Hiking Boots/Shoes Recommendations?

Hiking boot recommendations?

Any recommendations for women's hiking shoes?

[Request] Hiking/outdoorsy style shoes that can handle lots of walking on concrete

Cold and wet weather hiking boots recommendations?

I am in need of a new pair of trail/hiking boots.

Hiking Boots for heavy use during the summer

Good pair of hiking shoes?

[Request] waterproof hiking shoes

[request] - Good quality walking shoes.

Hello Redditors. I'm in search of a classy yet extremely durable pair of hiking boots to take backpacking around the world for 12+ months with.

Hiking boots recommendations

Men's three season "urban hiker" (like Merrell MOAB but longer lasting)

BIFL Hiking boots for women

Hiking boots with good traction and can stand up to abuse.

Looking for a good pair of shoes for my weird feet

Request - Hiking Sandals

Request: Hiking Boots

Comfortable and cushiony shoes for walking on pavement 10KM/couple hours a day (UK)

Hiking sandals that last?

[Request] Powerful dishwasher with sanitize function?

I want the best god damned dishwasher money can buy.

Looking for the best, easiest to operate, cheapest dishwasher - Recommendation?

[Request] Best countertop dishwasher for reasonable price?

Can anyone recommend a good dishwasher?

Countertop/Portable Dishwasher

[Request] Dishwasher &lt;$1k Australian with QOL features and low water use

Dishwasher for Second Home

My friend bought a house with this KichenAid dishwasher from 1974. He says it works better than any of the other ones he has owned. He just has to convince his wife not to replace it.

What's a good Panel ready dishwasher under $1k?

Best socket set on the market $100-$150

[Request] Socket wrenches

I need a recommendation for a tool set that should last a lifetime. [Request]

Looking for a Mechanics tool set.

23 years later; GM Goodwrench socket set.

A Starter/Lifetime Tool set

Basic screwdriver set needed

Mechanic Tools that are BIFL

Trying to fill a tool roll for my truck and would like input on BFL tools like wrenches, pliers, socket sets, etc.

BIFL: Mastercraft ratchet set with lifetime warranty. Got it at 14, im 31. Went thru more abuse than you think!

Looking to upgrade my home hand tools

Was told to post this here. Husky 270pc toolset from Home Depot for $99, normally $199. Lifetime warranty too

[Request] Ratchet/Wrench/Etc tool set for home/bicycle/general use

Thoughts on a Honda Accord V6 2007?

2010 Honda Accord worth the buy?

Thoughts on a 2008 Honda accord v6 coupe EX-L?

2014 honda accord ??

After an initial round of research it seems like Honda Accord Hybrid is the right answer, but I want to pressure test that with you guys

2014 Accord V6 Touring (any thoughts?)

Which car ?

me again. 2010 2dr honda accord, 122k miles for $5,800. just want a reliable first car, thoughts?

Want to buy an Accord, any suggestions?

2020/2021 Honda Accord LX - Tell Me About Your Likes/Dislikes

Compact - Midsize suv

best small/midsize suv?

Looking for a used (06-14) reliable compact/mid-size SUV

compact/mid size suv

Midsize SUV

Recommendations for midsized SUVs to look at

Compact to Mid-Size SUV

Small to mid-size suv suggestions?

Midsize vehicle for three kids

Mid-Size SUV

Just tried a Lotus Elise Cup 250, driving impressions !

Dan Neil reviews Lotus Emira: As Good As It Gets

Considering a Lotus Elise - USA

How affordable are Lotus Elises from the 2005-2012 model year?

Lotus Exige Sport Final Edition review: farewell, Exige

I wanna know everything you know about a 2005 Lotus Elise

My Lotus Evora Review

Lotus retail sales up 24% in best performance for a decade

2022 Lotus Emira Looks to Be One of the Brand's Best

PURCHASING A LOTUS — Need Tips + Advice.

Looking for a good rpg/action adventure with a good story and good characters

Deep long rpgs?

Looking for a story-focused RPG

Looking for a complex RPG

Fantasy games with an detailed and immersive world?

[WSIB] I am in search for a open world RPG that will keep me busy for hundreds of hours.

Open world game with huge map, lots of things to do, and great graphics

WSIB Feeling a bit of an rpg lull and want something exciting like old school BioWare with a engaging story that doesn’t take 100 hours to play.

WSIB: long, immersive games with high quality storytelling and writing

looking for an open-world rpg

[WSIB] A turn based strategy game that isn’t 4X

Turn-based strategy game

Turn-based strategy games

[WSIB] Small-scale, medieval, strategy game, featuring pikemen and cavalry

(WSIB) Turn-based ”wargaming” game

[WSIB] Turn Based Strategy games

WSIB if I want a strategy game for dummies

WSIB Strategic Rpg

[WSIB] Good offline strategy/(ish) games?

What are some good "smaller scale to control, but still feel large scale battle" tactical / strategy games?

Bullet Hell-Type Games: Atomicrops vs. I, Dracula: Genesis vs. Others?

WSIB if i want a completely story driven indie game but have already played undertale and oneshot (preferably similar to those 2)

Post apocalyptic enthusiast, Underrail or Atom RPG?

[SIB] Undermine or Atomicrops

WSIB if I like "Run into things, need to grow in power/special items to move further so I come back after unlocking said element" type of games.

Blsoodborne or Resident evil 2 ?

What should I buy? Animal Crossing: New Horizons or Doom: Eternal

[WSIB] Fast-paced top-down roguelikes?

[SIB] I Hate Running Backwards or Planetary Dustoff? Or something else?

SIB Nuclear Throne?

What can you recommend for minimizing pores?

I know you can’t get rid of pores but I’m wondering is there anyway to make them smaller? I use La Roche Posay products. They keep my acne mostly at bay but I feel like my pores are just so large. Part of it is genetic, but just wondering if there’s anything else I can do at home to help. Thanks!

OPEN PORES- WHAT TO DO? IS THERE ANY PRODUCT I CAN USE?

What skincare products have you used that helped with large pores?

What is the best thing to use to tighten pores on your face?

Can anyone tell me why my pores are so huge and what I can do to minimize them?

How to reduce pores.

Hey guys, how do I make my pores not look like this? Info in comments (deleted and reposted for an error in the title)

Pores reduction tips?

Advice for shrinking pores on and around nose?

[sun care] sunscreen that doesn’t irritate rosacea and perioral dermatitis

[Sun Care] Looking for sunscreen that doesn't irritate Rosacea

Sunscreen recommendations for rosacea

Looking for a sunscreen for my acne prone skin.

[Sun Care] looking for a sunscreen that works well for people with Eczema.

Desperate for a good sunscreen

Looking for a Daily Suncreen

I’ve tried them all and I still can’t find my holy grail for my dry rosacea skin. Any other recommendations?

Sunscreen, eczema and makeup, Help [Sun care]

[Sun Care] Help with not being able to use Sunscreen

How can i stop a really greasy face?

How to best defeat oily skin?

Is there any long-lasting solution for oily face?

Oily Face -&gt; Wash Face -&gt; More Oily

Extremely oily skin

Y’all know some sort of cream or product I can buy to make my face less greasy looking?

super oily face help needed

Oily Skin— please help!

Really oily skin

How to have less oily skin?

Adrian Krebs

Johannes Engler

Tavis Lochhead

amazon.com

r/3Dprinting

 After several failures I found the build plate was warped, I checked the build plate on a granite countertop and it wabbled from side to side.  The WiFi features only works with their mobile app, not with Photon Workshop and is only useful to monitor your prints, you still have go to the machine to load files to print. The delete function on the mobile apps deletes the file you select but only from the mobile app not from the USB stick so when you restart it the file shows up again. Another issue was every time your network assigns a new IP address to the printer you must add another profile in the mobile app, as you cannot delete or edit the previous profiles

 The delete function on the mobile apps deletes the file you select but only from the mobile app not from the USB stick so when you restart it the file shows up again. Another issue was every time your network assigns a new IP address to the printer you must add another profile in the mobile app, as you cannot delete or edit the previous profiles. Even their support person said the app was still under development.  I saw the cracking in the lid mentioned in several of the other reviews but I hoped it was just from people not being careful enough but even being extremely careful to avoid getting any resin or alcohol on the lid it started showing tiny cracks – why would Anycubic use a cheaper material that was not resistant to the normal resins and cleaning solutions that you need to use with it?  Finally, the touchscreen seemed like a very low quality touchscreen, you have to hit the exact spot to get it to recognize your selection and it often picks the wrong selection

Not quite ready for release

The EPAX seems like the best choice, but it’s over my price range once I factor in other stuff like the curing station. The 4K printers seem to be underproduced and only one of the companies even has parts for sale. It might just be cheaper and better using a big 3d printer company to print out my stuff, but I'm not sure on their prices.

**Must be a reputable company that has the printer and parts in stock for sale now**, not a month from now. 

 Happy New Year everyone! Welcome back to another purchase megathread!

For a link to last month's post, see [here](https://www.reddit.com/r/3Dprinting/comments/koaslp/purchase_advice_megathread_what_to_buy_who_to_buy/).

This thread is meant to conglomerate purchase advice for both newcomers and people looking for additional machines. Keeping this discussion to one thread means less searching should anyone have questions that may already have been answered here, as well as more visibility to inquiries in general, as comments made here will be visible for the entire month stuck to the top of the sub, and then linked to in the next month's thread.

If you are new to 3D printing, and are unsure of what to ask, try to include the following in your posts as a minimum:

* Your budget, set at a numeric amount. Saying "cheap," or "money is not a problem" is not an answer people can do much with. 3D printers can cost $100, they can cost $10,000,000, and anywhere in between. A rough idea of what you're looking for is essential to figuring out anything else.
* Your country of residence.
* If you are willing to build the printer from a kit, and what your level of experience is with electronic maintenance and construction if so.
* What you wish to do with the printer.
* Any extenuating circumstances that would restrict you from using machines that would otherwise fit your needs (limited space for the printer, enclosure requirement, must be purchased through educational intermediary, etc).

While this is by no means an exhaustive list of what can be included in your posts, these questions should help paint enough of a picture to get started. Don't be afraid to ask more questions, and never worry about asking too many. The people posting in this thread are here because they want to give advice, and any questions you have answered may be useful to others later on, when they read through this thread looking for answers of their own. Everyone here was new once, so chances are whoever is replying to you has a good idea of how you feel currently.

Additionally, a quick word on print quality: Most FDM/FFF (that is, filament based) printers are capable of approximately the same tolerances and print appearance, as the biggest limiting factor is in the nature of extruded plastic. **Asking if a machine has "good prints," or saying "I don't expect the best quality for $xxx" isn't actually relevant for the most part** with regards to these machines. Should you need additional detail and higher tolerances, you may want to explore SLA, DLP, and other photoresin options, as those *do* offer an increase in overall quality. If you are interested in resin machines, make sure you are aware of [how to use them safely](https://www.reddit.com/r/3DPrinting/wiki/resinprinting#wiki_safety). For these reasons we don't usually recommend a resin printer as someone's first printer.

As always, if you're a newcomer to this community, welcome. If you're a regular, welcome back.

<div class="md">Happy New Year everyone! Welcome back to another purchase megathread!

For a link to last month&#39;s post, see <a href="https://www.reddit.com/r/3Dprinting/comments/koaslp/purchase_advice_megathread_what_to_buy_who_to_buy/">here</a>.

This thread is meant to conglomerate purchase advice for both newcomers and people looking for additional machines. Keeping this discussion to one thread means less searching should anyone have questions that may already have been answered here, as well as more visibility to inquiries in general, as comments made here will be visible for the entire month stuck to the top of the sub, and then linked to in the next month&#39;s thread.

If you are new to 3D printing, and are unsure of what to ask, try to include the following in your posts as a minimum:

<ul>
<li>Your budget, set at a numeric amount. Saying &quot;cheap,&quot; or &quot;money is not a problem&quot; is not an answer people can do much with. 3D printers can cost $100, they can cost $10,000,000, and anywhere in between. A rough idea of what you&#39;re looking for is essential to figuring out anything else.</li>
<li>Your country of residence.</li>
<li>If you are willing to build the printer from a kit, and what your level of experience is with electronic maintenance and construction if so.</li>
<li>What you wish to do with the printer.</li>
<li>Any extenuating circumstances that would restrict you from using machines that would otherwise fit your needs (limited space for the printer, enclosure requirement, must be purchased through educational intermediary, etc).</li>
</ul>

While this is by no means an exhaustive list of what can be included in your posts, these questions should help paint enough of a picture to get started. Don&#39;t be afraid to ask more questions, and never worry about asking too many. The people posting in this thread are here because they want to give advice, and any questions you have answered may be useful to others later on, when they read through this thread looking for answers of their own. Everyone here was new once, so chances are whoever is replying to you has a good idea of how you feel currently.

Additionally, a quick word on print quality: Most FDM/FFF (that is, filament based) printers are capable of approximately the same tolerances and print appearance, as the biggest limiting factor is in the nature of extruded plastic. Asking if a machine has &quot;good prints,&quot; or saying &quot;I don&#39;t expect the best quality for $xxx&quot; isn&#39;t actually relevant for the most part with regards to these machines. Should you need additional detail and higher tolerances, you may want to explore SLA, DLP, and other photoresin options, as those do offer an increase in overall quality. If you are interested in resin machines, make sure you are aware of <a href="https://www.reddit.com/r/3DPrinting/wiki/resinprinting#wiki_safety">how to use them safely</a>. For these reasons we don&#39;t usually recommend a resin printer as someone&#39;s first printer.

As always, if you&#39;re a newcomer to this community, welcome. If you&#39;re a regular, welcome back.
</div>

Purchase Advice Megathread: What To Buy, Who To Buy It From, And More, In February 2021

I've owned a number of these printers for work. They are cheap enough to initially purchase, but if your printer stops working, be prepared for lengthy delays before its back up and running. I received this new printer from Amazon and its screen wasn't working. It took me 2 weeks of back and forth with AnyCubic IT before they agreed to send me another monitor and another month to receive it

Not all Mono X printers arrive in working condition

  I used anycubic gray resin 405 microns...leveling the bed is a simple task, and there's nothing else for configuration

The build plate comes warped from the factory

 I have actually bought said competitor's printer and it came with a completely level build plate and guess what? My prints are working (learning how to build supports is extremely important so do some research)! Buyer beware. Not sure wth is up with AnyCubic but I'm calling you out. Fix your stuff. Uneven build plates, LCDs that fail after one print

 Fix your stuff. Uneven build plates, LCDs that fail after one print..not acceptable!!! Thank goodness I was able to return this and buy something else

 But what does that mean and how do I do it? Well, it all starts with a level build plate. If the surface you're wanting this to stick to is unlevel, the resin won't adhere to it and it will immediately fail. As I gained knowledge in wth was going on, I ran a straight metal ruler over the build plate. And guess what, warped as all heck

Please do not buy

notebookcheck.net

shopify

Simons Shed

The 3D Print General

 As I said, no SD card but that's not actually a problem because you simply go onto the app store, download the Creality Cloud app and sign up there and you can actually connect it to the printer and just send slices up to the cloud and just go onto the app and press print from there. So you don't actually have to mess around with plugging in USB sticks and SD cards and so on and transferring files and then unplug it, take it to the printer, plug it in, you don't have to bother with any of that. You can actually slice files on the computer and send them up to the cloud and they will then appear in the app and you just press print from there. Very predictable, I'm sorry this was the first thing I printed but yeah it's what everybody does isn't it? The benchy sort of test print, give it a good test and yeah that's working away there very well

 I've cut a little bit out there just so you don't have to watch it heat up, but you can see the filament comes out and you press okay. Now the bed is already levelled, so there's no bed levelling required at this stage, it's done at the factory. But while we're here, let's talk about the screen, 4.3 inch screen, very clear and you can see information along the bottom there about the bed temperature and the nozzle temperature and all the menus are very self-explanatory really, you've got different modes, you've got set up so you can turn the lights and fan off

Creality Sermoon V1 Pro unboxing this new 3D printer!

 Hello there, welcome back to Simon Shedd, it's time for another look at a 3D printer.

 I was kindly sent this printer by Creality to take a look at.

 It's the Sermoon V1 Pro and it's a FDM printer, something I know nothing about because I've

 So this is going to be a really good test of beginner set it up and use it because all

 my experience so far has been with resin printing whereas this is an FDM printer.

 So they sent it over and said take a look, so be rude not to.

 And what we've got is this, the Sermoon V1 Pro.

 I didn't realise until I saw the box that Create Reality is where Creality comes from,

 But let's not mess about, let's get the box open straight away and first things first,

 So we've got a pack of instructions, sort of quick start guide and they send some filament,

 some PLA, obviously a plug, and a toolkit and spare parts, so we've got a spare nozzle

 in there and some tools for future use and the ever handy snippers there, very useful

 for cutting off supports and snipping the filament.

 And you'll notice that we don't have an SD card.

 We do have links to an app, so that's interesting.

 More on that later, but we'll get it out of the bag and you'll notice straight away that

 So most importantly, let's see what Fern the dog thinks.

 And as part of the unpackaging, we have to enjoy peeling off the films, very satisfying.

 So yeah, as I say, there's no building to do, just remove this bit of packaging here

 and there's a few cable ties to snip, be very careful because those are next to some belts.

 So yeah, carefully snip those, remove the bits of packaging and that's kind of it, switch

 So you snip the filament, the end of the filament at an angle.

 I did wonder what this was for, but yeah, it's to hang your reel on for the filament,

 All very simple really, so it goes down that tube and then you have to go into the menu

 and tap on feed and once you've fed it in as it's shown, you just press okay and wait

 for it to come through the nozzle, it starts heating up the nozzle.

 I've cut a little bit out there just so you don't have to watch it heat up, but you can

 see the filament comes out and you press okay.

 Now the bed is already levelled, so there's no bed levelling required at this stage, it's

 But while we're here, let's talk about the screen, 4.3 inch screen, very clear and you

 can see information along the bottom there about the bed temperature and the nozzle temperature

 and all the menus are very self-explanatory really, you've got different modes, you've

 got set up so you can turn the lights and fan off.

 You can level the bed if it's gone out of alignment after a lot of use, but yeah I really

 like the screen, nice and clear and there's all the information on the printer.

 But watch how responsive it is, no lag at all and yeah very impressed with the, you

 only have to touch the screen lightly, so very impressed with that.

 As I said, no SD card but that's not actually a problem because you simply go onto the app

 store, download the Creality Cloud app and sign up there and you can actually connect

 it to the printer and just send slices up to the cloud and just go onto the app and

Anycubic Photon Mono X vs Creality Sermoon V1 Pro

Reviews by Topic

Reliability

Ease Of Use

QUICK QUESTION!

You might also like