Hiking Boots/Shoes Recommendations?

Hiking boot recommendations?

Any recommendations for women's hiking shoes?

[Request] Hiking/outdoorsy style shoes that can handle lots of walking on concrete

Cold and wet weather hiking boots recommendations?

I am in need of a new pair of trail/hiking boots.

Hiking Boots for heavy use during the summer

Good pair of hiking shoes?

[Request] waterproof hiking shoes

[request] - Good quality walking shoes.

Hello Redditors. I'm in search of a classy yet extremely durable pair of hiking boots to take backpacking around the world for 12+ months with.

Hiking boots recommendations

Men's three season "urban hiker" (like Merrell MOAB but longer lasting)

BIFL Hiking boots for women

Hiking boots with good traction and can stand up to abuse.

Looking for a good pair of shoes for my weird feet

Request - Hiking Sandals

Request: Hiking Boots

Comfortable and cushiony shoes for walking on pavement 10KM/couple hours a day (UK)

Hiking sandals that last?

[Request] Powerful dishwasher with sanitize function?

I want the best god damned dishwasher money can buy.

Looking for the best, easiest to operate, cheapest dishwasher - Recommendation?

[Request] Best countertop dishwasher for reasonable price?

Can anyone recommend a good dishwasher?

Countertop/Portable Dishwasher

[Request] Dishwasher &lt;$1k Australian with QOL features and low water use

Dishwasher for Second Home

My friend bought a house with this KichenAid dishwasher from 1974. He says it works better than any of the other ones he has owned. He just has to convince his wife not to replace it.

What's a good Panel ready dishwasher under $1k?

Best socket set on the market $100-$150

[Request] Socket wrenches

I need a recommendation for a tool set that should last a lifetime. [Request]

Looking for a Mechanics tool set.

23 years later; GM Goodwrench socket set.

A Starter/Lifetime Tool set

Basic screwdriver set needed

Mechanic Tools that are BIFL

Trying to fill a tool roll for my truck and would like input on BFL tools like wrenches, pliers, socket sets, etc.

BIFL: Mastercraft ratchet set with lifetime warranty. Got it at 14, im 31. Went thru more abuse than you think!

Looking to upgrade my home hand tools

Was told to post this here. Husky 270pc toolset from Home Depot for $99, normally $199. Lifetime warranty too

[Request] Ratchet/Wrench/Etc tool set for home/bicycle/general use

Thoughts on a Honda Accord V6 2007?

2010 Honda Accord worth the buy?

Thoughts on a 2008 Honda accord v6 coupe EX-L?

2014 honda accord ??

After an initial round of research it seems like Honda Accord Hybrid is the right answer, but I want to pressure test that with you guys

2014 Accord V6 Touring (any thoughts?)

Which car ?

me again. 2010 2dr honda accord, 122k miles for $5,800. just want a reliable first car, thoughts?

Want to buy an Accord, any suggestions?

2020/2021 Honda Accord LX - Tell Me About Your Likes/Dislikes

Compact - Midsize suv

best small/midsize suv?

Looking for a used (06-14) reliable compact/mid-size SUV

compact/mid size suv

Midsize SUV

Recommendations for midsized SUVs to look at

Compact to Mid-Size SUV

Small to mid-size suv suggestions?

Midsize vehicle for three kids

Mid-Size SUV

Just tried a Lotus Elise Cup 250, driving impressions !

Dan Neil reviews Lotus Emira: As Good As It Gets

Considering a Lotus Elise - USA

How affordable are Lotus Elises from the 2005-2012 model year?

Lotus Exige Sport Final Edition review: farewell, Exige

I wanna know everything you know about a 2005 Lotus Elise

My Lotus Evora Review

Lotus retail sales up 24% in best performance for a decade

2022 Lotus Emira Looks to Be One of the Brand's Best

PURCHASING A LOTUS — Need Tips + Advice.

Looking for a good rpg/action adventure with a good story and good characters

Deep long rpgs?

Looking for a story-focused RPG

Looking for a complex RPG

Fantasy games with an detailed and immersive world?

[WSIB] I am in search for a open world RPG that will keep me busy for hundreds of hours.

Open world game with huge map, lots of things to do, and great graphics

WSIB Feeling a bit of an rpg lull and want something exciting like old school BioWare with a engaging story that doesn’t take 100 hours to play.

WSIB: long, immersive games with high quality storytelling and writing

looking for an open-world rpg

[WSIB] A turn based strategy game that isn’t 4X

Turn-based strategy game

Turn-based strategy games

[WSIB] Small-scale, medieval, strategy game, featuring pikemen and cavalry

(WSIB) Turn-based ”wargaming” game

[WSIB] Turn Based Strategy games

WSIB if I want a strategy game for dummies

WSIB Strategic Rpg

[WSIB] Good offline strategy/(ish) games?

What are some good "smaller scale to control, but still feel large scale battle" tactical / strategy games?

Bullet Hell-Type Games: Atomicrops vs. I, Dracula: Genesis vs. Others?

WSIB if i want a completely story driven indie game but have already played undertale and oneshot (preferably similar to those 2)

Post apocalyptic enthusiast, Underrail or Atom RPG?

[SIB] Undermine or Atomicrops

WSIB if I like "Run into things, need to grow in power/special items to move further so I come back after unlocking said element" type of games.

Blsoodborne or Resident evil 2 ?

What should I buy? Animal Crossing: New Horizons or Doom: Eternal

[WSIB] Fast-paced top-down roguelikes?

[SIB] I Hate Running Backwards or Planetary Dustoff? Or something else?

SIB Nuclear Throne?

What can you recommend for minimizing pores?

I know you can’t get rid of pores but I’m wondering is there anyway to make them smaller? I use La Roche Posay products. They keep my acne mostly at bay but I feel like my pores are just so large. Part of it is genetic, but just wondering if there’s anything else I can do at home to help. Thanks!

OPEN PORES- WHAT TO DO? IS THERE ANY PRODUCT I CAN USE?

What skincare products have you used that helped with large pores?

What is the best thing to use to tighten pores on your face?

Can anyone tell me why my pores are so huge and what I can do to minimize them?

How to reduce pores.

Hey guys, how do I make my pores not look like this? Info in comments (deleted and reposted for an error in the title)

Pores reduction tips?

Advice for shrinking pores on and around nose?

[sun care] sunscreen that doesn’t irritate rosacea and perioral dermatitis

[Sun Care] Looking for sunscreen that doesn't irritate Rosacea

Sunscreen recommendations for rosacea

Looking for a sunscreen for my acne prone skin.

[Sun Care] looking for a sunscreen that works well for people with Eczema.

Desperate for a good sunscreen

Looking for a Daily Suncreen

I’ve tried them all and I still can’t find my holy grail for my dry rosacea skin. Any other recommendations?

Sunscreen, eczema and makeup, Help [Sun care]

[Sun Care] Help with not being able to use Sunscreen

How can i stop a really greasy face?

How to best defeat oily skin?

Is there any long-lasting solution for oily face?

Oily Face -&gt; Wash Face -&gt; More Oily

Extremely oily skin

Y’all know some sort of cream or product I can buy to make my face less greasy looking?

super oily face help needed

Oily Skin— please help!

Really oily skin

How to have less oily skin?

Adrian Krebs

Johannes Engler

Tavis Lochhead

amazon.com

 We're hobbyists though, and can't justify spending thousands for something we may never use after setting it up. That curiosity "itch" never went away, so you watch prices for it to come down go a reasonable price range..

 The other style of printer does provide higher quality, but at the cost of requiring hazardous chemicals in the creation process. With the purchase of the Vyper 3d printer, it came with the test file to create the owl seen here. 4 Stars! Hope you find this review and pictures helpful! Reasonably priced and easy for newbies!

 4 Stars! Hope you find this review and pictures helpful! Reasonably priced and easy for newbies!

Perfect for Newbies! Easy to Use!

 It probably took me a half hour because I was taking my time and really going through the parts while I put it together. A beginner could build this with no issues (but do watch the video on their site).  Price: There are better printers out there. But I doubt there are better printers at this price point

  Speed: The "Benchy" printed above was completed in an hour. And with no real tuning except for messing with settings in the slicing software and completing the auto-level. It appears at a glance that I can get quality superior to my Ender 3 in a lot less time.  Build Quality: While I am aware that there have been some issues with the initial beta batch of printers, this one came together really nicely and has very little vibration while printing

 The improvements they have made are minimal, but it's a solid design that requires a lot less customization than my Ender 3 where I spent days printing upgrades before it was ready to use.  Ease of Assembly: This was so easy to build. Like seriously easy. And the instructions on their site are very easy to follow

  I think it is worthwhile to point out some of the really nice features they have integrated into a model at this price point:  Magenetic Build Plate is so much easier to use than my old glass plate and clips solution. Dual Z rods really seem to be stable. Belt tightening built in (I think this was my biggest ongoing issue) with my Ender 3. The easy feed for the extruder

Perfect Starter 3D Printer

Ordered two. Only one arrived after two weeks. Okay quality but paid for two and only received one after weeks of waiting. Can't cancel or reorder the the second one

 Okay quality but paid for two and only received one after weeks of waiting. Can't cancel or reorder the the second one.

Ordered two. Only one arrived after two weeks. Okay quality but paid for two and recieved only one.

 However, the Magnetic spring steel build plate will not hold the base of the model and you have a mess of stranded plastic on the bed (see Pic). Even after wiping it down with alcohol to get the hand oils off after scraping the plastic that is left behind with the included scraper. Now i have to use glue stick to ensure the base of the model sticks. The build plate my option has failed in 3 weeks!

Great Printer Except....

notebookcheck.net

techradar.com

Just Vlad

r/3Dprinting

r/prusa3d

Now you may have done this already, so this next part might be key for you, as it was for me. As the print starts extruding the purge line, and then the skirt/brim, look really really close at the filament being laid down. If it isn’t sticking at all right away, nozzle is almost definitely too far from the bed. If it’s sticking but not well, still probably too far

I have gone through an entire fucking roll of filament trying to troubleshoot this god damn printer (Creality CP-01). I have used various types of glue, heated the glass bed, used masking tape, slowed down the print speed, sped up the print speed, switched filament types, preheated my filament, dried out the filament, resealed it in bags when not in use, roughed up the build plate with \*super\* fine sandpaper, changed the infill percentage, changed slicing software - NOTHING has \*\*fucking\*\* worked, and I am \*super\* close to just throwing my shitty printer out into the trash so it can actually do something productive other than take up space in my garage and print spaghetti.

&amp;#x200B;

Any advice? Do I need an enclosure? I live in Nevada, there is literally \*\*no\*\* moisture present.

<div class="md">I have gone through an entire fucking roll of filament trying to troubleshoot this god damn printer (Creality CP-01). I have used various types of glue, heated the glass bed, used masking tape, slowed down the print speed, sped up the print speed, switched filament types, preheated my filament, dried out the filament, resealed it in bags when not in use, roughed up the build plate with *super* fine sandpaper, changed the infill percentage, changed slicing software - NOTHING has **fucking** worked, and I am *super* close to just throwing my shitty printer out into the trash so it can actually do something productive other than take up space in my garage and print spaghetti.

&#x200B;

Any advice? Do I need an enclosure? I live in Nevada, there is literally **no** moisture present.
</div>

My God Damn Print Won't Stay Stuck to the Fucking Build Plate

 It'S still quite easy to turn, and this is where you want, because we want a really smooth motion. So, for the last few things all we need to do is plug in some connectors and there's actually only a few there's these two stepper motors. So quite simple. One here and then one on this side and then we have a large main wire and it has two plugs on it

 So it is smart enough to know not to put a hot nozzle into the bed. I'M really happy to see that kind of attention to detail all right. So it is 117 temperature and it's starting to go okay, so it actually touches the bed and takes its measurement like that really cool thinking about this guys. This might be the best way to do this, because not only will it be always accurate, since it's the nozzle, there should be a lot less issues with this kind of level

 So quite simple. One here and then one on this side and then we have a large main wire and it has two plugs on it. There'S one about halfway and that one will go right here and that's a junction box where everything is distributed to the end, stop switches and the motors so that'll plug in right here. Just like that, and the other end goes to the hot end, which is here right on top, you can see, there's a plug and that just simply plugs right into there

 Now you might want to go ahead and go around the printer and check all the bolts, because they do tighten them up really good at the factory, but over time, and also temperature changes can loosen them up a bit. So checking them is always a good idea. Make sure they're, nice and snug, so one of these was quite loose yeah this one's very loose, so there's four more on the other side, and these are very tight. So that's good! Now there are some more bolts that are underneath, and these are quite important if these are loose, the y axis can wobble back and forth so definitely check these underneath and make sure they're, nice and snug

Creality CR-6 SE - 3D Printer - Unbox & Setup

 The Prusa i3 mk3s+ doesn't interest me much because of the cost relative to features though I had looked into it. I had also considered a Voron kit but it's more work than I want to take on and I dislike the idea of having to run dual motherboards. 

Welcome back to another purchase megathread!

For a link to last month's post, see [here](https://www.reddit.com/r/3Dprinting/comments/ovry51/purchase_advice_megathread_what_to_buy_who_to_buy/). Top comment was [/u/Sausage54](https://www.reddit.com/u/Sausage54/)'s 2021 Printer list [here](https://www.reddit.com/r/3Dprinting/comments/ovry51/purchase_advice_megathread_what_to_buy_who_to_buy/h7b6sdc).

This thread is meant to conglomerate purchase advice for both newcomers and people looking for additional machines. Keeping this discussion to one thread means less searching should anyone have questions that may already have been answered here, as well as more visibility to inquiries in general, as comments made here will be visible for the entire month stuck to the top of the sub, and then linked to in the next month's thread.

If you are new to 3D printing, and are unsure of what to ask, try to include the following in your posts as a minimum:

* Your budget, set at a numeric amount. Saying "cheap," or "money is not a problem" is not an answer people can do much with. 3D printers can cost $100, they can cost $10,000,000, and anywhere in between. A rough idea of what you're looking for is essential to figuring out anything else.
* Your country of residence.
* If you are willing to build the printer from a kit, and what your level of experience is with electronic maintenance and construction if so.
* What you wish to do with the printer.
* Any extenuating circumstances that would restrict you from using machines that would otherwise fit your needs (limited space for the printer, enclosure requirement, must be purchased through educational intermediary, etc).

While this is by no means an exhaustive list of what can be included in your posts, these questions should help paint enough of a picture to get started. Don't be afraid to ask more questions, and never worry about asking too many. The people posting in this thread are here because they want to give advice, and any questions you have answered may be useful to others later on, when they read through this thread looking for answers of their own. Everyone here was new once, so chances are whoever is replying to you has a good idea of how you feel currently.

Additionally, a quick word on print quality: Most FDM/FFF (that is, filament based) printers are capable of approximately the same tolerances and print appearance, as the biggest limiting factor is in the nature of extruded plastic. **Asking if a machine has "good prints," or saying "I don't expect the best quality for $xxx" isn't actually relevant for the most part** with regards to these machines. Should you need additional detail and higher tolerances, you may want to explore SLA, DLP, and other photoresin options, as those *do* offer an increase in overall quality. If you are interested in resin machines, make sure you are aware of [how to use them safely](https://www.reddit.com/r/3DPrinting/wiki/resinprinting#wiki_safety). For these safety reasons we don't usually recommend a resin printer as someone's first printer.

As always, if you're a newcomer to this community, welcome. If you're a regular, welcome back.

<div class="md">Welcome back to another purchase megathread!

For a link to last month&#39;s post, see <a href="https://www.reddit.com/r/3Dprinting/comments/ovry51/purchase_advice_megathread_what_to_buy_who_to_buy/">here</a>. Top comment was <a href="https://www.reddit.com/u/Sausage54/">/u/Sausage54</a>&#39;s 2021 Printer list <a href="https://www.reddit.com/r/3Dprinting/comments/ovry51/purchase_advice_megathread_what_to_buy_who_to_buy/h7b6sdc">here</a>.

Announcement: <a href="/r/gadgets">r/gadgets</a> has partnered with <a href="/r/Revopoint">r/Revopoint</a> to giveaway a 3D scanner.

Check out <a href="https://www.reddit.com/r/gadgets/comments/ppfyag/revopoint_pop_3d_scanner_giveaway/">their post</a> more information and how to enter.

This thread is meant to conglomerate purchase advice for both newcomers and people looking for additional machines. Keeping this discussion to one thread means less searching should anyone have questions that may already have been answered here, as well as more visibility to inquiries in general, as comments made here will be visible for the entire month stuck to the top of the sub, and then linked to in the next month&#39;s thread.

If you are new to 3D printing, and are unsure of what to ask, try to include the following in your posts as a minimum:

<ul>
<li>Your budget, set at a numeric amount. Saying &quot;cheap,&quot; or &quot;money is not a problem&quot; is not an answer people can do much with. 3D printers can cost $100, they can cost $10,000,000, and anywhere in between. A rough idea of what you&#39;re looking for is essential to figuring out anything else.</li>
<li>Your country of residence.</li>
<li>If you are willing to build the printer from a kit, and what your level of experience is with electronic maintenance and construction if so.</li>
<li>What you wish to do with the printer.</li>
<li>Any extenuating circumstances that would restrict you from using machines that would otherwise fit your needs (limited space for the printer, enclosure requirement, must be purchased through educational intermediary, etc).</li>
</ul>

While this is by no means an exhaustive list of what can be included in your posts, these questions should help paint enough of a picture to get started. Don&#39;t be afraid to ask more questions, and never worry about asking too many. The people posting in this thread are here because they want to give advice, and any questions you have answered may be useful to others later on, when they read through this thread looking for answers of their own. Everyone here was new once, so chances are whoever is replying to you has a good idea of how you feel currently.

Additionally, a quick word on print quality: Most FDM/FFF (that is, filament based) printers are capable of approximately the same tolerances and print appearance, as the biggest limiting factor is in the nature of extruded plastic. Asking if a machine has &quot;good prints,&quot; or saying &quot;I don&#39;t expect the best quality for $xxx&quot; isn&#39;t actually relevant for the most part with regards to these machines. Should you need additional detail and higher tolerances, you may want to explore SLA, DLP, and other photoresin options, as those do offer an increase in overall quality. If you are interested in resin machines, make sure you are aware of <a href="https://www.reddit.com/r/3DPrinting/wiki/resinprinting#wiki_safety">how to use them safely</a>. For these safety reasons we don&#39;t usually recommend a resin printer as someone&#39;s first printer.

As always, if you&#39;re a newcomer to this community, welcome. If you&#39;re a regular, welcome back.
</div>

Purchase Advice Megathread: What To Buy, Who To Buy It From, And More, In September 2021

shopify

Anycubic Kobra Plus vs Creality CR-6 SE

QUICK QUESTION!

You might also like