Hiking Boots/Shoes Recommendations?

Hiking boot recommendations?

Any recommendations for women's hiking shoes?

[Request] Hiking/outdoorsy style shoes that can handle lots of walking on concrete

Cold and wet weather hiking boots recommendations?

I am in need of a new pair of trail/hiking boots.

Hiking Boots for heavy use during the summer

Good pair of hiking shoes?

[Request] waterproof hiking shoes

[request] - Good quality walking shoes.

Hello Redditors. I'm in search of a classy yet extremely durable pair of hiking boots to take backpacking around the world for 12+ months with.

Hiking boots recommendations

Men's three season "urban hiker" (like Merrell MOAB but longer lasting)

BIFL Hiking boots for women

Hiking boots with good traction and can stand up to abuse.

Looking for a good pair of shoes for my weird feet

Request - Hiking Sandals

Request: Hiking Boots

Comfortable and cushiony shoes for walking on pavement 10KM/couple hours a day (UK)

Hiking sandals that last?

[Request] Powerful dishwasher with sanitize function?

I want the best god damned dishwasher money can buy.

Looking for the best, easiest to operate, cheapest dishwasher - Recommendation?

[Request] Best countertop dishwasher for reasonable price?

Can anyone recommend a good dishwasher?

Countertop/Portable Dishwasher

[Request] Dishwasher &lt;$1k Australian with QOL features and low water use

Dishwasher for Second Home

My friend bought a house with this KichenAid dishwasher from 1974. He says it works better than any of the other ones he has owned. He just has to convince his wife not to replace it.

What's a good Panel ready dishwasher under $1k?

Best socket set on the market $100-$150

[Request] Socket wrenches

I need a recommendation for a tool set that should last a lifetime. [Request]

Looking for a Mechanics tool set.

23 years later; GM Goodwrench socket set.

A Starter/Lifetime Tool set

Basic screwdriver set needed

Mechanic Tools that are BIFL

Trying to fill a tool roll for my truck and would like input on BFL tools like wrenches, pliers, socket sets, etc.

BIFL: Mastercraft ratchet set with lifetime warranty. Got it at 14, im 31. Went thru more abuse than you think!

Looking to upgrade my home hand tools

Was told to post this here. Husky 270pc toolset from Home Depot for $99, normally $199. Lifetime warranty too

[Request] Ratchet/Wrench/Etc tool set for home/bicycle/general use

Thoughts on a Honda Accord V6 2007?

2010 Honda Accord worth the buy?

Thoughts on a 2008 Honda accord v6 coupe EX-L?

2014 honda accord ??

After an initial round of research it seems like Honda Accord Hybrid is the right answer, but I want to pressure test that with you guys

2014 Accord V6 Touring (any thoughts?)

Which car ?

me again. 2010 2dr honda accord, 122k miles for $5,800. just want a reliable first car, thoughts?

Want to buy an Accord, any suggestions?

2020/2021 Honda Accord LX - Tell Me About Your Likes/Dislikes

Compact - Midsize suv

best small/midsize suv?

Looking for a used (06-14) reliable compact/mid-size SUV

compact/mid size suv

Midsize SUV

Recommendations for midsized SUVs to look at

Compact to Mid-Size SUV

Small to mid-size suv suggestions?

Midsize vehicle for three kids

Mid-Size SUV

Just tried a Lotus Elise Cup 250, driving impressions !

Dan Neil reviews Lotus Emira: As Good As It Gets

Considering a Lotus Elise - USA

How affordable are Lotus Elises from the 2005-2012 model year?

Lotus Exige Sport Final Edition review: farewell, Exige

I wanna know everything you know about a 2005 Lotus Elise

My Lotus Evora Review

Lotus retail sales up 24% in best performance for a decade

2022 Lotus Emira Looks to Be One of the Brand's Best

PURCHASING A LOTUS — Need Tips + Advice.

Looking for a good rpg/action adventure with a good story and good characters

Deep long rpgs?

Looking for a story-focused RPG

Looking for a complex RPG

Fantasy games with an detailed and immersive world?

[WSIB] I am in search for a open world RPG that will keep me busy for hundreds of hours.

Open world game with huge map, lots of things to do, and great graphics

WSIB Feeling a bit of an rpg lull and want something exciting like old school BioWare with a engaging story that doesn’t take 100 hours to play.

WSIB: long, immersive games with high quality storytelling and writing

looking for an open-world rpg

[WSIB] A turn based strategy game that isn’t 4X

Turn-based strategy game

Turn-based strategy games

[WSIB] Small-scale, medieval, strategy game, featuring pikemen and cavalry

(WSIB) Turn-based ”wargaming” game

[WSIB] Turn Based Strategy games

WSIB if I want a strategy game for dummies

WSIB Strategic Rpg

[WSIB] Good offline strategy/(ish) games?

What are some good "smaller scale to control, but still feel large scale battle" tactical / strategy games?

Bullet Hell-Type Games: Atomicrops vs. I, Dracula: Genesis vs. Others?

WSIB if i want a completely story driven indie game but have already played undertale and oneshot (preferably similar to those 2)

Post apocalyptic enthusiast, Underrail or Atom RPG?

[SIB] Undermine or Atomicrops

WSIB if I like "Run into things, need to grow in power/special items to move further so I come back after unlocking said element" type of games.

Blsoodborne or Resident evil 2 ?

What should I buy? Animal Crossing: New Horizons or Doom: Eternal

[WSIB] Fast-paced top-down roguelikes?

[SIB] I Hate Running Backwards or Planetary Dustoff? Or something else?

SIB Nuclear Throne?

What can you recommend for minimizing pores?

I know you can’t get rid of pores but I’m wondering is there anyway to make them smaller? I use La Roche Posay products. They keep my acne mostly at bay but I feel like my pores are just so large. Part of it is genetic, but just wondering if there’s anything else I can do at home to help. Thanks!

OPEN PORES- WHAT TO DO? IS THERE ANY PRODUCT I CAN USE?

What skincare products have you used that helped with large pores?

What is the best thing to use to tighten pores on your face?

Can anyone tell me why my pores are so huge and what I can do to minimize them?

How to reduce pores.

Hey guys, how do I make my pores not look like this? Info in comments (deleted and reposted for an error in the title)

Pores reduction tips?

Advice for shrinking pores on and around nose?

[sun care] sunscreen that doesn’t irritate rosacea and perioral dermatitis

[Sun Care] Looking for sunscreen that doesn't irritate Rosacea

Sunscreen recommendations for rosacea

Looking for a sunscreen for my acne prone skin.

[Sun Care] looking for a sunscreen that works well for people with Eczema.

Desperate for a good sunscreen

Looking for a Daily Suncreen

I’ve tried them all and I still can’t find my holy grail for my dry rosacea skin. Any other recommendations?

Sunscreen, eczema and makeup, Help [Sun care]

[Sun Care] Help with not being able to use Sunscreen

How can i stop a really greasy face?

How to best defeat oily skin?

Is there any long-lasting solution for oily face?

Oily Face -&gt; Wash Face -&gt; More Oily

Extremely oily skin

Y’all know some sort of cream or product I can buy to make my face less greasy looking?

super oily face help needed

Oily Skin— please help!

Really oily skin

How to have less oily skin?

Adrian Krebs

Johannes Engler

Tavis Lochhead

BladeOps

Calvin Van Arragon

cutlerylover

 This is a fantastic small kind of carry style, in my opinion, balisong it has the jewel titanium. Liners g10 milled handle scales and the awesome smaller blade bench made 32 made in the US by bench made is going to be discontinued. So if you're interested grab them, while you can, if not say farewell glad, you got to see it here and there's your quick knife update, comment down below check it out. Bladeops 

 So if you're interested grab them, while you can, if not say farewell glad, you got to see it here and there's your quick knife update, comment down below check it out. Bladeops 

 So here is the box. The benchmade 32 Morpho blue class is no longer going to be produced by benchmade, so whatever we have left in stock is what we have left. This is a fantastic small kind of carry style, in my opinion, balisong it has the jewel titanium. Liners g10 milled handle scales and the awesome smaller blade bench made 32 made in the US by bench made is going to be discontinued

Hey bladeops, honestly, it's actually kind of a sad day at the knife shop. We got word that benchmade is discontinuing the 32 balisong. So here is the box. The benchmade 32 Morpho blue class is no longer going to be produced by benchmade, so whatever we have left in stock is what we have left

Benchmade 32 Discontinued What????

 This bow alone does not use Tang pins; instead, it has two pins in the handle pin on this side. Okay and a pin on this side. You see here these two pins and basically the butt end of the Tang. You see how it's that design there the pins kind of line up in between on either side of this point, two things which I like about this

 So you have see if I can explain this. I kind of went over this in the other video to the technologies that they use for this. One benchmade calls next generation kick or pin technology and basically the the actual liner itself, the titanium liner. It'S I guess, um, it's split in the lower district

 I think that's pretty cool looking, but also in the closed position. You have somewhat of a point here, which is a good, improvised impact weapon. Okay, you can use this if you have some now basic pressure, points and stuff like that, you can keep your knife closed and for self-defense, you know, use this. You know a non-lethal manner

 I had a three inch blade. I was awesome, I carried it forever. I end up selling it and now I miss it because they're very hard to find, but this was a perfect replacement for me. I really liked the upgrade in materials and design said that that's it that's the my review of the 32

Balisong Review : Benchmade model 32 Morpho

I believe it's [ __ ] mondo Mungo so this

 Okay. So if I do happen to do any flipping footage, all I'll just put it in here. Well, I read some of the specs. The specs overall is just blade length here is three point: two five inches blade thickness is zero point

 They look very very nice they're, not super smooth those liners on the edge. You can see a little bit of machining on there, but as for the anodizing, it stays there really really. Well, they do a good job, anodizing the liners and the pocket clip on both my 51 and my 32. I'Ve had relatively nowhere in the anodizing, so that's good! You can see here the skeletonized g10 handles they take off a tiny bit of weight, not much

 This is not a stainless steel, but for being a for not being a stainless steel, it is pretty corrosion resistant. So from what I've heard, it's pretty well just like one step away from being stainless, but I do prefer a stainless for ballast songs, a little bit less upkeep, but for the d2 you're also not going to have to sharpen it as much. It'S got a harder steel. Obviously, what you're going to hold the edge a little bit longer, but it's also going to be a little bit harder to sharpen, as well as you're gon na have to make sure it's oiled, just maintain it, so it doesn't rust

 Obviously, the way they temper it it can vary a little bit blade style crown modified spear point weight is two point: seven ounces you've got a pocket clip which is laser engraved titanium. It'S movable forgot to mention that only in a tip-up carry, but you can put it on either side of the bike handle only on the bike handle not the safe handle overall length. Seven point: two: nine inches clothes length is four point: three nine inches sheath material sheath is sold separately. You do get a little pouch

Benchmade 32 Morpho -  Knife Review

Gerber has been making survival knives for the US Military since 1968. The Strong-arm Fixed Blade carries on our legacy of tough-as-hell fixed blade knives for combat and survival applications. With a sheath that can be mounted in a variety of ways, this knife offers reliable use whether on-duty or off. Featuring a fine edge, full tang 420HC blade with black ceramic coating, the Strong-arm was designed around the fundamentals of military survival training. Obtain a solid grip on the knife in all conditions with its diamond-texture rubberized handle. The striking pommel positioned at the base of the handle functions to break through hard surfaces for effective rescue operations, and ceramic coating on the blade offers subtle use through low visual profile, as well as preventing corrosion for long life of the blade. The Strong Arm's modular sheath system is as important as the knife itself. With the sheath's snap-together components, the operator can mount the knife vertically on MOLLE, horizontally on a standard 1.75" tactical belt, or in a traditional drop-leg belt mount fashion. The Strong-arm Fixed Blade is designed and built in Portland, Oregon.

cabelas.com

rei.com

amazon.com

walmart.com

bladereviews.com

r/knives

r/knifeclub

 The BG Ultimate Pro came with a perfect edge grind and it's made in China, I thought MADE IN AMERICA stood for quality, guess I was wrong, that's 2 knives with horrible edge grinds. I have bought 3 MADE IN AMERICA Strongarms, so far only 1 is a keeper.  ****Gerber sent me a new knife with a decent edge and accomplished what the seller could not. Their customer service is very good but it does not make up for turning out botched edge grinds

  ****Gerber sent me a new knife with a decent edge and accomplished what the seller could not. Their customer service is very good but it does not make up for turning out botched edge grinds. I'd like to see Gerber pay more attention to what they send out the door.*****

The product arrived with a terrible edge grind, uneven and rolled edge, I am exchanging it, hopefully for a new one. The first one had been repackaged. The weight of the knife feels good and I think if I get one with a decent edge on it I will love it and probably give it 4 stars. The grip is slim but it feels good in the hand

 The weight of the knife feels good and I think if I get one with a decent edge on it I will love it and probably give it 4 stars. The grip is slim but it feels good in the hand.  Update, the seller replaced the first one. The edge is just as bad if not worse than the first, I guess I need to contact Gerber, you'd think the seller would want to send me a good one

Poor craftsmanship, good customer service

I found the handle does get slippery when wet, especially the top and bottom part of the handle that is in line with the spine and edge of the blade as that portion is smooth and without the diamond pattern.  Also, the thumb/finger guards near the spine and blade respectively were very slippery even when dry.  I used grip tape for the handle which seems to hold for now, however grip tape for the thumb guards always slid off after a few days.  I decided to stipple the thumb guards with a soldering iron (most people use a wood burner tool instead for stippling

Yes you can and probably should stipple the thumb/finger guards

 Now it seems the knives don't even survive a day out of the package. Gerber gets a lot of hate for using "cheap" 420 HC stainless steel. I'm no steel expert so I can't speak to that, though I do know treatment and tempering play a big part, and that may be where they are lacking.  I would give 1 or 2 stars, but Gerber supposedly has lifetime guarantees on their knives and will replace them, and I don't think it's fair for me to down rate that much without first giving the company a chance to make it right (I don't have the knife in my possession anymore or I would)

Flawed tip. Gerber has a quality control problem

 For splitting wood that is a big deal and represents a significant portion of the limited straight surface of the blade. Secondly, in doing some 'simulated' feathering I felt that the cutout in the middle of the grip made it a bit too skinny for my hand. Overall though it's such a nice piece that I probably would have kept it in spite of these limitations, if it wasn't for the finish on the blade, which was just not satisfactory. The grind was rough, unequal on the two sides, uneven (wandering) along the length of the blade and on one side, the bevel stopped short of the tip

 Where there should have been a finely honed point there was a one-sided cutting edge and a little lump of metal sticking up from the tip. It's disappointing to see this coming out of Portland - it really looked like whoever put the grind on this knife was checking their facebook at the same time. You can have state-of-the-art manufacturing, but it's the last person to touch it who controls what the customer thinks of your product. I feel that Gerber could take an extra minute to put a bit better edge on their product, and maybe finish with a finer grit rather than leaving it essentially micro-serrated

 Now for the cons. I was disappointed that the cutting edge stops about half an inch short of the handle. For splitting wood that is a big deal and represents a significant portion of the limited straight surface of the blade. Secondly, in doing some 'simulated' feathering I felt that the cutout in the middle of the grip made it a bit too skinny for my hand

 Overall though it's such a nice piece that I probably would have kept it in spite of these limitations, if it wasn't for the finish on the blade, which was just not satisfactory. The grind was rough, unequal on the two sides, uneven (wandering) along the length of the blade and on one side, the bevel stopped short of the tip. Where there should have been a finely honed point there was a one-sided cutting edge and a little lump of metal sticking up from the tip. It's disappointing to see this coming out of Portland - it really looked like whoever put the grind on this knife was checking their facebook at the same time

Decided not to keep it, here's why

. you have to stabilize the sheath at the same time as you are trying (at an awkward angle) to pop the knife out of the sheath with your thumb. And that is assuming it is hanging where you want it to in the first place, which, if you're moving around much, it probably won't be. The pics show the relative movement that is easily possible and that makes removing it difficult

 But for something like this, the sheath is an integral aspect of the design, and unless you plan to use it with a MOLLE setup, I'd suggest getting something else. The retention system works very well and holds the knife very securely - you have to grip the handle and push pretty hard on one of the ambidextrous thumb ledges to disengage the knife from the sheath. This thing is in no danger of falling out on accident! I would imagine that if you had the sheath secured to the front of your body armor or on a pack shoulder strap, you could grab it and yank it out.

Hard to use without MOLLE

  Value: 3/5 Aesthetics:4/5 Handle: 4/5 Sheath: 3/5 Factory grind: 0/5  Grind and factory edge was hilariously bad. I mean, I really can't believe it. Chineese products have never looked better after I got my hands on this thing! True jokes aside.

 No one is going to look at you sideways when you use it for pedestrian tasks.  The sheath is over hyped, sure its great if you want to throw it on a backpack but the CC options are not plenty. Also, one of the belt positions(would be the best position too) isn't usable because of bad engineering. It does stay in place great when it knocks into stuff from sticking out too far because of that flaw though

Dull out of the box.

The knife looks and feels strong and well made. It and cuts very well and came sharp. The edge grinds are even. The main body of the sheath is sturdy and well put together

 Whoever invented this (and whoever approved this design as well!) should be fired. Its ridiculous. The knife/sheath just flop around twisting and turning on this thin piece of webbing. I can't wait to get after it and replace that part of the sheath with something that will actually work properly

..The nylon belt attachment is a disaster. Specifically, the problem is where/how it attaches to the plastic body of the sheath with a thin, flimsy piece of nylon webbing and a single strap

The nylon belt attachment is a disaster. Specifically, the problem is where/how it attaches to the plastic body of the sheath with a thin, flimsy piece of nylon webbing and a single strap. Whoever invented this (and whoever approved this design as well!) should be fired. Its ridiculous

Benchmade - BM32 vs Gerber StrongArm Fixed Blade Knife

Reviews by Topic

Blade

Material

Weight

QUICK QUESTION!

You might also like