Hiking Boots/Shoes Recommendations?

Hiking boot recommendations?

Any recommendations for women's hiking shoes?

[Request] Hiking/outdoorsy style shoes that can handle lots of walking on concrete

Cold and wet weather hiking boots recommendations?

I am in need of a new pair of trail/hiking boots.

Hiking Boots for heavy use during the summer

Good pair of hiking shoes?

[Request] waterproof hiking shoes

[request] - Good quality walking shoes.

Hello Redditors. I'm in search of a classy yet extremely durable pair of hiking boots to take backpacking around the world for 12+ months with.

Hiking boots recommendations

Men's three season "urban hiker" (like Merrell MOAB but longer lasting)

BIFL Hiking boots for women

Hiking boots with good traction and can stand up to abuse.

Looking for a good pair of shoes for my weird feet

Request - Hiking Sandals

Request: Hiking Boots

Comfortable and cushiony shoes for walking on pavement 10KM/couple hours a day (UK)

Hiking sandals that last?

[Request] Powerful dishwasher with sanitize function?

I want the best god damned dishwasher money can buy.

Looking for the best, easiest to operate, cheapest dishwasher - Recommendation?

[Request] Best countertop dishwasher for reasonable price?

Can anyone recommend a good dishwasher?

Countertop/Portable Dishwasher

[Request] Dishwasher &lt;$1k Australian with QOL features and low water use

Dishwasher for Second Home

My friend bought a house with this KichenAid dishwasher from 1974. He says it works better than any of the other ones he has owned. He just has to convince his wife not to replace it.

What's a good Panel ready dishwasher under $1k?

Best socket set on the market $100-$150

[Request] Socket wrenches

I need a recommendation for a tool set that should last a lifetime. [Request]

Looking for a Mechanics tool set.

23 years later; GM Goodwrench socket set.

A Starter/Lifetime Tool set

Basic screwdriver set needed

Mechanic Tools that are BIFL

Trying to fill a tool roll for my truck and would like input on BFL tools like wrenches, pliers, socket sets, etc.

BIFL: Mastercraft ratchet set with lifetime warranty. Got it at 14, im 31. Went thru more abuse than you think!

Looking to upgrade my home hand tools

Was told to post this here. Husky 270pc toolset from Home Depot for $99, normally $199. Lifetime warranty too

[Request] Ratchet/Wrench/Etc tool set for home/bicycle/general use

Thoughts on a Honda Accord V6 2007?

2010 Honda Accord worth the buy?

Thoughts on a 2008 Honda accord v6 coupe EX-L?

2014 honda accord ??

After an initial round of research it seems like Honda Accord Hybrid is the right answer, but I want to pressure test that with you guys

2014 Accord V6 Touring (any thoughts?)

Which car ?

me again. 2010 2dr honda accord, 122k miles for $5,800. just want a reliable first car, thoughts?

Want to buy an Accord, any suggestions?

2020/2021 Honda Accord LX - Tell Me About Your Likes/Dislikes

Compact - Midsize suv

best small/midsize suv?

Looking for a used (06-14) reliable compact/mid-size SUV

compact/mid size suv

Midsize SUV

Recommendations for midsized SUVs to look at

Compact to Mid-Size SUV

Small to mid-size suv suggestions?

Midsize vehicle for three kids

Mid-Size SUV

Just tried a Lotus Elise Cup 250, driving impressions !

Dan Neil reviews Lotus Emira: As Good As It Gets

Considering a Lotus Elise - USA

How affordable are Lotus Elises from the 2005-2012 model year?

Lotus Exige Sport Final Edition review: farewell, Exige

I wanna know everything you know about a 2005 Lotus Elise

My Lotus Evora Review

Lotus retail sales up 24% in best performance for a decade

2022 Lotus Emira Looks to Be One of the Brand's Best

PURCHASING A LOTUS — Need Tips + Advice.

Looking for a good rpg/action adventure with a good story and good characters

Deep long rpgs?

Looking for a story-focused RPG

Looking for a complex RPG

Fantasy games with an detailed and immersive world?

[WSIB] I am in search for a open world RPG that will keep me busy for hundreds of hours.

Open world game with huge map, lots of things to do, and great graphics

WSIB Feeling a bit of an rpg lull and want something exciting like old school BioWare with a engaging story that doesn’t take 100 hours to play.

WSIB: long, immersive games with high quality storytelling and writing

looking for an open-world rpg

[WSIB] A turn based strategy game that isn’t 4X

Turn-based strategy game

Turn-based strategy games

[WSIB] Small-scale, medieval, strategy game, featuring pikemen and cavalry

(WSIB) Turn-based ”wargaming” game

[WSIB] Turn Based Strategy games

WSIB if I want a strategy game for dummies

WSIB Strategic Rpg

[WSIB] Good offline strategy/(ish) games?

What are some good "smaller scale to control, but still feel large scale battle" tactical / strategy games?

Bullet Hell-Type Games: Atomicrops vs. I, Dracula: Genesis vs. Others?

WSIB if i want a completely story driven indie game but have already played undertale and oneshot (preferably similar to those 2)

Post apocalyptic enthusiast, Underrail or Atom RPG?

[SIB] Undermine or Atomicrops

WSIB if I like "Run into things, need to grow in power/special items to move further so I come back after unlocking said element" type of games.

Blsoodborne or Resident evil 2 ?

What should I buy? Animal Crossing: New Horizons or Doom: Eternal

[WSIB] Fast-paced top-down roguelikes?

[SIB] I Hate Running Backwards or Planetary Dustoff? Or something else?

SIB Nuclear Throne?

What can you recommend for minimizing pores?

I know you can’t get rid of pores but I’m wondering is there anyway to make them smaller? I use La Roche Posay products. They keep my acne mostly at bay but I feel like my pores are just so large. Part of it is genetic, but just wondering if there’s anything else I can do at home to help. Thanks!

OPEN PORES- WHAT TO DO? IS THERE ANY PRODUCT I CAN USE?

What skincare products have you used that helped with large pores?

What is the best thing to use to tighten pores on your face?

Can anyone tell me why my pores are so huge and what I can do to minimize them?

How to reduce pores.

Hey guys, how do I make my pores not look like this? Info in comments (deleted and reposted for an error in the title)

Pores reduction tips?

Advice for shrinking pores on and around nose?

[sun care] sunscreen that doesn’t irritate rosacea and perioral dermatitis

[Sun Care] Looking for sunscreen that doesn't irritate Rosacea

Sunscreen recommendations for rosacea

Looking for a sunscreen for my acne prone skin.

[Sun Care] looking for a sunscreen that works well for people with Eczema.

Desperate for a good sunscreen

Looking for a Daily Suncreen

I’ve tried them all and I still can’t find my holy grail for my dry rosacea skin. Any other recommendations?

Sunscreen, eczema and makeup, Help [Sun care]

[Sun Care] Help with not being able to use Sunscreen

How can i stop a really greasy face?

How to best defeat oily skin?

Is there any long-lasting solution for oily face?

Oily Face -&gt; Wash Face -&gt; More Oily

Extremely oily skin

Y’all know some sort of cream or product I can buy to make my face less greasy looking?

super oily face help needed

Oily Skin— please help!

Really oily skin

How to have less oily skin?

Adrian Krebs

Johannes Engler

Tavis Lochhead

smkw.com

amazon.com

bladereviews.com

Overall, I really like the style, weight, and blade; I really want to keep it, but I will not if I can't manage to get that screw out. If it had come with a usable tool and was assembled with better care I would have paid $100 for it and given 4 stars, though, as I received it,

 Many of the screws are torqued tighter than it can grip the screws and also won't come out. I'd expect to be able to disassemble a knife of this price for general maintenance / cleaning and repairs, but I cannot with the tool that came with it. I'm hoping a proper torx tool will still get it apart, but I'm not sure I'll ever get out the one that's stripped, not to mention having to find a replacement screw (may return it in that case).

 Thankfully I was able to get to the important screw holding the blade and loosen the tension a bit. That and a couple dabs of oil and it flips open well for its weight, but didn't out of the box. No play on blade when open, but the liner lock is sticky to release (oil didn't help, its a pretty thin friction surface). The flipper also has a very sharp edge where you pull it which catches your hand in a pocket, and has made my index finger a bit raw just from flipping it a few dozen times for testing and tuning it

 From there you can gently pull up the face on the non clip side, push the stop pin out of the way, and pivot the plate like opening scissors around the standoff to free the blade (pay close attention to the bearings so you don't lose or flip them upside down). If you are going to grind the flipper, gently remove the top bearing from the blade first so you don't ruin or lose it. From there you can clean up the blade, oil the joint, reassemble and enjoy. During re-assembly, play with the tightness of the pivot screw

 To get the blade out you need to pull the blade pivot screw on the not clip side. Make sure you keep the knife oriented clip side down as the ball bearings are facing up in that position, I'm not sure if they would fall out but I wouldn't recommend testing that theory based on how they looked (I'd do this away from carpets or messy areas in case). From there you can gently pull up the face on the non clip side, push the stop pin out of the way, and pivot the plate like opening scissors around the standoff to free the blade (pay close attention to the bearings so you don't lose or flip them upside down). If you are going to grind the flipper, gently remove the top bearing from the blade first so you don't ruin or lose it

Good design ruined by poor assembly

 In addition, for only $89 you can get a gorgeous Sandalwood Handle CIVIVI Riffle with a Damascus Blade 3.5-Inch Drop Point Blade, so I consider this knife overpriced. If your looking for a similar design and very lightweight knife, they I would highly recommend the Samior G1035 Small Slim Folding Pocket Flipper Knife @ $25 & only 1.3oz

25" Black Stonewashed 9CR18MOV Blade - $39.95 Boker Mini Strike Automatic Knife Black Aluminum 2.6" Stonewash D2 - $42.95 Boker Burnley Kihon Drop Point Automatic Knife 3

5-Inch Drop Point Blade - $89.25 Spyderco Ikuchi Flipper 3.26" CPM S30V Stainless Steel Blade and Carbon Fiber G-10 Laminate Handle - PlainEdge - C242CFP - $140

26" CPM S30V Stainless Steel Blade and Carbon Fiber G-10 Laminate Handle - PlainEdge - C242CFP - $140

Nice Knife, But Overpriced and I Had Some Flipping Problems

 A handle scale also cracked (it appears to be to thin and therefore weak as well), so I sent it to Boker USA under warranty. I don't have high hopes regarding repair or replacement, and I suspect the fact the liner is titanium causes inherent problems as it's just too soft to do a proper job. It's a joy to carry due to its light weight, and the blade deploys smooth and fast, but given its fragility it's an insane amount of money to spend on a Chinese made knife. Based on my experience I will avoid Boker knives and would suggest others do the same (at the very least with this model in their line of products)

 I've never owned a knife that failed so quickly with such light use, and I'm surprised at the popularity and continued production of the Urban Trapper. The CEO knife is built like a tank in comparison, and is less than half the price for the base model. Not as nice a steel but holds up under much harder use.

 I use knives a lot, but they're mostly handling every day chores and light tasks. This thing developed vertical blade play almost instantly with limited and light use, and it's not correctable (or at least it's not easily correctable) due to its design. The lock bar has so little room to work with any kind of slight tolerance discrepancy = a poor lockup. That can't easily be remedied and sometimes isn't possible under any circumstances

Easily broken...super light duty only.

 There is nothing I would change about the knife now that the tension in the clip is resolved.

 I can tell now that this knife is durable, wicked sharp and built for the long haul. Would it be the knife I would choose if I knew I'd be using it all day long in a warehouse type setting? No. But that's not what this knife is about. This knife is all about being absurdly effective, durable and looking great doing it

 But that's not what this knife is about. This knife is all about being absurdly effective, durable and looking great doing it. The wood panels of the grip are pleasing to the eye and touch. The steel is a common one found in high end knives, and for good reason

Top quality, excellent and classy EDC knife

Very lightweight but just felt cheap in the hand compared to other knives at this price point. I returned it.

Opens easily.

I prefer this knife over my friend's $300 Benchmade by a long shot. The action is smooth, but satisfyingly heavy. No accidental blade deployments here. The blade is perfectly centered and while there is some degree of side to side play when closed, it's quite minimal, and completely non-existent when opened

The blade itself is beautiful 3.5" VG-10 drop point with what appears to be a hand satin finish. The spine bears your knife's unique serial number. The blade picks up fingerprints relatively quickly, but it's not hard to wipe them off with a soft cloth and regain a satisfying shine

 Blade was shaving sharp out of the box and has been slow to dull. Regular stropping has kept the edge in top shape. I have yet to put it to a stone, which is a rarity for me. Usually they see the stone within a week

As for the handle, I went with the Cocobolo, because I was looking for more of a gentleman's knife for my edc. The titanium frames are solid and sport that classic titanium gray color that I absolutely love (YMMV). The Cocobolo scales are a beautiful affair with a fantastic grain that boasts many shades of red and brown, with a smooth yet textured surface.

Satisfyingly Solid and Stylish Gentleman's Folder

walmart

yotpo

expert-review

Boker Plus Kalashnikov AK-74 Automatic Knife Review | BladeReviews.com

White Glove Reviews

 All in for the link in description and I'll also include a link in the description talking about the Elm axe, blade, steel and I'll include a link that will show you legality for automatic knives in the various states. Now, as with anything else, dealing with automatic knives automatic knives are really weird. Some of the laws relating to automatic knives are actually worse than gun laws, and you want to be very, very careful carrying these like in this one and out the front knife. I think might be even I think people might look at this even more

 I can't really see this as an everyday carry knife. It is a meat knife and it is a lot of fun to play with I mean you can just sit around and you know extend and retract it over and over again, and the blade is really really sharp, and you know you just I mean it's super Sharp and the blade itself is made of l max or L max steel, and this is supposed to be a really good knife. Steel and it's supposed to hold an edge very well and I'll include a link down in the description talking about this particular kind of knife. Steel

 Steel and it's supposed to hold an edge very well and I'll include a link down in the description talking about this particular kind of knife. Steel. Now one thing about the micro Tech's is they kind of? If you do a lot of knife shopping, they kind of come and go randomly availability wise, like for example, shortly after I picked up this one, it was sold out and the supply is sort of come and go now. This is a really neat knife and I think it's completely safe if you wanted to carry it in your pocket, because I mean you're not going to accidentally brush against this enough to trigger it in your pocket

Microtech Ultratech S/E OTF Automatic Knife EDC  Review

Boker Plus Strike Drop Point vs Microtech Ultratech S/E OTF Automatic

Reviews by Topic

Blade

QUICK QUESTION!

You might also like