Buffalo Classic USB Gamepad vs Logitech G920 Driving Force

If you happen to run into issues with those settings, look at Chet M.'s review "Great Controller for RetroPie! Config settings in review". Read the install instructions posted there. The particular configuration that is posted in that review seems to work perfectly, and I was able to verify that all buttons (including L/R and X/Y) work great in the SNES emulator that I use

The paddle shifters and E-brake preset keybind are not up to par as its hard to press the "B" button to E-brake while the wheel is turning. The compatible games themselves (forza/gta/etc.) seem to not want to respond correctly and is too hard to drive, i myself had the easiest time with it amongst the users and was still finding it impossible to enjoy. You're aspirations for this item will be ultimately let down

The controller is very responsive. When I mess up, it never seems like the controllers fault. So now that I made it through all that, I am fully satisfied with this game pad. The end result is a 5 star experience while playing games, even though the product as a whole is a 5 star product for how difficult it was to setup

It seems like all the compatibility wasn't there yet, as a matter of fact, Logitech just reached out to me today that they are working on a new driver...

Problem: I received a refund because my controller was defective. The D-pad is implemented as an analog input, so the USB driver reports a range of values. The problem is my D-pad randomly registers input when I'm not even touching it. I went to html5gamepad

Every time I touch the wheel even a little during this process, it immediately stops, becomes unresponsive, and I have to go unplug and plug it back in. 3. This one’s the worst. The brake pedal

This one does the trick. The dpad is "tight" and snappy. Everything else is icing on the cake. I bought this for my brother's bday after he put together his Raspberry Pie-we had been using my Xbox360 controller, but the Buffalo far exceeds that

It really draws well with the wheel now as I set the start, I turned my force feedback down because at 100 %, which people for some reason recommend i...

The price was pretty reasonable and almost everyone has been saying that it is a great controller so I ordered one. I received it a few days ago and the box it came in was very nice but was covered in Chinese. However there was some English but either way it isn't needed to read it and I had no problems getting my 4 year old laptop that’s running Windows 10 to recognize the controller. To test it I played a few games that require face button presses like F-Zero, Star Fox and Super Street Fighter 2

But in April I grabbed an Oculus Rift, and of course one of the things I ultimately had to try was a racing game, and it really turned it into a different experience. Enough that I decided I needed to try a wheel and pedals to control it, not just the Xbox controller. So I did some digging, and this was the one that seemed to hit the right price point and was supported in the Project Cars game I have on the Oculus system

s I can verify this works on Win 7 using ZSNES v. 151. I played a glorious round of super mario kart just now as my test. If you're using this emulator, be sure you 'set' the keys in the input section (click on button on screen, and it will then ask for input at which point you press the key on the gamepad)

Well, at that, while i knew the tray would move, i was always pretty sure that the wheel wasn't going to after that plug in the usb into your console ...

Then you go to left arrow, right arrow, down arrow, x, y, a, b, etc and repeat for each. Then it worked.

Overall, the G920 and G29 are excellent and I actually plan to buy the newer G923 once they go on sale for the holidays.

I took it apart to see what the problem was, and I realized those buttons had extra plastic left from the injection molding process. The plastic made the bottom of the buttons uneven. After scraping off the extra plastic, the buttons all felt much better. Since I already had it open, I hot-glued some small washers inside the casing before closing it up

I replaced this item and returned this item which is working perfectly Where is my money for my return made in September