Hiking Boots/Shoes Recommendations?

Hiking boot recommendations?

Any recommendations for women's hiking shoes?

[Request] Hiking/outdoorsy style shoes that can handle lots of walking on concrete

Cold and wet weather hiking boots recommendations?

I am in need of a new pair of trail/hiking boots.

Hiking Boots for heavy use during the summer

Good pair of hiking shoes?

[Request] waterproof hiking shoes

[request] - Good quality walking shoes.

Hello Redditors. I'm in search of a classy yet extremely durable pair of hiking boots to take backpacking around the world for 12+ months with.

Hiking boots recommendations

Men's three season "urban hiker" (like Merrell MOAB but longer lasting)

BIFL Hiking boots for women

Hiking boots with good traction and can stand up to abuse.

Looking for a good pair of shoes for my weird feet

Request - Hiking Sandals

Request: Hiking Boots

Comfortable and cushiony shoes for walking on pavement 10KM/couple hours a day (UK)

Hiking sandals that last?

[Request] Powerful dishwasher with sanitize function?

I want the best god damned dishwasher money can buy.

Looking for the best, easiest to operate, cheapest dishwasher - Recommendation?

[Request] Best countertop dishwasher for reasonable price?

Can anyone recommend a good dishwasher?

Countertop/Portable Dishwasher

[Request] Dishwasher &lt;$1k Australian with QOL features and low water use

Dishwasher for Second Home

My friend bought a house with this KichenAid dishwasher from 1974. He says it works better than any of the other ones he has owned. He just has to convince his wife not to replace it.

What's a good Panel ready dishwasher under $1k?

Best socket set on the market $100-$150

[Request] Socket wrenches

I need a recommendation for a tool set that should last a lifetime. [Request]

Looking for a Mechanics tool set.

23 years later; GM Goodwrench socket set.

A Starter/Lifetime Tool set

Basic screwdriver set needed

Mechanic Tools that are BIFL

Trying to fill a tool roll for my truck and would like input on BFL tools like wrenches, pliers, socket sets, etc.

BIFL: Mastercraft ratchet set with lifetime warranty. Got it at 14, im 31. Went thru more abuse than you think!

Looking to upgrade my home hand tools

Was told to post this here. Husky 270pc toolset from Home Depot for $99, normally $199. Lifetime warranty too

[Request] Ratchet/Wrench/Etc tool set for home/bicycle/general use

Thoughts on a Honda Accord V6 2007?

2010 Honda Accord worth the buy?

Thoughts on a 2008 Honda accord v6 coupe EX-L?

2014 honda accord ??

After an initial round of research it seems like Honda Accord Hybrid is the right answer, but I want to pressure test that with you guys

2014 Accord V6 Touring (any thoughts?)

Which car ?

me again. 2010 2dr honda accord, 122k miles for $5,800. just want a reliable first car, thoughts?

Want to buy an Accord, any suggestions?

2020/2021 Honda Accord LX - Tell Me About Your Likes/Dislikes

Compact - Midsize suv

best small/midsize suv?

Looking for a used (06-14) reliable compact/mid-size SUV

compact/mid size suv

Midsize SUV

Recommendations for midsized SUVs to look at

Compact to Mid-Size SUV

Small to mid-size suv suggestions?

Midsize vehicle for three kids

Mid-Size SUV

Just tried a Lotus Elise Cup 250, driving impressions !

Dan Neil reviews Lotus Emira: As Good As It Gets

Considering a Lotus Elise - USA

How affordable are Lotus Elises from the 2005-2012 model year?

Lotus Exige Sport Final Edition review: farewell, Exige

I wanna know everything you know about a 2005 Lotus Elise

My Lotus Evora Review

Lotus retail sales up 24% in best performance for a decade

2022 Lotus Emira Looks to Be One of the Brand's Best

PURCHASING A LOTUS — Need Tips + Advice.

Looking for a good rpg/action adventure with a good story and good characters

Deep long rpgs?

Looking for a story-focused RPG

Looking for a complex RPG

Fantasy games with an detailed and immersive world?

[WSIB] I am in search for a open world RPG that will keep me busy for hundreds of hours.

Open world game with huge map, lots of things to do, and great graphics

WSIB Feeling a bit of an rpg lull and want something exciting like old school BioWare with a engaging story that doesn’t take 100 hours to play.

WSIB: long, immersive games with high quality storytelling and writing

looking for an open-world rpg

[WSIB] A turn based strategy game that isn’t 4X

Turn-based strategy game

Turn-based strategy games

[WSIB] Small-scale, medieval, strategy game, featuring pikemen and cavalry

(WSIB) Turn-based ”wargaming” game

[WSIB] Turn Based Strategy games

WSIB if I want a strategy game for dummies

WSIB Strategic Rpg

[WSIB] Good offline strategy/(ish) games?

What are some good "smaller scale to control, but still feel large scale battle" tactical / strategy games?

Bullet Hell-Type Games: Atomicrops vs. I, Dracula: Genesis vs. Others?

WSIB if i want a completely story driven indie game but have already played undertale and oneshot (preferably similar to those 2)

Post apocalyptic enthusiast, Underrail or Atom RPG?

[SIB] Undermine or Atomicrops

WSIB if I like "Run into things, need to grow in power/special items to move further so I come back after unlocking said element" type of games.

Blsoodborne or Resident evil 2 ?

What should I buy? Animal Crossing: New Horizons or Doom: Eternal

[WSIB] Fast-paced top-down roguelikes?

[SIB] I Hate Running Backwards or Planetary Dustoff? Or something else?

SIB Nuclear Throne?

What can you recommend for minimizing pores?

I know you can’t get rid of pores but I’m wondering is there anyway to make them smaller? I use La Roche Posay products. They keep my acne mostly at bay but I feel like my pores are just so large. Part of it is genetic, but just wondering if there’s anything else I can do at home to help. Thanks!

OPEN PORES- WHAT TO DO? IS THERE ANY PRODUCT I CAN USE?

What skincare products have you used that helped with large pores?

What is the best thing to use to tighten pores on your face?

Can anyone tell me why my pores are so huge and what I can do to minimize them?

How to reduce pores.

Hey guys, how do I make my pores not look like this? Info in comments (deleted and reposted for an error in the title)

Pores reduction tips?

Advice for shrinking pores on and around nose?

[sun care] sunscreen that doesn’t irritate rosacea and perioral dermatitis

[Sun Care] Looking for sunscreen that doesn't irritate Rosacea

Sunscreen recommendations for rosacea

Looking for a sunscreen for my acne prone skin.

[Sun Care] looking for a sunscreen that works well for people with Eczema.

Desperate for a good sunscreen

Looking for a Daily Suncreen

I’ve tried them all and I still can’t find my holy grail for my dry rosacea skin. Any other recommendations?

Sunscreen, eczema and makeup, Help [Sun care]

[Sun Care] Help with not being able to use Sunscreen

How can i stop a really greasy face?

How to best defeat oily skin?

Is there any long-lasting solution for oily face?

Oily Face -&gt; Wash Face -&gt; More Oily

Extremely oily skin

Y’all know some sort of cream or product I can buy to make my face less greasy looking?

super oily face help needed

Oily Skin— please help!

Really oily skin

How to have less oily skin?

Adrian Krebs

Johannes Engler

Tavis Lochhead

Basic Breakdown The Anet A8 is a useful yet affordable 3D printer, for beginners and enthusiasts alike With its capable extruder and hot bed, the A8 is able to print a variety of filaments The A8 is built intuitively with a slick user interface Comes unassembled with video instructions Detailed Overview A solid and capable Prusa i3 variant, the Anet A8 is an extremely popular model. It has a large customer base and lots of available customisation to kick start your 3D experience. The A8’s affordable price tag makes it a favorite among consumers, but that doesn’t mean that this printer isn’t a 3D printing powerhouse. It boasts a large print area and very capable NEMA17 motors to navigate the print space. The A8 comes stock with a versatile extruder and heated bed, which makes it capable of printing a diverse selection of filaments. The printer was designed with the user in mind. Part placement is intuitive and straightforward, and the board comes prelabelled with all you’ll need to know. The firmware provides an interface that is easy to navigate. As always, this printer can be controlled using RepetierHost or independently using a GCODE file and a microUSB card. Technical Specifications Frame Material: Acrylic or Aluminum Composite (Aluminum surface with plastic structure) XY Axis Accuracy: 0.012mm Z Axis Accuracy: 0.004mm Number of Extruders: 1 Extruder Diameter: 0.4mm Max Print Speed: 100mm/s Max Print Size: 220x220x240mm Nozzle Temp.: Adjustable, Maximum 250C Hot Bed Temperature: 50 to 100C Heating Plate Material: Aluminum Printable Materials: PLA, ABS, TPU, Wood Poly, PVA, PP, Nylon, Luminescent Filament Diameter: 1.75mm Data Input: microSD or USB

amazon.com

Embrace Making

r/3Dprinting

r/Tools

r/prusa3d

 Of course that's possible. But again if the first layer goes down smooth and your print bed is nice and level there's good layer. Adhesion then you're setting yourself up for a high chance of success with the rest of your print, and so i was happy to see again that this first layer went down really smooth. I think that speaks to the flatness of the build plate and i took some care in leveling it and i took a lot of care in setting the printer up, making sure everything was square, making sure all the extrusions were square to one another

 And so you know, you're gon na get out what you sort of put into these kits, despite it being a very low cost, even in some cases par in some parts, low quality. If you really take the time to do a proper setup, you're setting yourself up for a much greater chance of success on your prints, even on these cheap machines, after that first successful print, i went on to print many more parts and at the time of editing, This video i've gone through about two rolls of filament at this point and have yet to had a failed print and, to me, that's very surprising, considering the cost of this machine and, quite frankly, the quality of some of these parts. So i'm amazed that it works as well as it does and i'll admit that i haven't even been bothered to go back and change the retraction settings on the printer profile that i'm using so i'm still using the et5x profile with much more retraction than this printer. Should be seeing - and this is what i thought would likely lead to a hot end jam, because it's going to retract too much filament into the heat break and then cause a jam

 Adhesion then you're setting yourself up for a high chance of success with the rest of your print, and so i was happy to see again that this first layer went down really smooth. I think that speaks to the flatness of the build plate and i took some care in leveling it and i took a lot of care in setting the printer up, making sure everything was square, making sure all the extrusions were square to one another. And so you know, you're gon na get out what you sort of put into these kits, despite it being a very low cost, even in some cases par in some parts, low quality. If you really take the time to do a proper setup, you're setting yourself up for a much greater chance of success on your prints, even on these cheap machines, after that first successful print, i went on to print many more parts and at the time of editing, This video i've gone through about two rolls of filament at this point and have yet to had a failed print and, to me, that's very surprising, considering the cost of this machine and, quite frankly, the quality of some of these parts

ANET A8 Plus Assembly Guide, Setup, Review, Easy Upgrades (STLs Included). Is This Printer Worth It?

shopify

3BA Printing

Out of The Box Reviews

DIY Engineering

r/headphones

I also see a lot of people reccomend the Prusia mk3s. OP, these are great printers but I want you to understand what you are paying for when you buy the printer. The I3 (bedflinger) design is one of the cheapest designs on the market and a Prusia mk3s probably costs about $500-$600 (US) in parts but the rest of the cost is people checking all the electrical components to see if they function properly, research and development into new iterations and for extensive, high quality customer support. If you buy the prebuilt then you will also be paying for someone to put the printer together and run a ~2 hour test print to make sure the thing works

I repair old electronics for fun, but I find broken parts often. I'd like to know a material type and printer that could print strong replacements pieces. For example, I have a Dreamcast controller with two broken triggers, if I could print replacements, that would be awesome.

Thank you.

<div class="md">I repair old electronics for fun, but I find broken parts often. I&#39;d like to know a material type and printer that could print strong replacements pieces. For example, I have a Dreamcast controller with two broken triggers, if I could print replacements, that would be awesome.

Thank you.

-Edit-

Wife said up to $2,000 AUD ($1,400 USD), which seems a bit much considering how awesome some of those cheaper printers look.

Maybe $1,000 USD all up printer, tax, shipping, materials, and some cool designs. Some of the models people have printed look as good as shop stuff, I&#39;m excited.
</div>

Wife just said "Get yourself a 3D printer for Christmas", I'm so excited, watching YouTube videos but I know nothing.

 I have been using this machine a lot for nearly two weeks now and I'm very happy with it.  Details:  I needed a 3D printer not as a hobby, but because I need to prototype enclosures for electronic devices. As such, I wanted something reliable, that would work right out of the box with minimal fussing. I also wanted to be able to print using ABS and be able to print supports with soluble material

 As such, I wanted something reliable, that would work right out of the box with minimal fussing. I also wanted to be able to print using ABS and be able to print supports with soluble material. Of course I didn't want to spend thousands. This printer is fully enclosed (helpful for ABS) and dual extruder for well under $1,000

 Of course I didn't want to spend thousands. This printer is fully enclosed (helpful for ABS) and dual extruder for well under $1,000. It arrived very well packaged with an excellent getting started guide (I recommend you read it and follow the directions - the english is excellent, no decryption required). It's sturdy and solid

Great printer with excellent support from the seller!

 I really wanted to like this printer but for the price, its just not worth it. You can get more functionality from a Chinese cloned printer that costs less than half the price of the creator pro.

 Also manual bed leveling with no option to upgrade to an automatic bed leveling system (refer to crap 8-bit board). I ended up returning it. I really wanted to like this printer but for the price, its just not worth it. You can get more functionality from a Chinese cloned printer that costs less than half the price of the creator pro

I really wanted to like this printer..

 I'm struggling to learn Cura for the BIBO and Sindoh's slicer was easy to pick up.  In terms of operational reliability, the Sindoh WAS at the top of my list before it broke itself. This Creator Pro is second on the list. I haven't had the BIBO for very long so it still gets babysat closely

 The included plate stickers work well, I haven't had any issues with prints not sticking or sticking too well to them.  Since this utilizes Flashprint slicer, I picked that right up since the Finder utilizes that slicer. I'm struggling to learn Cura for the BIBO and Sindoh's slicer was easy to pick up.  In terms of operational reliability, the Sindoh WAS at the top of my list before it broke itself

 If I step outside of the studio room, I can easily hear the Creator Pro, and faintly hear the BIBO. If I go upstairs, I can't hear the BIBO, but the Creator Pro's noises can faintly be heard through the HVAC vents. You won't notice it if there's white noise upstairs, but if the house is quiet, you'll hear the Creator Pro running no matter where you are in the house.  All said and done though, I don't regret buying this printer and would recommend it to a beginner who knows that 3D printers aren't magic boxes, and even an expert, given the community behind this printer and modifications available for it

Noisy but reliable, 4.4 stars

 11. Try to print things vertically. Vertical printing is always more accuarte. Even if some instruction states to print something flat, always flip it vertically

 The blue stock print surface works great. Don't listen to all the idiot's out there that recomend all kinds of other stuff, glass, PEI, Kapton, etc. The key is keeping your surface clean. Clean with denatured alcohol after each print

Great 3d printer

notebookcheck.net

Anet A8 vs Flashforge Creator Pro

Reviews by Topic

Reliability

QUICK QUESTION!

You might also like