Hiking Boots/Shoes Recommendations?

Hiking boot recommendations?

Any recommendations for women's hiking shoes?

[Request] Hiking/outdoorsy style shoes that can handle lots of walking on concrete

Cold and wet weather hiking boots recommendations?

I am in need of a new pair of trail/hiking boots.

Hiking Boots for heavy use during the summer

Good pair of hiking shoes?

[Request] waterproof hiking shoes

[request] - Good quality walking shoes.

Hello Redditors. I'm in search of a classy yet extremely durable pair of hiking boots to take backpacking around the world for 12+ months with.

Hiking boots recommendations

Men's three season "urban hiker" (like Merrell MOAB but longer lasting)

BIFL Hiking boots for women

Hiking boots with good traction and can stand up to abuse.

Looking for a good pair of shoes for my weird feet

Request - Hiking Sandals

Request: Hiking Boots

Comfortable and cushiony shoes for walking on pavement 10KM/couple hours a day (UK)

Hiking sandals that last?

[Request] Powerful dishwasher with sanitize function?

I want the best god damned dishwasher money can buy.

Looking for the best, easiest to operate, cheapest dishwasher - Recommendation?

[Request] Best countertop dishwasher for reasonable price?

Can anyone recommend a good dishwasher?

Countertop/Portable Dishwasher

[Request] Dishwasher &lt;$1k Australian with QOL features and low water use

Dishwasher for Second Home

My friend bought a house with this KichenAid dishwasher from 1974. He says it works better than any of the other ones he has owned. He just has to convince his wife not to replace it.

What's a good Panel ready dishwasher under $1k?

Best socket set on the market $100-$150

[Request] Socket wrenches

I need a recommendation for a tool set that should last a lifetime. [Request]

Looking for a Mechanics tool set.

23 years later; GM Goodwrench socket set.

A Starter/Lifetime Tool set

Basic screwdriver set needed

Mechanic Tools that are BIFL

Trying to fill a tool roll for my truck and would like input on BFL tools like wrenches, pliers, socket sets, etc.

BIFL: Mastercraft ratchet set with lifetime warranty. Got it at 14, im 31. Went thru more abuse than you think!

Looking to upgrade my home hand tools

Was told to post this here. Husky 270pc toolset from Home Depot for $99, normally $199. Lifetime warranty too

[Request] Ratchet/Wrench/Etc tool set for home/bicycle/general use

Thoughts on a Honda Accord V6 2007?

2010 Honda Accord worth the buy?

Thoughts on a 2008 Honda accord v6 coupe EX-L?

2014 honda accord ??

After an initial round of research it seems like Honda Accord Hybrid is the right answer, but I want to pressure test that with you guys

2014 Accord V6 Touring (any thoughts?)

Which car ?

me again. 2010 2dr honda accord, 122k miles for $5,800. just want a reliable first car, thoughts?

Want to buy an Accord, any suggestions?

2020/2021 Honda Accord LX - Tell Me About Your Likes/Dislikes

Compact - Midsize suv

best small/midsize suv?

Looking for a used (06-14) reliable compact/mid-size SUV

compact/mid size suv

Midsize SUV

Recommendations for midsized SUVs to look at

Compact to Mid-Size SUV

Small to mid-size suv suggestions?

Midsize vehicle for three kids

Mid-Size SUV

Just tried a Lotus Elise Cup 250, driving impressions !

Dan Neil reviews Lotus Emira: As Good As It Gets

Considering a Lotus Elise - USA

How affordable are Lotus Elises from the 2005-2012 model year?

Lotus Exige Sport Final Edition review: farewell, Exige

I wanna know everything you know about a 2005 Lotus Elise

My Lotus Evora Review

Lotus retail sales up 24% in best performance for a decade

2022 Lotus Emira Looks to Be One of the Brand's Best

PURCHASING A LOTUS — Need Tips + Advice.

Looking for a good rpg/action adventure with a good story and good characters

Deep long rpgs?

Looking for a story-focused RPG

Looking for a complex RPG

Fantasy games with an detailed and immersive world?

[WSIB] I am in search for a open world RPG that will keep me busy for hundreds of hours.

Open world game with huge map, lots of things to do, and great graphics

WSIB Feeling a bit of an rpg lull and want something exciting like old school BioWare with a engaging story that doesn’t take 100 hours to play.

WSIB: long, immersive games with high quality storytelling and writing

looking for an open-world rpg

[WSIB] A turn based strategy game that isn’t 4X

Turn-based strategy game

Turn-based strategy games

[WSIB] Small-scale, medieval, strategy game, featuring pikemen and cavalry

(WSIB) Turn-based ”wargaming” game

[WSIB] Turn Based Strategy games

WSIB if I want a strategy game for dummies

WSIB Strategic Rpg

[WSIB] Good offline strategy/(ish) games?

What are some good "smaller scale to control, but still feel large scale battle" tactical / strategy games?

Bullet Hell-Type Games: Atomicrops vs. I, Dracula: Genesis vs. Others?

WSIB if i want a completely story driven indie game but have already played undertale and oneshot (preferably similar to those 2)

Post apocalyptic enthusiast, Underrail or Atom RPG?

[SIB] Undermine or Atomicrops

WSIB if I like "Run into things, need to grow in power/special items to move further so I come back after unlocking said element" type of games.

Blsoodborne or Resident evil 2 ?

What should I buy? Animal Crossing: New Horizons or Doom: Eternal

[WSIB] Fast-paced top-down roguelikes?

[SIB] I Hate Running Backwards or Planetary Dustoff? Or something else?

SIB Nuclear Throne?

What can you recommend for minimizing pores?

I know you can’t get rid of pores but I’m wondering is there anyway to make them smaller? I use La Roche Posay products. They keep my acne mostly at bay but I feel like my pores are just so large. Part of it is genetic, but just wondering if there’s anything else I can do at home to help. Thanks!

OPEN PORES- WHAT TO DO? IS THERE ANY PRODUCT I CAN USE?

What skincare products have you used that helped with large pores?

What is the best thing to use to tighten pores on your face?

Can anyone tell me why my pores are so huge and what I can do to minimize them?

How to reduce pores.

Hey guys, how do I make my pores not look like this? Info in comments (deleted and reposted for an error in the title)

Pores reduction tips?

Advice for shrinking pores on and around nose?

[sun care] sunscreen that doesn’t irritate rosacea and perioral dermatitis

[Sun Care] Looking for sunscreen that doesn't irritate Rosacea

Sunscreen recommendations for rosacea

Looking for a sunscreen for my acne prone skin.

[Sun Care] looking for a sunscreen that works well for people with Eczema.

Desperate for a good sunscreen

Looking for a Daily Suncreen

I’ve tried them all and I still can’t find my holy grail for my dry rosacea skin. Any other recommendations?

Sunscreen, eczema and makeup, Help [Sun care]

[Sun Care] Help with not being able to use Sunscreen

How can i stop a really greasy face?

How to best defeat oily skin?

Is there any long-lasting solution for oily face?

Oily Face -&gt; Wash Face -&gt; More Oily

Extremely oily skin

Y’all know some sort of cream or product I can buy to make my face less greasy looking?

super oily face help needed

Oily Skin— please help!

Really oily skin

How to have less oily skin?

Adrian Krebs

Johannes Engler

Tavis Lochhead

Basic Breakdown The Anet A8 is a useful yet affordable 3D printer, for beginners and enthusiasts alike With its capable extruder and hot bed, the A8 is able to print a variety of filaments The A8 is built intuitively with a slick user interface Comes unassembled with video instructions Detailed Overview A solid and capable Prusa i3 variant, the Anet A8 is an extremely popular model. It has a large customer base and lots of available customisation to kick start your 3D experience. The A8’s affordable price tag makes it a favorite among consumers, but that doesn’t mean that this printer isn’t a 3D printing powerhouse. It boasts a large print area and very capable NEMA17 motors to navigate the print space. The A8 comes stock with a versatile extruder and heated bed, which makes it capable of printing a diverse selection of filaments. The printer was designed with the user in mind. Part placement is intuitive and straightforward, and the board comes prelabelled with all you’ll need to know. The firmware provides an interface that is easy to navigate. As always, this printer can be controlled using RepetierHost or independently using a GCODE file and a microUSB card. Technical Specifications Frame Material: Acrylic or Aluminum Composite (Aluminum surface with plastic structure) XY Axis Accuracy: 0.012mm Z Axis Accuracy: 0.004mm Number of Extruders: 1 Extruder Diameter: 0.4mm Max Print Speed: 100mm/s Max Print Size: 220x220x240mm Nozzle Temp.: Adjustable, Maximum 250C Hot Bed Temperature: 50 to 100C Heating Plate Material: Aluminum Printable Materials: PLA, ABS, TPU, Wood Poly, PVA, PP, Nylon, Luminescent Filament Diameter: 1.75mm Data Input: microSD or USB

amazon.com

Embrace Making

r/3Dprinting

r/Tools

r/prusa3d

 Of course that's possible. But again if the first layer goes down smooth and your print bed is nice and level there's good layer. Adhesion then you're setting yourself up for a high chance of success with the rest of your print, and so i was happy to see again that this first layer went down really smooth. I think that speaks to the flatness of the build plate and i took some care in leveling it and i took a lot of care in setting the printer up, making sure everything was square, making sure all the extrusions were square to one another

 And so you know, you're gon na get out what you sort of put into these kits, despite it being a very low cost, even in some cases par in some parts, low quality. If you really take the time to do a proper setup, you're setting yourself up for a much greater chance of success on your prints, even on these cheap machines, after that first successful print, i went on to print many more parts and at the time of editing, This video i've gone through about two rolls of filament at this point and have yet to had a failed print and, to me, that's very surprising, considering the cost of this machine and, quite frankly, the quality of some of these parts. So i'm amazed that it works as well as it does and i'll admit that i haven't even been bothered to go back and change the retraction settings on the printer profile that i'm using so i'm still using the et5x profile with much more retraction than this printer. Should be seeing - and this is what i thought would likely lead to a hot end jam, because it's going to retract too much filament into the heat break and then cause a jam

 Adhesion then you're setting yourself up for a high chance of success with the rest of your print, and so i was happy to see again that this first layer went down really smooth. I think that speaks to the flatness of the build plate and i took some care in leveling it and i took a lot of care in setting the printer up, making sure everything was square, making sure all the extrusions were square to one another. And so you know, you're gon na get out what you sort of put into these kits, despite it being a very low cost, even in some cases par in some parts, low quality. If you really take the time to do a proper setup, you're setting yourself up for a much greater chance of success on your prints, even on these cheap machines, after that first successful print, i went on to print many more parts and at the time of editing, This video i've gone through about two rolls of filament at this point and have yet to had a failed print and, to me, that's very surprising, considering the cost of this machine and, quite frankly, the quality of some of these parts

ANET A8 Plus Assembly Guide, Setup, Review, Easy Upgrades (STLs Included). Is This Printer Worth It?

shopify

Maker's Muse

Honey Badger 3D Print and Paint

Robert Cowan

Any filament bundled with printers is going to be around 10€/kg in value if you are lucky. Better to buy a fresh roll rather than get confused why old wet filament of the cheapest blend prints like poop and replace your entire extruder trying to diagnose the problem.

Hey guys! 
I am following this community for a while now and I am looking for your help. I would really appreciate it. 

Here is a list of a few printers that I think look pretty good. I just want to know which one is the best or if everyone isn’t the best choice:

- Creality Ender 3 v2 (used): 200€ with extra upgrade extruder 

- Anycubic Mega SE (new): 180€ with 1kg PLA

- Anycubic Mega Zero 2.0 (used): 100€

- Anycubic i3 Mega S (new): 215€ with 1kg PLA

- Anycubic Mega X (new SALE): 240€ with 1kg PLA

- Artillery Genius (used): 200€ with 3kg PLA

- Sovol SV01 (used): 235€ with a few upgrades like


I would really appreciate your help, because I am a little bit lost. This printer would be my first one and I try to pay as less as possible. 
Also I am open for other recommendations:) 
Please let me know if you need any further informations for this offers. (All new Anycubic printer are officially from the Anycubic site with a Valentine’s Day sale)

<div class="md">Hey guys! 
I am following this community for a while now and I am looking for your help. I would really appreciate it. 

Here is a list of a few printers that I think look pretty good. I just want to know which one is the best or if everyone isn’t the best choice:

<ul>
<li>Creality Ender 3 v2 (used): 200€ with extra upgrade extruder </li>
<li>Anycubic Mega SE (new): 180€ with 1kg PLA</li>
<li>Anycubic Mega Zero 2.0 (used): 100€</li>
<li>Anycubic i3 Mega S (new): 215€ with 1kg PLA</li>
<li>Anycubic Mega X (new SALE): 240€ with 1kg PLA</li>
<li>Artillery Genius (used): 200€ with 3kg PLA</li>
<li>Sovol SV01 (used): 235€ with a few upgrades like</li>
</ul>

I would really appreciate your help, because I am a little bit lost. This printer would be my first one and I try to pay as less as possible. 
Also I am open for other recommendations:) 
Please let me know if you need any further informations for this offers. (All new Anycubic printer are officially from the Anycubic site with a Valentine’s Day sale)

EDIT: I am living in Germany
</div>

First Printer for beginner

 But again, that's that's easy enough to do nice, consistent, extrusion, no, real, no, real signs of of anything that needs to be adjusted on the tool head there. I really love these. These are print in place, iris cubes and they are fantastic tolerance tests. So it prints all in one like this, and then you break the tabs at the bottom and then you're able to do this really really nicely done, came out really cool, because this prints like this, it means when it's closed

 Let me be clear: on the channel. We actually have three x ones, we genuinely love them, they've been workhorses, they do really high quality prints and they've been pretty reliable. Um and i you know i've. I'Ve certainly really enjoyed using mine

Artillery Sidewinder X2 - Review and first prints

I would not recommend this printer. It's extremely finicky and has broken down requiring parts 3 times since purchase. Only 6 months. It's now a brick

It has broken down 3 times within the first 6 months

 Ease of use encompasses everything that is from when you get the printer in the box to getting that first print. You know, can you give this to your grandma? Can you give this to a friend? That'S never done 3d printing. Before that's the kind of focus of this category and with the sidewinder x2, i kind of found it to be a little bit below average. The manual really isn't that great the documentation is a little bit lacking

 A lot slower, you'd see probably a larger gap in that. So just take that into account. So the last category is value now. The way i calculate value is based on a zero to twenty five hundred dollar range, because that is about the range of most hobbyist level: 3d printers

 This printer has a few decent quality of life things it has the filament out sensor. It'S got the auto power off things where it will kind of reset the head, so you can power it back on and resume the print, that's kind of nice. It'S got a usb, it's got. The two usb sticks over there like micro, sd and then the usb card socket

 So it is made to be a larger format printer and it has a couple little bells of whistles like it's got a touch screen and you know fit and finish is overall pretty good and it even has the dual z drive, and you know just some nice Little pieces of fit and finish and i'll get into this in more detail when i actually view the printer, this is sitting around 450, give or take depending on the week in the month, but that's about what it retails for so let's dive straight into ease of Use so what i'm trying to do is boil a 3d printer down into five basic categories, give them a ranking and then kind of give it an overall score. The first one of these categories is ease of use. Ease of use encompasses everything that is from when you get the printer in the box to getting that first print. You know, can you give this to your grandma? Can you give this to a friend? That'S never done 3d printing

 It has a direct drive. Extruder we've got the filament sensor, we've got a touch probe and then even has a volcano style extruder, it's not an actual e3d volcano, but it is similar and i'm to understand that you can use volcano nozzles in this. So it is made to be a larger format printer and it has a couple little bells of whistles like it's got a touch screen and you know fit and finish is overall pretty good and it even has the dual z drive, and you know just some nice Little pieces of fit and finish and i'll get into this in more detail when i actually view the printer, this is sitting around 450, give or take depending on the week in the month, but that's about what it retails for so let's dive straight into ease of Use so what i'm trying to do is boil a 3d printer down into five basic categories, give them a ranking and then kind of give it an overall score. The first one of these categories is ease of use

Artillery Sidewinder X2 Review

notebookcheck.net

Anet A8 vs Artillery Sidewinder X2

Reviews by Topic

Reliability

QUICK QUESTION!

You might also like