard the thermistor screw can sometimes be too tight, giving a MAXTEMP error, loosened the screw just the slightest and now it's printing just fine.  Check all screws and connections thoroughly if you buy before attempting your first print

  Update 4/6/22: The cooling fan is now rattling so loud I can't let the printer print overnight, I've had it shut down for a couple days, sent two emails to sovol that have gone without response, I've only had this printer for a week and was just asking for a replacement cooling fan. Maybe it's just been bad timing for them, but this experience has kind of stopped being enjoyable, I just want the printer to have working parts.

  Edit: just after writing this review I did one more check, and heard the thermistor screw can sometimes be too tight, giving a MAXTEMP error, loosened the screw just the slightest and now it's printing just fine.  Check all screws and connections thoroughly if you buy before attempting your first print.  Update 4/6/22: The cooling fan is now rattling so loud I can't let the printer print overnight, I've had it shut down for a couple days, sent two emails to sovol that have gone without response, I've only had this printer for a week and was just asking for a replacement cooling fan. Maybe it's just been bad timing for them, but this experience has kind of stopped being enjoyable, I just want the printer to have working parts

Missing parts, constant MAXTEMP error

 Let me put this off to the side a little bit and now that we've gone over the major features of the sb0 one. Let me tell you what I like most about it. I like that it's almost completely assembled out of the box. You both the gantry and the screen to the base hook up a few wires and you're good to go

 It'Ll keep you Cala kat, and it's done a great job with everything that I've thrown at it. So that's the s b01. 3D printer. There are links to pretty much everything down in the description, links to the models that I printed and showed you links to the soballe Facebook group and their Facebook page and a link to the printer on Amazon

The Sovol SV01 3D Printer Review: Is it any good?

  The sovol 1 has the thermal runaway problems and the broken nozzle problem.  Both printers have nice upgrades you can get for a better ease of use but all the plugs on the motherboard are hotglued in so you risk hurting the motherboard when trying to install and that doesn't seem use friendly  I've had to use the return service on both of them but the sovol 3 still has a wobbly nozzle issue and the sovol 1s nozzle still broke off in the hot end while replacing. I will not be buying from sovol again I wish you luck and hope you get on of there more cared for production models.

You will be betting on the product you get! (Bad)

 It is built with quality parts and the machine was done well. I didn't find any miss drills or missing or stripped screws. I did make a minor adjustment to the z alignment in relation to the base frame, a couple of mm. This put the two z lead screws more in sync

 I have a cad package now so I can design and print stuff I need to finish several projects. The quality of the pinter is very high. It is built with quality parts and the machine was done well. I didn't find any miss drills or missing or stripped screws

Fun larger size printer

Creality Ender 5 Plus vs Sovol SV01

Reviews by Topic

Reliability

QUICK QUESTION!

You might also like