Hiking Boots/Shoes Recommendations?

Hiking boot recommendations?

Any recommendations for women's hiking shoes?

[Request] Hiking/outdoorsy style shoes that can handle lots of walking on concrete

Cold and wet weather hiking boots recommendations?

I am in need of a new pair of trail/hiking boots.

Hiking Boots for heavy use during the summer

Good pair of hiking shoes?

[Request] waterproof hiking shoes

[request] - Good quality walking shoes.

Hello Redditors. I'm in search of a classy yet extremely durable pair of hiking boots to take backpacking around the world for 12+ months with.

Hiking boots recommendations

Men's three season "urban hiker" (like Merrell MOAB but longer lasting)

BIFL Hiking boots for women

Hiking boots with good traction and can stand up to abuse.

Looking for a good pair of shoes for my weird feet

Request - Hiking Sandals

Request: Hiking Boots

Comfortable and cushiony shoes for walking on pavement 10KM/couple hours a day (UK)

Hiking sandals that last?

[Request] Powerful dishwasher with sanitize function?

I want the best god damned dishwasher money can buy.

Looking for the best, easiest to operate, cheapest dishwasher - Recommendation?

[Request] Best countertop dishwasher for reasonable price?

Can anyone recommend a good dishwasher?

Countertop/Portable Dishwasher

[Request] Dishwasher &lt;$1k Australian with QOL features and low water use

Dishwasher for Second Home

My friend bought a house with this KichenAid dishwasher from 1974. He says it works better than any of the other ones he has owned. He just has to convince his wife not to replace it.

What's a good Panel ready dishwasher under $1k?

Best socket set on the market $100-$150

[Request] Socket wrenches

I need a recommendation for a tool set that should last a lifetime. [Request]

Looking for a Mechanics tool set.

23 years later; GM Goodwrench socket set.

A Starter/Lifetime Tool set

Basic screwdriver set needed

Mechanic Tools that are BIFL

Trying to fill a tool roll for my truck and would like input on BFL tools like wrenches, pliers, socket sets, etc.

BIFL: Mastercraft ratchet set with lifetime warranty. Got it at 14, im 31. Went thru more abuse than you think!

Looking to upgrade my home hand tools

Was told to post this here. Husky 270pc toolset from Home Depot for $99, normally $199. Lifetime warranty too

[Request] Ratchet/Wrench/Etc tool set for home/bicycle/general use

Thoughts on a Honda Accord V6 2007?

2010 Honda Accord worth the buy?

Thoughts on a 2008 Honda accord v6 coupe EX-L?

2014 honda accord ??

After an initial round of research it seems like Honda Accord Hybrid is the right answer, but I want to pressure test that with you guys

2014 Accord V6 Touring (any thoughts?)

Which car ?

me again. 2010 2dr honda accord, 122k miles for $5,800. just want a reliable first car, thoughts?

Want to buy an Accord, any suggestions?

2020/2021 Honda Accord LX - Tell Me About Your Likes/Dislikes

Compact - Midsize suv

best small/midsize suv?

Looking for a used (06-14) reliable compact/mid-size SUV

compact/mid size suv

Midsize SUV

Recommendations for midsized SUVs to look at

Compact to Mid-Size SUV

Small to mid-size suv suggestions?

Midsize vehicle for three kids

Mid-Size SUV

Just tried a Lotus Elise Cup 250, driving impressions !

Dan Neil reviews Lotus Emira: As Good As It Gets

Considering a Lotus Elise - USA

How affordable are Lotus Elises from the 2005-2012 model year?

Lotus Exige Sport Final Edition review: farewell, Exige

I wanna know everything you know about a 2005 Lotus Elise

My Lotus Evora Review

Lotus retail sales up 24% in best performance for a decade

2022 Lotus Emira Looks to Be One of the Brand's Best

PURCHASING A LOTUS — Need Tips + Advice.

Looking for a good rpg/action adventure with a good story and good characters

Deep long rpgs?

Looking for a story-focused RPG

Looking for a complex RPG

Fantasy games with an detailed and immersive world?

[WSIB] I am in search for a open world RPG that will keep me busy for hundreds of hours.

Open world game with huge map, lots of things to do, and great graphics

WSIB Feeling a bit of an rpg lull and want something exciting like old school BioWare with a engaging story that doesn’t take 100 hours to play.

WSIB: long, immersive games with high quality storytelling and writing

looking for an open-world rpg

[WSIB] A turn based strategy game that isn’t 4X

Turn-based strategy game

Turn-based strategy games

[WSIB] Small-scale, medieval, strategy game, featuring pikemen and cavalry

(WSIB) Turn-based ”wargaming” game

[WSIB] Turn Based Strategy games

WSIB if I want a strategy game for dummies

WSIB Strategic Rpg

[WSIB] Good offline strategy/(ish) games?

What are some good "smaller scale to control, but still feel large scale battle" tactical / strategy games?

Bullet Hell-Type Games: Atomicrops vs. I, Dracula: Genesis vs. Others?

WSIB if i want a completely story driven indie game but have already played undertale and oneshot (preferably similar to those 2)

Post apocalyptic enthusiast, Underrail or Atom RPG?

[SIB] Undermine or Atomicrops

WSIB if I like "Run into things, need to grow in power/special items to move further so I come back after unlocking said element" type of games.

Blsoodborne or Resident evil 2 ?

What should I buy? Animal Crossing: New Horizons or Doom: Eternal

[WSIB] Fast-paced top-down roguelikes?

[SIB] I Hate Running Backwards or Planetary Dustoff? Or something else?

SIB Nuclear Throne?

What can you recommend for minimizing pores?

I know you can’t get rid of pores but I’m wondering is there anyway to make them smaller? I use La Roche Posay products. They keep my acne mostly at bay but I feel like my pores are just so large. Part of it is genetic, but just wondering if there’s anything else I can do at home to help. Thanks!

OPEN PORES- WHAT TO DO? IS THERE ANY PRODUCT I CAN USE?

What skincare products have you used that helped with large pores?

What is the best thing to use to tighten pores on your face?

Can anyone tell me why my pores are so huge and what I can do to minimize them?

How to reduce pores.

Hey guys, how do I make my pores not look like this? Info in comments (deleted and reposted for an error in the title)

Pores reduction tips?

Advice for shrinking pores on and around nose?

[sun care] sunscreen that doesn’t irritate rosacea and perioral dermatitis

[Sun Care] Looking for sunscreen that doesn't irritate Rosacea

Sunscreen recommendations for rosacea

Looking for a sunscreen for my acne prone skin.

[Sun Care] looking for a sunscreen that works well for people with Eczema.

Desperate for a good sunscreen

Looking for a Daily Suncreen

I’ve tried them all and I still can’t find my holy grail for my dry rosacea skin. Any other recommendations?

Sunscreen, eczema and makeup, Help [Sun care]

[Sun Care] Help with not being able to use Sunscreen

How can i stop a really greasy face?

How to best defeat oily skin?

Is there any long-lasting solution for oily face?

Oily Face -&gt; Wash Face -&gt; More Oily

Extremely oily skin

Y’all know some sort of cream or product I can buy to make my face less greasy looking?

super oily face help needed

Oily Skin— please help!

Really oily skin

How to have less oily skin?

Adrian Krebs

Johannes Engler

Tavis Lochhead

amazon.com

Maker's Muse

Honey Badger 3D Print and Paint

Robert Cowan

r/3Dprinting

Any filament bundled with printers is going to be around 10€/kg in value if you are lucky. Better to buy a fresh roll rather than get confused why old wet filament of the cheapest blend prints like poop and replace your entire extruder trying to diagnose the problem.

Hey guys! 
I am following this community for a while now and I am looking for your help. I would really appreciate it. 

Here is a list of a few printers that I think look pretty good. I just want to know which one is the best or if everyone isn’t the best choice:

- Creality Ender 3 v2 (used): 200€ with extra upgrade extruder 

- Anycubic Mega SE (new): 180€ with 1kg PLA

- Anycubic Mega Zero 2.0 (used): 100€

- Anycubic i3 Mega S (new): 215€ with 1kg PLA

- Anycubic Mega X (new SALE): 240€ with 1kg PLA

- Artillery Genius (used): 200€ with 3kg PLA

- Sovol SV01 (used): 235€ with a few upgrades like


I would really appreciate your help, because I am a little bit lost. This printer would be my first one and I try to pay as less as possible. 
Also I am open for other recommendations:) 
Please let me know if you need any further informations for this offers. (All new Anycubic printer are officially from the Anycubic site with a Valentine’s Day sale)

<div class="md">Hey guys! 
I am following this community for a while now and I am looking for your help. I would really appreciate it. 

Here is a list of a few printers that I think look pretty good. I just want to know which one is the best or if everyone isn’t the best choice:

<ul>
<li>Creality Ender 3 v2 (used): 200€ with extra upgrade extruder </li>
<li>Anycubic Mega SE (new): 180€ with 1kg PLA</li>
<li>Anycubic Mega Zero 2.0 (used): 100€</li>
<li>Anycubic i3 Mega S (new): 215€ with 1kg PLA</li>
<li>Anycubic Mega X (new SALE): 240€ with 1kg PLA</li>
<li>Artillery Genius (used): 200€ with 3kg PLA</li>
<li>Sovol SV01 (used): 235€ with a few upgrades like</li>
</ul>

I would really appreciate your help, because I am a little bit lost. This printer would be my first one and I try to pay as less as possible. 
Also I am open for other recommendations:) 
Please let me know if you need any further informations for this offers. (All new Anycubic printer are officially from the Anycubic site with a Valentine’s Day sale)

EDIT: I am living in Germany
</div>

First Printer for beginner

 But again, that's that's easy enough to do nice, consistent, extrusion, no, real, no, real signs of of anything that needs to be adjusted on the tool head there. I really love these. These are print in place, iris cubes and they are fantastic tolerance tests. So it prints all in one like this, and then you break the tabs at the bottom and then you're able to do this really really nicely done, came out really cool, because this prints like this, it means when it's closed

 Let me be clear: on the channel. We actually have three x ones, we genuinely love them, they've been workhorses, they do really high quality prints and they've been pretty reliable. Um and i you know i've. I'Ve certainly really enjoyed using mine

Artillery Sidewinder X2 - Review and first prints

I would not recommend this printer. It's extremely finicky and has broken down requiring parts 3 times since purchase. Only 6 months. It's now a brick

It has broken down 3 times within the first 6 months

 Ease of use encompasses everything that is from when you get the printer in the box to getting that first print. You know, can you give this to your grandma? Can you give this to a friend? That'S never done 3d printing. Before that's the kind of focus of this category and with the sidewinder x2, i kind of found it to be a little bit below average. The manual really isn't that great the documentation is a little bit lacking

 A lot slower, you'd see probably a larger gap in that. So just take that into account. So the last category is value now. The way i calculate value is based on a zero to twenty five hundred dollar range, because that is about the range of most hobbyist level: 3d printers

 This printer has a few decent quality of life things it has the filament out sensor. It'S got the auto power off things where it will kind of reset the head, so you can power it back on and resume the print, that's kind of nice. It'S got a usb, it's got. The two usb sticks over there like micro, sd and then the usb card socket

 So it is made to be a larger format printer and it has a couple little bells of whistles like it's got a touch screen and you know fit and finish is overall pretty good and it even has the dual z drive, and you know just some nice Little pieces of fit and finish and i'll get into this in more detail when i actually view the printer, this is sitting around 450, give or take depending on the week in the month, but that's about what it retails for so let's dive straight into ease of Use so what i'm trying to do is boil a 3d printer down into five basic categories, give them a ranking and then kind of give it an overall score. The first one of these categories is ease of use. Ease of use encompasses everything that is from when you get the printer in the box to getting that first print. You know, can you give this to your grandma? Can you give this to a friend? That'S never done 3d printing

 It has a direct drive. Extruder we've got the filament sensor, we've got a touch probe and then even has a volcano style extruder, it's not an actual e3d volcano, but it is similar and i'm to understand that you can use volcano nozzles in this. So it is made to be a larger format printer and it has a couple little bells of whistles like it's got a touch screen and you know fit and finish is overall pretty good and it even has the dual z drive, and you know just some nice Little pieces of fit and finish and i'll get into this in more detail when i actually view the printer, this is sitting around 450, give or take depending on the week in the month, but that's about what it retails for so let's dive straight into ease of Use so what i'm trying to do is boil a 3d printer down into five basic categories, give them a ranking and then kind of give it an overall score. The first one of these categories is ease of use

Artillery Sidewinder X2 Review

shopify

notebookcheck.net

techradar.com

The 3D Print General

247printing

Concerning print speed and quality, this is where the P1P stands out. At first, the speed is frightening, and it isn't easy to imagine how anything that prints at that speed can produce something aesthetically pleasing or even functional. However, the print quality is excellent despite the mistrust over the speed, and when it comes to dimensional accuracy again, the printer doesn't fail to impress.&nbsp;

Insane speed and quality make the P1P a firm favorite

 But first, let's check the capabilities of the Pemboolab… Pembuh… Pamperslab. What about Pamperslab? What about Pamperslab?

 And now with a lower-cost version of the DX1 series, the stripped down P1P. Let's check out if it's worth the still-high price tag and if there's still a reason left to go for a Prusa Mark 3. Bamboo Lab provided the review unit for this video. Thank you

 The P1P is 784€ here in Germany. That's 333€ less than the X1 series and that's 65€ less than the Prusa Mark 3 kit. In comparison to the regular X1, so the non-carbon X1, the P1P lacks the enclosure and the LED lighting for the build space by default. The smartphone-like touchscreen of the X1 series is replaced by a simpler and cheaper monochrome LCD display with a directional pad

 Here in Germany we have 90% VAT and shops of all kinds usually state gross prices for end-consumers. So, I compare gross prices instead of net prices here. The P1P is 784€ here in Germany. That's 333€ less than the X1 series and that's 65€ less than the Prusa Mark 3 kit

Visit PCBWay, the sponsor of this Video:
https://www.pcbway.com/


The P1P is a lower cost printer in their lineup made to stir up the market!
How reduced is the experience in comparison to the X1 series? 
Is there any impact at the performance? 
HOW FAST IS IT REALLY?
How much do it yourself and “self-expression” is really possible with the P1P?! 
And… Is there still any reason left to choose a Prusa i3 printer?! 
Check out the 247printing review of the Bambu Lab P1P !


Support Albert and 247printing on Patreon:
https://www.patreon.com/247printing


247printing on social media:
------------------------------------------------
Twitter https://bit.ly/3tSh8M2
TikTok: https://bit.ly/3FIHqWv
Instagram https://bit.ly/37b94yf
Discord https://bit.ly/3Cy5jPf


Get a Prusa MK3S+ kit here*: http://bit.ly/3hKW4oT

Bambu Lab Shop*: https://eu.store.bambulab.com/

Awesome(!) EIBOS Filament Dryer*: https://amzn.to/3BX1Lqm

Music*: Def Lev – “Dawn Wall” - loyalty free at Epidemic Sound:
https://share.epidemicsound.com/x5gyyu



Videos mentioned*:
------------------
How fast is Klipper really?! https://youtu.be/Ae2G7hl_pZc
Energy Saving in 3D printing! https://youtu.be/P2PxI1F4vsw
3D Druck Stromkosten (mpoxDE) https://youtu.be/c1qjPLyMZHE



Good Sources for printers and parts*:
-----------------------------------------
LDO Docs and Sources https://bit.ly/3KCSoy4
LDO Voron 2.4 Kit (3DJAKE) https://tidd.ly/3siqkJr
FLSUN V400 (3DJAKE) https://tidd.ly/3D07w6x


Recommmended alternative sources for FAST PRINTERS*:
---------------------------
Voron 0.1 (AliExpress): https://bit.ly/39kfWdC
Voron 2.4 (AliExpress): https://bit.ly/3PklmWE
Voron Trident (AliExpress): https://bit.ly/3yxMaNe


0:00 Intro and Sponsor
2:21 Specs, Features, Prices
5:45 Performance tested and compared
10:26 Modding and DIY
14:18 Conclusion
16:59 Outtakes and Outro



*Can be affiliate links at no extra cost.

Bambu Lab P1P REVIEW - HOW GOOD IS IT REALLY

 The P1P is a lower-cost printer in the lineup made to stir up the market.

 How reduced is the experience in comparison to the X1 series?

 How much do-it-yourself and self-expression is really possible?

 And is there still any reason left to choose a Pluja i3 printer?

 PCBWay offers a wide range of services like 3D printing, CNC machining, sheet metal fabrication,

 injection molding and of course PCB production.

 And oh, have you seen the 2022 big Christmas sale on PCBWay.com?

 There has never been a better time to go the PCBWay for prototyping.

 For a limited time you get big discounts for various products and services.

 Check out PCBWay.com, link in the video description.

 Over the last decade, Joseph Prusa was greatly influencing and improving the maker community,

 Whenever asked, my recommendation to anyone who wanted an easy start into 3D printing

 It's not the cheapest but it's the best overall experience for a hassle-free start.

 This year Bamboo Lab literally changed everything with DX1 and DX1 Carbon.

 Clever DJI engineers finally brought FDM high-tech to the masses at reasonable prices for what

 The resulting hype was overwhelming for everyone who is interested in 3D printing and who might

 Over around 10 years Prusa profited from slow but steady progress in RepRap with tailoring

 regular product evolutions for his loyal fans.

 Latest and most appreciated example, the Prusa Mark 3S Plus, which I built from a kit and

 which I used with a lot of joy for the last two years.

 Now there is Bamboo Lab, about to change everything.

 Ultra-professional, mass-produced high-end products.

 And now with a lower-cost version of the DX1 series, the stripped down P1P.

 Let's check out if it's worth the still-high price tag and if there's still a reason left

 Bamboo Lab provided the review unit for this video.

 Bamboo Lab has a very strict review policy, which means there is none.

 I am 100% free to express my own opinion.

 Bamboo Lab states net prices, excluding VAT on their shop.

 Here in Germany we have 90% VAT and shops of all kinds usually state gross prices for

 So, I compare gross prices instead of net prices here.

 That's 333€ less than the X1 series and that's 65€ less than the Prusa Mark 3 kit.

 In comparison to the regular X1, so the non-carbon X1, the P1P lacks the enclosure and the LED

Artillery Sidewinder X2 vs Bambulab p1p

QUICK QUESTION!

You might also like