Hiking Boots/Shoes Recommendations?

Hiking boot recommendations?

Any recommendations for women's hiking shoes?

[Request] Hiking/outdoorsy style shoes that can handle lots of walking on concrete

Cold and wet weather hiking boots recommendations?

I am in need of a new pair of trail/hiking boots.

Hiking Boots for heavy use during the summer

Good pair of hiking shoes?

[Request] waterproof hiking shoes

[request] - Good quality walking shoes.

Hello Redditors. I'm in search of a classy yet extremely durable pair of hiking boots to take backpacking around the world for 12+ months with.

Hiking boots recommendations

Men's three season "urban hiker" (like Merrell MOAB but longer lasting)

BIFL Hiking boots for women

Hiking boots with good traction and can stand up to abuse.

Looking for a good pair of shoes for my weird feet

Request - Hiking Sandals

Request: Hiking Boots

Comfortable and cushiony shoes for walking on pavement 10KM/couple hours a day (UK)

Hiking sandals that last?

[Request] Powerful dishwasher with sanitize function?

I want the best god damned dishwasher money can buy.

Looking for the best, easiest to operate, cheapest dishwasher - Recommendation?

[Request] Best countertop dishwasher for reasonable price?

Can anyone recommend a good dishwasher?

Countertop/Portable Dishwasher

[Request] Dishwasher &lt;$1k Australian with QOL features and low water use

Dishwasher for Second Home

My friend bought a house with this KichenAid dishwasher from 1974. He says it works better than any of the other ones he has owned. He just has to convince his wife not to replace it.

What's a good Panel ready dishwasher under $1k?

Best socket set on the market $100-$150

[Request] Socket wrenches

I need a recommendation for a tool set that should last a lifetime. [Request]

Looking for a Mechanics tool set.

23 years later; GM Goodwrench socket set.

A Starter/Lifetime Tool set

Basic screwdriver set needed

Mechanic Tools that are BIFL

Trying to fill a tool roll for my truck and would like input on BFL tools like wrenches, pliers, socket sets, etc.

BIFL: Mastercraft ratchet set with lifetime warranty. Got it at 14, im 31. Went thru more abuse than you think!

Looking to upgrade my home hand tools

Was told to post this here. Husky 270pc toolset from Home Depot for $99, normally $199. Lifetime warranty too

[Request] Ratchet/Wrench/Etc tool set for home/bicycle/general use

Thoughts on a Honda Accord V6 2007?

2010 Honda Accord worth the buy?

Thoughts on a 2008 Honda accord v6 coupe EX-L?

2014 honda accord ??

After an initial round of research it seems like Honda Accord Hybrid is the right answer, but I want to pressure test that with you guys

2014 Accord V6 Touring (any thoughts?)

Which car ?

me again. 2010 2dr honda accord, 122k miles for $5,800. just want a reliable first car, thoughts?

Want to buy an Accord, any suggestions?

2020/2021 Honda Accord LX - Tell Me About Your Likes/Dislikes

Compact - Midsize suv

best small/midsize suv?

Looking for a used (06-14) reliable compact/mid-size SUV

compact/mid size suv

Midsize SUV

Recommendations for midsized SUVs to look at

Compact to Mid-Size SUV

Small to mid-size suv suggestions?

Midsize vehicle for three kids

Mid-Size SUV

Just tried a Lotus Elise Cup 250, driving impressions !

Dan Neil reviews Lotus Emira: As Good As It Gets

Considering a Lotus Elise - USA

How affordable are Lotus Elises from the 2005-2012 model year?

Lotus Exige Sport Final Edition review: farewell, Exige

I wanna know everything you know about a 2005 Lotus Elise

My Lotus Evora Review

Lotus retail sales up 24% in best performance for a decade

2022 Lotus Emira Looks to Be One of the Brand's Best

PURCHASING A LOTUS — Need Tips + Advice.

Looking for a good rpg/action adventure with a good story and good characters

Deep long rpgs?

Looking for a story-focused RPG

Looking for a complex RPG

Fantasy games with an detailed and immersive world?

[WSIB] I am in search for a open world RPG that will keep me busy for hundreds of hours.

Open world game with huge map, lots of things to do, and great graphics

WSIB Feeling a bit of an rpg lull and want something exciting like old school BioWare with a engaging story that doesn’t take 100 hours to play.

WSIB: long, immersive games with high quality storytelling and writing

looking for an open-world rpg

[WSIB] A turn based strategy game that isn’t 4X

Turn-based strategy game

Turn-based strategy games

[WSIB] Small-scale, medieval, strategy game, featuring pikemen and cavalry

(WSIB) Turn-based ”wargaming” game

[WSIB] Turn Based Strategy games

WSIB if I want a strategy game for dummies

WSIB Strategic Rpg

[WSIB] Good offline strategy/(ish) games?

What are some good "smaller scale to control, but still feel large scale battle" tactical / strategy games?

Bullet Hell-Type Games: Atomicrops vs. I, Dracula: Genesis vs. Others?

WSIB if i want a completely story driven indie game but have already played undertale and oneshot (preferably similar to those 2)

Post apocalyptic enthusiast, Underrail or Atom RPG?

[SIB] Undermine or Atomicrops

WSIB if I like "Run into things, need to grow in power/special items to move further so I come back after unlocking said element" type of games.

Blsoodborne or Resident evil 2 ?

What should I buy? Animal Crossing: New Horizons or Doom: Eternal

[WSIB] Fast-paced top-down roguelikes?

[SIB] I Hate Running Backwards or Planetary Dustoff? Or something else?

SIB Nuclear Throne?

What can you recommend for minimizing pores?

I know you can’t get rid of pores but I’m wondering is there anyway to make them smaller? I use La Roche Posay products. They keep my acne mostly at bay but I feel like my pores are just so large. Part of it is genetic, but just wondering if there’s anything else I can do at home to help. Thanks!

OPEN PORES- WHAT TO DO? IS THERE ANY PRODUCT I CAN USE?

What skincare products have you used that helped with large pores?

What is the best thing to use to tighten pores on your face?

Can anyone tell me why my pores are so huge and what I can do to minimize them?

How to reduce pores.

Hey guys, how do I make my pores not look like this? Info in comments (deleted and reposted for an error in the title)

Pores reduction tips?

Advice for shrinking pores on and around nose?

[sun care] sunscreen that doesn’t irritate rosacea and perioral dermatitis

[Sun Care] Looking for sunscreen that doesn't irritate Rosacea

Sunscreen recommendations for rosacea

Looking for a sunscreen for my acne prone skin.

[Sun Care] looking for a sunscreen that works well for people with Eczema.

Desperate for a good sunscreen

Looking for a Daily Suncreen

I’ve tried them all and I still can’t find my holy grail for my dry rosacea skin. Any other recommendations?

Sunscreen, eczema and makeup, Help [Sun care]

[Sun Care] Help with not being able to use Sunscreen

How can i stop a really greasy face?

How to best defeat oily skin?

Is there any long-lasting solution for oily face?

Oily Face -&gt; Wash Face -&gt; More Oily

Extremely oily skin

Y’all know some sort of cream or product I can buy to make my face less greasy looking?

super oily face help needed

Oily Skin— please help!

Really oily skin

How to have less oily skin?

Adrian Krebs

Johannes Engler

Tavis Lochhead

amazon.com

Rise 3D Printing

Make and Remake

My Tech Fun

The Edge of Tech

Nathan Builds Robots

Beanie's Hobbies 3D Printing

Hoffman Engineering

 It's a cantilever design, which means it has one Z-axis and the X gantry rides straight off of that, like this. The extra mounting bracket down here makes sure that it can hold that gantry up and support plenty of weight. The standard Creality hotend makes it easy to work on and upgrade. It has belt tensioners on the X and Y, which makes it super easy to adjust your belt tension

 I think it might just take the cake. Let's find out why. The Ender 2 Pro is a breeze to set up with only four steps to assemble it. It is going to be great for beginners and if you've had a 3D printer before, there's only a total of seven bolts needed to assemble this, so it might be the easiest printer you've ever put together

 The Ender 2 Pro is a breeze to set up with only four steps to assemble it. It is going to be great for beginners and if you've had a 3D printer before, there's only a total of seven bolts needed to assemble this, so it might be the easiest printer you've ever put together. It's a cantilever design, which means it has one Z-axis and the X gantry rides straight off of that, like this. The extra mounting bracket down here makes sure that it can hold that gantry up and support plenty of weight

 All of this looks great on paper, but let's take a quick look at a couple prints I got off the Ender 2 Pro. This is the conical flask in vase mode by clock spring. It's printed in atomic filament and came out great. This mini gym by Wexter was also printed in that atomic indigo golden sparkle filament, and it came out virtually perfect

Could the Ender 2 Pro Be The  Best 3D Printer UNDER $200?

 The Ender 2 Pro could be the best new 3D printer for under $200, but what could possibly stop it from that title?

 Let's find out. My name is Jim and this is the Edge of Tech.

 So for the past three years the Ender 3 has been one of the best 3D printers you could get for under $200.

 But Creality recently released the Ender 2 Pro for

 $169. I think it might just take the cake. Let's find out why.

 The Ender 2 Pro is a breeze to set up with only four steps to assemble it.

 It is going to be great for beginners and if you've had a 3D printer before,

 there's only a total of seven bolts needed to assemble this, so it might be the easiest printer you've ever put together.

 It's a cantilever design, which means it has one Z-axis and the X gantry rides straight off of that,

 like this. The extra mounting bracket down here

 makes sure that it can hold that gantry up and support plenty of weight. The standard Creality hotend makes it easy to work on and

 upgrade. It has belt tensioners on the X and Y, which makes it super easy to adjust your belt tension.

 The build surface is magnetic and it allows you to remove prints by flexing the plate and then it just

 slaps back on for your next print. It has a cool hidden storage in the side there,

 so you can hide all your tools right there. On this side of the case on the bottom hides a

 32-bit board with silent drivers. It also has a case fan to exhaust the air and

 150 watts of power in a power supply that hides in this side, all

 conveniently stored right under the printer for that small footprint.

 One of the coolest things about the Ender 2 Pro is the

 portability. This handle at the top makes it super easy just to pick the printer up and walk away and take it wherever you're

 going to go. But if you're going to do that, don't forget to take the spool off the spool holder and fold that in to make this

 thing super compact. It has a great interface,

 it's very responsive, and if you want you can pop the screen off quick and easy for travel.

 All of this looks great on paper, but let's take a quick look at a couple prints I got off the Ender 2 Pro.

 This is the conical flask in vase mode by clock spring. It's printed in atomic filament and came out great.

 This mini gym by Wexter was also printed in that atomic

 indigo golden sparkle filament, and it came out virtually perfect.

 This might be the best mini gym I've seen off of a stock 3D printer yet.

 If you're getting value out of this video, please smash that like button.

 It really helps push the video out to more people just like you.

 I really appreciate it. Now back to it. Now let's talk about the elephant in the room, the build area. At

 But is that a deal-breaker? Does that stop the Ender 2 Pro from taking the reins? To put this in perspective,

 this is the Ender 2 Pro build surface on an Ender 3 build surface. You can see it's definitely smaller.

 Actually, I would say most of the time I don't print parts that are bigger than this on a normal basis anyway,

 It comes as a kit and it'll take you about an hour to build using this video right here.

 $169, $20 cheaper, on Creality's website and

 from the time you get it out of the box till your first print will be about 15 minutes.

 Now the Ender 3 is still a very good printer,

 but with all the features that come on the Ender 2 Pro and the lower price of the Ender 2 Pro,

 I think it takes some serious consideration that the Ender 2 Pro takes the top spot as the best 3D printer under

 $200 that you can get today. But Jim, who is the Ender 2 Pro for? Well, I would say this is a great

 first printer for someone just trying to get into the hobby.

 It's cheap and prints great right out of the box. Or if you already have another 3D printer,

 this could be the perfect add-on. The machine to print the little parts while your other printer is printing the big parts. At only

 $169 it will be the perfect second printer to add to your arsenal. And don't forget the versatility to take this anywhere

 I think the Ender 2 has been great to me so far, and it's quickly becoming one of my favorite 3D printers.

 Let me know in the comments below what you think of the Ender 2 Pro, and if you had a printer like this,

 Still not sure about the Ender 2 Pro? Well, check this video out right here where I take a look at what could be

 Creality's best Ender 3 they've ever built.

 It's meant to be picked up and moved around. They've combined it with the handle When not in use you can take unload your filament and the arm will fold in for better storage It has a lot of good options to it But there were a few things that I felt fell short on this printer too, and I want to point those out Especially for the price point looking at the price point 170 and Ender 3 Pro is about 190 So roughly 200 so not much more for a lot more build area and a lot more machine This machine You have about half the build plate Which is great, but there were some things I felt Crowdy probably could have done better with this one that now I'm gonna have to upgrade and I want to point those out First part that I want to point out. Everything looks kind of good on that end And we'll get this guy screwed back in And I do love that they gave this kind of some swing that that's kind of a nice thing because I can swing it and put the Condensed the printer for better storage So that is a nice feature So wiring all looks good So now we got to wire in this guy so we'll get the control panel We'll get him plugged in and We'll pull that tape back We'll get this guy in his slots We'll slot him home All right, so that's looking good Got it good and connected And now at this point it's adjustment so We're done with the instruction book. We're actually going to get this guy powered on We're going to power them on for a little bit make sure everything looks right then I am going to set this guy aside so Um, the reason why i'm going to set it aside is one i'm going to plan on doing a hey We used it video But two I I'm not going to use this I see a tangled horrible mess right here and I don't have a normal spool up here because my expectation From creality was the half spool that we would normally get with an ender three or cr-10 and we didn't get that so I'm going to be uh Have to wait to actually power her on And I don't see a switch for voltage A lot of times I would expect to see a 115 or a 230 volt switch I don't see that on that this machine

 I had a lot of fun with it, especially doing small parts and things like that That's why this guy has been kept around in my shop for so long. It's when I have print jobs with itty-bitty parts and and lots of them I don't have to tie up a big printer to print a small piece That's where a small build plate comes in place but also if you're doing small stuff like Just small figurine vases stuff like that and you don't have a lot of room and you need something that's portable and easy to put Away the Ender 2 Pro is definitely a fit for you And especially when it comes into the cost of looking at like a Prusa or something like that This guy's price point is right around 170 bucks, which is not a bad price point It's well contained. It's meant to be picked up and moved around. They've combined it with the handle When not in use you can take unload your filament and the arm will fold in for better storage It has a lot of good options to it But there were a few things that I felt fell short on this printer too, and I want to point those out Especially for the price point looking at the price point 170 and Ender 3 Pro is about 190 So roughly 200 so not much more for a lot more build area and a lot more machine This machine You have about half the build plate Which is great, but there were some things I felt Crowdy probably could have done better with this one that now I'm gonna have to upgrade and I want to point those out First part that I want to point out

 Are you looking for a small FDM printer looking around looking at Prusa and all that well today I'm gonna talk about Creality's latest release the Ender 2 Pro. So join me inside Hey guys welcome to today's video as I said, we are looking at Creality's Ender 2 Pro this guy is a smaller printer than the Ender 3 and And it's a remake of an older one So the Ender 2 has been out for a long time a matter of fact It's hard to even find the parts for it anymore because it's just been it's not made anymore And that's this guy right here. So this is my Ender 2 heavily modded I actually came by this one secondhand, but it's a great little fantastic printer a small build plate Especially if you're wanting to do small stuff. Well Creality turned around and this year released the Pro version All of a sudden we're back to it to the small printer now we release this in competition to the Ender 3 which is a bit bigger and not as mobile as This printer it can be so one thing I'm going to talk about is if you're curious about the assembly check out my stream Because we did it live, but also I want to talk about pros and cons of this printer What I felt was great about it what I felt was wrong about it So this is actually the review now that I've used it for a week or so and kind of done some prints with it So I want to take a look at it and give you guys some true information that I think is relevant when you're considering your purchase If you guys are interested in this now one of the things to keep in mind that build platform

Creality Ender 2 Pro vs Wanhao Duplicator 7

QUICK QUESTION!

You might also like