Hiking Boots/Shoes Recommendations?

Hiking boot recommendations?

Any recommendations for women's hiking shoes?

[Request] Hiking/outdoorsy style shoes that can handle lots of walking on concrete

Cold and wet weather hiking boots recommendations?

I am in need of a new pair of trail/hiking boots.

Hiking Boots for heavy use during the summer

Good pair of hiking shoes?

[Request] waterproof hiking shoes

[request] - Good quality walking shoes.

Hello Redditors. I'm in search of a classy yet extremely durable pair of hiking boots to take backpacking around the world for 12+ months with.

Hiking boots recommendations

Men's three season "urban hiker" (like Merrell MOAB but longer lasting)

BIFL Hiking boots for women

Hiking boots with good traction and can stand up to abuse.

Looking for a good pair of shoes for my weird feet

Request - Hiking Sandals

Request: Hiking Boots

Comfortable and cushiony shoes for walking on pavement 10KM/couple hours a day (UK)

Hiking sandals that last?

[Request] Powerful dishwasher with sanitize function?

I want the best god damned dishwasher money can buy.

Looking for the best, easiest to operate, cheapest dishwasher - Recommendation?

[Request] Best countertop dishwasher for reasonable price?

Can anyone recommend a good dishwasher?

Countertop/Portable Dishwasher

[Request] Dishwasher &lt;$1k Australian with QOL features and low water use

Dishwasher for Second Home

My friend bought a house with this KichenAid dishwasher from 1974. He says it works better than any of the other ones he has owned. He just has to convince his wife not to replace it.

What's a good Panel ready dishwasher under $1k?

Best socket set on the market $100-$150

[Request] Socket wrenches

I need a recommendation for a tool set that should last a lifetime. [Request]

Looking for a Mechanics tool set.

23 years later; GM Goodwrench socket set.

A Starter/Lifetime Tool set

Basic screwdriver set needed

Mechanic Tools that are BIFL

Trying to fill a tool roll for my truck and would like input on BFL tools like wrenches, pliers, socket sets, etc.

BIFL: Mastercraft ratchet set with lifetime warranty. Got it at 14, im 31. Went thru more abuse than you think!

Looking to upgrade my home hand tools

Was told to post this here. Husky 270pc toolset from Home Depot for $99, normally $199. Lifetime warranty too

[Request] Ratchet/Wrench/Etc tool set for home/bicycle/general use

Thoughts on a Honda Accord V6 2007?

2010 Honda Accord worth the buy?

Thoughts on a 2008 Honda accord v6 coupe EX-L?

2014 honda accord ??

After an initial round of research it seems like Honda Accord Hybrid is the right answer, but I want to pressure test that with you guys

2014 Accord V6 Touring (any thoughts?)

Which car ?

me again. 2010 2dr honda accord, 122k miles for $5,800. just want a reliable first car, thoughts?

Want to buy an Accord, any suggestions?

2020/2021 Honda Accord LX - Tell Me About Your Likes/Dislikes

Compact - Midsize suv

best small/midsize suv?

Looking for a used (06-14) reliable compact/mid-size SUV

compact/mid size suv

Midsize SUV

Recommendations for midsized SUVs to look at

Compact to Mid-Size SUV

Small to mid-size suv suggestions?

Midsize vehicle for three kids

Mid-Size SUV

Just tried a Lotus Elise Cup 250, driving impressions !

Dan Neil reviews Lotus Emira: As Good As It Gets

Considering a Lotus Elise - USA

How affordable are Lotus Elises from the 2005-2012 model year?

Lotus Exige Sport Final Edition review: farewell, Exige

I wanna know everything you know about a 2005 Lotus Elise

My Lotus Evora Review

Lotus retail sales up 24% in best performance for a decade

2022 Lotus Emira Looks to Be One of the Brand's Best

PURCHASING A LOTUS — Need Tips + Advice.

Looking for a good rpg/action adventure with a good story and good characters

Deep long rpgs?

Looking for a story-focused RPG

Looking for a complex RPG

Fantasy games with an detailed and immersive world?

[WSIB] I am in search for a open world RPG that will keep me busy for hundreds of hours.

Open world game with huge map, lots of things to do, and great graphics

WSIB Feeling a bit of an rpg lull and want something exciting like old school BioWare with a engaging story that doesn’t take 100 hours to play.

WSIB: long, immersive games with high quality storytelling and writing

looking for an open-world rpg

[WSIB] A turn based strategy game that isn’t 4X

Turn-based strategy game

Turn-based strategy games

[WSIB] Small-scale, medieval, strategy game, featuring pikemen and cavalry

(WSIB) Turn-based ”wargaming” game

[WSIB] Turn Based Strategy games

WSIB if I want a strategy game for dummies

WSIB Strategic Rpg

[WSIB] Good offline strategy/(ish) games?

What are some good "smaller scale to control, but still feel large scale battle" tactical / strategy games?

Bullet Hell-Type Games: Atomicrops vs. I, Dracula: Genesis vs. Others?

WSIB if i want a completely story driven indie game but have already played undertale and oneshot (preferably similar to those 2)

Post apocalyptic enthusiast, Underrail or Atom RPG?

[SIB] Undermine or Atomicrops

WSIB if I like "Run into things, need to grow in power/special items to move further so I come back after unlocking said element" type of games.

Blsoodborne or Resident evil 2 ?

What should I buy? Animal Crossing: New Horizons or Doom: Eternal

[WSIB] Fast-paced top-down roguelikes?

[SIB] I Hate Running Backwards or Planetary Dustoff? Or something else?

SIB Nuclear Throne?

What can you recommend for minimizing pores?

I know you can’t get rid of pores but I’m wondering is there anyway to make them smaller? I use La Roche Posay products. They keep my acne mostly at bay but I feel like my pores are just so large. Part of it is genetic, but just wondering if there’s anything else I can do at home to help. Thanks!

OPEN PORES- WHAT TO DO? IS THERE ANY PRODUCT I CAN USE?

What skincare products have you used that helped with large pores?

What is the best thing to use to tighten pores on your face?

Can anyone tell me why my pores are so huge and what I can do to minimize them?

How to reduce pores.

Hey guys, how do I make my pores not look like this? Info in comments (deleted and reposted for an error in the title)

Pores reduction tips?

Advice for shrinking pores on and around nose?

[sun care] sunscreen that doesn’t irritate rosacea and perioral dermatitis

[Sun Care] Looking for sunscreen that doesn't irritate Rosacea

Sunscreen recommendations for rosacea

Looking for a sunscreen for my acne prone skin.

[Sun Care] looking for a sunscreen that works well for people with Eczema.

Desperate for a good sunscreen

Looking for a Daily Suncreen

I’ve tried them all and I still can’t find my holy grail for my dry rosacea skin. Any other recommendations?

Sunscreen, eczema and makeup, Help [Sun care]

[Sun Care] Help with not being able to use Sunscreen

How can i stop a really greasy face?

How to best defeat oily skin?

Is there any long-lasting solution for oily face?

Oily Face -&gt; Wash Face -&gt; More Oily

Extremely oily skin

Y’all know some sort of cream or product I can buy to make my face less greasy looking?

super oily face help needed

Oily Skin— please help!

Really oily skin

How to have less oily skin?

Adrian Krebs

Johannes Engler

Tavis Lochhead

The 3Doodler Start+ Essentials pen set combines art and design with technology in a fun and creative way. It's easy-to-use, uncomplicated technology drives engagement and comprehension of critical STEM subjects. Young learners ages 6-13 years old will thrive when they experience what it’s like to use their hands and minds as they bring their ideas to life in 3D! Designed with no external hot parts. With the press of a button, plastic extrudes and hardens rapidly allowing kids to literally create anything! 3Doodler is the proud recipient of the Toy of the Year 2017 (Rookie category), and winner of numerous awards including Good Housekeeping’s 2016 Best Toy Award, The Oppenheim Toy Portfolio Platinum Award, National Parenting Product Award, Scholastic Parent & Child GOLD STAR TOY Award, and Toy Insider STEM 10 to name a few.

Wirecutter

Though slow and lacking in features compared with traditional 3D pens, the Start is cool to the touch, making it safer for kids younger than 12.

michaels.com

target.com

amazon.com

TTPM Toy Reviews

 The finished crafts were flimsy unless you do a lot of layering so not sure how long they will last. While the patterns were cute, my 9 year old struggled to make the normal outlines-definitely would not be able to do a 3D one without some adult help and maybe the available app. She wasted a lot of materials changing colors - you have to let all the old color flow through to get the new one so not super easy to go back and forth between colors. Not bad overall, just not as fun as they thought it would be based on the projects shown on the box

 She wasted a lot of materials changing colors - you have to let all the old color flow through to get the new one so not super easy to go back and forth between colors. Not bad overall, just not as fun as they thought it would be based on the projects shown on the box.

I really wanted to like this as our family loves craft based activities. It was fun for a bit but I can’t see my kids pulling this out on their own to use regularly. The finished crafts were flimsy unless you do a lot of layering so not sure how long they will last. While the patterns were cute, my 9 year old struggled to make the normal outlines-definitely would not be able to do a 3D one without some adult help and maybe the available app

 My 5 year old struggled, but enjoyed it with guidance. the catch: You must use their special filaments and they are outrageously expensive! Their website shows huge projects or projects (a large bridge and a vehicle small enough to fit in your hand) that require several of their proprietary sticks. We’re talking $.25 a stick that lasts maybe 5 minutes! However if you are concerned about your kid burning themselves and have lots of extra $$$ for the special filament, this pen is a great idea

proprietary filament is prohibitively expensive

 For the price, I would expect 5 times this much.  We will not be using this 3Doodler now that these are gone.

Ridiculous price for a few sticks of plastic. Doesn't go far.

 I contacted the company who was immediately responsive and sent us a replacement. We sent the pen back to them where they determined what the issue was so they could help us prevent it from happening in the future. The tip they provided was a critical piece of information- which leads to the next comment- I wish there was more in terms of direction and tips in the book that came with the tool. The documentation could be bulked up for troubleshooting help

 The tip they provided was a critical piece of information- which leads to the next comment- I wish there was more in terms of direction and tips in the book that came with the tool. The documentation could be bulked up for troubleshooting help.  Otherwise- we love this pen. I would highly recommend it for a gift

Great for kids

I got this as a gift for my 8-year-old crafty niece and she really loved it. It came with the pen, a mat, an instruction book with some templates and some filament. I also bought her a large pack of replacement filament, but it didn't work with this pen. The reason I gave it 4 stars instead of 5 is because it doesn't work with the non-brand name filament and because each time she used it, it ran out of battery

 I also bought her a large pack of replacement filament, but it didn't work with this pen. The reason I gave it 4 stars instead of 5 is because it doesn't work with the non-brand name filament and because each time she used it, it ran out of battery. She could have sat there for HOURS creating if the battery allowed it. I would estimate it lasted about 30 minutes

Best gift ever!  (but the battery life isn't very long)

 It’s clearly satisfying something inside of her, and I love that it’s in the form of art and engineering. You’re not going to get high quality prints but that’s not really the point. Also, this doesn’t have anywhere that will burn the kids. You could print the plastic straight onto your hand and be fine, so I can let the kids play with it without me watching over them and there have been no complaints of heat

Fun fun fun

target

bazaarvoice

yotpo

expert-review

The Best 3D Pen

Best for Most

The First Mission to Discovery is here with the Monoprice Cadet 3D Printer. Suitable for anyone looking to embark on a 3D printer journey, this printer is perfect for both beginners and experienced users. Features a compact design and easy set up instructions, allowing you to start printing almost immediately.

The MP Cadet is cheap, reliable, and small enough to fit on any desk.

walmart.com

pcmag.com

Kongs-R-Us

Clever Dad

3D Printing Nerd

 but I did pay money for this. it was not given to me and I did get a really good price. so I'll let you know at the end of the video. um how I got that

 Let's take a look Mp Cadet select button and we're going to do print from Sd and then here. we should be able to find the spool holder Mpc Cadet spool holder and I'll have a link to this one in the description. I can hit print and there we go. It will start printing for us

 We go from the top of the printer you have 3p Mp Cadet is showing the temperature of the nozzle disconnected from wi-fi and that is all I know. There would normally be a wizard on this from the very beginning. However, I believe this since the way I received this printer, this is going to be a little bit different than normal. So I want to go ahead and feed some filament in

 On this side you have where the power cable will plug in and the Usb cable right here. I have the power cable which I can go ahead and put in. This power cable actually has a switch on the front on the side of it that will allow you to turn it off and on from the power so it's not running all the time. Let's go ahead and power it on here

 And here is the cat that was on the printer already and it looks like it's good print quality. I wouldn't know since I've never printed before. I didn't know these were hollow on the inside either, but that's what was already on the printer. But I want to go ahead and test whether or not this printer actually will work for us

Should you buy MonoPrice Cadet 3D Printer???

 Auto bed leveling is done via this inductive sensor and it's capable of wireless printing via their Wii builder - Slicer or mobile app on iOS and Android Unfortunately, I Couldn't get the cadet to talk to my wireless network at all so I couldn't test the wireless printing the app used to configure. It is not good. It feels like it's incomplete. almost like a software developer was programming really hard and got to 80% of where they needed to be

 The bed is not heated and it's only as warm as ambient temperature. This means ideally the Cadet is meant for PLA printing and their website confirms it. Auto bed leveling is done via this inductive sensor and it's capable of wireless printing via their Wii builder - Slicer or mobile app on iOS and Android Unfortunately, I Couldn't get the cadet to talk to my wireless network at all so I couldn't test the wireless printing the app used to configure. It is not good

Is This Printer Too Small? Monoprice Cadet 3D Printer Review

 When it was done, I had a little cartoony looking dragon.  The next step was to try downloading a model from thingiverse and sending it over the network to the printer. I downloaded the app to my phone and used it to set up the WiFi details on the printer. With the coronavirus epidemic in full swing, I decided to print some clips to be used for making your own face mask

 The printer is supposed to work with Cura (and it's available in the downloads section on the Monoprice website), but I could never get the software to connect to the printer over wifi. It doesn't see the printer on the network, and I can't even get it to recognize the printer when I point to its IP address. I've tried different versions of Cura as well, with no success. Luckily, WiiBuilder seems to do everything I need it to, so I don't really miss Cura

  Finally, there's the software. WiiBuilder has worked well for me but is rather poorly made, it feels old and clunky and is in dire need of some usability updates and some time in front of a UI expert. The printer is supposed to work with Cura (and it's available in the downloads section on the Monoprice website), but I could never get the software to connect to the printer over wifi. It doesn't see the printer on the network, and I can't even get it to recognize the printer when I point to its IP address

Excellent first 3D printer

 The Cadet's tiny print area limits the size of printed objects. I scaled one of our standard test objects, which combines geometric shapes and raised text, down to 60 percent of its normal size. To my surprise, except for a couple of rough spots, it printed well despite its miniaturization. Overall print quality for the Cadet was impressive considering the printer's low price

 A setup glitch, its minuscule build volume, and its awkward filament handling keep it from wresting our budget 3D printer Editors' Choice from the XYZprinting da Vinci Mini. Still, it's easy and safe to use and consistently produced objects of good print quality in our testing. 

While testing and reviewing products at home rather than in PC Labs, I have been acutely aware of the dimensions of products and their packaging, in determining how and where to fit them in my New York City apartment. While 3D printers often come in ginormous boxes, the Cadet is a fortunate exception, arriving in a relatively tiny 16.7 by 11.4 by 11

I printed a selection of our standard test objects as well as several files included with the printer. Except for the abovementioned filament snag, there were no misprints, and print quality was uniformly good. The Cadet's tiny print area limits the size of printed objects. I scaled one of our standard test objects, which combines geometric shapes and raised text, down to 60 percent of its normal size

Monoprice Cadet 3D Printer Review

walmart

cnet.com

3Doodler Start vs Monoprice MP Cadet

QUICK QUESTION!

You might also like